CS Paper Radar

Low-rank corrections to a shared reference Jacobian for GPU-parallel AC $N\!-\!1$ contingency analysis

Marc Hunkemöller, Nico Westerbeck, Joost van Dijk, Lars Schewe, Dirk Witthaut

eess.SY cs.DCmath.NA ·submitted 2026-11-02 12:12 UTC · v1

Abstract

Contingency analysis repeatedly solves the power-flow equations under many single-element outages, an increasingly demanding workload as operating margins tighten and renewable variability grows. Graphics processing units (GPUs) are attractive for this task, but a change in topology alters the sparsity pattern of the Jacobian, preventing the uniform batched factorization on which efficient GPU solvers rely. This paper presents a GPU-parallel Newton--Raphson solver for $N\!-\!1$ contingency analysis that separates the change in operating state from the change in topology. A single reference Jacobian is inverted once and reused across all contingencies. Each topology change is expressed as a low-rank Woodbury correction, while the residual state-dependent perturbation is handled by an inner iterative solve, a truncated Neumann series or the biconjugate gradient stabilized method. We analyze the spectral radius and condition number of the resulting iteration matrices and show that the reference Jacobian is an effective preconditioner. On transmission-scale benchmarks, the method attains per-topology solve times competitive with an optimized 80-core central processing unit baseline, with the low-rank correction accounting for approximately 1--2\% of the workload. This makes GPU-parallel $N\!-\!1$ contingency analysis feasible at transmission scale without per-topology refactorization.

Comment
Submitted to IEEE Transactions on Power Systems. 10 pages, 5 figures, 1 table

Closest papers

Nearest neighbours by meaning across the whole index.

Accelerating the Solving of Many Tiny General Linear Systems on GPUs: Application to Constitutive Laws

cs.DC ·2026-09-14 ·Tristan Chenaille, Francesca Cuteri, Rapha{ë}l Prat, Guillaume Latu, Thomas Helfer
code/data similarity 0.68
Abstract

Many applications require solving large numbers of independent linear systems on GPUs. While this need is well addressed for small to large systems, tiny ones, understood here as systems of dimension below 32, remain challenging. This is especially relevant in constitutive law evaluation, where millions of integration points are handled independently, and where each constitutive update generally relies on a Newton iterative method. Each iteration then requires the double-precision solution of a tiny general square linear system using LU factorization with partial pivoting (LUpp). The present study was conducted within a closed-source prototype, which serves as a demonstrator for porting to NVIDIA GPUs constitutive law evaluations currently provided on CPUs by TFEL/MFront, an open-source code generation tool for material knowledge. We compare several double-precision LUpp solvers, including implementations from GPU linear algebra libraries as well as custom-designed CUDA kernels. The comparison is performed first on large batches of standalone linear systems, and then within the full constitutive-law evaluation workflow, where each integration point requires a sequence of distinct linear systems, one per iteration of its own Newton loop. The study shows that the best LUpp solving strategy strongly depends on several factors including system size and application context. We discuss several key aspects, including register pressure, occupancy, the ability to invoke the LUpp solver directly from device code, and whether assigning several threads to each system is the most efficient strategy. Experiments on an NVIDIA H100 GPU show that the specialized LUpp solvers proposed in this work can outperform existing state-of-the-art approaches for this class of workloads, with speedups of up to 6.5x over cuSolverDx, and up to 17.7x over MAGMA.

0.19

Symbolic-Permutation-Based Direct Sparse Jacobian Assembly for Accelerated Power-Flow Analysis

eess.SY cs.PFmath.NA ·2026-10-08 ·Tianshi Cheng, Venkata Dinavahi
code/data similarity 0.65
Abstract · 9 pages, 3 figures

The repeated assembly of the sparse Jacobian matrix constitutes a primary computational bottleneck in the Newton-Raphson power-flow analysis. Through an algebraic equivariance analysis of the Jacobian matrix, this paper proposes a direct sparse Jacobian assembly method based on symbolic permutation. By pre-applying the permutation to the admittance matrix during a one-time symbolic phase, the runtime bus-type projection overhead is entirely eliminated. Consequently, complex Jacobian differentiation and global matrix assembly fuse into a single operation, yielding a single-pass, branchless algorithm that streams values directly into contiguous memory. The framework is realized in the open-source RustPower solver. Benchmarks on IEEE test systems and PEGASE 9241 demonstrate that the proposed assembly is 24.4-30.1x faster than the MATPOWER- style baseline and 6.0-7.8x faster than the Schafer-Braun optimized assembly. End-to-end, the grid-level solve time is 11.7x-154.3x faster than pandapower 3.5.4 with Numba, while leaving numerical results and convergence behavior unchanged. Compared with the native C++ LightSim2Grid 1.0.0, grid-level performance is comparable on IEEE 39 and 1.3x-1.8x faster on IEEE 118 and the PEGASE systems. The method extends directly to general problems where a sparse Jacobian inherits its structure from a static network operator, including transient stability analysis, EMT simulation, and OPF Hessian assembly.

