CS Paper Radar

Trajectory Design and User Scheduling for Pinching-Antenna Systems

Kaidi Wang, Daniel K. C. So, Zhiguo Ding

eess.SP ·submitted 2026-10-31 22:48 UTC · v1
theory

Abstract

Finite antenna movement speed introduces repositioning delays that can limit the performance gains of pinching-antenna systems. In this paper, a trajectory based scheme is proposed for a time division multiple access (TDMA) based pinching-antenna system, allowing transmission during both movement and stationary operation. A discrete-time model is developed to characterize periodic antenna trajectories and antenna-user service association under practical movement constraints. For a single-waveguide scenario, the expected average achievable rate is derived. The rate loss relative to instantaneous positioning and the rate improvement over a fixed antenna are further analyzed, with an upper bound on the former and a lower bound on the latter established. To improve fairness among users, a minimum average rate maximization problem is formulated through joint trajectory design and user scheduling. To address the coupling between these variables, an alternating optimization (AO) framework is adopted. Specifically, a successive convex approximation (SCA) based algorithm is developed using concave rate lower bounds, while a game based scheduling algorithm employs an ordered user-rate vector as the common utility. The convergence of the SCA objective value and the finite termination and stability of the scheduling algorithm are established. Simulation results demonstrate the gains achieved by the joint design and show that the proposed system can approach instantaneous-positioning performance under finite antenna movement speed.

Closest papers

Nearest neighbours by meaning across the whole index.

Pinching-Antenna Systems: From Antenna Placement to Antenna Roaming

eess.SP ·2026-08-10 ·Kaidi Wang, Daniel K. C. So, Zhiguo Ding
similarity 0.79
Abstract

This paper investigates pinching-antenna systems with finite antenna movement speed, under which conventional antenna placement is subject to non-negligible repositioning delay, resulting in a fundamental tradeoff between channel quality and effective transmission time. In this context, antenna roaming is proposed as a novel operation mode, in which the antenna moves continuously along the waveguide while simultaneously serving users. By incorporating communication and antenna movement into the same transmission cycle, a unified cycle-duration framework is established to facilitate a fair comparison between antenna placement and antenna roaming. The sum-rate difference is then analytically derived, indicating that antenna roaming avoids dedicated positioning overhead with a loss in channel quality due to spatial averaging. The corresponding sum rate maximization problems are formulated for the two operation modes. The continuous optimization problems are transformed into finite-state sequential decision problems and solved via dynamic programming (DP) based algorithms. For antenna roaming, the optimal unconstrained service-interval partition is analytically characterized, with each antenna position assigned to the user achieving the highest instantaneous rate. Simulation results validate the theoretical analysis, demonstrate the performance advantage of antenna roaming over antenna placement, especially when positioning overhead is significant, and confirm the effectiveness of the DP based solutions in improving the achievable sum rate.

0.41

Pinching-Antenna System With Movable Waveguides: Modeling and Optimization

eess.SP cs.IT ·2026-09-15 ·Jingze Ding, Zijian Zhou, Bingli Jiao, Rui Zhang
top venuetheoryhighly cited similarity 0.68
Abstract · This paper has been accepted for publication in IEEE Transactions on Wireless Communications

This paper proposes a movable waveguide (MW)-enabled pinching-antenna system (PASS), in which each waveguide is connected via a flexible cable and can be linearly moved by drivers. By simultaneously moving the MWs and the pinching antennas (PAs) on them, MW-enabled PASS can effectively track user locations and form flexible array geometries for efficient beamforming. We first examine the special case with a single user and derive the closed-form solutions for the optimal MW positions as well as an upper bound on the user rate. Furthermore, we develop a two-step optimization algorithm to maximize the achievable rate for the user, where the first step determines the optimal MW positions using the derived closed-form solutions, and the second step alternately optimizes the PA positions through a one-dimensional (1D) local search based on the user location. Then, for the general multi-user scenario, we derive the upper bounds on the minimum rate among all users. To maximize their minimum rate, we propose a low-complexity two-scale optimization algorithm, where the large-scale global search coarsely determines the MW and PA positions, followed by a small-scale local search to finely tune them. In addition, a two-timescale optimization scheme based on statistical channel information is investigated to reduce the mechanical movement overhead of the MWs. Simulation results demonstrate that the proposed scheme achieves performance close to the derived bounds. It also flexibly adapts to different user distributions compared with the conventional PASS employing dense or sparse fixed-position waveguides (FPWs), as well as fixed-position antenna (FPA) schemes.

