CS Paper Radar

When the Simulator Fails, Not the Policy: Auditing Contact Artifacts in Simulated Robot Benchmarks

Alex Zhou, Junhao Wu, Xueyang Zhou, Yixiao Huo, Hongcheng Gao, Di Zhu, Zhenghao Zhang, Yongchao Chen

cs.RO ·submitted 2026-10-30 15:13 UTC · v1
benchmarkcode/data

Abstract

Simulation benchmarks score robot policies by success rate, and every failed episode counts against the policy. Many of these failures are the simulator's fault, not the policy's; we find the cause and fix it. Testing a vision language action model and a world action model in simulation, we find that the policy often places the object and the simulator then ejects it, and that the benchmark's own scripted demonstrations fail the same way. We present SimuGuard, an auditing plugin for LIBERO, RoboTwin, RoboCasa and RoboDojo. It leaves the evaluation unchanged. At every physics step, it records the state and flags an object that starts moving at a contact faster than the robot's contact or gravity account for. It replays a recorded episode bit for bit, and it reruns the episode with one simulation parameter changed. With it we trace these episodes on RoboTwin to the collision detection of the physics engine: for geometry one to two centimeters apart, the engine reports a penetration of about two centimeters, and the solver throws the object out at several meters per second. The cause is one constant: the distance algorithm discards triangles below a fixed area threshold, which valid triangles fall below at the centimeter scale. With that constant changed and nothing else, episodes with an artifact fall from 12 in 100 to none, and the success rate on five container tasks rises from 89% to 98%. Success rates in simulation thus count failures that the simulator causes. Benchmarks on PhysX 5.3.1 or earlier should rerun in a repaired engine. Where the engine cannot change, they should report the success rate together with the range it spans when every flagged episode fails or passes: 75.8% to 98.5% around a reported 83.1% for LingBot-VA.

Comment
https://github.com/ALEXander22568/simuguard

Closest papers

Nearest neighbours by meaning across the whole index.

Faster and Better? Benchmark Bugs and Design Limitations Distort the Evaluation of Vision-Language-Action Acceleration

cs.RO ·2026-09-29 ·Qiwei Chen, Kaijun Zhou, Nuohui Shi, Zhiyang Li, Yuxuan Feng +1 more
benchmark similarity 0.71
Abstract · Includes appendix

Simulated manipulation benchmarks are the standard tool for evaluating vision-language-action (VLA) policies and the acceleration methods that reduce their inference latency for on-robot deployment. On these benchmarks, we observe that some training-free acceleration methods, which approximate the baseline policy's computation, achieve higher measured success rates than the baseline itself. Success rates alone cannot establish whether such gains come from better task execution or from evaluation flaws. We therefore investigate two kinds of benchmark flaws behind these gains: bugs, where the implementation does not match the intended task or evaluation protocol, and design limitations, where success criteria and simulation settings do not fully capture how acceleration affects task execution. Starting from tasks with anomalous gains, we localize root causes by plotting object trajectories against checker acceptance regions, and classify the resulting bugs into task consistency, initialization, and reproducibility. Extending this audit to seven benchmarks, including RoboTwin, LIBERO-Plus, and VLABench, we identify 22 bugs of these types and 4 design limitations. For the latter, we revise permissive success checkers, correct unrealistic object masses, and add a motion-aware score that favors smoother actions. Experiments show that bug fixes can reverse method rankings, moving the baseline from last to first on one task. Addressing design limitations can likewise remove anomalous gains: on another task, the baseline moves from 21 percentage points behind an accelerated method to 5 points ahead. Gains attributed to acceleration can therefore be artifacts of the benchmark rather than better task execution. We release our bug fixes and revised benchmark settings to support trustworthy evaluation of VLA acceleration.

0.19

WorldFailBench: Do World Models Understand Policy Failures?

cs.RO cs.AI ·2026-10-24 ·Zheng Zhang, Xiaoyang Tang, Shuaiqi Cheng, Jiakai Huang, Zhongbo Wu +9 more
benchmark similarity 0.71
Abstract

Robot policy evaluation informs deployment decisions and policy improvement, but physical testing and simulator preparation require substantial effort. World models offer a complementary route through closed-loop interaction in generated environments. Recent benchmarks have demonstrated their potential as policy evaluators through outcome-based evaluation (i.e., assessing task success or failure). However, such evaluation does not establish whether world models faithfully simulate how policies fail. Misrepresenting failures can lead to incorrect diagnoses of policy weaknesses and make policies appear ready for deployment even when small scene changes cause them to fail. We therefore ask: do world models faithfully simulate how and at which stages policies fail, and under what conditions they transition from success to failure? To answer this question, we introduce WorldFailBench with three evaluation tasks. Failure reason tests whether models reproduce the observable errors policies make. Failure stage assesses whether failures concentrate at the same stages of full-task execution. Failure boundary examines whether models reproduce the conditions under which policies transition from success to failure under controlled scene changes in simulation. The benchmark covers manipulation tasks in the LIBERO and RoboTwin simulation environments and real-world manipulation tasks performed by the G1 humanoid robot. Experiments across seven world models reveal substantial gaps in their understanding of policy failures, providing guidance for developing more reliable world models for policy evaluation.

