CS Paper Radar

Let LiDAR Decide Where to Look: Geometry-Measured Token Selection for Efficient Sparse Latent World Models

Zeping Zhang, Zhuoya Zhao, Robert Laganière

cs.CV ·submitted 2026-10-29 20:11 UTC · v1

Abstract

Vision-centric autonomous driving models encode thousands of image tokens per frame, yet most depict sky, buildings, or empty road---content irrelevant to planning. Worse, these tokens dilute the planner's attention: we show that randomly discarding 75% of tokens already outperforms the dense model, because the planner can concentrate on the remaining driving-critical content. Building on this finding, we present Geometry-Aware Token Selection (GATS), which uses LiDAR and radar point projections to select a small fraction of image tokens before the vision backbone runs. Because the selector operates on measured 3D geometry rather than visual features, the backbone encodes only the selected patches, cutting end-to-end FLOPs by up to $18\times$. Each kept token receives a 3D anchor from its LiDAR point and is fed to a self-supervised latent world model that predicts future features and 3D displacements without box annotations. At 25% budget, GATS achieves a 3-sec L2 displacement error of 0.520 m on nuScenes and an EPDMS of 88.9 on NAVSIM---surpassing the dense baseline (0.573 m / 85.9) at $6.6\times$ fewer total FLOPs. At an extreme 10% budget (24 GFLOPs, $18\times$ reduction), it still beats the dense baseline on both nuScenes (0.537 m vs. 0.573 m L2) and NAVSIM (87.9 vs. 85.9 EPDMS). On 739 intent-critical scenarios, GATS covers 95.8% of hazardous vehicles and achieves a 0.09% collision rate---73.5% lower than the dense model (0.34%).

Closest papers

Nearest neighbours by meaning across the whole index.

Planning-Aligned Pretraining of BEV Representations with Sparse Action-Conditioned Targets for End-to-End Autonomous Driving

cs.CV cs.AI ·2026-09-19 ·Jaeha Song, Soonmin Hwang
code/datahot direction similarity 0.72
Abstract

End-to-end driving requires planning-relevant bird's-eye-view (BEV) representations, but existing pretraining approaches often rely on task annotations or dense scene reconstruction. We introduce PAVER, Planning-Aligned BEV Encoder Pretraining. From a single LiDAR sweep, PAVER constructs sparse risk and unknown targets describing occupied and unobserved evidence along rule-based ego motions. A 10K-parameter head predicts these targets from masked BEV features conditioned on the action state, directing supervision toward geometric constraints on candidate motions. Pretraining requires no driving-task annotations or dense reconstruction. Only the BEV encoder is transferred, preserving the downstream architecture and camera-only inference. On nuScenes, PAVER reduces VAD-Tiny's average collision rate from 0.51% to 0.19%, while improving planning L2, motion prediction, detection, and mapping. The selected VAD-Tiny and VAD-Base schedules use about 36% less estimated total training time than scratch training, including pretraining. On Bench2Drive Town05 Long, PAVER improves UniAD-Tiny's closed-loop Driving Score from 48.45 to 58.79. The project page is available at https://archiiive99.github.io/PAVER.

0.33

GhostPoint: Self-Supervised Representation Learning by Hallucinating Occluded LiDAR Structure

cs.CV ·2026-08-14 ·Mohamed Abdelsamad, Bin Yang, Michael Ulrich, Miao Zhang, Yakov Miron +2 more
top venue similarity 0.71
Abstract · Accepted by ECCV2026

3D object detection from LiDAR point clouds is a core problem in autonomous driving. Recent advances in self-supervised learning (SSL) enable scalable pretraining and transfers well to per-point tasks such as semantic and panoptic segmentation, but transfer to 3D detection remains weaker. We analyze recent SSL methods and find that most objectives are defined only on measured LiDAR returns from visible surfaces, leaving occluded and unobserved regions unconstrained. This visible-surface bias can be sufficient for point-wise prediction, but 3D detection requires robustness to missing structure. To address this gap, we propose GhostPoint, an SSL framework that hallucinates latent features in local neighborhoods around discovered instances, generated via a novel instance voxel dilation. In GhostPoint, an encoder processes observed returns, and an additional predictor infers neighborhood representations from observed context. In addition to standard encoder-level supervision, we introduce a predictor-level supervision scheme on sampled voxels from generated neighborhoods. Specifically, observed (visible/masked) voxels match teacher-encoder targets, while unobserved voxels match teacher-predictor hallucinations. This design encourages the learned representation to explicitly model structure beyond observed returns. Extensive evaluations on nuScenes and Waymo demonstrate that our method achieves state-of-the-art performance, consistently improving downstream 3D detection, especially under sparse scans and limited labels.

