CS Paper Radar

A Domain Driven Design Based Reference Architecture for IoT Systems Engineering

Yousef Abuseta

cs.SE ·submitted 2026-10-31 18:52 UTC · v1
published

Abstract

The Internet of Things (IoT) paradigm continues to gain significant traction across diverse do-mains, primarily driven by its transformative and socio-economic benefits. However, engineering robust IoT systems remains a formidable challenge, largely due to the inherent dynamism, volatility, and uncertainty of their operational environments. To mitigate this architectural complexity, microservices have emerged as a viable alternative to traditional, rigid monolithic frameworks, offering a scalable mechanism to fulfill critical quality attributes. To maximize the efficacy of a microservices architecture, its technical boundaries must align precisely with domain-specific business requirements. Domain-Driven Design (DDD) addresses this need by strategically decomposing complex domains into modular, highly manageable subdomains that map directly to individual microservices. Furthermore, to minimize architectural coupling, enhance system integrability, and optimize device energy efficiency, Event-Driven Architecture (EDA) serves as a critical operational enabler. This paper proposes a comprehensive reference architecture for IoT systems engineering, systematically leveraging DDD and EDA principles to harmonize business logic with decoupled, event-driven microservices.

Comment
19 pages, 9 figures
Journal ref
Vol. 3 No. 01 (2026)
DOI
10.5281/zenodo.23127749

Closest papers

Nearest neighbours by meaning across the whole index.

Emergent Behavior and Uncertainty in IoT-Enhanced Business Processes: Challenges and Future Directions

cs.ET cs.SE ·2026-08-28 ·Marco Pegoraro, Sara Pettinari, Ivan Compagnucci, Marco Franceschetti, Ronny Seiger
similarity 0.65
Abstract · 14 pages, 1 figure, 55 references

IoT-enhanced business processes are characterized by high complexity due to heterogeneous actors, varying levels of autonomy among participating systems, continuously evolving execution contexts spanning the digital and physical worlds, and continuous event streams. In such settings, process behavior partially emerges only at runtime through complex interactions involving humans, IoT devices, physical objects, software systems, agents, and services. This complexity introduces partial observability, uncertainty, and runtime dynamics that are difficult to anticipate and that challenge traditional business process management (BPM) assumptions and systems. We discuss these challenges from three perspectives, addressing 1) uncertainty representation, 2) operationalization of IoT-enhanced processes, and 3) runtime management of emergent behavior. Based on a motivating scenario and an analysis of the state of the art, we identify open research gaps and outline short-, medium-, and long-term recommendations to shape a research agenda on emergent behavior in IoT-enhanced business processes.

0.30

Small Language Models for Smart Data Model Classification at the Edge: A Cost-Aware Hybrid Approach

cs.AI ·2026-10-05 ·Cristian Martella, Angelo Martella, Antonella Longo, Motaz Saad
code/datahot direction similarity 0.57
Abstract

The rapid proliferation of heterogeneous data sources within the Internet of Things (IoT) across domains such as smart cities, energy management, and environmental monitoring necessitates efficient and scalable data standardization methods. Effective classification of smart data models (SDMs) is essential for facilitating interoperability. However, existing approaches are often limited by high resource consumption and lack applicability in edge environments with constrained computational capabilities. Aiming to bridge this gap, the proposed study evaluates the performance of lightweight open-source language models (LMs) to resolve an input data entity against its corresponding best fitting SDM representation under resource-constrained conditions. It systematically benchmarks a diverse array of models, including general purpose (GP), reasoning-specialized (RS), and code-specialized (CS) architectures, across multiple domain-specific datasets. Addressing the current omission of lightweight, resource-efficient solutions in the literature, the investigation provides significant and valuable insights into model selection, task formulation, and deployment strategies that optimize accuracy and efficiency. A complementary experiment also compares the surveyed large language models (LLMs) against two near-zero-cost similarity baselines (Term Frequency-Inverse Document Frequency (TF-IDF) and a lightweight sentence encoder) on the same task, providing a strong reference point for interpreting the practical value of LLM-based classification on edge platforms.

