CS Paper Radar

Spectral and Conformal: Neural Network Methods for Calibrated Trajectory Prediction and Control-Point Intervals

Jasmine Ratchford, Raffaele Romagnoli

eess.SY cs.AIcs.LGcs.RO ·submitted 2026-10-30 18:12 UTC · v1
top venue

Abstract

Autonomous systems that navigate their environment need methods to quickly assess the feasibility and safety of desired trajectories. Traditional solutions that rely on numerical integration can be computationally heavy, while fast data-driven surrogates lack the formal guarantees that numerical approaches provide. This work demonstrates a framework that uses (1) a neural network with a spectral backbone to learn trajectories and quantile bands with built-in constraints (initial conditions and stability); (2) a modified conformal quantile regression to provide calibrated, joint trajectory-level coverage; and (3) interval arithmetic to extend noise-free coverage guarantees to control points. After refactoring the network for inference, the trajectory inference time for a quadrotor under a closed-loop linear quadratic regulator is 3.45~ms on a Raspberry Pi Zero 2 W. The total pipeline time, including trajectory inference time, is 9.81~ms, or approximately 100~Hz, consistent with typical control rates.

Comment
26 pages, 10 figures, 7 tables. Published in Transactions on Machine Learning Research
Journal ref
J. Ratchford and R. Romagnoli, Spectral and conformal: Neural network methods for calibrated trajectory prediction and control-point intervals, Transactions on Machine Learning Research, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Planning to Learn: Real-Time Robust Adaptive Control on the GPU with Guaranteed Future Learning

cs.RO cs.LGeess.SYmath.OC ·2026-10-14 ·Anutam Srinivasan, Siddhant Panse, Glen Chou
similarity 0.57
Abstract

Robust adaptive control is vital for keeping robots safe while actively reducing uncertainty in unfamiliar settings. However, traditional methods are often conservative since they fail to account for guaranteed future parameter learning during planning and struggle to scale to high-dimensional systems. In this work, we present A-SLS, a learning-aware robust adaptive model predictive control (RAMPC) framework based on system-level synthesis. A-SLS forecasts future parameter uncertainty and preserves correlations between process disturbances, parameter error, and estimate updates to construct tight, guaranteed reachable sets that account for future information gain. We also develop a GPU-accelerated A-SLS solver to enable real-time performance. Across nonlinear robotic systems, A-SLS reduces reachable-tube conservativeness, maintains real-time performance, and scales to whole-body control for a quadruped with 61 states, 8 uncertain parameters, and 12 control inputs. We further demonstrate the approach on hardware, where a physical Crazyflie drone learns an uncertain dynamics parameter online to stabilize on the fly.

0.26

Learning to evolve by matching velocities

cs.LG cs.AImath.NA ·2026-10-30 ·Nicola Farenga, Andrea Manzoni
similarity 0.56
Abstract · 76 pages

Learning the continuous-time evolution of nonlinear dynamical systems relies on trajectory-based objectives, which require simulating the learned dynamics during training and backpropagating through the numerical scheme, at a cost that grows with the rollout horizon. We show that trajectory-based objectives degenerate as the rollout horizon increases, hindering gradient-based optimization, and that the numerical scheme biases the learned dynamics by constraining the spectrum of the learned Jacobian to its absolute stability region. To overcome these limitations, we introduce Velocity Matching (VM), a simulation-free objective that relies on piecewise-linear interpolation and stochastic collocation, and approximates the velocity population risk to second order in the sampling step. We develop a theoretical framework for velocity-based learning, introducing stability estimates that control trajectory errors in terms of velocity errors, which enable us to establish universal and continuous-time approximation results when the learned velocity field is parameterized by deep neural networks. Building on a bias-variance decomposition of the VM objective, we show that its higher-order approximation of the velocity population risk yields a consistent minimizer; that it relates to the residual of an A-stable continuous-stage Runge-Kutta scheme, thus connecting VM to implicit integration without requiring any implicit solve; and that it implicitly matches the action of the learned Jacobian to that of the true one along the observed trajectories, without requiring access to the underlying velocity field or its Jacobian. Numerical experiments on nonlinear ordinary differential equations and semi-discretized time-dependent partial differential equations show that VM improves accuracy over trajectory-based objectives, while avoiding both the cost of simulation and the instabilities of long rollouts.

