CS Paper Radar

Learning Clean Generative Processes from Noisy Measurements

Fabian Kruse, Lorenzo Baldassari, Ivan Dokmanić

cs.CV cs.AIcs.LG ·submitted 2026-10-30 17:01 UTC · v1

Abstract

We study how to learn a generative model of clean images using only noisy observations. Diffusion processes and their generalizations to non-Gaussian noise require posterior predictions at every noise level. We first show that it is possible to learn these predictions from independent noisy views using Noise2Noise regression, but only at or above the noise level of the training data. To learn the predictions below that level, needed to generate clean images, we impose consistency: a prediction should equal its expectation after continuing the sampling process. We derive conditions under which consistency uniquely determines the continuation to the clean image distribution and verify them for Poisson, binomial, Gamma, and negative-binomial measurements. Experiments on CIFAR-10, photon-counting microscopy, and synthetic aperture radar show that the required posterior predictions can be learned from noisy views alone and that the consistency relation repairs the continuation beyond the noise level of the data, which severely deteriorates without consistency.

Closest papers

Nearest neighbours by meaning across the whole index.

Correction Training for Diffusion Models

cs.AI ·2026-10-09 ·Donghoon Ahn, Runqian Wang, Alexei A. Efros, Taesung Park, Yash Belhe
code/datacommunity pick similarity 0.65
Abstract · Project page: https://sunovivid.github.io/correction-training/ Code: https://github.com/sunovivid/correction-training

Iterative sampling in diffusion models can lead to error accumulation due to exposure bias. The denoiser is trained on real images interpolated with noise, but at inference its inputs are constructed from its own imperfect predictions from the earlier steps, something it has never seen at training time. This might be one reason diffusion models often struggle without additional help, such as CFG. We introduce a correction step for diffusion models which attempts to reduce this training-inference gap. The corrector takes the base model's prediction as input and is trained against the same ground-truth target. This makes correction an explicit learning task, with training inputs provided by the base model. During sampling, at each denoising step, we iteratively refine the denoiser's clean-sample prediction. This allows us to correct predictions at intermediate denoising steps, preventing early artifacts from persisting into the final sample. Although the corrector is trained only on predictions from the base denoiser, it can be applied repeatedly to its own outputs at inference for better results. This simple framework leads to substantial improvement in sample quality while largely preserving diversity. We evaluate our method across DiT, SiT, and JiT. Our method substantially improves upon previously reported FID scores for unguided generation and, notably, unconditional generation, where producing high-quality samples without guidance has been particularly challenging. Our method achieves performance competitive with classifier-free guidance (CFG), and combining correction with CFG further improves diversity and reduces oversaturation typical of CFG. Finally, we show that the additional inference cost of correction can be amortized by distilling the refined predictions back into the base diffusion model, retaining the quality gains without additional inference-time overhead.

0.33

How Do DiTs Denoise? An Aggregator-Predictor View of Attention and MLPs

cs.CV stat.ML ·2026-10-21 ·Gyeonghun Kang, William Xingxu Chen, Xiang Cheng
similarity 0.63
Abstract

How do diffusion transformers (DiTs) represent image content and learn rules for reusing it to generalize? We develop an aggregator--predictor view of DiTs as input-adaptive local denoisers, in which context aggregation and patch prediction provide functional roles for interpreting attention and MLPs. We first establish that, for Gaussian Markov random field (GMRF) priors, the global Bayes denoiser can be approximated using only a subset of context patches, with error decaying exponentially in context radius. We further show that patchwise linear denoisers, often invoked to explain diffusion generalization, recover the empirical local denoiser with sufficiently informative aggregation. Within this view, AdaLN-modulated attention naturally parameterizes an input- and noise-dependent aggregator, while the MLP admits a learned key--value representation for tokenwise patch prediction. Our experiments support this view. DiTs trained on real images exhibit noise-dependent denoising contexts resembling those in the analytic GMRF setting, while attention mass exhibits a qualitatively corresponding broadening pattern. In a controlled CelebA64 study, shared-memory patch predictors used in place of DiT MLPs achieve competitive denoising and generative performance. Finally, cross-dataset component transplantation reveals compatibility patterns consistent with the proposed roles of QK in spatial weighting, VO in feature transport, and MLPs in patch prediction. Together, these results provide a component-level account of DiT denoising and motivate architecture-specific fine-tuning and controlled intervention.