0.70

Two-Timescale Antenna Positioning for Pinching-Antenna System Based on Statistical Channel Information

cs.IT ·2026-10-22 ·Jingze Ding, Zijian Zhou, Bingli Jiao, Rui Zhang
top venuetheory similarity 0.66
Abstract · This paper has been accepted by IEEE Transactions on Communications

This paper introduces a two-timescale antenna position optimization framework for the pinching-antenna system (PASS). The proposed framework exploits statistical channel state information (CSI) to determine large-timescale pinching-antenna (PA) positions over the entire waveguide, and utilizes instantaneous CSI to refine PA positions at the small timescale within a local region. This approach effectively captures the benefits of large-timescale PA positioning for long-term system performance and small-timescale PA movement for real-time adaptation to fast channel fluctuations. For the single-user case, we derive closed-form solutions for the optimal large-timescale PA positions, and further analyze a performance upper bound together with the conditions for achieving this bound, which guide the small-timescale position refinement. For the multi-user case, an upper bound on the minimum rate among all users is derived. To maximize their minimum rate, we develop an element-wise search algorithm for large-timescale PA positioning and a projected gradient ascent method for small-timescale position refinement. Simulation results show that the proposed scheme closely approaches the derived bounds and consistently outperforms conventional schemes by reducing path loss via large-timescale PA positioning and suppressing inter-user interference through small-timescale local movement.

0.39

Spatial Reuse in Multi-Cell Pinching-Antenna Systems

eess.SP ·2026-11-05 ·Zhenqiao Cheng, Chongjun Ouyang, Zhiguo Ding
similarity 0.64
Abstract · 13 pages

In this paper, spatial reuse in a multi-cell pinching-antenna system (PASS) is investigated, where each cell employs a dielectric waveguide with one activated pinching antenna (PA) to serve a single user. Spatial reuse refers to the simultaneous use of the same time-frequency resource block (RB) by multiple spatially separated cells. Due to inter-cell interference (ICI), simultaneous transmission by all cells on the same RB may be infeasible, and multiple RBs may be required to serve all users. The spatial-reuse capability is thus characterized by the minimum number of RBs required to satisfy all users' signal-to-interference-plus-noise ratio (SINR) targets under per-cell power budgets. Flexible PA placement can enhance the desired-link gain of each user and reduce the required transmit power of its serving cell, which in turn mitigates ICI and allows more cells to share the same RB. To exploit these benefits, a joint optimization problem of RB allocation, PA placement, and power control is formulated. For the two-cell case, the globally optimal PA placement is determined by minimizing the peak transmit power required by the two cells. A one-dimensional special case is further analyzed to derive analytical expressions for the average RB requirement and its scaling laws with respect to cell length under different PA-placement strategies. For the general multi-cell case, the optimal two-cell solution is exploited to construct a weighted compatibility graph, whose edge weights represent the minimum peak transmit powers required for feasible pairwise RB reuse. Based on this graph, a greedy RB allocation algorithm with minimum-weight pair initialization and element-wise PA-placement optimization is developed. Numerical results validate the analytical findings and demonstrate that PASS significantly reduces the required RBs compared with conventional fixed-antenna systems.

0.30

Joint Design of Communication and Control in Center-Fed Pinching-Antenna Systems

cs.IT ·2026-11-08 ·Xu Gan, Yuanwei Liu, Hyundong Shin
similarity 0.64
Abstract

An analytical and optimization framework for the joint design of communication and control (JDCC) in a center-fed pinching-antenna system (C-PASS) is proposed. Within this framework, the mathematical coupling between data throughput and closed-loop control cost is characterized for JDCC. The analysis captures the mutual interference between concurrently transmitted data and control streams during uplink state uploading and downlink command delivery. Based on this coupling, an achievable communication-control performance region is established for C-PASS. Accordingly, a throughput maximization problem is formulated to jointly optimize digital and pinching beamforming subject to control-cost constraints. To address this problem, an alternating optimization algorithm is developed based on constraint reformulation and resource decomposition. The proposed framework reveals how control requirements shape achievable data throughput, guiding the joint beamforming design. Numerical results demonstrate that 1) the proposed C-PASS design achieves 110.2\% higher frame-average throughput than conventional PASS, and 2) the proposed concurrent data-control transmission protocol increases frame-average throughput by up to 66.7\% over separated transmission.