0.69

AmodalBox: Automated 3D Bounding Box Annotation under Partial Visibility

cs.CV ·2026-11-07 ·In-Jae Lee, Namtae Kim, Robert Exley, Kwonyoung Ryu, Jaesik Park
publishedcode/data similarity 0.70
Abstract · Accepted by CoRL 2026

Recent progress in vision foundation models (VFMs) has made automated open-vocabulary 3D bounding box annotation increasingly feasible by jointly leveraging LiDAR point clouds and images. However, partial observations remain a major challenge in sparse driving scenes, where visible LiDAR points often cover only a small fraction of the object's surface and provide insufficient cues for estimating its full spatial extent. As a result, existing methods often produce mislocalized boxes or leave objects unlabeled. To address this limitation, we propose \textbf{\Ours{}}, an automated annotation framework that leverages image-generated 3D assets as amodal geometric priors for partially observed objects. By establishing correspondences between input images and rendered views of 3D assets, \Ours{} robustly aligns canonical amodal geometry with partially observed world-space LiDAR point clouds. To improve temporal consistency and reduce computational cost, \Ours{} generates a single asset per instance, estimates its metric scale once at a single frame and propagates it across frames for dynamic instances, and aggregates multi-frame observations for static instances. 3D object detectors trained on annotations from \Ours{} improve performance over strong baselines by 14.1 mAP on the nuScenes dataset and by 12.45 AP at IoU 0.5 for the vehicle class on the Waymo Open Dataset (WOD). Our project page is available at: \href{https://oliver0922.github.io/AmodalBox/}{https://oliver0922.github.io/AmodalBox/}

0.37

Extrapolation Matters: Sparse-Only Depth Completion Beyond LiDAR Coverage

cs.CV ·2026-11-05 ·Maximilian Jansen, Gasser Elazab, Praveen Kulkarni
hot direction similarity 0.68
Abstract

Extrapolation beyond LiDAR coverage is an important yet under-evaluated challenge of depth completion. In real camera--LiDAR systems, partial sensor overlap, occlusions, and limited field coverage often leave large image regions weakly observed or completely unobserved by LiDAR. Thus, we investigate depth completion in this beyond-coverage regime using only sparse supervision from raw single-sweep LiDAR, without dense depth labels, LiDAR accumulation, or pseudo-LiDAR generation. Our approach leverages a frozen monocular depth foundation model, lightweight per-frame alignment to sparse LiDAR geometry, and a refinement module that fuses the aligned prior with sparse LiDAR anchors to predict dense metric depth. To regularize learning under raw sparse supervision, we introduce a high-frequency normal-consistency loss defined as the image-space gradient of the per-pixel normal cosine discrepancy. This term penalizes spatial variation in scalar angular error; it does not directly match changes in neighboring normal vectors. We further introduce an evaluation protocol that explicitly separates LiDAR-supported and beyond-coverage regions, revealing extrapolative behavior that conventional depth-completion metrics can obscure. Our method achieves strong depth accuracy beyond LiDAR coverage while remaining competitive in LiDAR-covered regions, providing a practical way to deploy monocular foundation priors in multi-sensor systems.

0.18

ELiCv2: Learned LiDAR Geometry Compression under Real-Time Embedded Constraints

eess.IV ·2026-11-03 ·Soowoong Kim, Junsik Kim, Gun Bang, Jinsoo Choi
similarity 0.68
Abstract

Improving learned LiDAR compression increasingly relies on heavier inference, making it harder to meet the constraints of real-time embedded systems. We present ELiCv2, which removes two sources of redundant computation in progressive coding. Its discrete entropy interface selects a precomputed integer CDF instead of materializing one from a per-voxel distribution, while its occupancy-driven kernel-map builder derives finer-level sparse-convolution kernel-maps directly from the decoded hierarchy, eliminating coordinate-based neighbor search. ELiCv2 reinvests the recovered computation budget in lightweight ego-motion-aware temporal conditioning that gathers local occupancy context from the aligned previous reconstruction. On four LiDAR datasets and an NVIDIA Jetson Thor, ELiCv2 achieves a mean BD-rate reduction of 30.97% over G-PCC with channel width C=32 while sustaining the 20Hz nuScenes capture rate. Increasing the channel width to C=64 improves the mean reduction to 35.22%.

