CS Paper Radar

EPIC: Differentiable Energy-Force Consistent Uncertainty Quantification and Propagation for Machine-Learned Interatomic Potentials

Tianhao Su, Musen Li, Shunbo Hu, Tong-Yi Zhang

cs.CE ·submitted 2026-10-31 13:44 UTC · v2

Abstract

Machine-learned interatomic potentials (MLIPs) now rival density functional theory in accuracy and are increasingly used to screen vast crystal databases, yet they can produce unreliable predictions for chemistries outside their training distribution without clear warning. Existing force-level evidential approaches do not inherently define a corresponding uncertainty model over the potential energy surface, limiting the consistent propagation of uncertainty to energy-derived observables. Here we introduce Energy-Propagated Intrinsic Confidence (EPIC), a general energy-centered evidential framework that derives forces as exact gradients of the predicted mean energy, ensuring conservative force fields while providing an analytical estimate of energy uncertainty. Coupled to a MACE backbone trained on the Materials Project trajectory dataset, EPIC propagates uncertainty diagnostics to equations of state, anisotropic structural uncertainty ellipsoids, and phonon dispersions through a Monte Carlo procedure. Applied to 10,966 candidate crystals, the fraction classified as robustly dynamically stable increases from 11\% in the highest-uncertainty quartile to 53\% in the lowest-uncertainty quartile. Furthermore, element-resolved analysis reveals a pronounced chemistry dependence in the relationship between epistemic uncertainty and predicted dynamical stability, highlighting potential limitations in the description of complex bonding environments. EPIC thus provides a physics-aware, chemistry-sensitive uncertainty diagnostic for high-throughput screening and autonomous materials discovery.

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Out-of-Distribution Uncertainty Quantification for Machine-Learned Interatomic Potentials via Pre-Training

cs.LG physics.chem-ph ·2026-10-30 ·Stefan P. Schmid, Tobias Setzer, Maximilian Scheurer
hot direction similarity 0.70
Abstract

Informative uncertainty quantification (UQ) is essential for the practical deployment of machine-learned interatomic potentials (MLIPs), as it provides insight into their reliability across chemical space. Although numerous post-hoc uncertainty estimation methods for MLIPs have recently been proposed, most have been trained in low-data regimes, restricting their applicability to narrow domains of interest. Inspired by the emergence of foundational MLIPs, we propose pre-training uncertainty estimators on large, diverse datasets to enable broader applicability. We pre-train several UQ models on large materials science datasets to quantify the uncertainty of different MLIPs, and evaluate their performance on both in-distribution and out-of-domain (OOD) adsorption-energy predictions. We find that pre-trained uncertainty estimators provide viable zero-shot uncertainty estimates across multiple datasets, while fine-tuning consistently yields positive correlations between predicted uncertainty and prediction error, even on the most challenging datasets. These results lay the groundwork for foundational UQ models for MLIPs, ultimately facilitating their deployment in practical settings by providing users with a priori information about model reliability and applicability.

0.26

Multi-Fidelity Training Reshapes Uncertainty Decomposition in Atomistic Models

cs.LG cs.AI ·2026-10-26 ·Matteo Tolloso, Davide Bacciu, Luigi Bonati
hot direction similarity 0.66
Abstract

Multi-fidelity training, which combines abundant low-fidelity data with scarce high-fidelity labels, is increasingly common in atomistic modeling, but its effect on predictive uncertainty remains largely unexplored. We investigate this question using deep ensembles of mean-variance MACE models trained on ANI-1x, contrasting high-fidelity training from scratch with low-fidelity pretraining followed by fine-tuning. We characterize aleatoric, epistemic, and total uncertainty throughout training and under two distribution shifts: unseen molecular systems and higher-energy configurations. We find that pretraining reduces prediction error and improves uncertainty-based ranking across all test sets, but does not yield well-calibrated predictive variances; calibration deteriorates more severely under energy extrapolation. Training-dynamics analysis localizes most of this calibration degradation to high-fidelity optimization, during which the learned aleatoric variance becomes overconfident on held-out data. Moreover, multi-fidelity fine-tuning produces a more effective uncertainty-based acquisition function than high-fidelity training from scratch. These findings show that uncertainty ranking and calibration capture distinct properties and must be assessed separately in multi-fidelity atomistic models, especially under extrapolation.

