CS Paper Radar

Capacity Planning for Resource-Constrained Clinical LLM Serving

Yi Tang, Geoffrey Martin, Yiye Zhang, Yifan Peng

cs.AI cs.PF ·submitted 2026-10-31 17:41 UTC · v1
published

Abstract

Deploying large language models (LLMs) under a fixed accelerator budget requires jointly deciding how computational capacity is allocated across model sizes and how incoming requests are routed across that capacity. Although prior work has extensively studied LLM routing and serving efficiency, the relative importance of fleet composition and routing under resource constraints remains less understood. We investigate this question using a controlled four-GPU serving environment with heterogeneous clinical NLP workloads spanning short factual verification, biomedical semantic matching, and long-context clinical summarization. We systematically vary fleet composition, routing policy, and offered load while holding the workload trace and hardware budget fixed. Across 24 configurations, descriptive main-effect shares attribute more variation to fleet composition than to the evaluated routing policies in time to first token, latency, and long-context coverage. All-small fleets provide the best responsiveness and throughput but substantially lower long-context coverage, whereas larger-model capacity improves coverage at the cost of serving efficiency. Heterogeneous fleets provide intermediate operating points but can introduce strong-model bottlenecks when large-model capacity is scarce. In a focused evaluation of this bottleneck, capacity-aware routing reduces mean latency and increases throughput while incurring a small reduction in long-context coverage. Within this measured regime, the results support prioritizing capacity allocation, with routing managing demand within the provisioned capacity.

Comment
Accepted to the 9th Special Session on Healthcare Data at the 2026 IEEE International Conference on Big Data (IEEE BigData 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Capacity over TFLOPS: Memory-Centric Deployment of Large Clinical Language Models on Consumer CPUs

cs.DC ·2026-10-13 ·Eli Yune, Umer Majeed, Mahesh Balan
publishedpositioncode/data similarity 0.72
Abstract · 6 pages, 4 figures. Accepted to the 2026 IEEE 15th International Conference on Consumer Electronics - Berlin (ICCE-Berlin). (c) 2026 IEEE. C…

The dominant barrier to running large clinical language models at the point of care is not arithmetic throughput but graphics memory: consumer GPUs cap at 4-16 GB, while the working set of a 27-billion-parameter model in 4-bit precision is 17-25 GB. We argue that the edge node should be treated as capacity-enabled (system RAM) rather than compute-limited (GPU VRAM), and we test this on commodity hardware. Using an INT4 build of a 27B open model as an architecture-faithful stand-in for a 27B medical model, we measure the memory footprint, inference latency, energy, and federated communication cost of a fully CPU-based pipeline driven by synthetic Fast Healthcare Interoperability Resources (FHIR) prompts. On two independent consumer machines (a desktop-class machine with 67 GB of RAM and a 6 GB GPU, and a mobile workstation with 34 GB of RAM and a 4 GB GPU) the model loads entirely into system RAM (37% and 60% utilization, respectively) while both GPUs are out-of-memory before the first step. Inference runs at overnight-batch speed (0.6-2.4 tokens/s for the 27B model), and federated fine-tuning would transmit only a 22.6 MB low-rank adapter, a 99.96% reduction over full weights. The capacity result is independent of CPU microarchitecture, RAM size, operating system, and GPU. We further identify an open, CPU- and NPU-optimized inference runtime as the natural production path for this approach, indicating a privacy-preserving and broadly deployable route for on-premises clinical AI. All data is synthetic; this is a research artifact and not a medical device.

0.50

Scaling LLM Inference via Parallelism: Throughput-Latency Trade-off

cs.DC cs.AIcs.LGcs.PF ·2026-10-14 ·Javad Mirzaei, Jeebak Mitra
similarity 0.69
Abstract · 15 pages, 7 figures

Large Language Model (LLM) serving systems must balance latency and throughput while efficiently utilizing distributed GPU resources. This challenge arises because inference consists of two fundamentally different phases: prefill, which determines time-to-first-token (TTFT), and decode, which determines inter-token latency (ITL). The use of tensor parallelism (TP), pipeline parallelism (PP), and hybrid configurations exposes different trade-offs between these latency dimensions, making the optimal parallelism configuration highly dependent on workload characteristics, latency requirements, and context length. Moreover, despite the widespread adoption of distributed inference, there is still limited understanding of how parallelism configurations should be selected under varying workload conditions and service-level objectives (SLO). In this paper, we develop a systematic framework for characterizing LLM inference parallelism via throughput-latency trade-offs, SLO-aware serving, and long-context scalability. We introduce the notion of parallelism operating regions by constructing TTFT-ITL feasible sets and Pareto frontiers across different workload compositions, thereby revealing a systematic transition from TP-dominant to PP-dominant configurations as workloads become increasingly prefill-heavy. We further formulate SLO-aware parallelism selection using goodput, showing that stringent TTFT requirements favor PP-dominated configurations, whereas relaxed latency constraints progressively shift the optimality toward TP-dominated configurations with higher serving capacity. Finally, we demonstrate that increasing context length fundamentally changes the relative advantages of parallelism configurations, with PP-dominant configurations exhibiting more favorable scalability and SLO attainment in the long-context regime.

