CS Paper Radar

Enabling Dynamic Resource Scaling in Quantum Circuit Simulations

Íñigo Aréjula-Aísa, Sergio Iserte, Petter Sandås, Ricard S. Raigada-García, Oliver Brown, James Richings, Antonio J. Peña

cs.DC ·submitted 2026-10-29 11:07 UTC · v1

Abstract

Studies of quantum algorithms often simulate se- quences of circuits whose number of qubits changes from one circuit to the next, such as instances of increasing size of the same problem. Since each additional qubit doubles the state- vector, every circuit needs a different number of nodes, which a fixed allocation on a shared High-Performance Computing (HPC) system cannot provide: a job sized for the largest circuit leaves most of its nodes idle, and one job per circuit adds scheduler interactions and queue waits. We make the QuEST state-vector simulator malleable with the Dynamic Management of Resources (DMR) framework, so that a single job resizes between circuits. Because no state-vector exists between circuits, reconfigurations require no data redistribution and no changes to the simulation kernels, and a checkpoint holding the index of the next circuit is enough to resume. A right-sizing policy derives the number of nodes from the number of qubits, and the circuit_executor API hides reconfigurations from the user. We evaluate the reconfiguration overhead on MareNostrum 5 and show that a single job can run a batch of circuits of different sizes, adapting its allocation to each of them with negligible overhead.

Closest papers

Nearest neighbours by meaning across the whole index.

Communication-Aware Qubit Placement and Automatic Node-Count Allocation for Distributed State-Vector Simulation

cs.DC cs.ET ·2026-10-07 ·Íñigo Aréjula-Aísa, Sergio Iserte, Petter Sandås, Ricard S. Raigada-García, Antonio J. Peña
similarity 0.77
Abstract

Quantum circuit simulation enables the execution of large-scale quantum algorithms by partitioning qubits across multiple computational nodes. However, an inefficient qubit placement leads to excessive inter-node communication, limiting performance and scalability. This work introduces a framework that computes a communication-aware qubit placement offline, minimizing data exchange among nodes, and selects, before circuit execution, the largest node count whose performance degradation stays below a user-defined threshold. The framework is integrated with the QuEST simulator. Evaluations on synthetic benchmarks and real-world QASMBench circuits show that optimized placements reduce communication and achieve runtime speedups of up to 2.3x over the identity placement, particularly in circuits with sparse, structured interactions. Our results show that qubit placement strongly affects the efficiency of distributed simulation and provide a practical, resource-scalable solution for quantum workload

0.30

Resource-Aware Scheduling for Distributed Quantum Computing

cs.NI ·2026-10-21 ·Connor Howe, Raghav Mundada, Jake O'Shaughnessy, Ibrahim Abdullahi, Ali Anwar
similarity 0.76
Abstract

Distributed quantum computing (DQC) is a promising near-term approach for executing circuits that exceed the capacity of a single quantum processing unit (QPU). Prior work has made significant progress on circuit partitioning and reconstruction, but practical DQC requires more than cutting a circuit into smaller pieces. A runtime system must determine whether to execute the circuit intact, cut it for sequential execution on one QPU, or distribute it across multiple QPUs, while accounting for queueing, communication, reconstruction, and hardware constraints. We present a resource-aware scheduler for DQC that compares these execution alternatives at runtime using explicit models of QPU execution, communication, and host-side reconstruction, together with hardware-informed timing derived from simulated IBM QPUs. By treating communication and reconstruction as first-class scheduling costs, the scheduler selects execution plans using a more realistic view of end-to-end overhead than cutting-only approaches. Across our experiments, reconstruction accounts for over 83% of cutting overhead, distributed execution reduces P90 latency by up to 39% relative to uncut single-QPU execution, and scheduling overhead itself remains negligible, never exceeding 0.038% of end-to-end job latency. Together, these results show that DQC must be treated as a runtime scheduling problem over both quantum and classical resources, not just circuit partitioning.

