CS Paper Radar

Don't Just Impute, Detect: Task-Aware Diffusion Pipelines for Edge Anomaly Detection

Jeongsu Park, Taehyeon Yun, Geonwoo Kim, Yuji Lim, Moohong Min

cs.LG ·submitted 2026-10-29 12:23 UTC · v1
publishedcode/dataunusual

Abstract

Industrial Internet of Things (IIoT) edge pipelines routinely lose contiguous blocks of multi-sensor data to network dropouts and hardware faults. The standard remedy is a disjointed "impute-then-detect" pipeline whose imputer is trained only for Mean Squared Error (MSE). Such an imputer fills a missing block with the most probable normal pattern: a partially observed anomaly is smoothed back toward normality, and boundary artifacts on normal data raise false alarms. We call this imputation bias and propose the Task-Aware Diffusion Refiner (TADR), a conditional diffusion refiner trained against the loss landscape of a frozen downstream detector. Because back-propagating through the sampling trajectory is intractable, the task-aware terms act on the one-step clean-window estimate that the noise prediction already yields, so training costs no more than plain diffusion training. Under strict Point-to-Point evaluation over five seeds with paired significance tests, TADR raises F1 by $0.338$ over the unrefined detector on SMD ($p = 0.0015$), and the anomaly enhancement objective alone contributes $0.463$ in ablation. We also characterise when the method helps: the gain tracks the continuous, mutually redundant channels available and the anomaly evidence the outage removes, and it is absent on telemetry datasets dominated by one-hot command channels and on PSM. At ten sampling steps TADR runs in $41.4$ ms per window on a single CPU core, sustaining about $24$ concurrent 1 Hz streams from a $4.03$ MB model. Code and per-seed results are available at https://github.com/int-park422/TADR.

Comment
11 pages, 6 figures. Accepted at the 33rd IEEE International Conference on High Performance Computing, Data, and Analytics (HiPC 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

CTRL-FM: Inference-Time Structural Control for Flow-Based Virtual Sensing under Long-Horizon Node Outages

cs.LG ·2026-10-21 ·Boshra Khalili, Andrew Smyth
similarity 0.56
Abstract

Long-horizon node outages are harder than conventional missing-value imputation because complete sensor trajectories remain unobserved for extended periods, while the usefulness of spatial and temporal dependencies varies across outage locations and operating regimes. Existing graph, diffusion, and flow-based methods typically impose a fixed structural bias, which can oversmooth abrupt changes or propagate errors from unreliable neighbors. We introduce CTRL-FM, an observation-preserving flow-matching framework that treats structural guidance as an outage-conditioned inference-time decision. A missing-only flow-matching backbone learns a conditional velocity field while keeping observed measurements exactly fixed. For each realized outage, CTRL-FM constructs self-supervised proxy outages from surviving measurements and uses their known values to select among uncontrolled, graph-dominant, temporal-dominant, and balanced control policies. The selected policy is locally modulated by graph and temporal reliability estimated exclusively from surviving observations, while boundary-anchored trends provide structural guidance. Control is applied only to missing entries and is rejected when proxy evidence does not sufficiently improve over uncontrolled sampling. Across PeMS08, METR-LA, Air-36, and AQI, CTRL-FM achieves the strongest overall performance under 30% and 60% node outages. Stress tests with up to 75% sensor loss further show graceful degradation and consistent gains over training-time and fixed structural control. These results demonstrate that validating, selecting, and locally adapting structural guidance for each realized outage is more effective than imposing a single global structural prior.

0.23

Optimal Transport for Efficient, Unsupervised Anomaly Detection on Industrial Data

cs.LG ·2026-09-12 ·Abigail Langbridge, Fearghal O'Donncha, James T Rayfield, Bradley Eck
publishedbenchmarkcode/datahighly cited similarity 0.55
Abstract

Effective anomaly detection frameworks are a central pillar of the Industry 4.0 paradigm. In this paper, we introduce an Optimal Transport (OT)-based framework for anomaly detection, designed to detect deviations from normal behaviour in time-series sensor data. The OT-based method requires minimal user input and adapts to real-time data without the need for labelled training data. Our method effectively addresses existing limitations related to data labelling, generalisability, and scalability, demonstrating resilience against short-term fluctuations, noise, and data gaps - common challenges in industrial environments. Additionally, our method provides counterfactual explanations improving the auditability of the approach when deployed in industrial settings. The proposed method learns the mapping between normal and observed operating conditions through a sliding reference window that adapts to the dynamicity of the data. We evaluate our approach on three industrial datasets, from shipping, industrial HVAC systems, and publicly available benchmark data. The method was highly effective in identifying anomalies and reducing false positives, outperforming traditional methods, while maintaining computational efficiency and ease of configuration.