0.26

WOLF: World Model Guided LiDAR Exploration with Predictive Frontiers

cs.RO ·2026-09-20 ·Yuyang Tian, Penghui Yang, Pengyuan Wu, Haoran Yang, Chenhui Li +5 more
similarity 0.68
Abstract

LiDAR-based unmanned aerial vehicle (UAV) exploration builds maps by continually selecting where to observe next. However, decisions based on the measured map provide limited foresight into spatial continuations behind occlusions, leaving potentially informative directions unrecognized. We present WOLF, a world-model-guided framework that predicts future observations to enhance autonomous exploration. In the training stage, a recurrent world model learns observation dynamics from exploration trajectories, with recurrent memory retaining the spatial context needed to interpret partial observations across successive views. Building on this context, the model combines observation history with candidate motions during exploration to predict local occupancy and visibility. To guide further sensing, a predictive frontier generation mechanism then aligns and fuses these predictions using confidence, branch agreement, and observation quality to identify promising regions. The resulting predictive frontiers join measured ones to guide geometric viewpoint selection and trajectory generation, while new scans update subsequent predictions. In simulations, our method reduces mean terminal time by 10.9% relative to EPIC in Garage at comparable coverage and increases mean coverage from 42.12% to 98.35% in Tunnel. Real-world experiments further demonstrate onboard deployment of the learned model for online inference during physical flight.

0.19

RangeNav: Task-Aligned LiDAR Range-Image Pretraining for Robot Navigation

cs.RO cs.LG ·2026-10-21 ·Samuel Foo Enze, Manthan Patel, Fan Yang, Linus Kramer, Pascal Roth +2 more
similarity 0.68
Abstract · 9 pages, 6 figures, 5 tables. Added project website to abstract and updated author affiliation; research content unchanged

Autonomous mobile robots operating in dense crowds and cluttered sites require $360^\circ$ perception to react to surrounding hazards. While panoramic LiDAR offers full-surround coverage, learning representations within reinforcement learning (RL) is sample-inefficient under sparse rewards, and existing 3D pretrained point-cloud encoders are too memory-heavy for massively parallel RL simulation. We present RangeNav, a compact (183k parameters) LiDAR range-image encoder pretrained entirely on synthetic data. RangeNav uses anisotropic convolutions and circular padding to handle the extreme aspect ratio and azimuthal seam of range images. We pretrain the network using a navigation-aligned objective combining range reconstruction, semantic segmentation, and bird's-eye-view (BEV) prediction, then freeze it for policy learning. In simulation, adding semantic and BEV supervision increases success rates over a reconstruction-only baseline by an average of 32.03 and 23.73 percentage points (pp) in procedurally generated training and out-of-distribution realistic test environments, respectively. Zero-shot real-world deployments on a Unitree B2-W quadruped demonstrate robust navigation through dense crowds, low-light settings, and construction zones where limited-field-of-view depth policies struggle. Code and models will be open-sourced. Project website: https://rangenav.github.io/.

0.25

TriO: Tri-Modal Unsupervised Occupancy World Model for Anything Perception

cs.CV cs.AI ·2026-09-25 ·Quinlan Sykora, Sourav Biswas, Christopher Diehl, Andrew Cunningham, Thomas Gilles +1 more
top venue similarity 0.67
Abstract · Published at ECCV 2026, 49 pages, 20 figures

We present TriO, a multi-modal unsupervised world model that predicts 4D occupancy, obstacle segmentation, flow and LiDAR. In contrast to prior work, TriO utilizes three distinct sensor modalities (camera, LiDAR, and RADAR) as both inputs and sources of self-supervision, eliminating the need for additional human annotations. Thanks to its novel supervision, the model is able to segment any occupancy from the drivable surface, overcoming the limitations of existing open-set methods in handling long-tail objects. TriO achieves state-of-the-art results in multiple 3D and 4D tasks, including occupancy, flow, and LiDAR prediction, as well as zero-shot road obstacle segmentation across multiple datasets such as Argoverse 2, and Spotting the Unexpected.

0.40