CS Paper Radar

Investigating ET-SoC-1 Vector and Parallel Performance with sGEMM

Richard Neale, Nick Brown

cs.DC ·submitted 2026-10-31 15:36 UTC · v1
publishedbenchmark

Abstract

The Ainekko (formerly Esperanto) ET-SoC-1 is a massively parallel RISC-V accelerator. Its compute array comprises 1024 dual-threaded in-order ET-Minion cores (2048 harts) operating at 600 MHz, each core providing an eight-lane 256-bit packed-single (PS) SIMD datapath shared by its two harts, with access to LPDDR4X memory at a nominal 133 GiB/s. This paper presents a performance investigation using single-precision general matrix multiplication (sGEMM) as the benchmark kernel. Two device kernels are implemented and evaluated on the ET-SoC-1, these are a register-blocked PS SIMD baseline with two-step software pipelining, and a TensorFMA32 kernel that drives the same FMA datapath through the per-core tensor micro-operation sequencer, with double-buffered A scratchpad loading. Because both kernels are bounded by the same arithmetic peak, the comparison isolates the effect of operand delivery from that of arithmetic width. Performance is compared against CPU references (SpacemiT K3, Intel i5-11600, AMD Ryzen 9 9950X and the Arm Cortex-X925/A725 CPU of an NVIDIA DGX Spark) and two GPUs (NVIDIA GB10 Blackwell and AMD RDNA4 RX 9060 XT).

Comment
Author accepted version of paper published in RISC-V for HPC workshop at SC26

Closest papers

Nearest neighbours by meaning across the whole index.

Superscalar Loop Processors

cs.AR cs.DC ·2026-11-01 ·Luca Colagrande, Pascal Etterli, Luca Benini
top venuecode/data similarity 0.66
Abstract · Accepted at MICRO 2026

To sustain the computational demands of modern ML and HPC workloads, programmable accelerators integrate large arrays of processing elements (PEs), typically built around single-issue in-order cores to maximize integration density and energy efficiency. As a result, each PE's instruction throughput is upper-bounded at one instruction per cycle (IPC), often suffering from significant underutilization of its functional units (FUs). Conventional superscalar processors can improve FU utilization by increasing IPC, but they typically incur substantial area and energy overheads. This work proposes the Superscalar Loop Processor (SLP) architecture, a lightweight approach to superscalar execution that targets regular, compute-intensive loop kernels. We present the SLP execution model, which exploits the static structure of these workloads to enable efficient multiple-issue execution without the complexity of dynamic out-of-order scheduling. We demonstrate the SLP architecture through an open-source prototype implementation, Schnizo, developed as an enhancement of a tiny RV32I core with floating-point support. Across several ML and HPC microkernels, Schnizo achieves substantially higher IPC and FPU utilization than the scalar baseline while retaining the efficiency of lightweight in-order designs. These results demonstrate that SLPs can provide an efficient architectural solution for programmable accelerators targeting regular, compute-intensive workloads.

0.51

Parallelizing the Factorial Space: Multi-Core OpenMP Scaling and Scalable SIMD Acceleration of the Steinhaus-Johnson-Trotter Algorithm via Dual-Lane AVX2 Execution

cs.DS ·2026-09-07 ·Serge Melnikov
similarity 0.66
Abstract · Added extended framework with multi-core parallel execution via OpenMP, introduced dynamic state mapping and thread scalability benchmarks u…

This paper presents a high-performance SIMD acceleration framework for the Steinhaus-Johnson-Trotter algorithm, targeted at modern x86-64 architectures using the AVX2 instruction set. By exploiting a novel combinatorial space partitioning combined with single-cycle vector byte shuffling ($\texttt{\_mm256\_shuffle\_epi8}$), our dual-lane vectorized implementation processes two independent, concurrent permutation streams within a single 256-bit YMM register under a uniform execution mask. Empirical evaluations demonstrate a $3\times$ throughput increase over an optimized scalar baseline of Knuth's Algorithm P (accelerated by $3\times$ via isolated sweeping branches) and outperform the recent Ring-Cascade algorithm by Yusheng Hu, completely avoiding store-forwarding stalls during hot loops. To scale this engine across multi-core processors, we extend the framework into a highly concurrent environment via OpenMP using a localized mathematical state decoder and macro-period loop scheduling. The parallel performance is shown to scale strictly and linearly with the number of active physical processor cores ($\text{Speedup}(M) \approx M$) due to a lock-free thread-local accumulation pipeline that eliminates false sharing. On a 6-core processor, the multi-threaded engine delivers a $5.25\times$ throughput gain for $n=14$ ($3.25$ billion CPU cycles) and processes the massive $n=15$ space in just $16.0$ seconds, yielding a $5.25\times$ speedup over the sequential vector baseline, while Hyper-Threading virtual cores yield zero additional throughput due to physical SIMD port saturation.