0.26

Data-driven candidate structure ensemble generation beyond the convex hull with crystALL approach

cs.CE cond-mat.mtrl-sci ·2026-11-02 ·Adam M. Krajewski, Ricardo Amaral, Jonathan W. Siegel, Luke A. Myers, Rushi Gong +2 more
code/data similarity 0.65
Abstract · 19 pages, 7 figures, software repository https://github.com/PhasesResearchLab/crystALL

Real materials consist of multiple stable or metastable states under real-world conditions, existing as statistical ergodic ensembles of configurations rather than ideal crystals. Yet, data-driven computational materials discovery increasingly biases itself toward finding "new stable structures" from ground-state DFT calculations alone. This limits our long-term ability to discover materials whose properties emerge from metastable phases, to explain experimental observations, or to model thermodynamic behavior comprehensively. Predicting ergodic sets of atomic configurations of known and hypothetical solids is a fundamental challenge in theoretical crystallography, approached via many complementary methods. We discuss this conceptually and introduce crystALL, a pragmatic and powerful data-driven approach to discovering ensembles beyond the convex hull, embracing structural diversity over stability alone, enabling robust experiment matching in cases evading traditional methods. crystALL leverages 5 million relaxed structures from OPTIMADE and MPDD to rapidly generate a comprehensive candidate set by: (1) species substitutions; (2) ML feature-space analysis with pySIPFENN; (3) representative structure selection via clustering and energy-minimization or property matching; and (4) construction of the final candidate ensemble for experimental or ab initio validation. We also uniquely address the common challenge of experimental composition uncertainties spanning many integer stoichiometries by new efficient searches across anonymized compositional ranges rather than fixed formulas. Overall, crystALL's ensemble-focused philosophy provides critical advantages over the prevailing convex-hull-searching paradigm, which often fails to account for key experimental observations and increases AI/ML discovery bias over time - akin to model collapse in LLMs retrained on iteratively generated content.

0.23

Risk-Controlled DFT Selection for Machine-Learned Interatomic Potentials

cs.LG stat.ML ·2026-10-14 ·Kun Ryu, Yeo Jin Jung, Shyue Ping Ong, Claire Donnat, Ying Shirley Meng
similarity 0.65
Abstract

Automated materials discovery requires evaluating large pools of candidate configurations, with density functional theory (DFT) as a major throughput bottleneck. Pretrained machine-learned interatomic potentials (MLIPs) approximate DFT cheaply, but their errors vary by orders of magnitude across configurations, making it difficult to decide when to trust the MLIP predictions and when to fall back to DFT. We frame this decision as a risk-controlled selection problem and solve it within a conformal risk control (CRC) framework. Each configuration is mapped from atomic numbers and Cartesian coordinates to a fixed geometric descriptor, which a lightweight predictor uses to estimate an MLIP-DFT disagreement score in energy, average force, and maximum force. CRC then calibrates this score into a selection threshold for DFT labeling such that the MLIP error on the unselected configurations, which keep their MLIP labels, stays below a user-chosen fraction $α$ of the expected error. Under an identical guarantee across eight dataset-MLIP pairs, our predictor routes 7% and 14% fewer configurations to DFT at $α=0.3$ than committee baselines. Because committee disagreement overlooks errors the MLIPs share, our gains are largest when the DFT labels and MLIP training data differ in DFT functional and basis set, and narrow when the two agree. Without model access, the structure-only predictor also ranks errors as well as the target MLIP's latent representation and outperforms widely used descriptors such as Smooth Overlap of Atomic Positions (SOAP) and Atom-Centered Symmetry Functions (ACSF).

0.16

Hessian-Informed Conformation Augmentation for Potential Energy Surface Curvature in Machine Learning Interatomic Potentials

cs.LG physics.chem-ph ·2026-09-04 ·Bumju Kwak, Jeonghee Jo
code/data similarity 0.65
Abstract · 51 pages including Supporting Information, with 9 figures and 7 tables in the main text. Code available at https://github.com/fromjade/Hessi…

While machine-learning interatomic potentials (MLIPs) have successfully learned potential energy surfaces (PES) and atomic forces, many practical applications, such as vibrational analysis and transition state search, rely heavily on the PES Hessian. Yet standard MLIPs are trained on energy and forces only, and using the Hessian as an additional training objective requires backpropagation whose memory cost grows quadratically with the number of atoms. To address these limitations, we propose two Hessian-derived data augmentation schemes: isotropic Gaussian displacement (\textbf{UniAug}) and normal mode-weighted displacement (\textbf{ModeAug}). Both methods utilize simple Taylor expansions, generating physically grounded molecular structures with highly accurate energy and force labels. By preserving the underlying MLIP architecture and training procedure, this approach contributes to improving energy and force predictions in various benchmarks. Comprehensive evaluations across non-equilibrium and equilibrium datasets demonstrate that our approach enhances model accuracy where reference forces are large and training data are limited.

