CS Paper Radar

Analyzing Condensation on Patterned Surfaces via Deep Learning

Tae E. Cooper, Michael Gee, Sheila Whitman, Jemma Dengel, Anthony Katselas, Duygu Dengiz, Frank Keutsch, Joanna Aizenberg

cs.LG ·submitted 2026-10-29 02:16 UTC · v1
unusual

Abstract

Dropwise condensation is key to power and water systems. State-of-the-art condensation surfaces are often inhomogeneous, either patterned by design or random defects. Inhomogeneous surface features dictate the rates of each stage of dropwise condensation-nucleation, growth, coalescence, and shedding. Characterizing these rates requires the precise detection of thousands of droplets. Yet, existing segmentation methods are unable to detect droplets on inhomogeneous surfaces. We developed TileSAM3, a universal droplet segmentation tool built on the Segment Anything Model 3 (SAM3). Hierarchical tiling with per-tile inference followed by post-processing extended SAM3's detection cap and raised the effective resolution of small droplets. We created two datasets: High Quality Droplet Dataset (N=365,826; HQDD) with homogeneous surfaces and Low Quality Droplet Dataset (N=63,577; LQDD) with patterned, defect-laden surfaces under adverse lighting. TileSAM3 closely reproduced thresholding annotations on HQDD, surpassed it over sixfold on LQDD (Average Precision 0.57 versus 0.088), and outperformed other deep learning models on all metrics evaluated. Combined with KD-tree tracking, TileSAM3 identified localized nucleation and coalescence in narrow active bands on a stiffness-patterned surface. TileSAM3 enables analysis of understudied inhomogeneous substrates with poor lighting and videography which facilitates faster, lower cost research of condensation materials.

Comment
13 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Learning from synthetic photorealistic raindrop for single image raindrop removal

cs.CV ·2026-09-29 ·Zhixiang Hao, Shaodi You, Yu Li, Kunming Li, Feng Lu
publishedhighly cited similarity 0.55
Abstract · 2019 IEEE/CVF International Conference on Computer Vision Workshop (ICCVW)

Raindrops adhered to camera lens or windshield are inevitable in rainy scenes and can become an issue for many computer vision systems such as autonomous driving. Because raindrop appearance is affected by too many parameters, therefore it is unlikely to find an effective model based solution. Learning based methods are also problematic, because traditional learning method cannot properly model the complex appearance. Whereas deep learning method lacks sufficiently large and realistic training data. To solve it, in our work, we propose the first photo-realistic dataset of synthetic adherent raindrops for training. The rendering is physics based with consideration of the water dynamic, geometric and photometry. The dataset contains various types of rainy scenes and particularly the rainy driving scenes. Based on the modeling of raindrop imagery, we introduce a detection network which has the awareness of the raindrop refraction as well as its blurring. Based on that, we propose the removal network that can well recover the image structure. Rigorous experiments demonstrate the state-of-the-art performance of our proposed framework.

0.54

Neural Centroidal Voronoi Tessellations

cs.GR ·2026-09-08 ·Jiacheng Xu, Bo Pang, Rui Xu, Xiaocheng Zhang, Yang Liu +3 more
similarity 0.54
Abstract

Centroidal Voronoi tessellation (CVT) is a fundamental primitive for high-quality surface sampling and isotropic remeshing in computer graphics. However, computing surface CVTs with classical solvers remains expensive: each optimization step repeatedly constructs restricted Voronoi diagrams (RVDs) and integrates quantities over their surface cells. We introduce Neural CVT, a learning-based surface-CVT solver that replaces these costly geometric computations with a recurrent neural optimizer, accelerating CVT optimization by one to two orders of magnitude in our benchmarks while preserving geometric fidelity. Given an input surface, we sample a dense point cloud and extract multi-scale geometric descriptors with a graph neural encoder. A lightweight recurrent optimizer then refines seed positions over a small number of iterations, aggregating interpolated surface features and optimization history to predict per-seed displacements. The framework is trained self-supervised using CVT objectives that promote uniform distributions and, when desired, feature alignment. Across diverse organic and CAD-like shapes, Neural CVT generalizes to unseen geometry, initialization strategies, and seed densities, producing isotropic, feature-preserving remeshes comparable to state-of-the-art offline optimization methods at a fraction of the computational cost. Code and trained models will be released.