0.26

Easy Multi-Precision Acceleration via Vectorization

cs.PF cs.DC ·2026-11-03 ·Chansup Byun, Piotr Luszczek, Jeremy Kepner, LaToya Anderson, William Arcand +16 more
similarity 0.66
Abstract

High level programming languages and accelerators are powerful enablers for a wide range of applications. Accelerators offer significant performance via diverse numeric precision and increased memory bandwidth and capacity. These enable new algorithms to be explored. Construction of these algorithms can be enabled by the ready accessibility of these performance features in high-level languages. Achieving scalable vertical (within a compute node), precision (over various numeric precisions), and temporal (over different generations of hardware) performance while retaining productivity requires effective abstractions. Vectorized coding that expresses operations as high-level matrix mathematics has historically been an important method for achieving portable performance. This paper examines the performance availability across a wide range of precisions and hardware using simple vectorized coding techniques applied to several example programs that highlight bandwidth, real and complex matrix multiplication, and 2D convolution. The systems evaluated span nearly a decade of computing hardware, enabling direct comparison of performance gains over this period. This work demonstrates that near hardware peak performance is readily accessible from high-level programming environments. In particular for memory bandwidth, real and complex matrix multiplication in double/single/half precision, and 2D convolutions using the Fast Fourier Transform (FFT). Furthermore, algorithms that trade decreased compute intensity for increased memory intensity have significant potential.

0.24

To SIMD or Not to SIMD: Comparing RVV vs. CGRA SoCs for Non-Linear Functions in AI

cs.AR cs.AI ·2026-11-09 ·Sameer Deshmukh, Naoya Mizuki, Takumi Honda
published similarity 0.66
Abstract · Published in the H2RC workshop at the International Conference on High Performance Computing, Networking, Storage and Analysis 2026

Non-linear functions are an important class of operations in modern large language models. However, chip vendors building for AI have so far relied on traditional vector or scalar processing units for non-linear functions. The performance of these units has not kept pace with matrix multiplication units (MMUs), which can be found in both high-performance and edge-computing devices from almost every vendor. Reconfigurable units such as FPGAs and CGRAs have been proposed in the literature, but have not been systematically compared with traditional units backed by MMUs. In this paper, we build two SoCs: one using an RVV vector processor and the other using a latency-insensitive (\emph{elastic}) CGRA, both coupled with an MMU and driven by a single-core CPU. We then propose mappings for common feed-forward networks on our SoCs and find that the CGRA reaches a maximum speedup in clock cycles of 7.12x over RVV on the activation stage of simple point-wise non-linear functions like SiLU, whereas the RVV reaches a maximum speedup of \textbf{9.8x} over the CGRA on complex non-linear functions such as $\mathrm{softmax}$. Over the enclosing feed-forward block the corresponding maxima are 3.16x and 4.24x.

0.31

Reorienting the Vector Axis: Restructuring FlashAttention for Long-Vector Processors

cs.AR cs.DCcs.PF ·2026-10-21 ·Emmanuel Irabor, Marc Casas
similarity 0.65
Abstract

A Transformer is built around attention, whose cost grows with the square of the sequence length and dominates the layer on long sequences. FlashAttention made that cost manageable by tiling the attention matrix and updating the softmax as it goes, but almost all work since has targeted GPUs. On long-vector processors one vector register can hold up to 512 single-precision numbers. The savings of a vector instruction are proportional to how much of the register it uses, so the choice of which loop to vectorize is a first-order decision. We port PyTorch's CPU FlashAttention kernel to a RISC-V CPU with 2KB vector registers and find that it reaches 16.2% of peak floating-point throughput. The kernel walks each tile one query row at a time: the product against V is vectorized along the 64-element head dimension, the softmax's per-row maximum and sum are reductions that collapse a full register to a scalar, and the software exponential's polynomial coefficients compete with tile data for vector registers and cause spilling. We propose two techniques. The first transposes the score tile and the running output so that queries lie along the contiguous axis. The algorithm and its values are unchanged. A single parameter, the number of queries in a tile, now sets the vector length of every part of the kernel and can be matched to the machine. Both reductions also disappear. The second moves the polynomial's coefficients into scalar registers, removing the spills and cutting the softmax's vector memory instructions by 78.7%. On silicon the two together cut whole-kernel cycles by 1.84 to 2.08x at a head dimension of 64, raising floating-point utilization from 16.2% to 29.7% of peak. An FPGA of the same design ranks the changes identically and scores them higher, at 2.71x.

