CS Paper Radar

Neural Blind Deconvolution for Image Scanning Microscopy

Eliot Guez, Nathan Buskulic, Lisa Cuneo, Luca Calatroni, Giuseppe Vicidomini

cs.CV ·submitted 2026-10-29 13:57 UTC · v1

Abstract

Image scanning microscopy (ISM) acquires one scanned image per detector element, which are then fused into a single image by multi-image deconvolution to obtain a super-resolved image. Its accuracy, however, depends on point spread function (PSF) models that sample- and system-induced aberrations often invalidate. Since differences between the scanned images encode aberration information, we propose a training-free blind Deep Image Prior (DIP) framework that jointly estimates the specimen and the detector-dependent PSFs. The PSFs are parametrised through the detector geometry and shared excitation and emission PSFs, reducing the unknowns while preserving the physical ISM model, and a Gaussian pre-initialisation stabilises the blind optimisation. On experimental tubulin data, blind DIP recovers finer filamentous structures than multi-image deconvolution and DIP with fixed theoretical PSFs, while adapting the PSFs to the measurements.

Comment
4 pages, 2 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Image Reconstruction from Phase with Untrained Neural Priors

eess.IV cs.CV ·2026-09-25 ·Ene Meco, Ahmet Enis Cetin
similarity 0.62
Abstract

Fourier phase encodes important spatial image structure, but recovering an image without measured spectral magnitude requires additional constraints and leaves absolute intensity ambiguous. We propose a projection-based two-stage framework that combines Fourier-phase and spatial-support constraints with an image-specific neural prior. The first stage alternates constraint enforcement with regularized neural-prior updates, while the second performs phase/support refinement alone with guaranteed convergence. We evaluate two neural-prior implementations on the same 77 microscopy images and compare them with a constraint-only baseline. After 500 final refinement passes, the best-performing variant achieves 31.41 dB pooled PSNR, 35.75 dB mean PSNR, and 0.9531 mean SSIM, improving pooled PSNR by 1.51~dB and reducing pooled MSE by 29.3% relative to the baseline. The results demonstrate the benefit of combining neural guidance with explicit constraint refinement at the evaluated iteration budget, while showing that lower phase residual alone does not guarantee greater reconstruction accuracy.

0.16

Blind Deconvolution of Binary and Pattern Images with Pixel Intensity Constraints and Sparse Gradient Prior

cs.CV math.OC ·2026-09-20 ·Qinghua Zhang, Xuesong Yang, Liangtian He, Liang-jian Deng, Jun Liu
similarity 0.59
Abstract

Blind image deconvolution (BID) is a prominent research topic in the field of imaging sciences, given its significant practical applications. Most existing model-based BID methods focus on natural images, incorporating appropriate prior knowledge about both the underlying image and the blur kernel. However, for certain classes of images, such as barcodes, text, and patterns, pixels can only take very limited values, a specific prior that is often overlooked in the literature. In this article, we introduce a novel pixel intensity constraint to leverage this important information, improving recovery performance for these specialized image classes. Specifically, we propose a unified framework for blind binary and pattern image deconvolution that incorporates both the pixel intensity constraint and a gradient sparsity regularizer. Numerical experiments demonstrate that our method outperforms many existing BID techniques, achieving superior results in terms of both visual quality and quantitative metrics.

0.18

ZoomSEM: accelerating large-scale brain connectomics with intelligent SEM super-resolution

cs.CV ·2026-10-24 ·Jiateng Shou, Zhiwei Xiong, Ruikang Xu, Zhicheng Wang, Peiyao Shi +8 more
similarity 0.57
Abstract

