CS Paper Radar

AIRoA-0: Long-Horizon, Precise, Cross-Embodiment Manipulation from Handheld Data

Yueh-Hua Wu, Kei Ota, Hanlong Li, Hayata Yuasa, Jason Wang, Kengo Ikeuchi, Kensuke Chiyoma, Makoto Sugiura, Masafumi Takahashi, Masatoshi Tateno, Naoaki Kanazawa, Nicola Scianca, Petr Khrapchenkov, Satoshi Otsubo, Takehiko Ohkawa, Takuya Okubo, Tatsuya Matsushima, Yuki Noguchi, Yuma Shin, Zixuan Zhong

cs.RO cs.AIcs.LG ·submitted 2026-11-02 19:00 UTC · v1
code/data

Abstract

AIRoA-0 (A-0) is a bimanual manipulation system learned from 16,151 hours of handheld demonstrations, with no robot data collected at any stage. The demonstrations are recorded with YUBI, our open-source handheld gripper, which lets people record manipulation data anywhere with no robot present. From a single instruction, A-0 sorts more than a dozen small parts into their numbered cells and changes the mop pads and brush of a robot vacuum; among other tasks, it unzips a pencil case and folds a towel. It performs these tasks using only a camera on each wrist, with no head or scene camera, at a site where none of its training data was recorded. Across the ten tasks of our evaluation, it averages a success rate of 78%, against 27% for the strongest of four other vision-language-action models post-trained on the same task demonstrations. We collect no teleoperation data and use no reinforcement learning or on-robot corrections, and the robot appears only at test time. The system learns which regions of each wrist view matter for the task, predicts the stage the task has reached, and decodes actions as a continuous stream. A-0 is embodiment-agnostic: it runs on robots that mount the YUBI gripper, such as a bimanual Franka, TX-G2, OpenArm and UR. We are releasing the dataset, to our knowledge the largest open dataset of handheld-gripper demonstrations with task and subtask instructions, together with the pre-trained weights and the post-training recipe. Videos of A-0 on every task are on the project page, https://a-0.airoa.io. Anyone can build the gripper, record a task of their own and post-train the model on it in under four hours on a single node of eight H200 GPUs.

Comment
18 pages. Project page: https://a-0.airoa.io

Closest papers

Nearest neighbours by meaning across the whole index.

BiDex-100: A Comprehensive Benchmark for Bimanual Dexterous Manipulation Across 100+ Simulation Tasks

cs.RO cs.CVcs.LG ·2026-10-18 ·Yong Wang, Kecheng Zheng, Xing Zhu, Chao Xu, Yujun Shen +1 more
benchmark similarity 0.77
Abstract

Bimanual manipulation with dexterous hands has attracted growing attention in research on robotic action models. However, few studies have developed benchmarks specifically tailored for dexterous manipulation, leaving the dexterous manipulation capabilities of existing models insufficiently characterized. In this paper, we present BiDex-100, a simulation benchmark for bimanual dexterous manipulation that combines broad task coverage, multi-dimensional evaluation, and high-DoF hand embodiments. Concretely, the benchmark comprises 106 tasks organized along five capability axes: generalization, instruction following, limited demonstrations, long horizon, and memory. Each task is paired with an out-of-domain variant featuring controlled visual and spatial changes, allowing systematic assessment of robustness. In addition, the benchmark supports two embodiments and provides 8,080 success-validated teleoperated demonstrations, totaling 6.25 million frames. We evaluate seven recent Vision-Language-Action models under a unified protocol, establishing baselines for capability-specific performance, robustness, and data efficiency. The website is available at https://robbyant-research.github.io/BiDex-100/.

0.52

DexJoCo-X: Benchmarking Action Representations for Multi-Hand Dexterous Manipulation

cs.RO ·2026-10-02 ·Xiangwei Jiang, Yao Mu, Lixin Duan, Wen Li
benchmark similarity 0.74
Abstract · 8 pages, 5 figures. Updated photography illustrations in Fig. 2; text and results unchanged. Project website: https://jxw-wei.github.io/DexJ…

As dexterous hands proliferate, collecting data and training policies separately for every morphology becomes increasingly impractical. Scalable cross-embodiment learning therefore requires a unified representation that captures shared manipulation structure while preserving morphology-specific control. Differences in hands, tasks, datasets, and control interfaces prevent existing studies from isolating the effects of representation, pretraining, and architecture. We introduce DexJoCo-X, a benchmark and toolkit for controlled comparison across seven representative dexterous hands, six single-arm and bimanual tasks, and 2,100 balanced demonstrations. DexJoCo-X provides a matched multi-hand, multi-task protocol with common scenes, success criteria, and execution interfaces, redesigned glove-to-hand mappings, and an automated pipeline that expands reviewed demonstrations across randomized scenes. Using $π_{0.5}$, Ego-Pi, and Being-H0.5, we examine whether a shared action interface is sufficient for multi-hand learning. Expanding $π_{0.5}$ to an 80-dimensional bimanual output yields near-zero success. Ego-Pi preserves the pretrained action head through interleaved prediction and supports per-hand multi-task learning, but remains ineffective for seven-hand joint training. By contrast, Being-H0.5 combines cross-embodiment pretraining, a unified action space, and embodiment-aware experts, enabling one policy to control all seven hands. Within this architecture, function-aligned action slots achieve 47.7% mean success, compared with 47.0% for native coordinates and 33.1% for DexLatent. These results show that cross-embodiment representation depends on the entire learning system: action coordinates, pretraining, and architecture must jointly separate shared manipulation structure from embodiment-specific control.

