CS Paper Radar

ARPEGE: Dataset and Methods to Estimate Acoustic and Geometric Parameters of Rooms from Sound

Jean-Daniel Pascal Prieto, Prerak Srivastava, Cédric Foy, Antoine Deleforge

cs.SD eess.AS ·submitted 2026-10-30 10:41 UTC · v1
dataset

Abstract

Can one hear the walls of a room? To foster audio signal processing research around this question we release ARPEGE, a dataset containing hundreds of ambisonic spherical-array room impulse responses recorded in 6 empty rooms, annotated by the relative positions of sources, microphones and all acoustic reflectors. The dataset includes multiple room sizes, surface materials, orientations and distances, as well as recordings of human speakers and handclaps. Two state-of-the-art methods on image source localization and blind room parameter estimation are demonstrated on the data. Initial code for re-simulating the measured room impulse responses is provided, a longer term goal being to digitally twin the dataset.

Journal ref
19th International Workshop on Acoustic Signal Enhancement (IWAENC), Sep 2026, Cremona, Italy

Closest papers

Nearest neighbours by meaning across the whole index.

Ambisonics Encoding of Room Impulse Responses using a Device-Agnostic Diffusion Model

eess.AS cs.SD ·2026-08-14 ·Eloi Moliner, Christoph Hold, Juan Azcarreta Ortiz, Sebastian Prepelita, Ishwarya Ananthabhotla +3 more
similarity 0.65
Abstract · IWAENC 2026

We address the problem of encoding room impulse responses (RIRs) into high-order Ambisonics (HOA) representations from arbitrary and potentially insufficient or incomplete microphone array measurements. This task is fundamentally ill-posed for microphone arrays with limited spatial capture capabilities, such as irregular or sparse arrays, as classical linear methods fail to reconstruct high-order spatial detail. We introduce a diffusion-based generative framework that models the statistical properties of HOA RIRs. This enables device-agnostic encoding from arbitrary microphone arrays, potentially unseen during data measurement. Our approach incorporates a posterior sampling procedure that enforces consistency between the estimated signals and the measurements while plausibly reconstructing spatial information that is unobservable from the limited measurements alone. Experiments on simulated data demonstrate that our method outperforms linear and neural baselines, achieving accurate HOA RIR estimation up to 12th order. A listening test with binaural renderings, including both simulated and measured RIRs, further confirms that the proposed method yields higher perceptual similarity to reference Ambisonics RIRs than all baselines. The flexibility and accuracy of the proposed framework opens new possibilities for scalable acoustics simulations.

0.39

Echo Detection in Spatial Room Impulse Responses Measured with Spherical Microphone Arrays Using the Herglotz Wavefunction

eess.AS ·2026-09-23 ·Pierre Massé, Anthony Gallien, Wolfgang Kreuzer, Markus Noisternig
similarity 0.64
Abstract · 15 pages, 10 figures, 4 tables

Early reflections in spatial room impulse responses (SRIRs) measured using spherical microphone arrays (SMAs) play an important role in spatial audio analysis, rendering, and reverberation modeling. Their accurate localization and characterization can facilitate the analysis, processing, and manipulation of measured reverberation fields. This paper proposes a method for detecting and characterizing early reflections based on the Herglotz wavefunction formalism. The measured sound field is represented as a continuous superposition of incident plane waves, from which a localization function is derived in the spherical harmonic domain. An adaptive radial Gaussian fitting procedure is then used to estimate both the directions of arrival (DoAs) and the number of incident reflections within a single analysis frame. The proposed framework is evaluated using simulated and measured SRIRs and compared with conventional steered response power (SRP) and multiple signal classification (MUSIC) localization methods. The results demonstrate improved localization accuracy and more reliable detection of multiple simultaneous reflections, highlighting the potential of the proposed Herglotz-based formulation for the analysis of early reflections in SMA-measured SRIRs.

0.29

AcousticAgent: A Floorplan-Centric Simulation Platform for Distributed Multi-Room Speech Processing

eess.AS ·2026-10-16 ·Zhiqi Ai, Han Cheng, Shiyi Mu, Yongjin Zhou, Shugong Xu
dataset similarity 0.64
Abstract

Existing acoustic simulation tools either generate room impulse responses (RIRs) efficiently in parameterized rooms or rely on preconstructed three-dimensional scenes, making it difficult to build large numbers of editable residential multi-room environments. We present AcousticAgent, a floorplan-centric acoustic simulation platform that converts structured floorplans into editable, acoustically connected multi-room scenes. AcousticAgent jointly models room geometry and connectivity, furniture, materials, sound sources, and microphone configurations. A scene-oriented Acoustic Materials Database maps semantic elements to acoustic parameters, while a floorplan-aware hybrid geometrical-acoustics solver generates multichannel RIRs and reverberant audio. The platform also supports directional and moving sources, distributed microphones, and VLM-assisted scene construction from floorplan images and text. Using AcousticAgent, we construct FP-RIR, a dataset covering 15,376 residential floorplans with diverse room topologies, propagation conditions, and source--receiver configurations. We validate its acoustic fidelity against real-world measurements and evaluate whole-home source localization, speech enhancement, and far-field speech processing under single-device and distributed microphone settings. The results demonstrate the effectiveness of floorplan-aware modeling for large-scale residential acoustic simulation and the benefits of distributed spatial processing in multi-room environments. AcousticAgent and FP-RIR provide scalable and configurable resources for developing and evaluating residential speech systems.