0.69

Online Continual Learning in Edge-Cloud Applications

cs.LG cs.CV ·2026-10-23 ·Charalampos Davalas, Dimitrios Michail, Christos Diou, Iraklis Varlamis, Konstantinos Tserpes
similarity 0.55
Abstract

Deployed machine learning models in real-world IoT and edge/cloud systems face a critical reliability bottleneck: the requirement for online adaptation to non-stationary data streams while operating without access to the full original training dataset. Performance is severely degraded when models encounter Out-of-Distribution (OOD) inputs or suffer from catastrophic forgetting. Addressing these challenges requires adaptation mechanisms capable of learning from evolving data streams while preserving previously acquired knowledge. This paper proposes an edge-cloud methodology for integrating Continual Learning (CL) with Out-of-Distribution (OOD) Detection and Concept Drift Detection in IoT applications. The methodology incorporates ODIN and ECDD as alternative mechanisms for identifying informative samples for annotation and triggering rehearsal-based model updates. Experimental results across automotive, healthcare, and agricultural datasets demonstrate the applicability of the proposed methodology and its potential to support model adaptation while mitigating catastrophic forgetting.

0.24

Process Mining-Enabled Federated Anomaly Detection for the Industrial IoT

cs.LG ·2026-11-13 ·Francesco Vitale, Salvatore Bramante, Francesco Flammini, Hangli Ge
top venue similarity 0.55
Abstract · Accepted to the IEEE Annual Congress on Artificial Intelligence of Things (IEEE AIoT 2026)

While federated anomaly detection enables the integration of local data insights across diverse nodes to reduce false positives, it inherently struggles with non-IID data. In practice, industrial IoT plants often operate under varying conditions and experience diverse environmental phenomena, resulting in significant heterogeneity in the monitored time series. In such settings, standard federated learning approaches fail to perform nuanced aggregation that accounts for these cross-node differences, ultimately leading to increased false positive rates. In this paper, we propose a process mining approach to evaluate the similarity of local node data against a reference provided by a global node. The global node utilizes these similarity metrics to dynamically weight local models during aggregation, producing personalized updates distributed across the network. We evaluate our approach using industrial IoT time-series data collected from manufacturing plants operating under distinct conditions. Experimental results demonstrate that our process mining-enabled federated anomaly detection pipeline achieves superior performance, yielding a 46.52% and 11.99% relative improvement in F1-score compared to isolated local training baselines and standard FedAvg, respectively, alongside a 51.24% relative reduction in false positives over standard federated aggregation.

0.35

FirstDiff: One-Step Diffusion-Based Anomaly Detection for Multivariate Time Series via Initial Noise Prediction

cs.LG cs.AIstat.ML ·2026-08-16 ·Ali Boudaghi, Alireza Nemati, Hadi Zare
benchmark similarity 0.55
Abstract

Diffusion models have recently shown strong potential for multivariate time-series anomaly detection by learning the distribution of normal data through iterative denoising. Existing diffusion-based approaches, however, typically perform anomaly detection after completing the reverse diffusion process, relying primarily on the final reconstructed signal and overlooking informative representations produced during denoising. This design incurs substantial computational cost and limits the use of intermediate diffusion information for anomaly detection. In this paper, we propose FirstDiff, a diffusion-based anomaly detection framework based on the observation that the predicted diffusion noise at the initial reverse-diffusion evaluation already contains sufficient information for accurate anomaly detection. FirstDiff models the statistical distribution of predicted diffusion noise under normal behavior using validation data, enabling anomaly inference from a single denoising-network evaluation rather than completing the reverse diffusion trajectory. To model complex temporal and inter-sensor dependencies, FirstDiff employs a Diffusion Transformer as the denoising backbone. Extensive experiments on five public benchmark datasets demonstrate that FirstDiff achieves state-of-the-art performance while reducing diffusion inference from the full reverse trajectory to a single denoising-network evaluation.