0.30

A Neural Network Approach towards Real-Time Knot Point Density Estimates for the Nonlinear Quadrotor

eess.SY cs.LG ·2026-10-30 ·Jasmine Ratchford, Raffaele Romagnoli, Mark H. Klein
similarity 0.56
Abstract · 8 pages, 5 figures. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after wh…

Spline representations provide a compact way to approximate continuous trajectories using a finite number of parameters. When approximating trajectories generated by dynamical systems, the efficiency of a spline representation depends strongly on the placement of knot points. Uniform knot distributions often lead to inefficient representations, requiring either unnecessary control points or producing poor approximations in regions where the trajectory varies rapidly. In this work we propose a learning-based method for adaptive knot placement in B-spline approximations of trajectories generated by ordinary differential equations. A neural network learns a mapping from the initial condition of the system to quantities that characterize the local variation of the resulting trajectory. These estimates are used to construct nonuniform knot distributions that approximately equidistribute a local error indicator, reducing the number of control points needed to meet a prescribed accuracy.

0.58

Learning Waypoints and Passage Events for Decentralized Multi-Quadrotor Trajectory Planning

cs.RO eess.SY ·2026-10-18 ·Yunhan Shi, Jia Deng, Zehao Jia, Lin Cheng, Shengping Gong
similarity 0.56
Abstract · 9 pages, 7 figures, 3 tables

Multi-quadrotor passage planning requires coordinated spatial routes and passage times under vehicle dynamics and actuation constraints. Optimizing these decisions jointly couples temporal allocation, nonlinear motion, and inter-vehicle interactions, creating a computational challenge for local trajectory generation. We propose a learning-optimization framework that predicts spatial waypoints and ordered passage events for independently solved quadrotor planners. A common physical time grid aligns the vehicles, with intermediate events fixed by the networks and terminal progress optimized locally to permit different completion metrics. Differentiable sequential convex programming incorporates rigid-body dynamics and rotor-thrust bounds, allowing collision and completion gradients to train both networks through the generated trajectories. In a two-quadrotor evaluation across 24 layouts, the adapted policy passes physical feasibility and sampled separation checks in all five held-out layouts. Their mean completion metric decreases by 1.52% relative to the inherited policy. The median forward time is 21.01 ms on the held-out exchange layout with matching numerical trajectory references. These results demonstrate that learned spatial and event parameters can coordinate independent rigid-body planners while preserving local vehicle constraints in the evaluated scenarios.

0.13

Safety-Critical Control under Uncertainty via Adaptive Conformal Quantile Prediction Intervals

cs.RO ·2026-09-20 ·Hao Zhou, Yanze Zhang, Yiwei Lyu, Wenhao Luo
published similarity 0.56
Abstract · 8 pages, accepted to CDC 2026

Safety-critical control under uncertainty requires uncertainty representations that are both statistically valid (for certifiable performance) and compatible with enforceable safety constraints. However, existing methods often assume particular distributions of uncertainty for provable safety guarantees or establish symmetric and input-agnostic prediction intervals for robust safety, which can lead to misaligned or overly conservative safety constraints in control synthesis. In this paper, we introduce a novel safe control framework with adaptive uncertainty quantification that constructs calibrated and state-dependent prediction intervals to enable high-probability safety guarantees, while improving constrained control performance. The framework leverages adaptive conformal prediction (ACP) and extends it with conformal quantile regression (CQR) to capture distribution-free, asymmetric uncertainty intervals with certifiable probabilistic coverage, and integrates the resulting uncertainty sets into a probabilistic control barrier function formulation to enforce robust safety with reduced conservativeness. This yields uncertainty-aware safe control constraints that can be incorporated within a model predictive control(MPC) framework to provide provably safe behaviors with high probability. Simulation and theoretical results are provided to demonstrate the effectiveness of our approach.