0.14

sRGB Real Noise Modeling via Noise-Aware Sampling with Normalizing Flows

cs.CV ·2026-08-29 ·Dongjin Kim, Donggoo Jung, Sungyong Baik, Tae Hyun Kim
publishedbenchmarkhighly cited similarity 0.63
Abstract · ICLR 2024

Noise poses a widespread challenge in signal processing, particularly when it comes to denoising images. Although convolutional neural networks (CNNs) have exhibited remarkable success in this field, they are predicated upon the belief that noise follows established distributions, which restricts their practicality when dealing with real-world noise. To overcome this limitation, several efforts have been taken to collect noisy image datasets from the real world. Generative methods, employing techniques such as generative adversarial networks (GANs) and normalizing flows (NFs), have emerged as a solution for generating realistic noisy images. Recent works model noise using camera metadata, however requiring metadata even for sampling phase. In contrast, in this work, we aim to estimate the underlying camera settings, enabling us to improve noise modeling and generate diverse noise distributions. To this end, we introduce a new NF framework that allows us to both classify noise based on camera settings and generate various noisy images. Through experimental results, our model demonstrates exceptional noise quality and leads in denoising performance on benchmark datasets.

0.54

PEEL-DDPM: Physics-Enabled Evidential Learning for the Denoising Diffusion Probabilistic Model

cs.CV ·2026-09-23 ·Ge Wang
hot direction similarity 0.63
Abstract · 13 pages, 5 figures, 2 tables

Normal-inverse-gamma (NIG) regression is not identifiable from its marginal Student-t likelihood: three combinations of four NIG parameters are determined, leaving one degree of freedom. We introduce PEEL-DDPM, a physics-enabled evidential learning framework for denoising diffusion probabilistic models. A measurement-conditioned DDPM is first trained with epsilon-MSE and then frozen. Its complete reverse trajectory produces a reconstruction, whose residual from the known training object is modeled by a final-image evidential network. The network learns only the identifiable Student-t coordinates, while repeated scanner-noise realizations and repeated diffusion trajectories provide a nested Monte Carlo estimate of final-image aleatoric variance, separated into scanner-induced and sampler-induced components. This measured variance resolves the remaining NIG ambiguity and yields a decomposition of predictive uncertainty into measurement, diffusion, and epistemic terms. The method uses sequential training without a cross-loss weighting coefficient. In a feasibility study on eight held-out objects, empirical central-interval coverages were 49.3%, 80.3%, 90.1%, and 95.6% for nominal 50%, 80%, 90%, and 95% intervals. The mean squared residual was 0.967 times the mean predicted variance, and a single-image aleatoric head achieved pooled Spearman correlation 0.785 against an independent nested reference. Across five dose levels, scanner-induced variance showed a log-log dose slope of -1.15, whereas sampler-induced variance remained nearly dose independent with slope -0.01. These results support PEEL-DDPM as a practical route to identifiable and physically interpretable uncertainty quantification in diffusion-based image reconstruction.

0.27

Pixel-Space Diffusion via Observation Operators

cs.CV ·2026-08-22 ·Shaojie Guo, Lichen Ma, Haoyang Tong, Yu He, Zipeng Guo +6 more
similarity 0.62
Abstract

Pixel-space diffusion models directly model image distributions but remain difficult to optimize. Recent methods alleviate this challenge through target reparameterization, while still relying on a fixed clean-image target throughout denoising. Through empirical analysis, we identify a scale-time mismatch: image structures become predictable from coarse to fine as noise decreases, whereas existing models are forced to predict the full image even under high noise, resulting in low-SNR gradients that hinder optimization. To resolve this mismatch, we propose Observation Operator Diffusion, a unified framework that aligns both the supervision trajectory and feature refinement with the intrinsic recovery order of image structures. Specifically, we replace fixed full-image supervision along the standard flow path with a time-indexed observation trajectory that evolves from coarse structures to the full image during denoising. This trajectory is instantiated with a family of Gaussian-Lanczos operators at varying observation scales, yielding a path-consistent training objective. We further introduce GL-CoDA, a decoder that injects scale-specific Gaussian-Lanczos observations across decoding stages for coarse-to-fine feature refinement. Extensive experiments show that the proposed approach converges substantially faster while consistently improving generation quality, achieving an FID of 1.52 on ImageNet-256.