0.28

HALO: Human-Aligned Data Collection for WhoLe-body MObile Manipulation

cs.RO ·2026-11-12 ·Shuai Yang, Fangyi Xu, Yishu Shen, Kecheng Zheng, Yinghao Xu
code/data similarity 0.74
Abstract

Learning whole-body mobile manipulation requires demonstrations that coordinate bimanual actions with locomotion across extended workspaces. However, existing interfaces trade off direct robot control, perception and action alignment, and natural operator mobility, making such demonstrations difficult to collect. We introduce HALO, a human-aligned data collection system for whole-body mobile manipulation. The system aligns the operator's perception and action space with the robot while preserving direct physical feedback and natural locomotion. Operators guide the robot end-effectors through kinesthetic teaching and move a low-resistance platform without the deployed mobile base while performing bimanual manipulation. This interface enables more natural whole-body demonstrations, but the close human-robot coupling introduces discrepancies between the demonstration and deployment settings. We address these discrepancies with deployment-aligned demonstration processing, which calibrates and temporally aligns platform motion with the deployed base response and masks and inpaints demonstrator hands in recorded observations. Compared with Mobile ALOHA and VR teleoperation, HALO enables up to 2.9x faster demonstration collection while maintaining comparable or higher success rates. Policies trained with HALO perform precise manipulation tasks, including zip-tie fastening, and achieve a 73.3% success rate on a six-stage long-horizon mobile manipulation task involving repeated coordinated base and arm motion. Project page: https://robbyant-research.github.io/Lingbot-ALOHA/

0.26

Human2Dex: Dexterous Robot Learning from Wrist-Centric Human Demonstrations

cs.RO ·2026-10-09 ·Jiachen Zhang, Yuanyuan Li, Shaqi Luo
similarity 0.73
Abstract · 8 pages, 6 figures. Project website: https://human2dex.pages.dev/

Collecting dexterous manipulation demonstrations for each robot hand requires repeated task-specific data acquisition. We ask whether one shared corpus of natural human demonstrations can instead serve as a reusable data interface for different dexterous hands, without collecting task demonstrations on each target robot. We present Human2Dex, a wrist-centric human demonstration interface that separates shared human observation and motion semantics from embodiment-specific execution. It aligns observations through local hand-appearance adaptation and a shared 21-point hand representation with consistent structural semantics across human and robot observations. It constructs executable supervision by retargeting fused human hand motion to each target hand, and introduces the Grasp-Pocket Interaction Representation (GPIR) to express tracked objects relative to a hand-centered Functional Grasp Pocket. The corpus is converted into separate training sets for Linker O6 and Wuji, while action labels, normalization, training, and diffusion-policy checkpoints remain hand-specific. Across six real-world tasks, Human2Dex achieves 109/120 (90.8%) successes on Linker O6 and 97/120 (80.8%) on Wuji. Across both hands, Human-Raw achieves 63/240 (26.3%) successes, whereas the complete Human2Dex configuration achieves 206/240 (85.8%). These results support the use of wrist-centric human demonstrations as a reusable interface across calibrated dexterous hands while retaining embodiment-specific policy learning. The project website is publicly available at https://human2dex.pages.dev/.

0.48

SAKI: Skill Assembly and Kinematic Imitation from Human Videos for Long-Horizon Mobile Manipulation

cs.RO ·2026-09-28 ·Yijie Lu, James Zhao, Weiming Zhi
similarity 0.73
Abstract · 8 pages, 9 figures, 5 tables

Learning from human videos offers a promising route to acquiring diverse manipulation skills. Extending this capability beyond tabletop settings to long-horizon mobile manipulation requires adapting and composing demonstrated interactions across changing scenes and robot configurations. We present Skill Assembly and Kinematic Imitation (SAKI), a framework connecting human-video skill acquisition, cross-demonstration assembly and closed-loop whole-body execution. SAKI prepares reusable object-centric skills that preserve task-critical interactions while allowing transfer paths to adapt. Given a goal and supplied task dependencies, it selects and orders skills, binds their object roles to the current scene, and carries scene estimates and robot configuration between successive skills. Whole-body kinematic imitation generates coordinated base, arm and gripper motion. During execution, persistent object estimates maintain task references across viewpoint changes, while visual feedback updates remaining trajectories. Real-robot experiments demonstrate skill reuse across layouts and the composition of independently demonstrated interactions into continuous mobile tasks, including tidying and wiping. Ablation results show that task-conditioned reference preparation substantially improves long-horizon task completion with whole-body optimisation and visual feedback held fixed. Check https://aus.bot/research/saki/ for video demos!