0.25

nnMNet: Baseline for Martian Terrain Semantic Segmentation

cs.CV ·2026-08-30 ·Ming-Han Lee, Chi-Yeh Chen
benchmarkcode/data similarity 0.52
Abstract

Semantic segmentation is a crucial task for understanding Mars, the most Earth-like planet in our solar system. However, it is challenging because the Martian surface is highly unstructured and complex, making accurate pixel-level prediction and fine-grained annotation difficult. Recent advancements in deep learning have introduced numerous methods and datasets to address these challenges. Nevertheless, the field lacks a robust, publicly available, and reproducible baseline, as well as a unified benchmark to facilitate fair evaluations. In this work, we present nnMNet, a new baseline model designed for Martian terrain semantic segmentation. Building upon nnWNet, we integrate linear attention to better capture global context and employ lightweight convolutions to reduce computational overhead. To bridge the gap between local and global representations, we introduce the Spatially-Aware Fusion Block (SAFB), which augments and combines features with diverse characteristics. Furthermore, we establish a new benchmark by curating and standardizing three high-quality datasets for thorough evaluation. nnMNet achieves new state-of-the-art 86.61%, 83.25%, and 88.24% mIoU on SynMars-TW, SynMars-Air, and MarsScapes, respectively. Our code, models, and datasets are publicly available at https://github.com/dereklee0310/nnMNet.

0.29

BenthicFlow: Generating Extensible Underwater Environments via Flow Matching

cs.CV ·2026-08-24 ·Joaquín Figueira, Camile Lendering, Manfred Gonzalez-Hernandez, Giacomo D'Amicantonio, Erkut Akdag +1 more
publishedcode/data similarity 0.52
Abstract · Accepted to ECCV 2026 in the 2nd Workshop on Marine Vision

Computer vision applications for 3D scene understanding in underwater environments remain challenging due to the lack of high-quality 3D data and the inability of surface-trained models to generalize to underwater scenes. To address this challenge, an emerging trend is to employ generative models to close the data domain gap. However, existing methods assemble large scenes by stitching independently generated tiles post hoc with separately trained models, while demonstrating heterogeneous landscapes only within individual survey sites. We introduce BenthicFlow, a unified framework based on a single conditional flow-matching model that jointly generates aligned textures and depth maps. A MultiDiffusion-inspired sampling procedure reconciles overlapping windows throughout the generative trajectory, enabling spatially extensible RGBD mosaics without a separate stitching model. The generated mosaics are subsequently lifted into explicit 3D benthic environments using surface-aligned Gaussian surfels. Experiments across geographically distinct survey sites demonstrate that BenthicFlow preserves site-specific appearance while generating coherent, large-scale 3D scenes that closely match the target distributions. Code and trained models are available at https://github.com/jacomof/BenthicFlow.

0.47

Provisioning Robust and Efficient LiDAR Perception for Autonomous Driving

cs.CV ·2026-10-20 ·Tingxu Han, Zijie Shen, An Guo, Lyuke Wang, Chunrong Fang +2 more
code/data similarity 0.52
Abstract

LiDAR-based 3D object detection is a core perception service for autonomous driving, but deployment requires robustness to point-cloud corruption while meeting latency and memory requirements. Existing approaches address robustness and resource efficiency separately, resulting in compact detectors that are fragile under corruption or robust detectors that remain costly to deploy. We therefore formulate LiDAR perception provisioning as constructing a detector that remains accurate under point-cloud corruptions while meeting constraints on inference latency and peak GPU memory. To achieve robustness, we first craft corrupted samples that mimic extreme weather conditions. Then we train candidate detectors offline by ordering clean and corrupted samples by perturbation sensitivity, through which detectors learn more from hard corrupted samples. We estimate perturbation sensitivity using an ensemble of seven heterogeneous 3D detectors by tracking changes in confidence, BEV overlap, and unmatched detections. To improve efficiency, we narrow the network and use offline neighborhood-density measurements to determine how many points and neighbors each sampling stage processes. We evaluate our method using AP (Average Precision) under clean and corrupted conditions, inference latency, and peak allocated GPU memory. On KITTI for Car detection with PointRCNN, our method improves Moderate AP under corruption by 3.32 points over the original detector while reducing mean latency by 19.8% and peak allocated GPU memory by 53.9%. Across two datasets, two detector architectures, and three object classes, our method improves AP under corruption by 4.03 points on average over the corresponding original detectors, while reducing mean inference latency and peak allocated GPU memory by 14.4% and 38.0%, respectively. Our code is available at https://github.com/drunklibai/robust-efficient-lidar-perception.

