CS Paper Radar

TouchBridge: Tactile-Conditioned Human-to-Robot Transfer for Dexterous Manipulation

Haozhe Zhang, Gu Zhang, Zirui Zou, Yuzheng Chen, Jinlong Wu, Zixuan Hu, Jianke Zhang, Yucheng Hu, Zhecheng Yuan, Huazhe Xu

cs.RO ·submitted 2026-10-29 16:06 UTC · v1

Abstract

Human demonstrations offer an efficient and scalable source of data for dexterous robot manipulation, but differences in sensing and hand morphology complicate the transfer of contact-rich interactions. We present TouchBridge, a hardware--software co-designed framework for human-to-robot data transformation. A wearable human demonstration interface and a corresponding robot interface establish cross-embodiment correspondence in visual and fingertip tactile sensing. We introduce Tac-Retarget, a tactile-conditioned retargeting method that uses measured contact to align fingertip contact patches and preserve their spatial relations within and across hands. Unlike object-aware or simulation-based transfer pipelines, Tac-Retarget requires no object mesh, object-pose estimate, or physics simulation for retargeting, enabling direct and scalable conversion of human demonstrations into robot-domain training data. Combined with visual synthesis and camera-anchored action conversion, TouchBridge produces robot-domain demonstrations for fine-tuning a pretrained vision-language-action (VLA) model. Across four real-world contact-rich tasks, policies fine-tuned solely on TouchBridge-converted human demonstrations achieve a 72.5% average success rate, compared with 77.5% using an equal number of teleoperated robot demonstrations, while human demonstration collection is 7.0x faster. Under the same policy and training setup, Tac-Retarget outperforms DexPilot and UniDex by 25.0 and 42.5 percentage points, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

Unified Visual-Tactile-Action Modeling from Human Demonstrations for Dexterous Manipulation

cs.RO cs.AI ·2026-09-28 ·Wenqiao Li, Qianyou Zhao, Jiawen Hao, Xuezhou Zhu, Tengyu Liu +3 more
datasetcode/data similarity 0.83
Abstract

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

0.46

Kinematic-Tactile Aligned Dexterous Retargeting with Contact Wrench Space Alignment

cs.RO ·2026-10-29 ·Xinyuan He, Ziheng Xu, Yueyuan Chen, Yufan Ye, Yuanshuo Tan +4 more
similarity 0.83
Abstract · 8 pages

Human demonstrations provide a natural and scalable source of data for learning dexterous manipulation policies. However, existing retargeting methods primarily transfer human kinematics, while the tactile information underlying physical interaction is rarely preserved across embodiments. To address this limitation, we present a hierarchical three-stage framework for kinematic-tactile aligned dexterous retargeting. We use object-centric contact wrench space as a physical representation for tactile alignment between human and robot hands. The framework first aligns hand kinematics and contact geometry, and then constructs a human wrench support profile from tactile forces and contact geometry. Robot fingertip force targets are subsequently optimized to cover the human wrench support and converted into joint position corrections, yielding directly replayable robot hand trajectories. We evaluate the framework in simulation and real robot experiments across three pouring conditions. In the real robot experiments, our method achieves a 96.7\% replay success rate and higher wrench transfer fidelity than representative retargeting baselines. The framework enables physically grounded transfer of kinematic and tactile information from human demonstrations to robot hands, providing a path toward scalable learning of contact-rich dexterous manipulation.

0.14

Dex-X: Learning Visual-Tactile Dexterous Manipulation From Human Videos with Simulated Interaction

cs.RO ·2026-09-07 ·Ruoqu Chen, Feixiang Ruan, Liu Cao, Zihao Wang, Botian Xu +7 more
highly cited similarity 0.81
Abstract · Project website: https://dexx-code.github.io/dexx-code/

Human videos are an abundant source of dexterous manipulation behaviors, but they lack tactile information that is crucial for contact-rich interaction. This raises a fundamental question: can robots learn deployable visual-tactile dexterous manipulation policies from human video demonstrations without robot-side data collection? We present DEX-X, a framework for learning visual-tactile dexterous manipulation from human videos through simulation. Our key insight is that simulation can serve as a tactile completion engine. Given monocular human demonstrations, DEX-X reconstructs hand-object interactions in simulation, where physically grounded contact dynamics provide tactile supervision unavailable in the original videos. Leveraging this recovered tactile information, we train visual-tactile dexterous manipulation policies and distill them into deployable policies operating on point-cloud observations and tactile sensing. We demonstrate zero-shot sim-to-real transfer on a dexterous hand-arm platform across diverse grasping and contact-rich tool-use tasks. The teacher policy achieves 65.9% average success across six task categories in simulation, while the distilled visual-tactile policy achieves 93% success on real-world cube picking and 53% on the challenging table-cleaning task. Zero-shot generalization to unseen object geometries is also observed on object-picking tasks. Our results suggest that simulated interaction is a key bridge between human videos and deployable dexterous manipulation policies, providing the missing physical supervision needed for scalable robot skill learning from Internet-scale human video data.