0.62

GPU-Enabled Large-Scale Optimization Using Randomized Linear Algebra

cs.LG math.OCstat.ML ·2026-09-08 ·Pratik Rathore, Zachary Frangella, Parth Nobel, Xuning Hu, Madeleine Udell
code/data similarity 0.63
Abstract · 32 pages, 16 figures

This paper introduces rlaopt, a PyTorch-based package for large-scale optimization and scientific computing using randomized numerical linear algebra (RandNLA). Despite substantial progress in RandNLA-based algorithms, few implementations combine GPU acceleration with a simple interface for specifying optimization problems. rlaopt addresses this gap by providing GPU-enabled solvers for positive-definite linear systems and convex empirical risk minimization with constraints and regularizers. These solvers use RandNLA to accelerate conjugate gradient (NystromPCG), operator splitting (NysADMM), and stochastic gradient methods (SAPPHIRE). Moreover, rlaopt includes a modeling language that lets users specify problems using natural mathematical syntax. rlaopt automatically checks compatibility with the selected solver and performs the required problem decomposition. The solvers also support differentiation through their iterations, enabling applications such as hyperparameter tuning. Experiments on ridge regression, bounded multinomial logistic regression, and bounded elastic net identify when randomized preconditioning improves performance and demonstrate substantial speedups from GPU execution. The package is open-source under an Apache license, with source code at https://github.com/udellgroup/rlaopt and version 0.1.0 available on PyPI.

0.49

Normalize-Then-Precondition: A Hierarchical Approach to Marginal Scale and Interaction Geometry for LLM Training

cs.LG cs.AI ·2026-09-29 ·Zixuan Gong, Zeyu Gan, Jiaye Teng, Yong Liu
code/data similarity 0.61
Abstract

Matrix optimizers have emerged as a promising direction, with Muon standing out as a prominent design. Revisiting Muon through its full-Gram representation, we observe that it jointly processes marginal-scale and interaction information. This opens an alternative way to organize geometric information hierarchically, motivating the Normalize-Then-Precondition framework. Specifically, it first uses diagonal-Gram information to construct a marginally normalized update, then applies spectral preconditioning to its directional interaction geometry. Building on this framework, we develop NormPre with NormPre-G and NormPre-L adopting global and localized spectral preconditioning, grounded in spectral-norm steepest descent and a regularized formulation followed by leading mode selection, respectively. To enable large-scale training, NormPre-G uses Newton-Schulz iterations and NormPre-L employs randomized sketching to approximate the leading interaction eigenspace. Theoretically, we establish $\mathcal{O}(T^{-1/2})$ convergence guarantees for simplified versions of NormPre. Across extensive pretraining experiments on GPT-2 Small, LLaMA and Qwen3, both variants consistently outperform AdamW, Muon and MANO under matched training budgets. Further efficiency and spectral analyses reveal the complementary strengths of two variants and characterize their performance-efficiency trade-off. We open-source our code through a GitHub repository at https://github.com/zx-gong/NormPre.

0.40

BLOKS: Scaling Kernel Solvers with Sketched Block Preconditioning

cs.LG stat.ML ·2026-10-09 ·Giordano Vitale, Giacomo Meanti, Marco Rando, Blanca Ayuso de Dios, Lorenzo Rosasco
benchmark similarity 0.61
Abstract · 29 pages, 7 figures, 9 tables

Kernel Ridge Regression (KRR) is a theoretically sound algorithm for nonparametric learning, which is also often used to investigate properties of deep learning. However, the exact KRR formulation incurs time and memory costs preventing applicability to large datasets, motivating the development of approximate solvers. These algorithms rely on (i) iterative methods, to avoid the computational burden of direct solutions; (ii) sketching or batching, to reduce the problem size; and (iii) preconditioning, to accelerate convergence. While crucial for fast convergence, preconditioning incurs memory costs that can be managed by lowering the number of free parameters of the model, potentially at the expense of expressivity and hence accuracy. To address this challenge, we propose BLOKS, a Conjugate Gradient-based solver for Nyström-sketched KRR built around a novel preconditioner that combines a block Jacobi approximation with sketching. The BLOKS preconditioner has memory cost independent of both the dataset size and the number of parameters, allowing scaling to large models. We provide a memory-efficient, GPU-accelerated implementation and show that BLOKS achieves excellent accuracy while retaining favorable time/memory complexity. Indeed, on standard large-scale datasets used to benchmark kernel solvers, BLOKS achieves comparable or better performances than state-of-the-art methods.