0.20

Deep Learning Super Resolution for Satellite Cloud Mask Downscaling

cs.CV cs.AI ·2026-08-25 ·Angelos Georgakis, Valentina Kanaki, Giorgos Giannopoulos, Stella Girtsou, Ioannis Kontogiorgakis +2 more
publishedhot direction similarity 0.51
Abstract · Accepted for 2026 IEEE International Geoscience and Remote Sensing Symposium (IGARSS 2026)

A vast amount of optical satellite data is being transmitted to Earth-based servers every day, and more than half of this data is affected by haze or clouds. Additionally, this data suffers from the fundamental trade-off between spatial and temporal resolution, which remains largely unresolved, making the acquisition of continuous high-resolution satellite observations of clouds an ongoing challenge. This work addresses this challenge by proposing two Deep Learning super-resolution methods for the accurate downscaling of SEVIRI cloud mask products, as well as a novel cross-sensor cloud mask dataset called SEVMOD-CM, created by spatially and temporally matching MODIS and SEVIRI satellite observations. The two proposed models are a CNN-based (SpatialCNN) and a GAN-based (SpatialGAN) Neural Network. Trained on the SEVIRI spectral and cloud mask products, the proposed methods predict the corresponding MODIS Cloud masks, achieving a 4x spatial enhancement across sensor domains. Both approaches are evaluated experimentally, and compared against the standard bicubic interpolation upsampling technique. The experimental results demonstrate the value of the proposed models and dataset for the remote sensing community, highlighting the benefits of applying super-resolution techniques to geostationary-derived cloud mask products for applications such as atmospheric monitoring, weather forecasting, disaster risk reduction, solar energy forecasting, and climate research.

0.46

DeepTopoClustering: Unsupervised Derivation of Surface Process Taxonomy from 4D Point Clouds for Topographic Monitoring

cs.CV cs.LG ·2026-10-07 ·Jiapan Wang, Daan Hulskemper, Mathilde Letard, Roderik Lindenbergh, Katharina Anders
similarity 0.51
Abstract · Submitted to ISPRS Journal of Photogrammetry and Remote Sensing

4D point clouds acquired by permanent laser scanning (PLS) enable accurate high-frequency monitoring of surface change in dynamic topographic environments. However, existing methods remain limited in organizing detected surface activities into meaningful process types. We propose DeepTopoClustering (DTC), an unsupervised framework for deriving a hierarchical process taxonomy from object-based surface activities, so-called 4D objects-by-change (4D-OBCs). We transform each 4D-OBC into a GeoMorphogram, a distributional sequence representing the temporal evolution of topographic change within a spatially bounded surface activity. A convolutional autoencoder learns latent embeddings from GeoMorphograms, which are jointly optimized using a hierarchical deep clustering objective to organize surface activities into a hierarchy. We evaluate the learned hierarchy using expert annotations on two 4D datasets of sandy beach sites and their combination. DTC with GeoMorphograms achieves the highest agreement with expert judgment at the taxonomy level comprising eight major process types ($F_1=0.78$, match accuracy $=0.92$), outperforming dimensionality reduction and conventional flat clustering. The learned taxonomy separates major erosion- and deposition-dominated activities and distinguishes finer subtypes based on change magnitude, duration, compactness, and temporal evolution. DTC thus provides a scalable and interpretable route from 4D change detection to a data-driven, expert-supported surface process taxonomy, advancing automated knowledge derivation for understanding surface dynamics in topographic monitoring.

0.22

GridFlow: Structured Latent Flow for Seamless City-Scale 3D Point Cloud Generation

cs.CV ·2026-08-30 ·Xinyu Wang, Muhammad Ibrahim, Atif Mansoor, Ajmal Mian
top venuebenchmarkcode/data similarity 0.51
Abstract

Generating realistic 3D city environments from remote sensing data is important for simulation, urban planning, and mixed reality, yet existing point cloud generation methods are limited to single objects or bounded indoor scenes and cannot handle the scale, seamless tiling, and partial observability challenges of city-scale generation. We present \ours{}, a multi-stage framework that generates dense, colored point clouds ($10^5$ points per $150\text{m}{\times}150\text{m}$ tile) at city scale, conditioned on satellite imagery, semantic segmentation maps, and digital surface models (DSM). A \emph{Grid-Aligned VAE} encodes each tile into a topology-preserving latent grid where tokens correspond to fixed spatial regions, enabling spatially coherent multi-modal conditioning and compact latent-space edge consistency that implicitly aligns thousands of boundary points for seamless cross-tile generation. A conditional rectified flow model synthesizes geometry latents from the fused multi-modal conditions, and an orientation-aware diffusion colorizer separately handles satellite-visible horizontal surfaces and occluded vertical façades. To support standardized evaluation, we build on public 3D data sources to introduce \emph{City3D-MultiGen}, a benchmark of $163$K densely annotated tiles from Melbourne and London with aligned point clouds, satellite images, semantic maps, and elevation data. Experiments show that \ours{} outperforms adapted point cloud generation baselines across all geometry metrics and produces visually coherent colored point clouds with seamless boundaries over arbitrarily large urban extents. Our benchmark details are available at https://huggingface.co/datasets/e32/City3D-MultiGen

0.56