CS Paper Radar

Naviq: An Open-Source System-on-Chip Simulator for Rapid Prototyping, Verification, and Design Space Exploration

Scott Smith, Lukas Zscherpel, Alyssa Huang, Marissa Lanz, Deming Chen

cs.AR ·submitted 2026-11-01 16:11 UTC · v1
publishedcode/data

Abstract

Modern FPGA SoCs are no longer just collections of accelerators on top of a programmable fabric. They combine programmable logic with hardened processors, NoCs, and components that dominate end-to-end performance. Evaluating individual pieces is insufficient; system performance depends on the interplay of SoC components. However, current FPGA SoC simulations provide limited support for this style of evaluation. Vendor simulations capture these interactions but are prohibitively slow for iterative design-space exploration. At the same time, generic software models overly abstract the hardware components that determine real behavior, resulting in less accurate simulations. Fast, easy-to-use simulators that accurately model real SoCs are critical for system debugging and design space exploration. We present Naviq, an open-source, cycle-level software simulator for FPGA SoCs, tuned to AMD Versal-class architectures. Naviq bridges accurate but slow vendor simulation and fast software modeling: it captures key behaviors of modern commercial FPGA SoCs while being fast enough for debugging and design-space exploration. Naviq models hardened SoC infrastructure in C++ and integrates accelerators through Verilator, allowing designers to evaluate custom hardware in a full-system environment. At the center of Naviq is an AXI4-compliant NoC model that captures transaction ordering, packetization, routing, backpressure, and memory interactions. Naviq provides CPU and memory integration, protocol checking, checkpointing, tracing, and performance-analysis tools for debugging and design-space exploration. Experimental results show Naviq closely reproduces the bandwidth and latency of Vivado's RTL NoC model while accelerating the evaluated simulations by 81x-182x. We present five case studies demonstrating Naviq's capabilities. Naviq enables practical full-system evaluation of modern FPGA SoC designs.

Comment
9 pages, 10 figures. This work is accepted to ASPDAC'27
DOI
10.1145/3840404.3848214

Closest papers

Nearest neighbours by meaning across the whole index.

TPCS: A Cycle-Level Simulation Paradigm with Native Execution Semantics for RTL Modeling and Generation

cs.AR ·2026-10-09 ·Chengzhen Meng, Xiaoyu Li, Chen Bai, Zhenyu Zhang, Hongjun Dai
similarity 0.69
Abstract · Submitted to IEEE TC

The growing diversity of domain-specific architectures and microarchitectural designs demands fast and accurate evaluation methods during early design stages. However, existing approaches suffer from a fundamental trade-off: high-level simulators offer speed but lack fidelity, while RTL-based tools provide accuracy at the cost of significant simulation overhead. This gap limits efficient pre-RTL microarchitecture exploration. Therefore, we propose Transaction-Pruned Cycle Simulation (TPCS), a novel modeling and simulation framework. It serves as a unified intermediate abstraction spanning microarchitecture modeling, cycle-accurate simulation, and synthesizable RTL implementation. TPCS organizes combinational logic as transaction-based function invocations and leverages host CPU control flow to naturally prune inactive logic, eliminating the need for explicit event scheduling or signal tracking. This enables cycle-accurate simulation with significantly improved performance. TPCS preserves structural correspondence with RTL and supports automatic generation of synthesizable designs. TPCS achieves 36$\times$-42$\times$ speedups over parallel Verilator on SMP systems and 3.4$\times$-7.2$\times$ over single-threaded Verilator on accelerators, with cycle-level waveform agreement on the evaluated traces. The generated RTL demonstrates comparable timing and area to handcrafted implementations, with relative changes of -4.7\% to +2.6\% in clock period and -3.3\% to +4.0\% in standard-cell area. By bridging the abstraction gap between high-level modeling and RTL design, TPCS enables a unified and agile pre-RTL workflow, allowing efficient microarchitecture exploration with both high performance and implementation fidelity.

0.30

VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration

cs.AR ·2026-08-24 ·Haoran Geng, Tomas Sousa Pereira, Xiaoyang Lu, Xian-He Sun, Michael Niemier +1 more
code/data similarity 0.69
Abstract · 14 pages, 12 figures. Source code available at https://github.com/Notre-Dame-HW-SW-Codesign-Lab/VIPER