0.49

SoLiD26: A First Principles Solid-Liquid Interface Dataset for Machine-learned Interatomic Potentials

cs.LG cond-mat.mtrl-sciphysics.chem-phphysics.comp-ph ·2026-09-23 ·Jonas Busk, Emil J. P. Frost, Yogeshwaran Krishnan, Henrik H. Kristoffersen, August E. G. Mikkelsen +5 more
similarity 0.64
Abstract

Machine-learned interatomic potentials (MLIPs) enable simulations of larger atomistic systems over longer timescales than traditional ab initio methods but require large, diverse training data. Existing datasets lack comprehensive sampling of solid-liquid interfaces, which exhibit complex phenomena such as solvent layering and surface reconstruction critical for energy and catalytic materials. Here, we present SoLiD26, a curated solid-liquid interface dataset of 15.4 million first-principles structures with up to 576 atoms and 15 chemical elements for training and evaluating MLIPs. The structures were compiled from density functional theory (DFT) calculations, with most configurations originating from ab initio molecular dynamics (AIMD) simulations. SoLiD26 includes aqueous coinage metal interfaces, electrode-electrolyte systems, and selected bulk reference structures, calculated with VASP using the PBE functional and D3 dispersion corrections. The application of SoLiD26 for training and evaluating MLIPs is demonstrated with a suite of MACE models on a simple training, validation and test split. This dataset provides a valuable resource for advancing MLIP development targeted at modelling solid-liquid interfaces in electrochemical and catalytic systems.

0.17

Learning consistent molecular mechanics force fields from first principles

cs.LG physics.chem-phphysics.comp-ph ·2026-10-06 ·Berkay Günes, Leif Seute, Jigyasa Nigam, Frauke Gräter
published similarity 0.63
Abstract · Accepted to the ML4Molecules Workshop at NeurIPS 2026

Classical force fields (FFs) remain the workhorse for large-scale simulations even as machine-learned interatomic potentials (MLIPs) approach ab initio accuracy. They decompose total configuration energies into simple effective interactions whose parameters are traditionally assigned based on atom or bond types, enabling efficient simulations but also limiting their ability to adapt across configurations. Recent machine learning approaches have improved the accuracy and transferability of bonded parameters in these FFs by inferring them as functions of local atomic environments, but still rely on empirical nonbonded parameters for practical simulations. In this work, we introduce a unified approach, \texttt{grappa-fullFF}, which learns both bonded and nonbonded parameters \emph{consistently} and simultaneously from ab initio reference data. By incorporating physically inspired regularization via supervision of the electrostatic potential and an architecture that facilitates charge equilibration, our model recovers accurate electric response properties, achieves state-of-the-art accuracy on geometry optimization benchmarks, and reproduces the conformational sampling of both classical and existing machine-learned FFs, without relying on externally assigned nonbonded parameters.

0.32

Distilling Large-Scale Machine Learning Interatomic Potentials to Predict Long-Timescale Electrolyte Transport Properties

cs.LG physics.chem-phcond-mat.mtrl-scicond-mat.soft+1 ·2026-10-29 ·Ishan Amin, Yue Jian, Nitesh Kumar, Christine Zhang, Jianwei Lai +8 more
similarity 0.63
Abstract

Accurately predicting the transport properties of liquid electrolytes is critical for next-generation battery design and requires force fields that are both quantum-mechanically accurate and fast enough for long-timescale simulation. Recent large-scale pretrained machine learning interatomic potentials (MLIPs) approach density-functional-theory accuracy, but remain too slow to access the necessary timescales to converge transport properties. We provide a knowledge distillation procedure to transfer the accuracy of a large-scale "teacher" MLIP into fast, system-specific "students", without any additional ab initio data. Our distilled models run ~40x faster, reproduce teacher-predicted structural observables, and produce stable 20 ns trajectories in days, rather than the months the teacher would require. Across a diverse set of sodium- and lithium-ion electrolytes, student-predicted self-diffusivities, ionic conductivities, and shear viscosities track experiment and outperform classical force-field predictions, establishing distillation as a practical route to accurate, long-timescale simulations necessary for high-throughput electrolyte screening.

0.22