0.26

Discrete Coupling and Localized Motion for Pinching-Antenna Systems (PASS)

eess.SP ·2026-09-14 ·Jie Jiang, Xiaoxia Xu, Chan-Tong Lam, Yuanwei Liu, Arumugam Nallanathan
similarity 0.62
Abstract

The practical implementation of pinching-antenna systems (PASS) is challenging due to hardware limitations in large-scale antenna movement and continuous radiation power adjustment. This paper proposes a practical PASS-enabled downlink multi-user multiple-input multiple-output communication framework that enables discrete radiation power control and localized discrete antenna movement. Specifically, a discrete coupling strength model is exploited to tune the radiation power at each pinching antenna (PA) through quantized coupling spacing levels. Moreover, each PA can only move among discrete locations within a limited region determined by the movement speed and duration. Based on the proposed framework, a joint optimization problem of the PA positions, coupling strength, and transmit beamforming is formulated. Considering waveguide attenuation, the total average power consumption is minimized, subject to each user's minimum SINR requirement and localized motion constraints. To address this coupled mixed-integer nonconvex optimization problem, a globally optimal branch-and-bound-based algorithm is first developed for the multi-waveguide single-user scenario. To further reduce complexity, a scalable genetic algorithm-assisted particle swarm optimization (GA-PSO) method is developed for the multi-waveguide multi-user scenario, where GA operations are incorporated to preserve population diversity and alleviate premature convergence. Simulation results demonstrate that the proposed design significantly reduces the power consumption compared with the conventional PASS schemes and MIMO architectures.

0.35

Dynamic Metasurface-Enabled Generalized Pinching-Antenna Systems

eess.SP ·2026-10-25 ·Shan Shan, Chongjun Ouyang, Yufei Zhao, Zhiguo Ding, Yong Liang Guan
theoryhot direction similarity 0.62
Abstract

This article investigates dynamic metasurfaces as an electronic realization of generalized pinching antennas (GPA). By jointly optimizing the locations and radiation coefficients of activated elements, the dynamic metasurface-enabled GPA (DM-GPA) architecture exploits additional design flexibility to enhance spatial reconfigurability beyond that attainable through antenna placement in the conventional pinching-antenna system (PASS). Based on this architecture, we study weighted sum rate (WSR) maximization for multiuser downlink transmission. 1) For two-user transmission, the sum-rate improvement of DM-GPA over conventional PASS is quantified through a lower bound that reveals when the benefit of channel orthogonalization achieved by adjusting the radiation coefficients outweighs the channel power loss caused by the Lorentzian constraint. Furthermore, when conventional PASS yields a rank-deficient channel, DM-GPA is shown to achieve spatial multiplexing and transmit diversity, with a strict sum-rate advantage at sufficiently high signal-to-noise ratios. 2) For general multiuser transmission, a weighted minimum mean-square error (WMMSE)-based alternating optimization algorithm is developed for joint pinching beamforming and digital precoder design. A sequential element-wise search is developed to optimize the locations of the activated elements, with a closed-form solution for the radiation coefficient at each candidate location. Numerical results are provided to demonstrate that: (i) DM-GPA achieves higher WSR than other PASS architectures and fixed-array benchmarks, (ii) increasing the number of activated elements further improves the WSR of DM-GPA, and (iii) radiation coefficient adjustment is particularly beneficial when candidate activation locations are limited.

0.27

Frequency-Selective Pinching-Antenna Systems

eess.SP ·2026-08-21 ·Chongjun Ouyang, Hao Jiang, Zhiguo Ding, Robert Schober
theory similarity 0.62
Abstract · 34 pages

An uplink pinching-antenna system (PASS) is considered, where a segmented dielectric waveguide is employed to serve multiple users and one pinching antenna (PA) is activated on each segment. Extensive waveguide deployment reduces user-to-PA path loss but also creates differential propagation delays among the PA-assisted paths spanning the large waveguide aperture. These delays are retained, and a Toeplitz block model is derived to characterize the resulting frequency-selective (FS) channel. For infinite-blocklength transmission, the achievable single-user rate and the multiuser sum-rates under joint and parallel decoding are characterized. For carrier-phase-aligned single-user PA placement, the frequency-flat (FF) model is shown to overestimate the exact FS rate. The difference between the rates computed under the FF channel model and the exact FS channel model is referred to as the FF rate overestimation, and its dependence on the waveguide-aperture-induced delay spread is characterized. For small delay spreads, the FF rate overestimation is shown to increase approximately quadratically with the delay spread, whereas a derived lower bound reveals that the overestimation grows at least double logarithmically with the waveguide aperture, or equivalently with the delay spread, in the large-aperture regime. For finite-blocklength transmission, achievable rates are derived under a practical cyclic-prefix single-carrier frequency-domain equalization framework. An element-wise algorithm is developed to optimize FS-aware PA placement in both transmission regimes. The analytical findings demonstrate that differential delays across the extensively deployed waveguide can cause significant frequency selectivity and that the proposed FS-aware PA placement method substantially improves the achievable rate over placement based on the FF approximation, especially for large bandwidths and apertures.

0.20