0.41

AI-Native Orchestration in the 6G Continuum: Evolving Operator Platforms with Agentic AI

cs.NI ·2026-09-08 ·Claudia Carballo González, Hatim Chergui, Sergio Giménez-Antón, Mohammadreza Mosahebfard, Juan Sebastián Camargo +3 more
code/data similarity 0.55
Abstract · 8 pages, 6 figures

As Sixth-Generation (6G) networks evolve towards a seamless Cloud-Edge-Internet of Things (IoT) continuum, autonomous orchestration across distributed compute and network domains becomes critical. Future 6G services will span multiple administrative and operator domains, making federation essential for ubiquitous, ultra-low-latency service continuity beyond individual footprints. This complexity demands AI-native mechanisms supporting intent-driven automation and closed-loop management. While the GSMA Operator Platform (OP) provides the architectural blueprint for multi-operator federation and network capability exposure, and the ETSI Software Development Group OpenOP (SDG OOP) offers a primary open-source reference implementation, current frameworks are limited by stateless API interactions and lack native intelligence. This paper proposes an Agentic-driven Intelligence extension for the GSMA OP architecture, using the OOP as the reference framework. We introduce an AI-native orchestration layer where autonomous agents manage persistent service contexts and enable closed-loop control via CAMARA APIs. By integrating a Declarative Monitoring and Alerting System (DeMAS) into the OOP stack and establishing a decentralised agent negotiation protocol, the proposed architecture enables real-time, intent-driven resource optimisation and autonomous cross-domain conflict resolution across federated domains. We validate our approach through a representative 6G use case involving Ultra-Reliable Low-Latency Communication (URLLC) and enhanced Mobile Broadband (eMBB) coexistence, demonstrating that an agentic OP framework autonomously reconciles stringent Service Level Agreements (SLAs) while enhancing infrastructure energy efficiency. Our findings establish a scalable blueprint for cross-domain Network-as-a-Service (NaaS) models that align standardised exposure with 6G autonomous requirements.

0.38

When Do Microservices Save Energy? Evidence from Environmental Simulation Workflows

cs.DC cs.SE ·2026-08-18 ·Joshua Rowley, Abdessalam Elhabbash
similarity 0.55
Abstract · 5 pages, 7 figures. Accepted at the 2nd International Workshop on Low Carbon Computing (LOCO 2026), Lancaster University, United Kingdom, 10…

Environmental simulation models support scenario analysis, calibration, and decision-making, but repeated execution can incur significant energy costs. Microservices offer modularity and scalability, yet their low-carbon impact remains unclear because decomposition introduces orchestration, communication, persistence, and idle-service overheads. This paper evaluates four environmental models as containerised microservice workflows, comparing monolithic execution with polling-based and event-driven orchestration. Results show that microservices increase energy consumption for smaller or tightly coupled models, where coordination overhead dominates. For a larger workflow, event-driven orchestration reduces energy use despite longer runtime, while selective downstream re-execution achieves a 41% reduction during repeated parameter exploration.

0.33

LEMONS: Leveraging Model-Based Techniques to Enable Non-Intrusive Semantic Enrichment in Wireless Sensor Networks

cs.NI ·2026-08-25 ·Jan Novacek, Arthur Kühlwein, Sebastian Reiter, Alexander Viehl, Oliver Bringmann +1 more
published similarity 0.54
Abstract · Published in: 2020 46th Euromicro Conference on Software Engineering and Advanced Applications (SEAA)

The paper presents an efficient approach to the semantic enrichment of measured sensor data in Wireless Sensor Networks (WSNs), by bridging techniques from Model-driven Software Development (MDSD) and Semantic Web Technology (SWT). Our approach reinforces data interoperability, fostering data sharing and reuse, by utilizing SWT. Model-based and type-agnostic configuration reduces the overall effort for WSN setup and maintenance, which are traditionally complex and time-consuming tasks. The presented approach addresses the problem of large-scale WSN management through the application of SWT in WSN configuration and management without requiring expert knowledge. Additionally, we present a generic architecture and an implementation which is also supplemented by hands-on descriptions of an illustrative use case. Our experimental results demonstrate that our model-based approach provides non-intrusive semantic enrichment with sub-millisecond computational overhead, as well as partially automated configuration of WSNs.

