CS Paper Radar

What Must Be Done Here? Using a Bounded Application-Security Ontology at the Point of Change

Pedro Farinha

cs.CR cs.SE ·submitted 2026-10-31 17:15 UTC · v1

Abstract

The security guidance that bears on code is real but scattered. It lives across secure-development frameworks, verification standards, controls catalogues, threat taxonomies, and, increasingly, normative regimes such as the EU's NIS2 -- and most of it is written for readers other than the engineer, or the AI assistant, at a point of change. Existing cybersecurity ontologies largely model attacks, indicators, and risk for detection and analysis, not the engineering-practice substance one must act on. This paper presents a use case for an existing bounded application-security ontology, AppSec Core, whose construction and validation are reported separately. We show how it is used. It makes the engineering-actionable fraction of those authorities addressable as a typed working set: the control objectives that apply, the practices that realize them, the mechanisms that implement them, and the evidence artifacts they expect, each traceable to the sources that justify it. We reach that working set from two entry points that recur in practice. Forward, from a code change: a change to authentication middleware scopes to its governing domain slice and returns the obligations the change must satisfy. Inverse, from a normative obligation: "make this NIS2-compliant" resolves a generic legal duty into the concrete engineering obligations it implies across slices, surfacing precisely the fraction of a mostly-governance regulation that lands in code. The same working set is what a human engineer reads and what an LLM-grounded assistant is handed as grounding. The use turns "read every applicable authority" into "satisfy this typed working set", for a code change or a compliance duty alike. The contribution is the demonstrated use; the artefact, its validation, and its governance are companion work.

Comment
8 pages, 2 figures. Accepted at Semantic Shields 3: the 3rd International Workshop on Modeling for Cybersecurity, co-located with JOWO 2026 / FOIS 2026, Vitória, Brazil, September 2026. To appear in the JOWO 2026 proceedings (CEUR-WS)

Closest papers

Nearest neighbours by meaning across the whole index.

AppSec Core: An Ontology for Security-by-Design Software Engineering

cs.SE ·2026-11-12 ·Pedro Farinha
benchmarkcode/data similarity 0.81
Abstract · 24 pages, 4 figures, 6 tables. Supersedes OSF preprint doi:10.17605/OSF.IO/WG8PV

When engineers or coding agents change an application, a dependency, a configuration or a build pipeline, they need to know three things: which security rules apply, how to meet them, and what evidence to leave. Today the answers are spread over many standards, frameworks, laws and lists of weaknesses, and each one uses its own words and level of detail. This paper presents AppSec Core, a model of the security work that engineers do. It says what must be true, which practices get there, which mechanisms do the job and which artefacts show that it was done. It has 259 elements in ten domains. We built it from a security-by-design manual written from practice, and then checked it against 31 outside sources, ten of them about AI systems and agents. Along the way we made three changes, which added five objectives and made one domain wider. We did not need a new domain. Most objectives are backed by several sources: the typical objective is used by six of the twenty technical sources, and 194 of the 202 objectives, practices and mechanisms are linked to items in the sources. For the domain of a change, the model gives back a closed set of typed elements, and for a source, it gives back the objectives that the source points to. We keep the model apart from the manual, the selection rules and the server that delivers the result, and we follow one change, adding a third-party package, through all four. When a code generator received the requirements, the share of security tests passed on a public benchmark went from 77.4% to 93.0%. On a second benchmark, the result was close to that of the benchmark's own "oracle" prompt, which is written with the tests in mind.

0.51

SecureGARD: Dynamic Ontology-Guided Governance for Secure Tool-Using LLM Agents

cs.LG ·2026-11-04 ·Guoqin Xiong, Shengtao Wen, Xiang Chen, Xinyi Zeng, Zhaoxin Fan +3 more
similarity 0.65
Abstract

Tool-using large language model (LLM) agents translate model outputs into consequential actions, turning indirect prompt injection into an execution-security problem. Existing defenses constrain tool calls, trajectories, or information flows, but often leave action semantics, state dependencies, and evidence relations implicit, limiting generalization across heterogeneous tools and complicating safe updates. We present SecureGARD, a dynamic ontology-guided governance framework. SecureGARD grounds heterogeneous calls in a shared semantic representation and combines an executable ontology with episode-level task state to derive deterministic ready, waiting, and forbidden decisions. A waiting decision identifies an unmet but recoverable obligation, enabling bounded replanning without expanding the agent's authorization boundary. SecureGARD evolves its ontology offline from verified training executions. An offline LLM proposes instance-independent action-state axioms, which are accepted only if they address ontology errors exposed by training failures, preserve logical consistency and protected entailments, and pass held-out validation before the ontology is frozen. We evaluate SecureGARD on AgentDojo, ASB, and AgentDyn under benign and indirect prompt-injection settings. SecureGARD achieves a 0% attack success rate (ASR) across all three benchmarks while improving task utility under attack compared with existing baselines. These results show that explicit semantic governance can strengthen execution security without indiscriminate blocking.