0.29

Training Calibrated Conditional Generative Models with a Sample-Only Coverage Loss

cs.LG stat.MEstat.ML ·2026-11-11 ·Benjamin Remy, Raphael Rossellini, Chihway Chang, Rebecca Willett
theory similarity 0.62
Abstract · 32 pages, 7 figures

Conditional generative models have become the tool of choice for sampling posteriors in scientific inverse problems, where we seek to sample images or signals conditioned on a set of indirect and noisy measurements. Yet they are often overconfident, which is a critical failure in scientific applications where accurate uncertainty quantification is essential. Existing regularizers fall short in complementary ways: differentiable coverage objectives require the model's density and do not identify the posterior, while strictly proper scoring rules such as the energy score need only samples but do not directly enforce coverage. We close this gap by introducing a differentiable loss function based on the expected coverage probability, estimated from samples alone. It applies to any conditional generative model, with no need for tractable densities or architectural changes. We prove that it is a strict divergence, vanishing if and only if the model equals the true posterior. On simulation-based inference benchmarks, it matches a density-based coverage loss without evaluating the density. On high-dimensional imaging inverse problems, it yields better-calibrated posteriors than scoring-rule regularizers, with little change in the reconstruction quality of point estimates.

0.22

Physics-Driven Independent Pair Generation for Iterative Self-Supervised Low-Dose CT Denoising

cs.CV ·2026-09-01 ·Xianlei Han, Shaoyu Wang, Jiancheng Fang, Weiwen Wu, Qiegen Liu
similarity 0.61
Abstract · 10 pages, 11 figures, 3 tables. Includes a 1-page appendix. Submitted to IEEE Transactions on Circuits and Systems for Video Technology

Low-dose computed tomography (LDCT) measurements contain mixed Poisson-Gaussian noise. However, most self-supervised methods rely on generic image statistics and do not explicitly model this noise, which may limit their ability to effectively suppress realistic LDCT noise. To address this issue, we propose a physics-driven framework with cross-domain iteration for self-supervised LDCT denoising. The proposed framework proceeds in three main steps. First, a learned sinogram prior and the LDCT noise model guide posterior inference of photon counts, enabling separation of the Poisson and Gaussian components. Second, the separated Poisson and Gaussian components are respectively processed by binomial thinning and Gaussian data thinning to construct two branches, and residual scaling matches each branch's noise level to that of the observation, yielding a training pair with approximately independent noise realizations from one low-dose measurement. Finally, the pair is used to train an image-domain network whose forward-projected outputs update the prior. Through cross-domain iteration, the prior and the training pair are progressively refined while maintaining consistency with CT acquisition physics. Experiments on simulated data from AAPM, LIDC-IDRI, and LoDoPaB-CT and on real LDCT data show consistent gains over the evaluated self-supervised baselines across dose levels, with performance comparable to the evaluated supervised baseline.

0.25

Parametric Gaussian Noise Mixer (PGNM): Unified Synthesis of Camera Noise and Film Grain

cs.CV ·2026-10-29 ·Mingyang Song, Martín Rodríguez Muñoz
code/data similarity 0.61
Abstract · Technical report, not submitted to any conference. 49 pages (9-page main paper, 40-page supplementary material), 29 figures, 33 tables. Code…

Noise synthesis is commonly approached through physical models of image formation or neural networks trained to generate noisy images. We explore a middle ground: an explicit statistical model fitted directly from paired clean and noisy images. A normalized convolution correlates a Gaussian field across pixels and color channels, and a lookup maps each Gaussian value to a residual given the clean intensity. Because the field stays standard Gaussian, the two components are fitted separately, without reproducing the physical process or training a neural generator. With one formulation for camera noise from SIDD and simulated film grain from Newson, the model has the lowest average distribution and correlation errors on SIDD among the evaluated methods and remains competitive on film grain. A denoiser trained on its noise comes closest to one trained on real noise, and a 1080p frame renders in 10 ms on GPU.

0.44