0.08

RoboRecover: Benchmarking Robot Policy Recovery under Execution Deviations

cs.RO ·2026-09-24 ·Yang Li, Chen Zhao, Zhuoran Wang, Jiankang Wang, Chao Shao +3 more
benchmark similarity 0.69
Abstract

Robot-policy benchmarks increasingly cover diverse tasks and preset out-of-distribution conditions, but typically evaluate complete trajectories from predefined initial states. These evaluations often focus on the initialized scene and the final outcome, while paying less attention to the dynamic interaction process. During closed-loop execution, actions and contacts can alter object relations and task progress, producing off-nominal intermediate states that need recovery. Recovery requires a policy to infer how task progress has changed, correct the relevant relations, and continue the original goal. We introduce RoboRecover, a benchmark for robot policy recovery under execution deviations. RoboRecover selects deviation states from trajectories, reconstructs them by replaying action prefixes, and evaluates policies on the original task. RoboRecover contains 2,000 scenarios across RoboTwin and LIBERO, with 1,000 scenarios and a fixed 800/200 train/test split on each platform. Results show that initial-state performance does not determine recovery performance and policies exhibit different recovery strengths across scenarios. Using its training split, RoboRecover further supports study on recovery interventions. RoboRecover establishes recovery from execution-induced intermediate states as a distinct dimension of robot policy evaluation.

0.41

LIBERO-MAX: Do Robot Policies Adapt When the World Changes?

cs.RO cs.AI ·2026-09-29 ·Yunbei Zhang, Zijian Jin, Yuanzhe Liu, Janet Wang, Xilun Zhang +12 more
benchmarkcode/datahighly cited similarity 0.68
Abstract · 42 pages, 15 figures. Project page: https://liberomax.github.io

Robots must often continue a task after a target moves, the viewpoint shifts, or an obstacle appears, even though their earlier observations and committed actions reflect the previous scene. Many simulation robustness benchmarks fix external conditions at reset, leaving this temporal challenge underexamined. We introduce LIBERO-MAX, a benchmark of 8,000 paired cases spanning eight types of changes to geometry, observations, appearance, clutter, and paths. Each pair compares task execution with and without a mid-task event, holding the task, initial state, policy seed, and pre-event action sequence fixed. This controlled comparison distinguishes event-associated regressions from failures already present without the change. Across fourteen current VLA, hybrid, and world-action policies, events reduce success by 11.0-25.7 percentage points. Event profiles reveal shared vulnerabilities to geometry and observation changes, while policy-family rankings interleave. Camera controls show that robustness reflects both competence under the changed conditions and the trajectory from which they are encountered; varying query cadence does not eliminate the gap. Together, the paired protocol and temporal diagnostics establish LIBERO-MAX as a reproducible testbed for diagnosing failures under mid-execution changes and measuring progress toward robot policies that remain effective as the world changes.

0.59

World Models Dream of Success: Diagnosing and Repairing Failure Insensitivity in Robot World Models

cs.RO ·2026-10-06 ·Jiuyi Xu, Xiao Hu, Meida Chen, Peng Gao, Yang Ye +1 more
code/data similarity 0.68
Abstract · 23 pages, 4 figures, 12 tables

Robot world models support policy evaluation, planning, and synthetic data generation, but these applications require predictions that distinguish successful actions from failures. Across four released checkpoints from two architecture families, we observe weak sensitivity to action changes and success-like predictions on verified failures. Although recent work incorporates failures into model training, which data can repair released checkpoints without changing their architecture or training objective still remains underexplored. To this end, we introduce CureWM, which constructs alternative actions from successful demonstrations across a severity grid, verifies their outcomes through execution in simulation or on hardware, and fine-tunes released models on the resulting failures and surviving successes alongside nominal demonstrations. This construction provides controlled action contrasts from shared starting contexts. On 484 held-out LIBERO failure counterfactuals, optimism falls from 80\% after fine-tuning on the official data to 30--43\% across four independently fine-tuned CureWM models (38\% mean). In two separate evaluations on a physical robot arm, failure predictions scored as success-like by a latent-distance diagnostic decrease from 90\% after fine-tuning on successful demonstrations alone to 33\% with CureWM. With failure counts per task, successful replay data, and training budget matched, counterfactual failures yield a success--failure value gap of 0.124, compared with 0.014 for freshly collected on-policy failures. These findings support execution-verified counterfactual replay for post-hoc repair and show why reduced optimism must be evaluated alongside success--failure discrimination. Code is available at https://github.com/jiuyixu25/CureWM.