Serial electron microscopy (EM) is essential for large-volume biological imaging and connectomics, yet its throughput remains a major bottleneck, with cubic-millimeter-scale brain imaging requiring months or years. Existing deep learning-based EM super-resolution methods are limited to small upscaling factors or rely on synthetic data, offering modest acceleration and limited practical impact. We introduce ZoomSEM, a deep learning-based super-resolution method to dramatically accelerate SEM imaging. Trained on real low- and high-resolution scanning electron microscopy (SEM) pairs, ZoomSEM enables reliable recovery of 4$\times$, 8$\times$, and up to 16$\times$ higher-resolution images from fast low-resolution scans while preserving fine neuronal structures critical for connectomic analysis, achieving up to 30-fold effective acceleration. Extensive experiments across datasets of diverse biological samples demonstrate robust generalization under realistic low-resolution acquisition. This advance enables high-resolution, large-volume serial EM imaging at unprecedented speed, poised to transform connectomics and related fields.

0.24

Zero-Shot Cross-Material Ptychographic Phase Reconstruction Using Deep Learning

cs.CV ·2026-09-12 ·Wen-Chun Lin, Kuan-Peng Chen, Nan-Yow Chen, Yu-Chee Tseng, Jen-Jee Chen
similarity 0.56
Abstract

Ptychographic phase reconstruction is commonly formulated as an iterative inverse problem, requiring repeated object-probe updates and resulting in substantial computational cost for large-scale 4D-STEM data. We present a direct local-to-global learning framework that reconstructs full-field phase maps from diffraction measurements without iterative refinement during inference. The proposed network predicts local wrapped-phase patches from individual diffraction patterns using a sine-cosine representation, and the predictions are assembled into a full-field reconstruction using calibrated scan positions and Gaussian-weighted stitching. To evaluate generalization beyond the training domain, the model is trained on one material and directly applied to another in a zero-shot setting without target-domain fine-tuning. Experiments on AuPd and MoS$_2$ demonstrate consistent cross-material transfer in both directions, with the proposed method achieving the best full-field MSE, PSNR, and MS-SSIM among the evaluated learning-based methods. Compared with the iterative ePIE approach, the proposed direct local-to-global pipeline reduces end-to-end reconstruction time by approximately 10$\times$, demonstrating its potential for efficient and transferable ptychographic reconstruction.

0.20

Physics-Informed Sequential Reconstruction of Scanning Probe Microscopy Images with Calibrated Uncertainty

eess.IV ·2026-09-09 ·Surya Prakash Reddy, Sergei V. Kalinin
similarity 0.56
Abstract

Scanning probe microscopy (SPM) has become a mainstay of materials science, condensed matter physics, nanotechnology, biology, and semiconductor metrology. An SPM image, however, is acquired sequentially as the probe traverses the surface under closed-loop feedback while thermal drift, feedback dynamics, tip state, mechanical disturbances, and electronic noise evolve during the experiment. Image correction has therefore become an intrinsic part of SPM data analysis. Classical approaches rely on line leveling, filtering, registration, interpolation, and explicit models of tip or scanner distortions, whereas recent work increasingly uses neural networks trained to map corrupted images to corrected ones. Here, we explore a different formulation in which SPM reconstruction is treated as a Bayesian sequential state-estimation problem. The hidden state represents surface height and its low-order evolution along the slow-scan direction; an artifact-dependent quality score continuously modifies the observation likelihood; a forward Kalman pass provides the causal estimate and innovation diagnostics; and a Rauch-Tung-Striebel (RTS) backward pass incorporates information from the complete acquisition. The result is a reconstructed surface, a relative posterior uncertainty map, and line-resolved diagnostic signals. The recursion is computationally lightweight and scales linearly with the number of image pixels, while the physical parameters can in principle be initialized from instrument characterization or from priors learned during previous operation, an extension not exercised here. We organize the method as a multi-axis family of models so that the contributions of state representation, artifact recognition, lateral coupling, and acquisition redundancy can be evaluated independently.

