CS Paper Radar

Accelerating LLM Decoding with In-DRAM Parallelism

Kevin Xu, Tatsuya Kubo, Daichi Tokuda, Shinya Takamaeda-Yamazaki, Issei Sato

cs.AR ·submitted 2026-11-02 02:22 UTC · v1

Abstract

Autoregressive decoding of large language models (LLMs) on edge devices is dominated by memory-bound general matrix--vector multiplication (GeMV) operations. Processing-using-DRAM (PUD) is a promising computing paradigm that can alleviate this bottleneck by reducing processor--memory data transfers and enabling massively parallel computation within DRAM (e.g., across 65,536 columns). However, weight matrices in individual LLM layers (e.g., a QKV matrix in Llama3 8B with 6,144 rows) are typically too small to fully utilize parallelism in PUD. To address this challenge, we propose an algorithm--system co-design for PUD-based LLM inference. At the algorithm level, we enable a subsequent projection to be packed with the current projection by reformulating it as a computation on the current residual state plus a correction for the residual update. Layer redundancy allows this correction to be approximated using fewer bit-serial steps. At the system level, we tailor data mapping and execution to improve utilization of either columns within DRAM subarrays (SIMD) or independently controlled banks (MIMD). Overall, we achieves up to $1.41\times$ end-to-end decoding speedup over the PUD baseline, corresponding to a $2.45\times$ speedup over processor-based execution.

Closest papers

Nearest neighbours by meaning across the whole index.

Tri-Stack-PIM: A Heterogeneous Multi-Die 3D-Integrated Processing-in-Memory Architecture for Efficient LLM Inference

cs.AR ·2026-11-10 ·Shuao Jia, Zichao Ling, Chen Bai, Kang Zhao, Jianwang Zhai
similarity 0.70
Abstract · 11 pages, 9 figures

Large language model (LLM) inference during autoregressive decoding is fundamentally memory-bandwidth-bound. Existing three-dimensional (3D) stacked processing-in-memory (PIM) architectures alleviate the off-chip bandwidth wall, yet remain constrained by several limitations: physical layer (PHY), controllers, and direct memory access (DMA) engines compete with arithmetic units for advanced-node base-die area; hybrid-bonding keep-out zones fragment the base-die floorplan and impede physical design; compute tiles built in a dynamic random access memory (DRAM) process are restricted to low logic density, capping achievable throughput; and nonlinear operations offloaded to the host reintroduce a communication bottleneck. We present Tri-Stack-PIM, a heterogeneous three-die architecture that resolves these tensions by dedicating a top DRAM die to storage, a middle buffer die on a mature process node to PHYs, DMA engines, and near-memory compute units, and a bottom base die on an advanced node exclusively to single-instruction-multiple-data (SIMD) multiply-accumulate (MAC) arrays. We further introduce a Unified Buffer-Aware Ready-based (UBAR) hardware out-of-order micro-operation scheduler that enforces cross-die dependency correctness at runtime while maximizing issue-slot utilization through a multi-term priority function, recovering up to 90% of the cycles that an in-order policy would forfeit. A joint architecture-dataflow co-exploration identifies Pareto-optimal configurations that reduce the energy-delay product (EDP) by 33-66x over naive parameter selection. Evaluated across multi-head, grouped-query, and multi-query attention (MHA, GQA, MQA) mechanisms with batch sizes 1-32, Tri-Stack-PIM achieves geometric-mean speedups of 4.95x, 2.57x, and 1.68x across all three attention mechanisms and batch sizes over a graphics processing unit (GPU) baseline, AttAcc, and H2-LLM, respectively.