0.19

OpScale: Operator-level Provisioning and Autoscaling for LLM Serving

cs.DC ·2026-08-13 ·Xingqi Cui, Chieh-Jan Mike Liang, Ziang Tang, Jiarong Xing, Haoran Qiu
similarity 0.66
Abstract · 22 pages, 29 figures

Achieving cost efficiency while meeting strict user-facing SLOs (e.g., time-to-first-token) remains a fundamental challenge for cloud GPU clusters serving large language models (LLMs). Autoscaling is the key mechanism for cluster resource management, yet a basic system design question is open for serving LLMs: what should be the unit of scaling? Existing approaches primarily treat the entire model as a monolithic scaling unit--simple but unable to capture the fine-grained dynamics of inference workloads. As a result, such coarse-grained scaling often leads to either SLO violations under bursty demand or significant GPU under-utilization. Our characterization reveals substantial operator heterogeneity, exposing operator-level elasticity as a viable scaling primitive. We present OpScale, a practical operator-level orchestration framework of profiling, provisioning, placement, and runtime serving. OpScale is designed to tackle the high complexity and the space explosion problem, arising from operating at this finer granularity. Evaluated with production traces on up to 40 A100s and 24 GB200s, OpScale attains SLOs with up to 36.3% fewer GPUs and 28% less power, or achieves 44% higher throughput under fixed cost budgets.

0.10

The Cost of Context: Profiling the Energy Footprint of Input Tokens in Large Language Models

cs.DC ·2026-10-14 ·Boris Ruf, Marcin Detyniecki
similarity 0.65
Abstract · Accepted at HotCarbon'26, the 5th Workshop on Sustainable Computer Systems; to appear in ACM SIGENERGY Energy Informatics Review, Vol. 6, Is…

The rapid adoption of Retrieval-Augmented Generation (RAG) and long-context LLMs has shifted the computational burden toward the prefill phase---the initial stage where the model processes all input tokens in parallel before generating a response---yet its energy impact remains poorly characterised. We investigate the contradiction between massive hardware-level power spikes and the sub-linear marginal cost of input tokens reported in system-level studies. Through high-resolution telemetry of Llama-3.1 and Qwen-2 models on NVIDIA A100 hardware, we identify the efficiency threshold where $O(n^2)$ attention complexity overcomes GPU parallelisation. Our results quantify how optimised memory orchestration (PagedAttention) delays this scaling bottleneck across three orders of context scaling, yielding up to an 8.9$\times$ energy efficiency advantage at 112,000 tokens compared to standard baselines. Furthermore, we characterise the energy disparity between input and output tokens, demonstrating that optimised serving (vLLM) causes this ratio to narrow (from $\approx$850$\times$ to 750$\times$) as context scales due to high decode efficiency, whereas unoptimised baselines show a much smaller, roughly constant gap ($\approx$150--230$\times$) because their prefill is itself expensive. This work establishes context-scaling laws that differentiate engine-level optimisations from inherent model constraints, providing an empirical framework for sustainable LLM deployment.

0.47

Large Language Models for AI Infrastructure

cs.AI cs.CL ·2026-11-14 ·Bolin Shen, Shaoyi Huang, Yushun Dong
survey similarity 0.64
Abstract

Large language models (LLMs) are increasingly used to design, optimize, and operate the infrastructure behind AI training and serving, yet the literature remains fragmented across hardware design, machine learning systems, electronic design automation, and high-performance computing. We present a comprehensive survey of LLM-assisted AI infrastructure across its lifecycle, from accelerator design and kernel engineering to compilation, deployment, operations, data management, and energy optimization. We organize the literature by the primary resource the LLM manages: artifact-centric methods for computational artifacts, operational-centric methods for deployment context and system state, and resource-centric methods for data and energy. These categories span the lifecycle and cover AI-specific concerns such as distributed-training configuration, inference serving, GPU-cluster scheduling, and data loading. Building on this taxonomy, we conduct a cross-study quantitative synthesis of reported results. Because studies adopt heterogeneous benchmarks, baselines, hardware, and metrics, we compare methods only where evaluation conditions permit and align results along common dimensions: functional correctness, execution performance, throughput, resource and energy consumption, operational outcomes, and optimization cost, keeping each result's native metric, baseline, and setting rather than collapsing them into a single score. This comparison reveals where LLM-driven methods yield consistent gains, how reported gains in workload orchestration depend on the evaluation environment, from simulators to real clusters and production, and where evidence is still lacking. Together, the taxonomy, lifecycle perspective, and quantitative evaluation provide an evidence-grounded reference for LLM-driven engineering of AI infrastructure.