0.29

Computational compressive imaging reconstruction with a simulated-annealing-based Ising solver

cs.CV physics.opticscs.DCmath-ph+1 ·2026-10-14 ·Ze Zheng, Xiaoyan Wu, Hang Xu, Jingzheng Huang, Tailong Xiao +1 more
similarity 0.56
Abstract · 15 pages, 6 figures

Computational compressive imaging, such as single-pixel imaging and lensless imaging, is a promising imaging technique, enabling the reconstruction of objects from under-sampled measurements through compressed sensing algorithms or deep learning methods. However, the demand for electronic computational resources grows rapidly when recovering high-resolution and multi-dimensional images and training neural networks with numerous parameters, which has become a bottleneck for the widespread adoption of this technique. Here, we propose a physics-driven reconstruction framework that formulates imaging inverse problems as Ising models and directly recovers target objects through the self-evolution of non-von Neumann Ising machines toward the ground state of the Hamiltonian. We employ a simulated-annealing-based Ising solver to demonstrate this proof-of-concept by reconstructing objects in both single-pixel imaging and a lensless diffuser camera at sampling rates ranging from 1% to 25%. By further incorporating a foreground-sparsity constraint and a smoothness constraint, the reconstruction quality of our method is comparable to or even better than that of mainstream algorithms. This approach has the potential to substantially reduce the electronic computational burden of inverse reconstruction, paving the way for real-time, low-power computational imaging.

0.22

Spatial-Frequency Learning for Scanning Transmission Electron Microscopy Image Enhancement

cs.CV ·2026-10-27 ·Hesong Li, Ying Fu, Ziqi Wu, Ruiwen Shao, Tao Zhang
top venuedataset similarity 0.55
Abstract · Accepted by IEEE TPAMI

Scanning Transmission Electron Microscopy (STEM) enables the observation of atomic arrangements at sub-angstrom resolution and plays a key role in the discovery and characterization of advanced materials. Raw STEM images are often noisy and blurred due to multiple degradations. Although recent deep learning methods improve STEM images, their performance remains limited under severe degradations. In this work, we propose a spatial-frequency learning framework for STEM image enhancement. Specifically, we design a spatial-frequency fusion network that exploits periodic atomic arrangements in the frequency domain and restores local atomic details in the spatial domain. Spatial- and frequency-domain features are enhanced separately and then fused. We also present a STEM noise calibration method for synthesizing more realistic STEM images. The parameters of scan noise, pointwise noise, and background noise are estimated through statistical analysis and fitting of real STEM images. Using these calibrated parameters, we construct a diverse dataset containing a wider range of atomic arrangements, imaging modes, and degradations. Random masks combine different atomic arrangements to simulate interfaces between multiple materials. Experimental results demonstrate that our method achieves state-of-the-art enhancement performance on synthetic datasets and real images of advanced materials while improving atomic localization accuracy.

0.58

Advanced Brain Tissue Imaging with Data-Consistent Diffusion Priors in Laminographic X-Ray Nanoimaging

cs.CV ·2026-09-09 ·Wenxuan Fang, Abraham L. Levitan, Ana Diaz, Carles Bosch, Adrian Wanner +8 more
similarity 0.55
Abstract

Nanoscale imaging of mammalian brains is critical for connectomics. X-ray laminography enables high-throughput imaging of extended, plate-like biological specimens. However, the tilted acquisition geometry leads to incomplete Fourier-space coverage, giving rise to a missing-cone of information. Conventional reconstruction methods cannot recover unmeasured information within the cone, resulting in artifacts that distort fine brain structures. While resolving these requires modeling 3D structure, direct 3D deep learning approaches are limited by data scarcity and computational cost. Here we introduce LUCID (Laminography with Unified Consistent Diffusion), a framework that combines multi-view diffusion priors with projection-domain data consistency. LUCID integrates complementary 3D structural information while enforcing strict alignment with the laminography forward model. On simulated datasets, LUCID substantially improves spatial fidelity and restores missing Fourier components, outperforming baseline methods. Applied to experimental laminography data, LUCID generalizes robustly despite being trained exclusively on fully sampled tomographic volumes, and effectively recovers unmeasured Fourier information.

0.20