0.15

Online Scheduling and Distribution of Quantum Circuits over Quantum Networks

cs.ET quant-ph ·2026-10-19 ·Yukun Yang, Himanshu Gupta
published similarity 0.71
Abstract · 8 pages, 5 figures. Full author version revised after acceptance; the QCNC 2026 version was shortened to meet the conference page limit

Emerging quantum networks enable distributed quantum computing (DQC) by interconnecting modest, noisy quantum processors. However, practical deployments face tight memory budgets, probabilistic entanglement generation, and decoherence, all while serving multiple users. In realistic settings -- cloud execution, iterative/interactive workloads and concurrent jobs -- circuits do not arrive in a single batch but as a stream. This creates a fundamentally online problem: the system must react to stochastic arrivals, balance latency and throughput, and remain stable under varying loads without foresight of future jobs. We study Online Scheduling and Distribution of Quantum Circuits (OS-DQC) and formalize the online scheduling problem for quantum networks: circuits arrive over time and must be executed without knowledge of future arrivals. At each event time (arrival or completion), the system decides which waiting circuits to launch and how to place their qubits, while accounting for congestion from in-flight circuits and constraints due to finite memories and decoherence. The objective is to minimize the mean completion time and makespan under these physical and resource constraints.

0.33

Towards Continuous Profiling and Optimization of Quantum-Classical Pipelines

cs.ET quant-phcs.OS ·2026-09-05 ·Ayush Bansal, Owen Cochell, Santiago Núñez-Corrales, Marcos Frenkel, Seetharami Seelam +2 more
similarity 0.71
Abstract

Quantum applications increasingly execute as multi-stage quantum-classical pipelines, interleaving QPU computation with classical stages like circuit generation, transpilation, layout mapping, quantum error mitigation (QEM), and post-processing. These stages have diverse resource requirements and exhibit stochastic behavior under drifting hardware noises, yet existing workflow frameworks treat them as static, isolated components. We present LLQM (Low-Level Quantum Machine), a profiling-driven meta-framework for quantum-classical pipelines. LLQM decomposes pipelines into fine-grained tasks and continuously profiles their CPU/GPU, memory, QPU, and queue dependencies alongside real-time hardware states. This unified runtime abstraction captures cross-stage resource dependencies and reveals how classical and quantum decisions interact, enabling characterization of their impact on fidelity and resource consumption. We evaluate LLQM using QEM as a representative pipeline stage, on IBM 156-qubit Heron r2 processors with circuits up to 100 qubits and 1e7 transpiled gates. Our results show that continuous profiling exposes runtime bottlenecks and enables hardware-, fidelity-, and workload-aware optimizations.

0.17

Towards Reproducible Evaluation of Distributed Quantum Circuit Partitioning Algorithms

cs.DC quant-ph ·2026-08-27 ·Javier Vela-Tambo, Davud Azizov, Tian Guo
code/data similarity 0.69
Abstract · Accepted at IEEE QCE 2026 Workshop: Distributed Quantum Computing Systems and Infrastructure

Distributed Quantum Computing (DQC) addresses the physical scaling limitations of monolithic quantum processors by networking modular Quantum Processing Units (QPUs). Efficient execution of quantum algorithms on DQC architectures requires compiling them across QPUs while minimizing inter-QPU communication bottlenecks, primarily through circuit partitioning. However, current evaluations of state-of-the-art partitioning heuristics focus primarily on the total entanglement cost of the partitions, failing to capture the broader structural and temporal overheads introduced by distributed network constraints. This paper addresses this evaluation gap by applying established monolithic benchmarking metrics to partitioned distributed circuits to quantify the performance impact of network constraints. Using an open-source, automated evaluation pipeline, we systematically assess diverse partitioning algorithms across standardized workloads and quantum network topologies. Our empirical results reveal that partitioning algorithms with comparable entanglement costs can still introduce drastically different physical execution penalties. By exposing these hidden trade-offs, such as severe increases in circuit depth and substantial reductions in gate density, this study demonstrates that comprehensive circuit-level metrics are essential for guiding the future design of DQC compilers.

