CS Paper Radar

Seeing Why: Exact Evidence Maps for Quantum and Optical Image Classifiers

Teerawat Tongloy, Rangsan Jomtarak

cs.LG quant-phphysics.optics ·submitted 2026-11-01 15:27 UTC · v3
code/dataunusual

Abstract

When an image classifier decides, we can usually only estimate why. For quantum and all-optical classifiers that act linearly on amplitude-encoded pictures up to the measurement, with no trained classical network before or after them, each class's Born probability above its no-information share, $P_g - b_g$, splits exactly into contributions of the encoded amplitudes, shown as Born evidence maps (BEM). The split itself follows from known results on quadratic forms: with the transmitted light held fixed, it is what Integrated Gradients from a zero baseline and the Shapley value give. What we add is a way to measure it on the hardware that classifies, from class probabilities on a quantum chip or, in simulation, from camera frames on a lens bench, with no gradient circuit and no light sent backwards; a $g\times g$ map takes $1 + 2g^2$ runs. Deleting the 5% of pixels with the highest evidence drops accuracy from 73% to 9% (one seed), as occlusion and gradient $\times$ input do, while plain gradients remove much less. The classifiers share one architecture, a Fourier-plane mask followed by a brickwall circuit on qubits or by phase plates on a lens bench, read by a fixed Born headroom readout with no trained parameter; centring each picture on its own mean lets dark features count as much as bright ones. In simulation, four phase plates at one wavelength reach 72.3% on Caltech-10 colour photographs. On IBM's ibm_kingston, with the mask computed classically before approximate loading, 300 test pictures were classified at 37.7% against 10% chance (56.3% in exact simulation), and $2\times2$ maps of the filtered input of 30 test pictures drawn at random in advance, measured on the chip, agreed with the exact ones ($r = 0.88$; standard estimator 0.82). The maps also revealed a shortcut in the data; as the trim that removed it was chosen on test pictures, the Caltech-10 results are exploratory.

Comment
38 pages, 13 figures, 16 tables. Code, models and IBM job records: https://github.com/stein-research/seeing-why (v1.2, doi:10.5281/zenodo.23984169). v3: chip maps of 30 pictures drawn at random in advance (r = 0.88); a second model, with no mask, on the chip; reviewer checks (nulls, model randomisation, ROAR, calibration), most in a new appendix; corrections (loading circuit 44 CNOTs)

Closest papers

Nearest neighbours by meaning across the whole index.

Reading Why: Born-Measured Attention with Exact Word Evidence on Light and Qubits

cs.CL quant-phcs.LGphysics.optics ·2026-11-03 ·Teerawat Tongloy, Jiraporn Pongsopa, Rangsan Jomtarak
code/data similarity 0.62
Abstract · 32 pages, 9 figures, 12 tables. v3: the Born Transformer's attention is now |<q|k>|^2 over its row sum (the fourth power of v1-v2 is an abla…

When a language model answers, we can usually only estimate why. We build a transformer in which every nonlinearity is a quadratic detection (an interference, a balanced interferometric reading or a camera) and the output is a Born probability: attention $|\langle q|k\rangle|^2$, the form of the Born rule, normalised over each row, a measured product in place of the feed-forward nonlinearity, and a Born readout; between detections a classical controller squares, divides, rescales and re-encodes. With its denominators held at their values for the input, each class probability is a polynomial in the word amplitudes, so its integrated-gradient evidence is computed by a finite quadrature with no quadrature error: the words' contributions sum to the class probability above its no-information share, to $10^{-13}$ or better. On e-SNLI natural language inference the model reaches 77.45 +- 0.91 % test accuracy, level within the spread of three seeds with a softmax transformer of the same size (76.62 +- 0.36 %). Deleting the word its evidence ranks first changes the answer in 44 % of test pairs, out of the 53 % any single deletion can change, against 32 % for the softmax model's integrated gradients and 31 % for the Born Transformer's own attention. The same weights compile exactly to optoelectronic optics (simulated), and its attention overlaps to Hadamard tests on qubits; a separate coherent attention layer becomes one post-selected circuit (852 CNOTs on 23 qubits). On IBM's ibm_kingston, reading only the attention overlaps, the device gave the model's answers on the two shortest test pairs, also when the one word that decides one of them was deleted; with calibration circuits as deep as the overlaps, each word's evidence with the device's attention row sums followed the exact evidence on one pair (correlation 0.997) and on the other less closely (0.962).