0.50

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.81
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

TACROSS: An Efficient and Low-Cost Scalable Human Touch System Across Heterogeneous Tactile Sensors for Dexterous Robot Learning

cs.RO cs.LG ·2026-10-08 ·Bo Chen, Huanzhang Hu, Junyang Ma, Bo Yue, Fangdi Yu +9 more
code/data similarity 0.81
Abstract

Collecting tactile demonstrations on robots is costly and slow, motivating the use of lower-cost human tactile gloves for scalable data collection. However, human capacitive/piezoresistive gloves and robotic tactile sensors differ fundamentally in transduction principle, sensor layout, spatial resolution, and dynamic response, making alignment of raw sensor channels ill-posed. To address this problem, we present TACROSS, a scalable system for learning from human touch and transferring it to robots that bridges this heterogeneity by aligning tactile streams at the level of contact events rather than raw sensor values. The hardware component of TACROSS integrates a piezoresistive glove with five layers and a cost of USD 10.86 with 285 sensing points. To align contact semantics, we design canonicalizers and residual adapters that map heterogeneous signals into a shared tactile latent with 256 dimensions via a temporal Transformer with attention across fingers. We further introduce a robot-grounded policy learning scheme in which robot demonstrations provide the sole source of ground-truth action supervision, while human demonstrations support tactile representation learning and provide confidence-weighted auxiliary supervision through valid retargeted hand targets. We evaluate our system on four contact-rich manipulation tasks. Compared to conventional teleoperation, our proposed system achieves a 3.5-fold efficiency improvement while reducing demonstration acquisition equipment cost by 95.7%. We will open-source the TACROSS hardware and software system and publicly release a tactile dataset comprising over 150 hours of recordings. Project page: https://tacross-touch-project.github.io/.

0.23

Touch2Robot: Robot Touch in the Human Demonstration Loop

cs.RO cs.AI ·2026-09-21 ·Shengcheng Luo, Xiaoyang Cheng, Hong Ying, Xiaoying Zhou, Jiaming Jiang +4 more
similarity 0.81
Abstract · 12 pages, 13 figures

Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.

0.52

TacOT: Learning Contact-Rich Dexterous Manipulation from Human Demonstrations via Tactile-Guided Optimal Transport

cs.RO ·2026-10-03 ·Xingting Li, Yifan Han, Zijian Lin, Wei Hou, Chuqiao Lyu +2 more
similarity 0.81
Abstract · 9 pages, 8 figures

Learning contact-rich dexterous manipulation from human demonstrations provides a scalable source of interaction data, yet transferring such skills to robots remains challenging due to unreliable human--robot correspondence. Existing human-to-robot transfer methods typically rely on visual appearance or motion similarity, which may associate similar motions with different contact states and force patterns. Tactile dynamics provide interaction-aware cues to distinguish manipulation processes with similar motions but different contact states. We introduce tactile-guided optimal transport (TacOT), a framework for human-to-robot contact-rich manipulation. TacOT leverages action--tactile dynamic time warping to identify human--robot demonstration correspondences with consistent interaction dynamics and uses these correspondences to guide soft optimal transport alignment in a shared policy representation space. This enables human demonstrations to provide contact-rich supervision for robot policy learning without requiring predefined frame-level human--robot pairing. Across four real-world dexterous manipulation tasks, TacOT improves closed-loop success rates over action-guided OT by up to 17 points on in-distribution tasks and 20 points under targeted human-to-robot out-of-distribution transfer. Further analyses show that tactile-guided correspondence selects demonstration pairs with more consistent contact dynamics and produces latent representations that better reflect interaction-state evolution. These results demonstrate that tactile dynamics provide an effective semantic signal for establishing reliable human-to-robot correspondence in contact-rich dexterous manipulation.

0.38

UniDex-ViTac: Learning Unified Visuo-Tactile Dexterous Manipulation Policy from Human Video Data

cs.RO ·2026-09-15 ·Hyesung Lee, Si-Hwan Heo, Sungwook Yang
code/data similarity 0.81
Abstract · 8 pages, 7 figures, 2 tables. Project page: https://unidex-vitac.github.io/

Human videos provide demonstrations of dexterous manipulation but lack robot-executable actions and tactile measurements. We present UniDex-ViTac, a framework that uses human-video-guided simulation to generate robot demonstrations paired with fingertip contact observations for training a deployable visuo-tactile policy. Object-specific residual reinforcement learning specialists adapt annotated human-object interaction references to a robotic arm-hand system. Their successful rollouts pair final robot action targets with robot-side fingertip contact observations. From 50 human demonstrations across ten objects, we collect 10,000 simulated trajectories to train a single Action Chunking with Transformers (ACT) based generalist. The policy combines point clouds, proprioception, and four binary contact signals encoded through fingertip labels and a separate token, without requiring human references or privileged object identity and pose at deployment. The contact-augmented configuration achieves 68.3% macro-average success in simulation, compared with 55.5% for the point-cloud-only baseline. Without real-robot demonstrations or policy fine-tuning, it succeeds in 73/110 physical trials (66.4%) across six seen and five unseen objects, compared with 60/110 (54.5%) for the baseline, an increase of 11.8 percentage points. These results support the feasibility of learning a unified visuo-tactile dexterous manipulation policy from video-guided simulated interactions. Project page: https://unidex-vitac.github.io/

0.33