0.21

Accelerating the Mitigation of LLM Inference Nondeterminism Across GPU Architectures

cs.AR cs.LG ·2026-09-22 ·Liam Cooper, Shinnung Jeong, Hyeran Jeon, Jeffrey Young, Hyesoon Kim
similarity 0.69
Abstract · 14 pages, 5 figures

Large language model (LLM) outputs are expected to be reproducible under greedy decoding, yet in practice the same model, prompt, and software stack produce different outputs on different GPUs. The root cause is floating-point non-associativity combined with hardware-dependent kernel selection. Inference frameworks select different matrix-multiplication kernels on each architecture, with different parallel reduction orders and unspecified tensor-core arithmetic, and the resulting rounding differences can flip output tokens. Existing solutions have imperfect cross-architecture reproducibility and incur a significant performance penalty. We present a solution employing a set of fixed-configuration fused-upcast GEMM kernels that load 16-bit weights from memory, upcast them to FP32 in registers, and accumulate with IEEE-754 arithmetic in a reduction order that is a pure function of the problem shape and is therefore independent of the device, its SM count, or kernel scheduling. By fixing the floating-point reduction order as a function of problem shape alone, every GPU runs the same operation sequence, so cross-architecture reproducibility of the linear layers reduces to correct IEEE-754 arithmetic rather than to rounding differences staying below a tie-flip threshold. We confirm our solution's linear-layer outputs are bitwise identical across NVIDIA Ampere, Ada, and Hopper GPUs, while running $1.17$ to $3.1\times$ faster end-to-end than the state-of-the-art solution and cutting weight-memory traffic in half.

0.33

MINE: Entropy-coded Memory-efficient Inference for Large Language Models

cs.LG cs.DCcs.PF ·2026-11-06 ·Emil Schätzle, Markus Püschel
code/data similarity 0.69
Abstract · Submitted to the 15th International Conference on Learning Representations (ICLR), 2027. Artifact: https://doi.org/10.5281/zenodo.23885927

We present MINE (Memory-efficient INference Engine), a lossless entropy coding approach that accelerates single-stream inference of Large Language Models (LLMs), where existing lossless compression methods yield speedups only for specific data types such as BF16 and under additional assumptions. Single-stream decoding is strongly memory-bound, since every weight must be streamed from memory once per generated token and requests cannot be batched in local or low-latency deployments. At the core of MINE is dtANS-LLM, a GPU entropy coding scheme adapted from the prior dtANS to the needs of LLM inference. It exploits the non-uniform distribution of weights, which persists even after quantization, and exposes hyper-parameters that trade compression ratio against decoding cost. We auto-tune these parameters for each tensor and GPU to obtain the Pareto front between model size and decoding latency. MINE integrates into vLLM as a plugin and selects the best kernel configuration for a given memory budget. On Llama 3.1 8B Instruct with a 2.1-bit EntQuant checkpoint, MINE achieves speedups of 2.52x and 1.48x over the fastest baseline on an RTX 4060 Ti and an RTX 5090, at effective bitrates of 2.24 and 3.43 bits per weight. MINE is available as open source.

0.28

Flash-dLLM: IO-Aware KV Caching and Parallel Decoding for Fast, Memory-Efficient Diffusion LLMs

cs.CL ·2026-09-22 ·Quan Nguyen-Tri, Mukul Ranjan, Zhiqiang Shen
code/data similarity 0.69
Abstract · Code available at: https://github.com/VILA-Lab/Flash-dLLM