Processing-in-Memory (PIM) promises to reduce data movement overhead by executing computation in or near memory, but its realized application speedup remains highly design-dependent. Non-offloadable host execution, host-PIM transfers, limited PIM capacity, and device programming latency can limit end-to-end speedup, making fast early-stage design-space exploration (DSE) essential. However, existing PIM evaluation methods remain limited: circuit- and device-level tools cannot capture these end-to-end PIM performance factors, while cycle-accurate simulation is too slow for iterative DSE. To address this gap, we present VIPER, a unified, lightweight, and architecture-aware performance evaluation framework for PIM DSE. VIPER profiles host execution once and combines the measured host behavior with a PIM-aware analytical engine that sweeps PIM-side parameters across candidate designs. It supports both Processing Near Memory (PNM) and Processing Using Memory (PUM) under task-offloading and data-triggered execution by capturing host-PIM transfer, array access, in-memory computation, device programming latency, and capacity-induced partitioning, providing rapid architecture-aware performance estimates for iterative DSE without repeated cycle-accurate simulation. We validate VIPER against a commercial UPMEM system and more than 400 cycle-accurate gem5 configurations. VIPER predicts the UPMEM offloading decision and break-even region a priori, and, with a refined transfer model, captures the measured peak-and-rolloff behavior with 12\% mean speedup error across the DPU sweep (6\% up to the 256-DPU peak). Against gem5, VIPER achieves less than 10\% error while reducing evaluation time from hours to under one minute. Case studies of UPMEM, ReRAM/FeFET crossbars, and IMCRYPTO show that architecture-aware DSE reveals key performance trade-offs that device-level evaluation misses.

0.24

A RISC-V Simulator for the Tenstorrent Tensix Architecture

cs.DC cs.AR ·2026-11-03 ·Nick Brown, Daniyal Arshad
publishedcode/data similarity 0.68
Abstract · Author accepted version of paper in the RISC-V for HPC SC26 workshop

RISC-V based AI accelerators have become popular and not only for AI and ML, but also as vehicles for exploring HPC workloads more generally. Tenstorrent are one example, and whilst they document their Tensix architecture in detail and develop their software stack openly, running code has historically required a physical card, and their recently released simulator targets hardware equivalence rather than introspection. In this paper we present Wolfpine, a community developed RISC-V simulator for the Tensix architecture, supporting both the Wormhole and Blackhole generations and integrating seamlessly with the TT-Metal software stack. Constructed entirely from publicly available documentation, open source software and measurements on physical hardware, Wolfpine is written in pure Python for readability and ease of modification. An opt-in, provenance-tracked cost model adds timing fidelity incrementally, and typed event streams, per-component tracing and timeline export enable programmers to identify and diagnose performance bottlenecks that the hardware itself hides.

0.38

FlashGPU-sim: Enabling GPU Modeling for Modern Architectures and AI Workloads

cs.AR cs.DC ·2026-09-14 ·Siying Yu, Yixun Hong, Guozhi Qiu, Jingci Liu, Feng Gu +4 more
top venuecode/data similarity 0.68
Abstract · To appear in MICRO 2026

As AI becomes increasingly ubiquitous, modern AI systems are shaped by a tight software-hardware co-design loop. Later GPUs expose features such as asynchronous data movement, tensor core pipelines, and fine-grained synchronization that high-performance kernels aggressively exploit, while emerging application behaviors increasingly influence the next generation of hardware design. Unfortunately, the latest open-source simulators for NVIDIA GPUs focus on architectures and software stacks from roughly six years ago. Therefore, they cannot support many state-of-the-art AI kernels generated by modern compiler stacks, e.g. Triton, or accurately model the hardware features they depend on. As a result, architects lack a credible platform for analyzing bottlenecks in this flywheel or evaluating design trade-offs for future AI systems. To bridge this gap, we present FlashGPU-sim, an open-source, execution-driven, cycle-accurate GPU simulator for modern AI workloads. FlashGPU-sim faithfully models modern hardware features such as asynchronous data movement, fine-grained synchronization, tensor-core execution, and distributed shared memory. A Triton extraction front-end allows direct simulation of optimized AI operators without manual porting, while multi-threaded execution makes large-scale software-hardware co-design practical. Across 131 workload configurations on RTX 5090, H100, and B200, FlashGPU-sim achieves a cycle-level MAPE of 5.24%, while multi-threaded simulation reaches a 7.86x speedup with 16 host threads. An H100 case study further demonstrates its utility for microarchitectural design exploration.

0.44

VHDL-REPOBENCH: A Repository-Level Benchmark for Evaluating Large Language Models on VHDL Design Generation

cs.PL cs.ARcs.CL ·2026-10-04 ·Prashanth Vijayaraghavan, Akul Malhotra, Ashutosh Jadhav, Ehsan Degan, Vandana Mukherjee
publishedbenchmarkcode/data similarity 0.67
Abstract · 7 pages

Large Language Models (LLMs) are increasingly applied in hardware design automation, demonstrating strong potential in generating and understanding hardware description languages. However, most existing benchmarks focus on Verilog, with limited evaluation of VHDL, which remains widely used in industry and academia for FPGA and safety-critical systems. To address this gap, we introduce VHDL-REPOBENCH, a large-scale, cross-file, repository-level benchmark for assessing LLM capabilities on realistic VHDL design generation and analysis tasks. VHDL-REPOBENCH curates ~100 open-source VHDL repositories, encompassing ~2.5k VHDL files and ~500 testbenches, and provides structured problem statements, module stubs, and self-verifying testbenches. The benchmark enables comprehensive evaluation across syntax, semantic correctness, hierarchical reasoning, cross-file dependency resolution, and functional verification. We evaluate several state-of-the-art models, including GPT-4o, Llama-3-70B, Qwen2.5-72B, CodeLlama-70B, and multi-step reasoning approaches such as Reflexion and CoDes. Results reveal that while current LLMs achieve moderate line- and block-level accuracy, substantial challenges remain in multi-file reasoning, hierarchical design understanding, and specification-to-module generation. VHDL-REPOBENCH represents the first large-scale VHDL-focused benchmark and provides a valuable resource for the hardware design community to evaluate, compare, and advance LLM capabilities for practical VHDL development.