0.67

SafeOrchestrate: Runtime Checked Intent-Driven Orchestration for Cyber-Physical Systems

cs.AI ·2026-11-06 ·Muhammad Ashfaq, Ahmed R. Sadik, Ewan Warburton, Pyry Kotilainen, Niko Mäkitalo +1 more
similarity 0.53
Abstract

Modern cyber physical systems (CPS) integrate heterogeneous sensors, actuators, controllers, and services, composed at runtime rather than at design time. Orchestrating such systems through natural language (NL) is attractive, but unconstrained large language model (LLM) tool use is risky because actions must respect device capabilities, runtime state, and safety constraints. We present Safe Orchestrate, a reference architecture for runtime checked, intent driven CPS orchestration. Given an NL intent, it derives atomic goals, generates a runtime checkable specification for each, grounds the specifications to device affordances, and verifies every candidate action against runtime state and safety constraints before execution. In a Web of Things (WoT) instantiation, the architecture produces Linear Temporal Logic (LTL) style specifications from the NL intent, grounds them to Thing Description (TD) affordances exposed through the Model Context Protocol (MCP), and checks candidate actions against satisfiability modulo theories (SMT) backed guardrails. We evaluate this instantiation on simulated smart home, greenhouse, and industrial automation tasks against a direct LLM to MCP baseline. Safe Orchestrate maintains 100% required action accuracy on every task and 100% MCP Execution Similarity (MCP ES) on all but one, where MCP ES is 92%. By contrast, the baseline degrades on multi device, event triggered, and ordered tasks, with MCP ES falling to 13%. These results suggest that combining LLM based specification generation with role aware grounding and runtime constraint checking improves reliability for open CPS orchestration without enriched TD annotations or planning domain expertise.

0.06

EdgeCraft: Automated Model Crafting for Edge IoT

cs.LG cs.DC ·2026-09-28 ·Genglin Wang, Kaiwei Liu, Liekang Zeng, Wangsong Yin, Shangcheng Jin +2 more
similarity 0.52
Abstract · 20 pages, 15 figures, 5 tables

Machine learning (ML) increasingly powers Internet of Things (IoT) applications at the edge. Yet producing a deployable edge ML artifact for a specific scenario requires navigating a huge search space spanning data representation, model design, training on domain-specific data, and runtime customization. This workflow is fragmented and difficult to scale across diverse edge applications. We present EdgeCraft, an LLM-driven system that turns high-level intent into deployable edge ML artifacts. Building such a system raises two challenges: (1) How can an LLM be guided to find high-quality solutions that meet dynamic SLOs for task quality, latency, and energy? (2) How can trustworthy target-device verification be obtained at low cost? EdgeCraft addresses these challenges with two designs. (1) A constraint-aware synthesis tree explores alternative candidates and uses measured SLO gaps to guide each improvement. (2) A multi-fidelity verifier progressively combines low-cost checks with full target-device verification to reduce verification cost while preserving reliable verification results. It also records verified failures for reuse, avoiding repeated device work. To support concurrency, EdgeCraft provides a multi-tenant runtime that runs cloud training and target-device verification in parallel while isolating requests. Across 50 public tasks, EdgeCraft exceeds the task-specific Reference in best-observed quality on 40 tasks and finds an SLO-feasible artifact on 45, with the two outcomes overlapping on 38 tasks. Moreover, EdgeCraft achieves competitive performance on our self-collected SEN dataset, suggesting its generalizability to real-world IoT sensing tasks.

0.18

A Unified XAI-NSAI Analytical Framework for Trustworthy IoT Anomaly Detection

cs.LG ·2026-10-30 ·Hugues Leger, Giovani R. Abuaitah
top venueposition similarity 0.52
Abstract · 8 pages, 3 figures, accepted for publication in the Proceedings of the IEEE Annual Congress on Artificial Intelligence of Things (AIoT), 202…

The widespread deployment of Internet of Things (IoT) devices in critical environments makes anomaly detection essential for identifying abnormal behaviors and supporting timely investigation and response. However, accurate detection alone is insufficient. Practical IoT deployments must also provide explanations, incorporate domain knowledge and reasoning, operate under IoT constraints, and support human decision making. Although recently proposed approaches increasingly incorporate Explainable Artificial Intelligence (XAI) or Neuro-Symbolic Artificial Intelligence (NSAI), XAI and NSAI methods are often considered independently. We argue that they should be considered together to better understand their complementary roles in supporting trustworthy IoT anomaly detection. To address this gap, we propose a unified analytical framework organized around five complementary dimensions. The framework provides a structured basis for characterizing existing approaches, identifying capability gaps and design trade-offs, and guiding the design of new anomaly detection systems for different IoT applications. We demonstrate the framework's analytical utility by applying it to three representative studies and illustrate its design utility through its application to a Medical IoT anomaly detection system.

0.47