0.19

Simulate Before You Scale: High-Fidelity LLM Inference Planning Without GPUs

cs.PF ·2026-10-09 ·Dipanwita Guhathakurta, Mert Toslali, Srinivasan Parthasarathy, Jing Chen, Michael Kalantar +4 more
top venuecode/data similarity 0.64
Abstract · This paper is accepted at ACM SIGMETRICS 2027

Deploying large language model (LLM) inference at scale requires jointly selecting hardware layout, parallelism strategy, scheduling policy, admission control, and request routing to meet latency and throughput targets. These choices interact: a routing decision that improves cache locality can concentrate load, and an admission threshold that triggers only at saturation allows queues to grow deep enough to degrade critical-tier traffic. Evaluating candidates on GPU clusters is too expensive for iterative exploration, yet existing predictive tools either ignore batching and queueing dynamics or model only fragments of the pipeline. In this paper, we present BLIS, a deterministic, CPU-only discrete-event simulator that models the full inference serving pipeline (admission, routing, scheduling, prefill/decode execution, KV-cache management, and preemption). BLIS pairs analytical basis functions with learned scaling coefficients and overhead terms, fit once globally, to predict step latency without per-model or per-GPU profiling. Across 36 experiments spanning six models and three GPU types, BLIS achieves 6.7% median end-to-end error while running around 200 times faster than real execution. In a configuration search over 420 serving configurations for Llama-2-70B, BLIS identifies a 4-GPU deployment that meets a 300ms mean TTFT service-level objective (SLO), whereas competing tools either require double the GPUs or recommend configurations that fail under load. Two policies evolved entirely in simulation were validated on real hardware and merged into llm-d, a widely adopted open-source platform for distributed LLM serving: an admission policy that reduces critical-tier TTFT P90 by up to 82%, and a flow-control policy that reduces E2E P50 latency by 32-48% on overloaded workloads.

0.40

PackServe: SLO-Aware Request Scheduling for Agentic LLM Serving at Scale

cs.DC ·2026-09-27 ·Zhiyuan Tan, Dejiang Zhu, Jingzhe Jiang, Yihao Zheng, Yang Tian +2 more
similarity 0.64
Abstract · 13 pages, 13 figures

Request scheduling is a key challenge in large-scale clusters serving agentic large language model (LLM) workloads. An effective scheduler must preserve key-value cache (KVC) reuse across long, shared prefixes, meet token-level latency service-level objectives (SLOs), and minimize GPU resource footprint. Existing schedulers struggle to reconcile these requirements: request consolidation can sacrifice cache locality and increase prefill/decode interference, compromising both SLO attainment and resource efficiency. We present PackServe, a scheduler designed to reduce resource costs while meeting latency SLOs for agentic LLM serving. PackServe uses compact white-box models to predict latency under prefill/decode interference. Guided by these predictions, it packs requests onto fewer serving instances while preserving KVC reuse and SLO constraints, trading available latency headroom for improved per-instance throughput. Evaluation on 64 NVIDIA H20 GPUs shows that PackServe uses up to 16.8% and 24.6% fewer GPU-hours than state-of-the-art schedulers under 30-ms and 50-ms TPOT targets, respectively, while meeting the target TPOT objectives. PackServe has also been deployed in our production cluster comprising over 1000 GPUs, where it reduces the resource footprint by 34.7% compared with the original production scheduler.

0.21

GAUSS: A Workload-Aware Analytical and Monte-Carlo Simulator for LLM Inference Serving

cs.AI ·2026-10-27 ·Srikant Bharadwaj, Ankur Mallick, Spyridon Mastorakis, Anjaly Parayil, Dhruv Deshmukh +1 more
hot direction similarity 0.64
Abstract

Large language model (LLM) inference has become an operational workload that fleets must provision, monitor, and bill against latency service-level objectives (SLOs). A single throughput number cannot answer the questions operators actually face, because generative serving couples two phases with very different service characteristics, continuous batching reshapes the effective service process, and user-visible tail latency can degrade long before aggregate throughput saturates. We present GAUSS, a workload-aware analytical and Monte-Carlo simulator that predicts the full distributions of time-to-first-token (TTFT) and time-between-tokens (TBT), together with the sustainable request rate, for a given workload, engine, and accelerator. GAUSS pairs calibrated, phase-specific latency surfaces for prefill and decode with a Lindley-recurrence model of queueing under stochastic arrivals and estimates performance by ensemble Monte-Carlo sampling rather than by replaying a single trace. This lets GAUSS reason about workloads, routing policies, and hardware that have never been deployed, and to capture the latency tails that trace-driven simulators systematically under-sample. We describe the model and show how it supports operating-point selection, traffic segmentation, and shortest-remaining-processing-time scheduling capacity questions that trace-driven simulators cannot address.

0.26