0.38

Mechanistic Critics for Sample-Efficient NPU Design-Space Exploration

cs.AR ·2026-11-18 ·Yicheng He, Yuqi Xue, Tianyang Wu, Jian Huang, Bin Hu
top venuecode/data similarity 0.65
Abstract · Accepted by NeurIPS 2026

NPU design-space exploration for LLM inference mainly relies on an expensive simulator that often returns only scalar feedback such as latency and power. Such feedback can rank evaluated configurations, but gives little information for deciding why a configuration is slow or which architecture parameter should be changed next. This limitation is especially severe because prefill and decode workloads can be limited by different resources, including compute throughput and HBM bandwidth. We propose CriticNPU, a sample-efficient DSE framework built around an online-calibrated mechanistic critic for NPU architecture design. The critic uses explicit hardware limits to evaluate NPU configurations: before simulation, it estimates whether a proposed configuration is likely to improve over the current best and filters weak candidates; after simulation, it aggregates operator-level runtimes into prefill/decode bottleneck summaries and predicts the effect of candidate parameter changes. We instantiate the critic with a Roofline-style model that derives compute and memory limits from architecture parameters and calibrates per-operator-type effective limits using simulator observations. And CriticNPU combines this critic with a workload extractor and an architecture planner to propose configurations. Across six LLM workloads and 16 deployment configurations per model, CriticNPU achieves best-or-tied-best latency in 74% of prefill and 87.5% of decode settings while using roughly half the simulator calls of competitive DSE baselines. We conduct extensive ablation studies and detailed analyses to validate the effectiveness of our method from multiple perspectives. Our code is available at https://github.com/bruno686/CriticNPU.

0.47

Compiler and Hardware Co-Design for Accelerator Architectures

cs.AR ·2026-09-24 ·Karl Herman Krause, Emad Jacob Maroun, Martin Schoeberl
similarity 0.65
Abstract · 8 pages, 4 figures

Heterogeneous accelerator architectures offer an efficient path to performance for compute-intensive workloads. However, full-stack integration remains difficult. We present EAAC (Extensible Accelerator Architecture), a flexible and extensible compiler and hardware architecture designed to lower the overhead of hardware-compiler co-development for rapid prototyping of hardware accelerators. EAAC targets static data-flow workloads with predictable memory access patterns. By using MLIR, we enable possible integration with a range of different frontends that emit MLIR. And by providing a minimal set of compiler functionality that enable necessary data-orchestration we lower the effort needed to get a simple implementation of a hardware acceleration unit up and running, while providing a relatively blank and un-opinionated starting point for further work. We validate this approach with a prototype GEMM accelerator combining a systolic array unit with an embedded RISC-V core, compiled end-to-end through the EAAC MLIR pipeline. On a synthetic fully-connected-layer workload, the accelerator achieves a 28x speedup in execution time over a RISC-V-only baseline, with the GEMM operation itself accounting for only 1.64\% of total execution time. We further characterize the compiler's hardware-semaphore allocation, showing that the number of semaphores required scales linearly with instruction count in the worst case, and identify this as a concrete target for future optimization.

0.23

Dryas: A Reprogrammable Engine for High-Speed Interconnect Tracing and Analysis

cs.AR eess.SP ·2026-08-13 ·Manuel Bröchin, Tom Kuchler, Michael Giardino, David Cock, Timothy Roscoe
code/data similarity 0.65
Abstract · 12 pages, 12 figures

The proliferation of heterogeneous components in modern computing systems has been accompanied by new higher bandwidth and lower latency interconnects. These interfaces and protocols are enormously complex and the process of developing, debugging, and analyzing FPGA-based implementations requires significant engineering work. Moreover, once a functional implementation is completed, optimization of the controller and associated software requires processing potentially hundreds of gigabytes of trace data. In this paper, we present Dryas, an open source tool for analyzing such an interconnect. We developed our tool, using minimal hardware resources, alongside an FPGA implementation of a very high speed, low latency (30~GiB/s, 200~ns) interconnect. With our run-time reprogrammable overlay engine we can inspect this interconnect to find rare, complex, or transient events even at full operation. This filtering engine is based on non-deterministic finite automata (NFAs), efficiently implemented using state transition elements (STEs), allowing us to trace events at a cache-line granularity. Moreover we can change the filters in less than a second, without reprogramming the FPGA or interfering with the running application. This data enables not only debugging the implementation of the interconnect itself, but analyzing the behavior of accelerated applications. We examine the mathematical basis for using NFAs and describe their implementation on a real coherent CPU-FPGA research platform. We then evaluate the scalability of Dryas for various size NFAs, followed by two different use cases: debugging FPGA implementation of the interconnect and analyzing cache behavior.

0.26