0.39

Hybrid Quantum--Classical Pauli-Correlator Architecture for Image Reconstruction

cs.CV quant-ph ·2026-11-03 ·Sparsho Chakraborty, Siddhartha Patra
similarity 0.55
Abstract · 30 pages , 6 figures

We introduce the Pauli-Correlator Autoencoder (PCAE), a hybrid quantum--classical architecture for image reconstruction. PCAE splits an image into patches and compresses each patch as a matrix product state (MPS). A small quantum circuit turns each compressed patch into a few measured numbers, and a classical neural network rebuilds the patch from these numbers and the patch position. A learnable energy term, taken from physics, is added to training and tracked as training proceeds. Two versions place the six qubits on a line (PCAE1D) or on a grid (PCAE2D). An averaging step makes the PCAE2D features follow rotations and reflections of the image exactly. Trained on one image at a time, PCAE2D rebuilds images from six public datasets with a peak signal-to-noise ratio of 25.8 to 41.6 decibels. On CIFAR-10 images not used in training, a formula-based stand-in for the PCAE2D features performs within 1 decibel of several simpler classical methods. Five trained models also run on real IBM quantum computers without retraining, and rebuild images at 25.90 to 31.52 decibels. A short argument and a synthetic test show that, with a linear final layer, measuring qubits in pairs is needed for targets built from products of inputs. These results show that PCAE works as a hybrid model that rebuilds varied images and runs on today's quantum hardware at the six-qubit scale.

0.21

Federated Unlearning of Quantum Data via Classical Shadows

cs.DC quant-phcs.NI ·2026-10-13 ·Zihao Ding, Jun Huang, Cong-cong Xing
theory similarity 0.55
Abstract

Quantum federated learning trains a quantum neural network (QNN) across nodes that hold quantum data, such as the states of quantum sensors. To forget data, unlearning methods for quantum models replay them, and federated unlearning from stored updates removes whole nodes only. Quantum data cannot be replayed, since a state is consumed when measured and cannot be cloned. We propose Shadow-based Data Erasure (SHADE), in which each node records a classical shadow of every training state, a few randomized single-qubit measurements taken at training time. The gradient and curvature of a QNN on a state are expectations of observables, so SHADE estimates them for the forget data from the shadows at any later parameters and removes their effect by a federated Newton correction. Only classical estimates cross the network. We prove that the shadow size needed for a target unlearning error grows exponentially in the size of the backward light cone of the measured observable and not in the number of qubits. In simulation with 50 nodes and on edge boards, SHADE matches the forget accuracy of retraining within 0.5 points, without replay and in under 0.2 s.

0.13

Only What Was Seen: Observation-Gram Compaction of View-Dependent Appearance in 3D Gaussian Splatting

cs.CV ·2026-09-24 ·Krzysztof Pietroszek
similarity 0.54
Abstract · 22 pages, 6 figures

Most of the memory of a 3D Gaussian Splatting model holds spherical-harmonic colour coefficients, yet each Gaussian is seen only from the narrow cone of directions of the training cameras. We turn this into a distortion metric that other compressors can adopt: a per-Gaussian observation Gram matrix, accumulated from viewing directions and blending weights, is the exact first-order map from coefficient changes to squared image error and needs only the model and the camera poses. Under it, degree reduction becomes a closed-form projection that generalises truncation, degree allocation a Lagrangian rate-distortion problem, and vector quantisation the matrix-weighted Lloyd algorithm, of which Compressed3D's quantiser is the scalar case. Swapped into Compressed3D with everything else unchanged, the metric raises PSNR by +0.49 dB before fine-tuning, with SSIM and LPIPS following, and at matched rate still gains +0.32 dB without a single training image. A training-free stack built on the metric alone is 15% smaller than the image-free GSICO at equal quality on Mip-NeRF 360.

0.15

Representation Geometry and Inductive Biases in Quantum Classifiers across Classical Visual Benchmarks

cs.LG quant-ph ·2026-10-13 ·Yu Yamaoka, Weng Ian Chan, Kosuke Mitarai
similarity 0.54
Abstract

Quantum Machine Learning (QML) has a theoretical advantage over classical algorithms for specific synthetic data that is computationally hard. However, it remains unclear whether such theoretical advantages play a meaningful role for realistic classical data, such as natural images. Quantum structural properties induced by unitary operations or entanglement introduce inductive biases that differ from those of classical models, potentially leading to distinct learning behavior on real-world data. In a fully quantum learning pipeline, classical real-world data are first encoded into quantum states via a quantum feature mapping, analogous to a classical feature extractor, and a quantum classifier then classifies the resulting states. Quantum feature mappings generate representations that are difficult to realize classically, while also inducing representation-level biases that do not necessarily match the structure of realistic data. To enable a fair comparison at the classifier level, we focus on the classifier and use classical feature extractors that already provide powerful representations for natural images. By controlling the data scale and supervision strength, we analyze how the unitary structure of quantum classifiers affects generalization, and show that their effectiveness depends strongly on the geometry of the input representations. These results indicate that quantum classifiers benefit from classical features that are aligned with quantum feature spaces. Our analysis shows that kernel alignment identifies representations compatible with quantum feature spaces, providing insights into translating classical models into quantum algorithms.