0.57

RoboBugBench: Benchmarking Automated Repair of Real Robot Software Under an Audited Behavioral Oracle

cs.RO ·2026-10-12 ·Alexey Tuzikov
publishedbenchmark similarity 0.68
Abstract · 14 pages: 9 main + references + two appendices. 1 figure, 4 tables. Accepted non-archival workshop paper at the Verify-Agents workshop ('Who…

Language agents increasingly modify robot software, but whether they can repair it is unmeasured, because the domain supplies no oracle to inherit: a robot bug manifests as behavior, and robot repositories ship almost no tests that capture it. We present RoboBugBench, a benchmark of 33 real, execution-validated defects in a pinned ROS 2 navigation stack, in which a candidate patch is graded by compiling it and driving the robot through a physics simulation rather than by running a unit test. Three frontier models, each given 1 attempt per instance, repair 24.2%-36.4%, with no pairwise difference significant; difficulty tracks the oracle rather than the domain, at 66.7% on instances graded by process survival against 22.2% on those graded by what the robot did (instance-level p = 0.0027). Because the oracle is constructed rather than inherited we audit it adversarially, and report the decomposition that audit yields: counterfeit patches which suppress a failure without repairing the defect are accepted by the shipped rule 11/11, while a distributional rule over the same data rejects 4 at no cost in false rejects. The residual is an observability bound (what the observation channel discards, no predicate over it can recover), so discrimination must be bought with instrumentation rather than stricter criteria, and our repair rates are bounds: inflated by what the oracle cannot distinguish, deflated by unanimity's rejection of correct fixes under run-to-run noise. We release the corpus, criterion batteries, counterfeit suite and cached telemetry.

0.37

R2S-Eval: Robot Evaluation with Real-to-Sim Calibration via Vision-Language Models

cs.RO ·2026-09-03 ·Yidi Wang, Feixiang Ruan, Ruoqu Chen, Jie Yin, Yang Yu +2 more
code/data similarity 0.67
Abstract

Evaluating robot manipulation policies is becoming increasingly important as generalist models, particularly vision-language-action (VLA) models, are deployed on physical robots. However, conventional real-world evaluation remains labor-intensive, unstable, and insufficiently informative. It requires repeated hardware trials, manual scene resets, and continuous operator monitoring, may produce different policy rankings across repeated evaluations, and primarily relies on success-rate metrics that provide limited information about execution quality. In contrast, humans assess robot performance by observing and comparing complete behaviors rather than relying solely on binary success outcomes. To this end, we propose R2S-Eval, an evaluation pipeline that combines real-to-sim calibration with vision-language model (VLM) preference evaluation. The real-to-sim component efficiently generates rollout videos in a simulator calibrated to the real-world evaluation setting, thereby reducing the need for repeated hardware trials. The VLM evaluator assesses the execution quality of rollout videos and produces pairwise preferences, which are subsequently aggregated into policy rankings. We further introduce a protocol to assess whether the proposed evaluation pipeline yields validated policy conclusions while mitigating the key challenges of conventional real-world evaluation. Experiments in both simulation and real-world settings demonstrate that R2S-Eval produces reliable and stable policy conclusions, achieves agreement with human preferences, substantially reduces repeated hardware-operation effort, and reveals behavior-quality differences that are not captured by binary success labels. In general, R2S-Eval advances robot evaluation from manual success counting toward automated, statistically stable, and quality-aware evaluation of robot behavior. Project page: https://r2s-eval.github.io.

0.50

SPECOLA: A Tool for Specification Driven Robot Evaluation

cs.RO cs.FL ·2026-10-26 ·Immanuel Ampomah Mensah, Hadas Kress-Gazit
code/data similarity 0.67
Abstract

Simulation benchmarks are a useful way to measure progress in robotics; typically they provide success rate as the dominant measure of performance. However, success rate reports only whether a rollout completed the task, hiding by what margin it succeeded, how sensitive the success is to goal parameter changes, requirements it may have violated, and whether success persisted. Signal Temporal Logic (STL) provides a formal language for capturing specifications; it can be used to define requirements, and measure how close a robot behavior is to satisfying or violating them. Using STL monitors in a simulator, however, requires exposing simulator state and mapping it to specification-relevant signals. We present Specola, a tool for evaluating robot behaviors in simulation with respect to STL specifications. Specola provides an interface for writing specifications over simulator signals, and creates and manages the relevant monitors while a policy executes. We provide a Python API and command-line interface for integrating monitoring into existing policy execution loops. We provide an adapter interface for connecting new simulators, and provide adapters for nine simulation environments and benchmarks, including LIBERO, RoboCasa, Isaac Lab, and RoboDojo. We provide case studies that illustrate the nuanced evaluation that Specola enables. Code and adapters are available at https://github.com/specola-eval/specola.

0.25