0.17

Developing Security Metrics for Automated Compliance Checking

cs.CR ·2026-10-23 ·Immanuel Kunz, Nico Haas, Angelika Schneider, Christian Banse
publishedcode/data similarity 0.64
Abstract · 15 pages, 1 figure, 1 table. Author-accepted manuscript of a paper published in the proceedings of IFIP SEC 2026. The final authenticated ve…

To automatically check for compliance with security-related standards, prose requirements must be translated to technical properties to make them measurable. A multitude of metrics have been proposed in past literature, but they are lacking a systematic methodology for their elicitation. Without such a methodology, metrics remain inconsistent in their data models and abstraction levels, they exhibit considerable overlaps and are difficult to combine to comprehensively cover a standard's requirement. In this paper, we develop a data model for security metrics based on a systematization of compliance requirements, and we propose a methodology for their elicitation. The method is based on an ontology that enables a systematic development of metrics with a comparable degree of abstraction. We also present our initial work on an open-source effort that demonstrates that our approach also supports a collaborative development of metrics.

0.71

Towards Tackling Application Logic Flaws through Autonomous Formal-Logic Modeling and Automated Reasoning

cs.CR ·2026-09-09 ·Yiwei Fang, Yichen Liu, Luyi Xing
similarity 0.63
Abstract · 13 pages, 3 figures, 3 tables

Logic flaws pose significant challenges in the design and implementation of modern, semantically rich systems and applications, impacting security, privacy, and trust. These flaws are inherently tied to business-specific semantics and threat models, making their discovery and reasoning difficult and hard to scale. Real-world systems often exhibit diverse application features, complex protocol logic, and domain-specific threat models, necessitating substantial human effort and domain expertise for effective security analysis. In this paper, we introduce LL-Verifier, a novel, automated framework for identifying logic vulnerabilities built on (1) large language models for autonomous modeling, and (2) logic model checkers for rigorous reasoning. LL-Verifier processes natural language inputs, in particular protocol descriptions and security goals, to automatically generate formal logic models and properties expressed in a new logic language built on a generic logic language Maude, optimized for modeling arbitrary application-level semantics. These formal models are then converted into logical state machines, enabling exhaustive, rigorous verification through logic level model checking. This approach streamlines the analysis of diverse, application-level protocols deployed in real-world scenarios, offering automated, exhaustive, and precise reasoning within their logical constraints. We evaluated the high effectiveness, efficiency, and practicality of LL-Verifier by applying it to 27 access control protocols of widely used IoT devices, which come with vendor-specific logic flows and semantics. While LL-verifier tackles a hard problem in application security, i.e., automatic logic flaws discovery, our analysis uncovers a range of sophisticated logic vulnerabilities in IoT protocols and devices with serious security and privacy implications.

0.23

XPhysICS: Cross-Physical-Domain Threat Grounding for Industrial Control Systems Security

cs.CR cs.AI ·2026-09-25 ·Sangshin Park, Jainta Paul, Lawrence Ponce, Md Raihan Ahmed, Mu Zhang +1 more
similarity 0.61
Abstract · 35 pages, 5 figures, 12 tables; revised abstract, overview figure, method description, and appendix layout

Industrial control system attacks are usually documented in terms of the plant where they occurred: its sensors, actuators, process stages, and control logic. Yet many attacks express a more general physical pattern--such as suppressing flow, corrupting chemical dosing, or driving a vessel toward overflow--that may also matter in a different plant. The challenge is deciding when such a threat remains meaningful on a new system rather than relying on similar component names or broad semantic labels. We present XPhysICS, a methodology for grounding documented cyber-physical threats onto a specific target system. XPhysICS converts source evidence into a provenance-linked description of what is manipulated, what physical consequence is expected, and what observations the evidence calls for. Once this analyst-guided abstraction, its vocabulary and schema version, and a target contract are fixed, XPhysICS applies deterministic grounding checks. An accepted result can be represented as a validation slice that records the mapped roles, signals, dependencies, and context intended to support later evaluation. We study 83 threat abstractions across continuous-process and manufacturing sources using separate evaluation denominators. The continuous-process study evaluates 78 abstractions against target contracts spanning water treatment, water distribution, hydropower, and chemical processes. Selected cases are exercised through controlled perturbations of simulator-role signals. We also test compatibility with several analysis styles, including the released upstream GeCo implementation, and conduct a three-objective, one-target realizability study using a paper-derived search reproduction. Across these evaluated settings, the results support treating explicit target checks and traceable evidence as separate from semantic similarity alone.