0.21

SemQBench: Benchmarking Decomposition-Aware Runtime Policies for Quantum-HPC Search

cs.ET ·2026-10-16 ·Chandrachud Pati, Yogesh Simmhan
published similarity 0.69
Abstract · To Appear in the Proceedings of the 2nd International Workshop SFWM, co-located with SC26

Quantum processors are increasingly used as accelerators inside high-performance computing (HPC) workflows. A workflow runtime decides which quantum circuits to run, how to group them into provider jobs, and what to repeat after a failed attempt. Many search problems split into independent parts, but the runtime can use that structure only when the workflow exposes the parts and a validity check for each one. SemQBench measures what a runtime gains from this visibility. It compares seven execution policies for the same search problem, including two controls without amplitude amplification. The policies change one runtime choice at a time: whether to amplify, whether partial results may be combined across runs, whether the parts share one circuit, and what a retry keeps. We run them on the 20-qubit IQM Garnet processor using 106 distinct circuits in three jobs, and report circuit executions, active device time, and provider jobs separately before combining them in a cost model. Amplifying the problem as one whole circuit shows no statistically clear gain over random sampling and uses 6.7-104$\times$ more active device time. Exposing the parts and collecting valid partial results across a fixed batch of runs cuts the executions needed for 95% completion confidence by 2.20-4.00$\times$, and this policy is never worse than the other amplified policies in executions, device time, or jobs; it is selected in 99 of 108 overhead settings. Fewer executions do not always mean less device time: on one workload, executions fall from thirteen to four while active device time rises from 7.44 to 9.81 $μ$s. Exposing problem structure therefore gives the runtime a strong default policy and the measurements needed to decide when the simpler unamplified option is cheaper.

0.22

SeQUeNCe.DQC: Full-stack Simulation of Distributed Quantum Computing

cs.NI cs.DCquant-ph ·2026-10-29 ·Sanjay Suresh, Caitao Zhan, Joaquin Chung, Rajkumar Kettimuthu
benchmark similarity 0.68
Abstract · 6 pages, 6 pages

Distributed quantum computing (DQC) connects multiple quantum processing units to overcome the scale limits of monolithic hardware. We introduce SeQUeNCe$.$DQC a new top-level module within the SeQUeNCe package that compiles monolithic circuits into topology-aware execution plans and coordinates their execution using SeQUeNCe's existing quantum-network modules and protocols. We validate SeQUeNCe$.$DQC by reproducing a two-node trapped-ion Grover experiment in simulation and comparing success probabilities with the reported 71% benchmark. We then evaluate how compiler strategy, topology, and memory capacity jointly govern distributed circuit execution time and success rate. In these experiments, our hybrid compilers successfully identified mixed TeleGate/TeleData execution plans that outperformed pure gate-teleportation strategies. By capturing the physical overhead of distributed quantum primitives, SeQUeNCe$.$DQC provides a rigorous platform for co-designing DQC software and hardware architectures.

0.07

Enabling Hybrid HPCQC Workflows with a Heterogeneous Software Stack

cs.DC quant-phcs.SE ·2026-08-14 ·Muhammad Nufail Farooqi, Minh Chung, Burak Mete, Eric Mansfield, Bernd Hoffmann +3 more
publishedcode/data similarity 0.67
Abstract · Presented at the Cray User Group conference (CUG26). Conditionally accepted for the ACM International Conference Proceedings Series (ICPS)

In this work, we demonstrate hybrid High Performance Computing-Quantum Computing (HPCQC) workflows on a production petascale system. The demonstration combines three components: the SuperMUC-NG supercomputer at the Leibniz Supercomputing Centre (LRZ), a 20-qubit superconducting quantum processor provided by IQM Quantum Computers (IQM), and Munich Quantum Valley (MQV)'s Munich Quantum Software Stack (MQSS). Integrating quantum processors into High Performance Computing (HPC) systems requires a heterogeneous software stack capable of orchestrating classical and quantum resources within established supercomputing workflows. MQSS treats Quantum Processing Units (QPUs) as scheduler-managed accelerators and it performs resource coordination following a two-level scheduling scheme. Slurm performs system-level allocation by exposing QPUs as Generic RESources (GRES), while the MQSS Quantum Resource Manager & Compiler Infrastructure (QRM&CI) performs just-in-time compilation and subsequent dispatch of quantum circuits. To integrate with existing HPC operations without modifying the scheduler core, MQSS introduces an open-source SLURM Plugin Suite based on Prolog/Epilog scripts and SPANK modules. Experimental results show that hybrid HPCQC workflows can be executed without significant latency overhead compared to conventional workloads. The presented architecture provides a portable integration model for quantum accelerators on large-scale HPC systems and is directly applicable to next-generation Hewlett Packard Enterprise (HPE) Cray platforms, including LRZ's upcoming 'Blue Lion' supercomputer.

0.35