0.04

Seamless Deployment of Machine Learning Inference at the Far Edge: An Empirical AWS IoT Greengrass Architecture for Industrial Predictive Maintenance

cs.DC cs.AI ·2026-10-10 ·Prince Kwabena Appiah Boadu, Jeffery Baafi Kyei, Enoch Kofi Koranteng, Griffth Selorm Klogo
top venuehot direction similarity 0.55
Abstract · Conference paper draft in IEEE format, with code appendices. Already accepted in AiBThings - IEEE 4th International Conference on Artificial…

Industrial IoT sensors produce continuous, high-volume data streams that predictive maintenance needs to analyse in real time. Cloud-centric architectures send all raw telemetry to central servers, which costs latency, bandwidth and resilience. This paper presents a hybrid cloud-edge architecture for manufacturing predictive maintenance built on AWS IoT Core and AWS IoT Greengrass v2, with local machine learning inference at the edge and selective cloud synchronization. We deploy two configurations on real AWS infrastructure and compare them: a cloud-only baseline (Configuration A) and the proposed hybrid edge architecture (Configuration B). We measure end-to-end inference latency, bandwidth consumption and inference accuracy. Configuration B cuts cloud-bound bandwidth by 86.8% (63.6 KB to 7.2 KB per 200-reading window) and decision latency by 256x (23.1 ms cloud round trip to 0.09 ms local inference). At the edge, with no cloud involvement, it keeps an anomaly-class F1 score of 0.84 and 91% recall. The evaluation also instruments system uptime and Stream Manager queuing under cloud disconnection; the quantitative disconnection experiment is left as planned work. Our review of the literature points to four gaps that this work addresses: the lack of empirically validated Greengrass v2 deployments for predictive maintenance, unquantified bandwidth savings from selective edge synchronization, unmeasured resilience under cloud disconnection, and the open MLOps feedback loop at the edge.

0.44

ProCTI: Prototype-Refined Global Conditioning for Diffusion-Based Time Series Imputation

cs.LG cs.AI ·2026-09-29 ·Fariza Rashid, Duc Van Le, Rahat Masood, Gustavo Batista, Aruna Seneviratne +1 more
benchmark similarity 0.54
Abstract

Time series imputation has progressed from statistical and deep learning approaches to diffusion-based models, which have shown strong recent performance. Existing diffusion-based methods typically condition the reverse process using local contextual information from the current or neighbouring windows. Meanwhile, global dataset-level structure often remains implicit, limiting performance when local observations are sparse, noisy, or unrepresentative. To address this issue, we propose ProCTI, a diffusion-imputation framework that augments local conditioning with retrieved global dataset-level priors through learned prototypes. A hybrid conditioning mechanism integrates this global context with local signals during reverse diffusion, enabling more accurate reconstruction under varying missingness scenarios. Experiments across multiple benchmark datasets show that ProCTI outperforms strong baselines overall under random missingness, while remaining competitive under attribute-wise missingness. Furthermore, we use a latent-regime data model to characterise the precise conditions under which prototype-derived global conditioning provably improves imputation. We support this with a general theoretical analysis of local-global conditioning.

0.18

Detecting Defects that Matter: An Application-Driven Benchmark for Anomaly Detection in Manufacturing and Retail Logistics (VAND 4.0 Challenge)

cs.CV ·2026-10-03 ·Lars Heckler-Kram, Dorian Henning, Ashwin Vaidya, Jan-Hendrik Neudeck, Ulla Scheler +4 more
benchmark similarity 0.54
Abstract

Existing Anomaly Detection benchmarks are saturated and often unrealistic. As part of the VAND 4.0 Challenge, we introduce a hidden-test, application-driven benchmark across two deployment-critical domains: industrial manufacturing and retail logistics. In the Industrial Track (MVTec AD 2), the results reveal that unsupervised anomaly segmentation remains challenging: the best regular-setting method achieves only ~57\% pixel-level $SegF_1$, indicating substantial room for improvement. Zero-shot approaches trail by ~15 $SegF_1$ points, confirming that task-specific training on normal data remains essential for precise defect localization. Robustness to distribution shifts remains a key open challenge and DINOv3-backbones clearly dominate this track. In the Retail Track (Kaputt 2), the results reveal that (1) supervised defect detection is approaching saturation for common defect types; (2) the best off-the-shelf VLM approach trails specialized models by ~28 AP, confirming that currently VLMs cannot replace fine-tuned detectors, (3) reference images did not prove helpful for top-performing approaches. Performance collapses on rare defects (spillage ~53 AP, missing units ~27 AP), where the supervised ceiling is bounded by data availability. To drive future progress in this domain, we provide a new low-prevalence retail AD dataset (Kaputt-Rare). Across both tracks, computational efficiency is assessed as a first-class metric combining performance, throughput, memory, and power consumption. We introduce a novel metric for measuring efficiency and reveal that that top-performing methods rely on heavy architectures while efficiency is largely neglected. Overall, we conclude that the community needs (a) more efficiency-aware method development, and (b) true anomaly detection approaches for rare defects and shifting conditions. https://sites.google.com/view/vand4-cvpr2026/challenge

0.31