0.06

FP64 Performance and the Limits of Ozaki Emulation on HPC Systems

cs.DC math.NA ·2026-11-09 ·Katarzyna, Swirydowicz, Nicholas Malaya, Noah Wolfe, Paul Bauman +2 more
similarity 0.65
Abstract · 11 pages, 7 figures

A growing industry narrative holds that native double precision can be deprioritized in HPC accelerators, on the hypothesis that low-precision tensor cores can emulate FP64 on demand, and that most HPC workloads are bandwidth-bound. This paper evaluates some of those claims and explores the importance of FP64 in scientific computing. We show roofline profiling data of representative HPC workloads, across a variety of common computational motifs, to evaluate the arithmetic-intensity and accuracy requirements of these workloads. We also consider FP64 emulation via the Ozaki method to ascertain some of the possibilities and limitations of these approaches. These results indicate that Ozaki emulation should not be evaluated as a general replacement for FP64, but as an optimization for the subset of workloads whose dominant computation is sufficiently large, dense, and GEMM-shaped. Our analysis indicates this is less than 10\% of the HPC ecosystem. Furthermore, even in this favorable regime, standalone GEMM speedup is not enough to accelerate (or avoid performance regression) for the application: numerical behavior, workspace requirements, matrix shape, and integration overhead determine whether the benefit survives at application scale. This paper characterizes those boundaries empirically. Furthermore, we show that dense GEMM accounts for only a small fraction of FP64 computation across HPC workloads, leaving most application-level FP64 work beyond the reach of GEMM-based emulation.

0.31

AscSpMM: Efficient SpMM on Ascend NPUs via Pipelined Vector-Cube Collaboration

cs.AR ·2026-11-09 ·Fei Li, Haoxin Li, Kehong Liu, Yanzi Zhou, Weiguo Wu +3 more
code/data similarity 0.64
Abstract · 13 pages, 11 figures

Neural processing units (NPUs) provide high compute density and energy efficiency through specialized matrix engines and software-managed on-chip memory. However, their libraries primarily target dense computation. Sparse matrix-dense matrix multiplication (SpMM), a key kernel in graph analytics, sparse neural networks, and scientific computing, requires index-driven operand selection, indirect addressing, scattered memory accesses, and load balancing. These requirements conflict with the fixed shapes and contiguous layouts preferred by NPU matrix engines. GPU Tensor Core SpMM methods cannot be directly transferred to NPUs with decoupled vector and matrix engines. We present AscSpMM, which separates irregular operand preparation from regular matrix computation through a parameterized Vector-CSR representation. The vector engine decodes indices and gathers and reorganizes dense operands, while the Cube engine performs matrix multiply-accumulate operations. A double-slot ring buffer enables dependency-aware asynchronous pipelining, while operand reuse and runtime-adaptive tiling reduce cross-engine stalls. On an Ascend 910B3, AscSpMM achieves geometric-mean speedups of 2.36x over GEMM, 19.92x over an existing SpMM implementation, and 5.82x over cuSPARSE on an A100. It reduces matrix-input storage and peak HBM footprint by 48.24% and 22.98% on average, while remaining competitive with specialized GPU Tensor Core SpMM kernels. The code is available at https://github.com/LfLab-AI/Ascend-NPU-SpMM.

0.34

Adaptive Matrix Multiplication for Dynamic Shapes on Ascend NPUs

cs.AR ·2026-08-11 ·Yuhang Zhou, Jiang Peng, Qianyu Jiang, Zhibin Wang, Xinghui Tian +5 more
similarity 0.64
Abstract

Matrix Multiplication (MatMul) faces a "generalization crisis" driven by highly dynamic tensor shapes. This crisis is particularly acute on Ascend NPUs, where explicitly controlled architectures and strict physical constraints render existing GPU-centric optimizations ineffective. To resolve this, we propose AdaptCore, an adaptive framework for universally high-performance MatMul on Ascend NPUs. AdaptCore systematically decouples operator optimization into spatial tiling and instruction orchestration. It first maps dynamic shapes into a hardware-aware 2D tiling taxonomy to balance on-chip capacity limits and multi-core parallelism. Furthermore, it integrates a composable optimization library with a deterministic analytical performance model. By mathematically evaluating hardware state mutations, AdaptCore proactively selects and caches optimal implementations, enabling O(1) overhead runtime dispatching. Evaluations demonstrate that AdaptCore delivers a remarkable 1.85x mean speedup across 80,000 input shapes, and achieves up to a 1.48x acceleration in representative end-to-end models over the highly-tuned native vendor library (ACLNN).

0.04