0.28

Reachability-Guided Sequential Quadratic Programming-Guarded Model Predictive Path Integral for Safe Nonlinear Predictive Control

cs.RO eess.SY ·2026-10-03 ·Alexandre Didier, Jason J. Choi, Namhoon Cho, Claire J. Tomlin, Melanie N. Zeilinger
similarity 0.56
Abstract

Safe robot control often requires combining long-horizon performance optimization with hard state and input constraints, but existing approaches tend to address this tradeoff partially. Sampling-based model predictive control (MPC) methods such as model predictive path integral (MPPI) are effective in handling nonlinear and nonconvex environments, yet their finite-sample rollouts and unconstrained weighted-average update can return an unsafe control. Deterministic nonlinear MPC can explicitly incorporate constraints, but its real-time safety and performance depends strongly on warm starts and local convergence. Hamilton--Jacobi reachability (HJR) provides rigorous safety certificates, but offline value-function computation remains practical only for reduced-order models. We propose ReSQ-MPPI, a reachability-informed generation--refinement architecture that combines these complementary strengths. An HJR value function computed offline for a reduced-order model guides online MPPI sampling toward safe, promising trajectory candidates. The MPPI solution is then refined by a small number of sequential quadratic programming (SQP) iterations in a full-order MPC problem. A key observation is that the standard MPPI inference step is an unconstrained weighted least-squares problem; ReSQ-MPPI replaces it with a constrained MPC refinement that recovers the MPPI update when it is feasible and minimally modifies it otherwise. Simulations in cluttered navigation and autonomous racing environments demonstrate that ReSQ-MPPI improves safety and performance over standalone MPPI, MPC, and reachability-filtered sampling-based control baselines.

0.18

Learning to Solve Mixed-Integer Nonlinear Programming with Neural Networks and Sequential Quadratic Programming Refinement

eess.SY math.OC ·2026-10-05 ·Viet-Anh Le, Rahul Mangharam
similarity 0.55
Abstract · 8 pages, submitted to ACC 2027

We propose a learning-to-optimize framework for solving parametric mixed-integer nonlinear programs arising in model predictive control and trajectory optimization. The proposed method combines neural network prediction with a sequential quadratic programming (SQP) refinement layer. First, neural networks are trained using a combination of supervised and self-supervised losses to predict integer solutions together with compatible continuous warm starts. To account for prediction inaccuracies, the trained predictor generates multiple candidate integer solutions, each paired with a continuous initialization. The integer solutions are then fixed, and a differentiable SQP layer refines the associated continuous variables over a prescribed number of iterations. The SQP-layer parameters, including the curvature regularization and step size, are trained to improve both feasibility and objective value after every iteration. By separating integer prediction from continuous optimization-based refinement, the proposed framework improves robustness to imperfect neural predictions while maintaining a predictable computational budget. We demonstrate the proposed framework on contact and trajectory optimization for a planar box-pushing example.

0.20

Sample-Efficient Model Predictive Control via Proximal Policy Optimization

eess.SY ·2026-11-17 ·Jiarui Wang, Sina Sharifi, Mahyar Fazlyab
similarity 0.55
Abstract

Sampling-based model predictive control (MPC) enables real-time control of complex nonlinear systems but often incurs substantial computational costs due to repeated trajectory simulations. In this paper, we bridge policy optimization in reinforcement learning and sampling-based MPC to improve computational efficiency through sample reuse. Starting from a KL-regularized distributional formulation of trajectory optimization, we derive an exact performance-difference identity based on a signed exponential advantage function. This identity motivates two algorithms, PPO-MPPI and SPO-MPPI, which adapt proximal policy optimization techniques to sampling-based MPC, enabling multiple optimization updates using previously evaluated trajectories without additional forward simulations. We establish population-level monotonic improvement guarantees for both methods and prove convergence to first-order stationarity for PPO-MPPI under fixed-covariance Gaussian sampling distributions. Experiments on quadruped velocity tracking and quadrotor path tracking demonstrate that the proposed methods achieve competitive control performance at substantially lower computational cost than multi-stage sampling approaches. Our results establish a principled connection between policy optimization and sampling-based MPC and highlight the potential of trajectory reuse for sample-efficient predictive control.

0.29