0.06

Hidden selection rules and amplitude ceilings in quantum Fourier models

cs.LG quant-ph ·2026-10-31 ·Pavel Sulimov, Claude Lehmann
benchmark similarity 0.53
Abstract

Quantum models with Pauli data encodings compute trigonometric polynomials whatever channels, ancillas and outcome-averaged measurements follow, so their expressivity depends on the Fourier coefficients a circuit can reach. We identify two kinds of structure that settle this before training. An antiunitary time-reversal rule and a unitary reflection rule remove frequencies. For gate-level circuits, deciding whether such a rule exists reduces to a linear system over GF(2), solvable in polynomial time, and the time-reversal rule holds in 17.6% of 6,120 configurations of standard templates. Single-upload encodings cap the top coefficient at $2^{-m}$ for every channel, and we compute the tight ceiling for every frequency and a depth-independent re-uploading bound. Frozen before training, these bounds were never violated on a non-linearity benchmark, and they predicted trained performance on real data. On IBM processors the rule held on a 65-qubit chain, and we switched rule-breaking relaxation noise on and off by design.

0.09

Covering the Pauli Observables: Sampling Thresholds and the Design Effect of a Measurement Setting

cs.IT quant-pheess.SP ·2026-11-18 ·Kausthubh Chandramouli, Noah Siekierski, Bojko N. Bakalov, Dror Baron
similarity 0.52
Abstract · 30 pages, 5 figures, 3 tables

Quantum state tomography and shadow-based estimation rely on measuring Pauli observables. An experiment does not measure them one at a time: it chooses a measurement setting that assigns one of the bases X, Y or Z to each qubit, and a single run in that setting yields estimates of every Pauli observable compatible with it. We say that the setting covers those observables. We determine how many random settings cover a prescribed fraction of all Pauli observables. As the number of settings grows exponentially with the number of qubits, the covered fraction has a sharp threshold at a growth rate of $3^{3/4}$ per qubit, set by the rate-distortion function of covering at zero distortion. We give an explicit expression for the number of settings needed to reach a target fraction, accurate up to a remainder that reduces to a small oscillation for many qubits, and show that random sampling is asymptotically optimal up to a factor of less than 1.69. Coverage does not determine what a setting contributes to an estimator. Observables covered by one setting are estimated from the same outcomes, so their estimates are correlated. We quantify this correlation through the design effect of a setting, which equals the squared Pauli expectation that the setting captures and depends on the target state. We derive its mean over settings in closed form for every state and show that it can be estimated without bias from the measurement data. In simulations on six qubits, measuring settings needs 7.6 to 38 times fewer circuit runs than measuring the same number of observables independently. At high coverage, fitting the outcome histograms instead of averaged estimates roughly halves the reconstruction error, mainly because the fit counts how many settings cover each observable. The correlation itself costs such a fit about a factor of two, and a larger design effect signals more to gain from modeling it.

0.50

When Does Interference Help Learning? Kernel Geometry as a Pre-Experimental Test for Photonic Reservoir Computing

cs.CE quant-ph ·2026-10-08 ·Oishik Kar, Aswath Babu H
similarity 0.52
Abstract · 15 pages 5 figures

Multi-photon interference is the resource most native to photonic quantum machine learning, yet experiments on photonic reservoirs have reported advantages, null results, and train-only effects. These outcomes cannot be compared: each measures task-dependent accuracy on different tasks and platforms. Here we resolve the question task-independently through the kernel geometry of boson-sampling feature maps. Interference redistributes feature variance across roughly twice as many effective dimensions as distinguishable-particle statistics, generating a large geometric separation between the corresponding kernels. The separation grows superlinearly with indistinguishability, is linear in Hong--Ou--Mandel visibility at small visibility for two to four photons, and retains approximately 80% of its magnitude at the source quality of current quantum processors. Under experimental sampling budgets the separation is learnable on adversarially constructed tasks (accuracy advantage +0.22 plus or minus 0.05) and an order of magnitude smaller on natural tasks, gated by kernel--task alignment. The results reconcile the existing experimental record and supply a pre-experimental protocol: kernel geometry establishes that an interference-specific learning resource exists, and task alignment determines whether a given task can access it; both are computable before committing significant hardware resources.

0.58