0.30

What Novice Operators See Changes What the Policy Learns: A User Study of Keypoint Hand Visual Representation for Teleoperated Demonstration

cs.RO cs.HC ·2026-10-20 ·Amane Yamaguchi, Shohei Kamiguchi, Masashi Hamaya, Shigeo Yoshida, Takuji Narumi +1 more
code/data similarity 0.73
Abstract · 9 pages, 8 figures, 2 tables

Imitation learning increasingly relies on novice operators, whose demonstrations fall short of experts' in number and inter-trial consistency. Operators act on what they are shown, yet how the rendering of the robot affects their demonstrations, and the policies trained on them, has not been examined. We study this question with PointHand, a teleoperation interface that renders a multi-fingered robot hand as sparse keypoints at its fingertips and joints, the same keypoints a policy can observe. In a simulated mug-in-box task, 18 novices and 4 experts collected 2,200 trials under three renderings: the real shape of the hand, all keypoints emphasized, or the thumb and index finger alone emphasized. The novices shown the thumb and index finger emphasized collected 441 successful demonstrations from 600 trials, against 320 for those shown the real shape. We then trained diffusion policies on these demonstrations, replacing the scene point cloud and proprioceptive state they observe with the hand keypoints and two object keypoints. Within 400 steps these demonstrations went from the weakest of the three novice conditions under the point-cloud policy (46.3%) to the strongest under the keypoint policy (57.3%), a gain of +11.0 percentage points in all five seeds. Those collected with all keypoints emphasized changed by at most +0.7 percentage points, and in no more than three seeds. The value of a demonstration therefore depends on the rendering shown during collection and on what the policy observes together. A shared representation can pay off on both sides, in the number of successful demonstrations and in the success rate of the policy trained on them. Project page: https://omron-sinicx.github.io/point-hand/

0.21

Embodied Task Agents Can Perform Fine Manipulation through Tactile In-Context Learning

cs.RO ·2026-10-20 ·Yubang Wang, Zezheng Huai, Yifei Zhang, Jinhao Wu, Yitong Chen +6 more
code/data similarity 0.73
Abstract · 24 pages. Project page: https://no-518.github.io/tactile-eta/

Can embodied task agents use tactile experience to perform fine manipulation without task-specific model training? We investigate this capability through Tactile-ETA, a system that incorporates tactile experience into an embodied task agent through in-context learning. Successful expert demonstrations show how contact changes during manipulation. We pair each recorded robot movement with its camera views and bilateral tactile observations. We keep tactile observations at the start and end of each movement and add two neighboring time points when the tactile images change markedly in between. The agent combines these demonstrations with current vision, tactile observations, and proprioception to select actions through general-purpose robot tools, without updating model parameters. Across four simulated manipulation tasks, adding tactile observations to the same two expert demonstrations increases average success from 15.75% to 24.00%, with current sensing and execution interfaces held fixed. Further experiments show that performance depends on the sensory content and representation of demonstrations, while comparing agent models on Lift Bottle reveals substantial differences under the same system configuration. On the real-robot tasks, demonstrations with aligned visual and tactile observations increase the task success rate from 0% to 60%. These findings demonstrate the feasibility of using tactile experience in context for fine manipulation and suggest a path toward extending embodied task agents to additional sensory inputs.

0.46

HandsOn: A Large-Scale Simulation Benchmark for Generalizable Dexterous Manipulation

cs.RO ·2026-10-19 ·Tianwei Luo, Yiming He, Hongjin Wu, Ting Pan, Debin Ren +12 more
benchmark similarity 0.73
Abstract · 56 pages, including appendices

General-purpose manipulation requires reliable behavior across embodiments, objects, and task demands. We introduce HandsOn, a composable simulation platform and benchmark for cross-embodiment dexterous manipulation. It supports five robotic arms, six dexterous hands, and approximately 200 rigid, articulated, and deformable assets in randomized scenes. The benchmark pairs 18,000 curated human demonstrations with 66 human-verified tasks: Core-50 supports demonstration-based learning and execution tests, while Transfer-16 evaluates asset and relation transfer, skill composition, and deformable manipulation without target-task training demonstrations. Qualitative real-robot rollouts illustrate sim-to-real transfer. Across diffusion, vision-language-action, world-action, and prompted VLM-based methods, the best trained multi-task policy achieves 29.1% Core-50 success. Without benchmark finetuning, GPT-6 using move_eef for palm-and-finger control achieves 5.2% on Core-50 and 1.9% on Transfer-16 over 660 trials. Trained-policy stage diagnostics expose failures in contact establishment, action coordination, and maintaining achieved goals, with additional sequencing errors in composed tasks. HandsOn provides a shared basis for investigating manipulation generalization and the limits of reliable physical interaction.

0.51