0.11

Benchmarking CPU, GPU, and ML Power-Flow Solvers from 14 to 70,000 Buses

cs.DC cs.SE ·2026-10-20 ·Benjamin Donnot, Sami Tazi, Eva Boguslawski, Nourredine Henka
benchmarkcode/data similarity 0.61
Abstract

Learned surrogates for power-flow (PF) computation are usually motivated by speed, compared against a single CPU-based baseline. We show this comparison is fragile: across 7 open-source CPU-based solvers evaluated on identical inputs, throughput varies by roughly 2.5-3 orders of magnitude, so the choice of baseline alone can flip the conclusion. We build a benchmark spanning 9 physics-based solvers: 7 CPU-based and 2 GPU-based, including a new batched GPU solver, gumsim2grid - and 3 published ML surrogates, evaluated under a shared, independently implemented KCL-mismatch check across 15 grids from 14 to 70,000 buses. On the PF task itself, a sufficiently parallelized CPU solver or gpusim2grid matches or exceeds the throughput of the ML surrogates we test while remaining orders of magnitude more accurate; we find no evidence that these GNN-style surrogates are yet competitive for PF specifically, though prior work reports genuine gains on related but more combinatorial tasks such as optimal power flow or power grid control. Beyond this finding, we hope the benchmark suite, code and reference evaluator released at https://github.com/Grid2op/gpusim2grid helps close a broader reproducibility gap in this space, where batched GPU-based PF solvers are rarely open-sourced or evaluated against a common set of baselines.

0.27

Accelerating Branch MPC with Two-Level Parallel Direct Solves on GPUs

eess.SY math.OC ·2026-09-24 ·Fenglong Song, Luyao Zhang, Liang Wu, Ján Drgoňa, Colin N. Jones
similarity 0.60
Abstract

Branch model predictive control optimizes multiple future trajectories coupled through shared decisions, with computational demands increasing as the number of scenarios and prediction horizon grow. We present a GPU-accelerated direct linear solver for branch MPC formulations in which all trajectories share a single root decision node and evolve independently thereafter. By operating at the linear-algebra level, the solver provides a reusable backend for multiple optimization algorithms whose reduced systems have the required symmetric positive-definite structure. The solver exploits two levels of parallelism: across scenarios and along each prediction horizon. A tailored variable ordering enables horizon-parallel Cholesky factorization while preserving a single root-tail coupling block per scenario in the factor. Numerical experiments demonstrate substantial speedups over state-of-the-art sparse direct solvers, achieving factorization speedups of up to 6.0$\times$ over cuDSS and 27.6$\times$ over eight-thread PARDISO, with triangular solve speedups of up to 3.5$\times$ and 15.8$\times$, respectively.

0.16

PaNGEA: Parallel Node Generation and Exploration Algorithm on GPU

cs.DC math.OC ·2026-10-02 ·Jean Pauphilet, Yupeng Wu
similarity 0.60
Abstract

Primal heuristics for finding high-quality feasible solutions are an important component in mixed-integer optimization (MIO) solvers. Recent advances in GPU-accelerated optimization algorithms show the potential of GPU acceleration for continuous optimization. In this paper, we introduce the Parallel Node Generation and Exploration Algorithm (PaNGEA), a GPU-friendly MIO primal heuristic. PaNGEA explores restricted subproblems by combining linear-relaxation solves with a local-search procedure designed for efficient batched execution on GPUs. In addition, instead of relying on a single heuristic for iterative variable fixing, we leverage GPU batching capabilities to generate and explore multiple subproblems in parallel. PaNGEA leverages GPU capabilities in two ways. First, on 283 MIPcc26 and MIPLIB instances, implementing a single-node primal heuristic on the GPU reduces the average gap integral by 8-18% relative to its CPU counterpart. Second, generating and exploring multiple nodes in parallel further reduces the average gap integral by 12-19%.

0.22