Diffusion Large Language Models (dLLMs) have recently emerged as a promising alternative to autoregressive LLMs by enabling non-autoregressive text generation. However, their practical deployment remains limited by inefficient inference, largely due to the absence of effective Key-Value (KV) caching and scalable parallel decoding mechanisms. Existing acceleration methods typically study KV caching and parallel decoding in isolation, overlooking the I/O bottlenecks that arise when cache reuse and parallel token verification are jointly applied. In this work, we introduce $\textbf{Flash-dLLM}$, a training-free inference acceleration framework for fast and memory-efficient dLLMs. Flash-dLLM first identifies GPU memory I/O as a dominant bottleneck in KV-cache-enabled dLLM inference and addresses it with an I/O-aware fused KV-cache kernel that reduces redundant memory movement. Building on this optimized cache mechanism, Flash-dLLM further proposes an efficient KV-cache-driven draft-and-verify decoding strategy, where the dLLM itself serves as both drafter and verifier without requiring an auxiliary model. This unified design enables faster decoding while preserving generation quality and improving scalability to longer sequences and larger batch size. Extensive experiments on mathematical reasoning and code-generation benchmarks demonstrate that Flash-dLLM consistently outperforms existing state-of-the-art dLLM acceleration methods in both inference speed and memory efficiency. In particular, it achieves $5.1\times$ and $11.0\times$ speedups over prior strongest baseline Elastic-Cache on GSM8K and HumanEval, respectively.

0.48

SPECTRA: Adaptive Execution of Speculative Decoding on a Runtime-Reconfigurable Tiled Architecture

cs.AR cs.AIcs.DC ·2026-09-21 ·Gabriele Tombesi, William Baisi, Je Yang, Elisavet Lydia Alvanaki, Kevin Lee +3 more
published similarity 0.68
Abstract · Accepted at the IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

LLM inference on edge devices is constrained by computational and memory resources, making efficient autoregressive decoding challenging. Speculative decoding alleviates this bottleneck by generating tokens with a smaller draft model and verifying multiple tokens in parallel with a batched target model pass. However, verification introduces a runtime-dependent intermediate regime between memory-bound general matrix-vector (GEMV) operations in decoding and compute-bound general matrix-matrix (GEMM) operations in prefill, as its arithmetic intensity varies with speculation length and acceptance rate. We present SPECTRA, a runtime-reconfigurable tiled architecture that sustains high utilization across the full speculative decoding pipeline. Within each tile, the compute engine switches between systolic execution for GEMMs and vector-lane execution for GEMVs. Across tiles, SPECTRA dynamically adapts computation parallelism by selecting tile count, kernel partitioning, and communication pattern. Both tile-level and system-level reconfiguration operate on a per-kernel basis, enabling efficient execution across these diverse regimes. Evaluated on a 20-tile FPGA prototype across the Pythia, SmolLM2, and GPT-2 families, SPECTRA achieves up to $2.09\times$ speedup from tile-level reconfiguration and a further $1.25\times$ gain from system-level adaptability over fixed designs.

0.54

StrataFlux: Memory-Hierarchy-Native Low-Bit LLM Inference

cs.LG cs.DC ·2026-11-05 ·Jake Hyun, Ziyu Zhao, Jae-sun Seo, Mohamed S. Abdelfattah
similarity 0.68
Abstract · 34 pages, 18 figures, 44 tables. Includes appendix

Quantization reduces the memory and bandwidth demands of large language model (LLM) inference but can degrade accuracy; offloading higher-precision data can instead stall generation. We introduce StrataFlux, a framework that challenges this tradeoff by recovering accuracy lost to low-bit weight and key-value (KV) cache quantization while retaining quantization's memory and speed advantages. StrataFlux co-designs refinement representation, selection, and delivery to make host RAM and solid-state drives useful sources of additional precision. Its selective precision streaming reduces transfer volume, overlaps delivery with computation, and reuses fetched precision across decoding steps so generation need not wait for every transfer. We evaluate 2-4-bit weights and 2-3-bit KV-cache on dedicated GPUs and unified-memory platforms. For 2-bit Llama-3.1-8B-Instruct weights, StrataFlux reduces WikiText-2 perplexity from 9.46 to 8.40 while maintaining 95.4% of the quantized base's throughput on RTX 5090. With 2-bit weights and KV, StrataFlux raises Qwen3-8B's AIME 2024/2025 accuracy from 11.0% to 47.1% at unchanged GPU memory use. At 128K context, Llama-3.1-8B-Instruct with 3-bit weights and 2-bit KV achieves comparable perplexity and speed to vLLM's 4-bit AWQ weights and 8-bit KV on RTX 5090, using approximately half the GPU memory. These results show that GPU-resident precision need not set the accuracy ceiling, nor offloading-tier latency dictate decoding speed.