0.41

TopoIntent: Compiling Security Intent into Executable, Compliance-Checked Network Topologies

cs.AI cs.CRcs.NI ·2026-08-13 ·Xiaokang Qu, Jianliang Ma, Zao Fan, Tianshu Chu, Tianlong Fan +1 more
benchmark similarity 0.60
Abstract

Enterprise security topology design requires translating business intent, regulatory requirements, and risk assumptions into zones, boundary devices, inter-zone paths, and access-control policies. Existing NetOps automation tools mainly operate after this design is fixed, providing limited support for generating structured security topologies from underspecified natural-language requirements. We present TopoIntent, a system that compiles security intent into executable, compliance-checked network topologies. It uses a schema contract to constrain generation, retrieves reference architectures from a curated template library via dense-vector search, and applies staged fusion for intent-template alignment and security completion. The generated topology is checked against CIS Controls v8.1.2 safeguards visible at the topology layer, while unresolved cases are marked for manual review. Structural gaps are repaired through additive schema-preserving edits. The final topology is exported to Mininet scripts with kernel-level iptables ACLs, enabling executable reachability and allow/deny tests. Because no public benchmark exists for this requirement-to-topology task, we construct an evaluation set from reference security architecture diagrams. The retrieval set contains 22 templates and 44 synthetic intents across five scenarios, while the held-out set contains 7 templates and 14 intents from finance and government scenarios excluded from retrieval. On the held-out set, additive repair improves topology-visible CIS satisfaction from 0.78 to 1.00 in fewer than 1.5 rounds on average, and one feedback round raises the post-ACL policy pass rate from 0.78 to 0.88.

0.04

From Requirements to Attack Trees: Grounded LLM Agents for Design-Time Security Review

cs.CR cs.AI ·2026-10-02 ·Akash Iyer, Taha Demirkan, Keerthi Koneru, Aaryan Siddharthan, Sheethal Kumar +1 more
similarity 0.59
Abstract

Design-level security weaknesses can arise from requirements, trust assumptions, missing controls, and data flows before implementation begins. Existing security practices often identify these issues after code is written. We present a multi-agent LLM framework for design-time security analysis from product requirement documents and architecture diagrams. The proposed framework parses architecture diagrams into graph representations, generates misuse and failure cases, constructs attack trees, checks governance and compliance gaps, recommends mitigations, assigns enterprise security-domain tags, and produces a candidate revised architecture recommendation for expert review. The framework does not retrieve from Common Weakness Enumeration (CWE) databases at inference time. Instead, it analyzes system behavior, trust boundaries, component interactions, and data-flow assumptions. Misuse cases act as intermediate representations that link findings to system components and attack paths, while a validation and refinement loop filters unsupported findings and improves grounding, traceability, and actionability. We evaluate the framework on a Microsoft reference-labeled threat-modeling example, labeled synthetic PRD--architecture pairs, and two open-ended systems: Berty and Gas Town. The reference-labeled case supports threat-recovery and actionability analysis, while the open-ended cases evaluate validity, noise, traceability, actionability, redundancy, and attack-tree quality. Results show that architecture-informed, misuse-driven reasoning improves review quality compared with single-shot and ablation baselines. Keywords: LLM Multi-Agent Systems, Design-Time Security, Threat Modeling, Vulnerability Discovery, Architecture Diagrams, Security Analysis, Misuse Case Derivation, Attack Trees, Iterative Reasoning, Security Governance.

0.20

Atomic Security Concerns: Towards a Foundational Language for Security Knowledge Representation

cs.CR cs.CL ·2026-10-26 ·Hanane Houmani
similarity 0.59
Abstract

Cybersecurity governance, risk management, compliance, and security architecture rely on numerous concepts, including security properties, domains, controls, risks, implementation measures, capabilities, and compliance requirements. Although these concepts are widely used, they are often represented through heterogeneous abstractions and vocabularies, making relationships among them difficult to express consistently and leaving much of the associated reasoning dependent on expert knowledge. This paper introduces the concepts of Security Concerns and Atomic Security Concerns (ASCs) and explores the hypothesis that cybersecurity knowledge may be represented through a finite set of foundational concerns. Inspired by the role of atoms in chemistry, the proposed approach views cybersecurity concepts as compositions of more fundamental concerns rather than as independent abstractions. Hence, Atomic Security Concerns could be viewed as a common abstraction layer for the representation of cybersecurity concepts, independently of their domain, nature, or level of granularity. Building upon this perspective, the paper explores how Atomic Security Concerns may provide the vocabulary of a cybersecurity language and how cybersecurity concepts may be represented as concern sets supporting explicit relationships among concepts. The contribution of this work is intentionally conceptual: it introduces a framework and research hypothesis for investigating the foundations of a common language for cybersecurity knowledge representation, reasoning, and future formalization.

0.39