0.11

Reverberant Speech Conditioning for Material-Aware Acoustic Parameter Mapping

cs.SD ·2026-11-09 ·Yi Wu, Olha Townsend, Qianqian Fang, Magdalena Fuentes, You Zhang
benchmark similarity 0.64
Abstract

Dense maps of room acoustic parameters (T30, EDT, C50, DRR) describe how a room sounds at every position. Scene-wide estimation predicts such maps from a floor plan but requires a reference impulse response, which is hard to obtain. Our system instead receives a floor plan and easily recorded reverberant speech from one talker-microphone pair. We compare four speech-derived conditioning inputs: MFCCs, an embedding from the blind estimator BERP, BERP's scalar reverberation-time estimate, and an impulse response reconstructed by Rec-RIR. Our main benchmark is the MRAS dataset, where material assignments vary at fixed geometry. The reconstructed impulse response performs best among the four inputs, reducing T30 error from 31.5% with the floor plan alone to 19.9%, 83% of the reduction achieved by the reference response. We find that adding speech mainly sets the overall level of the map, with little improvement in predicting how the acoustics vary across the room.

0.18

Acoustic Image Source Interpolation with Optimal Transport Barycenter

eess.AS eess.SP ·2026-09-14 ·Yuyang Liu, Rumeshika Pallewela, Jesper Brunnström, Isabel Haasler, Filip Elvander
similarity 0.63
Abstract · Submitted to ICAASP 2027

Room impulse responses can be estimated via the image source model (ISM) using the image source point cloud (ISPC) of a physical source. However, because the source movement changes the ISPC, estimating the ISPC at a new source position typically requires repeated acoustic measurements. We propose an optimal transport (OT) barycenter framework to interpolate the ISPC of a new source location from ISPCs of known sources. The method jointly estimates image-source associations and the ISPC at the new location. The OT ground cost exploits the property that the image sources undergo the same displacement as their physical sources. This approach is realized for both grid-based and support-free configurations. The support-free method addresses the resulting nonconvex joint estimation problem by alternating between identifying image-source associations across the ISPCs and refining the target image-source locations. This enables the interpolation of ISPCs without repeated measurements, facilitating efficient and flexible room-acoustic modeling.

0.39

Self-Localization of Distributed Microphone Arrays Using One Source and Acoustic Reflections

cs.SD ·2026-10-30 ·Thomas Guffroy, Jean-Daniel Pascal Prieto, Cédric Foy, Antoine Deleforge
similarity 0.63
Abstract

We present a method to estimate the relative position and orientation of two non-coplanar microphone arrays using a room impulse response (RIR) from a single source. The approach exploits early acoustic reflections, retrieved by each array in the form of a 3D image-source point cloud, using a recently-proposed image-source localization technique. The task is then reduced to aligning the two unlabeled point clouds, which is made difficult by their inherent symmetries and by spurious, missing and noisy estimates. To this aim we introduce ARCTIC, a point-cloud registration algorithm that performs a ranked search over congruent triangles anchored on the true source. Simulated and real experiments show that ARCTIC strongly outperforms two baselines, achieving mean angular and radial self-localization errors below 5 and 10 cm across 36 real RIRs measured in 6 different rooms.

0.31

Estimation of Room Impulse Responses from Handclaps

cs.SD cs.AI ·2026-09-24 ·Shih-Yu Lai, Kyung Yun Lee, Nils Meyer-Kahlen, Eloi Moliner, Bing-Yu Chen +1 more
benchmarkdatasethot direction similarity 0.62
Abstract

Handclaps provide an equipment-free excitation for room acoustics, but their unknown and variable source waveform makes room impulse response (RIR) estimation challenging. In this work, we investigate whether RIRs can be estimated directly from handclaps. To this end, we introduce an anechoic handclap dataset containing 2,540 claps from 17 participants, designed to capture variability across natural claps and different hand configurations. We first establish the performance attainable when the excitation clap is known using regularized deconvolution, and show that approximating the unknown excitation by windowing the direct sound from the reverberant recording is insufficient. To estimate the RIR without a known excitation, we propose using the anechoic handclap recordings to train a deep neural network with a supervised regression objective. Evaluated on a controlled synthetic benchmark, the proposed neural regressor significantly outperforms windowing-based baselines across all instrumental metrics. Furthermore, we test the proposed method on handclap recordings measured in real acoustic spaces, showing that the inferred RIR spectra are consistent across different handclap measurements taken in the same room location. These results showcase the feasibility of directly estimating RIRs from natural handclaps without requiring knowledge of the excitation signal.

0.31

Optimal transport of image sources for interpolation of room impulse responses with moving sources

eess.AS eess.SP ·2026-09-15 ·Jesper Brunnström, Filip Elvander, Isabel Haasler
similarity 0.62
Abstract

In geometrical acoustics, room impulse responses (RIRs) can be represented by a set of image sources in free space. For a fixed source position, the image sources allow for computing RIRs at arbitrary receiver positions. However, for a moving physical source, the image sources also move, making interpolation more difficult. In this paper we develop an interpolation method for image source positions of a moving source, given image source positions at the start and end of the trajectory. The method exploits the fact that each image source moves the same distance as the physical source. A statistical model is developed to derive cost functions and an appropriate dummy cost used in the proposed partial optimal transport (POT) approach. Through simulated experiments, POT using the proposed cost functions is shown to be effective compared to the alternatives.

0.22