0.20

Memory Bandwidth, Not FLOPs: Profiling and Accelerating Query-Based Segmentation Decoders on Edge GPUs

cs.AR cs.LGcs.PFeess.IV ·2026-09-29 ·Oliver Busemann, Torben Töniges, Martin Atzmueller
published similarity 0.68
Abstract · Accepted at the British Machine Vision Conference (BMVC) 2026. Supplementary material included

Query-based segmentation models achieve strong performance even under real-time inference on workstation GPUs. On edge devices, however, we show their transformer decoders are deeply memory-bandwidth-bound, a bottleneck invisible to standard FLOP analysis that worsens with input resolution and limited DRAM bandwidth. An FP16 roofline analysis with tensor-core GEMMs active and hardware DRAM counters shows that the non-tensor-core aggregates of FastInst and Mask2Former reach only $2.5\%$ to $6\%$ of the CUDA-core ridge yet account for $53\%$ to $70\%$ of decoder time and $61\%$ to $71\%$ of decoder bytes. The largest individual kernels sustain up to $90\%$ of nominal peak DRAM bandwidth, effectively saturating the memory bus. The bottleneck is therefore not primarily low GEMM intensity, but cross-kernel activation traffic. CompactInst addresses this bottleneck using parameter-free spatial pooling at $4{\times}$, which reduces the bytes moved within the transformer decoder, while a two-convolution refinement head recovers spatial detail. Under TensorRT FP16 on Jetson Orin Nano, CompactInst delivers decoder speedups from $2.35{\times}$ to $4.74{\times}$ and model speedups from $1.57{\times}$ to $2.62{\times}$ as input resolution grows, while closely matching accuracy ($-0.4$ AP on COCO val2017, $+0.2$ AP on Cityscapes test). A heavier variant with $2.57{\times}$ more decoder FLOPs still runs its decoder $1.74{\times}$ faster on the most bandwidth-constrained device, confirming at the deployment level that decoder bytes, not FLOPs, govern latency.

0.31

BitLLM: Efficient Low-Bit, Conversion-Hiding LLM Decoding on Mobile GPUs

cs.AR cs.LGcs.OScs.PF ·2026-10-31 ·Hangyu Zheng, Zhihao Shu, Kunxiong Zhu, Minghai Qin, Xiaolong Ma +2 more
top venue similarity 0.67
Abstract

The rapid scaling of large language models (LLMs) has unlocked remarkable capabilities across various domains. However, deploying LLMs on mobile devices remains challenging because of their high computational and memory requirements. Low-bit quantization (e.g., 4-bit weights, 8-bit activations) can reduce model size while preserving accuracy, but its practical efficacy on mobile GPUs has been limited so far. In this paper, we identify that the performance gap stems primarily from frequent data type conversions between quantized and floating-point values, and dynamic and inefficient memory access patterns caused by the growing Key-Value (KV) cache during autoregressive decoding. We introduce BitLLM, a mobile inference engine that addresses type conversion overhead and suboptimal memory accesses in quantized LLMs. Our approach features an adaptive layout and packing strategy for the KV cache that ensures efficient memory access throughout LLM decoding. This is coupled with an integer-native execution pipeline that defers and overlaps type conversion outside the compute hot path, keeping the critical MatMul stages in the integer domain. Implemented on off-the-shelf mobile GPUs, BitLLM outperforms leading engines, i.e., LLAMA.CPP, MNN-LLM, LiteRT-LM, and MLC-LLM, achieving average speedups of 1.78$\times$, 1.73$\times$, 1.58$\times$, and 1.47$\times$, respectively, across various models and quantization levels. Under long-context generation, BitLLM reduces average energy consumption (per token) by up to 88.9%.

0.58