CS Paper Radar

HybridSpec: Throughput-Aware Speculative Decoding for Hybrid GDN-MoE Models

Haiyu Wang, Sai Qian Zhang, Zechun Liu, Steven Li

cs.AI cs.LG ·submitted 2026-11-02 22:58 UTC · v1

Abstract

In speculative decoding, parallel drafters such as DFlash make drafting cheap, so target verification dominates each round. A central choice is the verification length, the number of tokens that the target processes in each round. Verifying more draft tokens can accept more of them, but work after the first rejection is wasted. For hybrid target models that combine Gated DeltaNet (GDN) and mixture-of-experts (MoE) layers, verification time grows much faster with this length than for dense models. In a single-request profile of Qwen3.6-35B-A3B with DFlash, it grew by 71% from length 4 to 16, almost entirely in GDN and MoE layers, compared with 4%-6% for a dense Qwen3-4B target. Each GDN layer must update a recurrent state at every token and recover it at the end of the accepted prefix. The MoE cost depends on the experts that the tokens activate, which are known only once verification runs. We present HybridSpec, which selects the verification length on the GPU from draft-side acceptance estimates and measured target latency. Verification then runs this length plus one extra token up to the first MoE router, before any expert runs. There, a lightweight routing correction uses the observed expert assignments to decide whether to keep that token. The rest of verification runs only on the selected tokens. Block-parallel GDN kernels avoid storing a state after every token and reconstruct the accepted state of every GDN layer in one launch. In isolated benchmarks at verification lengths 4 to 16 with every draft token accepted, these kernels, including accepted-state reconstruction, are $1.54\times$-$4.04\times$ faster than the default kernels. With three GDN-MoE target models in single-request greedy decoding, HybridSpec is $1.75\times$-$1.88\times$ faster than autoregressive decoding and $1.30\times$-$1.33\times$ faster than DFlash.

Closest papers

Nearest neighbours by meaning across the whole index.

D3D: Decoupled Diffusion Drafting for Asynchronous Speculative Decoding

cs.AI cs.LG ·2026-11-04 ·Baoyou Chen, Ruiqiao Mei, Guancong Lin, Tao Song, Weihao Yuan +2 more
code/data similarity 0.77
Abstract

Target-conditioned diffusion drafters predict candidate tokens in parallel, yet each new block must wait for updated target-model hidden states. This forces drafting and verification to run sequentially, limiting speedup even though each block is generated in one pass. We introduce D3D, a standalone diffusion drafter that removes this inter-round dependency. D3D combines blockwise denoising with auxiliary autoregressive supervision to achieve long accepted prefixes without target hidden states. This independence lets D3D draft successor blocks during verification in one packed pass, enabling asynchronous speculative decoding. We progressively prune layers according to their effect on acceptance length to reduce the cost of packed drafting. Removing five of 36 layers retains over 99\% of mean acceptance length across three benchmarks with Qwen3-8B as the target. Across seven benchmarks, D3D averages 5.00$\times$ and 5.71$\times$ decoding speedup with Qwen3-8B and Qwen3-32B targets, compared with 4.03$\times$ and 3.67$\times$ for DFlash. On GSM8K with Qwen3-32B, speedup reaches 7.48$\times$. Code is publicly available at https://github.com/fudan-generative-vision/D3D.

0.37

Why Speculative Decoding Works Better Than Predicted on Sparse MoE Models

cs.LG cs.AI ·2026-10-28 ·Ekagra Ranjan, Komal K. Teru, Bharat Venkitesh, Acyr Locatelli
top venue similarity 0.76
Abstract · Accepted as at NeurIPS 2026 main track conference

Speculative decoding (SD) accelerates autoregressive inference by leveraging the memory bound nature of decoding, verifying multiple draft tokens in a single forward pass. For mixture-of-experts (MoE) models, prior work predicts a concave speedup-batch size relationship, with gains peaking at intermediate batch sizes due to expert saturation. We evaluate this across 10 sparse MoE models (30B--1T parameters, 8--512 experts) and find recent fine-grained models break this trend, showing higher speedup at low batch size. We find verification cost is governed not only by activated-expert bytes, but also by temporal overlap across draft tokens and GPU execution dynamics. At low batch size, MoE layers in fine-grained models account for a much smaller share of runtime than of weights; on H100, kernel profiling attributes this mainly to higher bandwidth utilization of MoE kernels relative to attention, with L2 absorbing repeated reads of co-routed experts. Across draft tokens, routing overlap further reduces the unique experts activated during verification relative to independence assumptions. We model this effect using a maximum-entropy Iterative Proportional Fitting (IPF) framework that predicts unique expert counts from routing-overlap statistics with less than 4\% error, and substantially narrows the gap to real-model curves and captures the qualitative low-batch trend from synthetic routing.

0.32

ChainFlow: Few-Step Latent Flow Matching for Speculative Decoding

cs.AI cs.CL ·2026-11-05 ·Selim Aktas, Yusuf Erdem Erdem, Ahmed Zeer, Himmet Toprak Kesgin, Muzaffer Kaan Yuce +1 more
code/data similarity 0.75
Abstract

Speculative decoding has become a standard way to accelerate LLM inference: a lightweight drafter proposes tokens that the target verifies in one parallel pass. Existing drafters face trade-offs that limits their speedups: autoregressive drafters generate tokens one at a time, so drafting cost grows with draft length, while diffusion drafters generate tokens in parallel but predict each position independently, ignoring inter-token dependencies. We introduce ChainFlow, a new speculative decoding paradigm and the first flow-matching drafter conditioned on the target's hidden states. ChainFlow treats drafting as a short transport over hidden states, needing one or two flow steps instead of the many denoising steps of generation from noise. A variational autoencoder compresses these states so drafting cost barely grows with target size, lightweight feedback heads restore inter-token dependencies, and tree drafting raises acceptance. On Qwen3.5 models, at matched drafter size and training data, ChainFlow outperforms EAGLE-3 and DFlash in vLLM by 39% and 11%, respectively. These gains further widen as drafters are adapted to new languages sequentially. Our ablations cover drafter design and concurrent serving, and we open-source our code and drafter models.

0.16

When Parallel Drafter Meets Parallel Speculative Decoding

cs.CL ·2026-09-23 ·Fuliang Liu, Xue Li, Kun Qian, Zhibin Wang, Wanchun Dou +2 more
similarity 0.75
Abstract

DSpark-style parallel drafters have made speculative decoding highly effective, yet their draft phase remains serialized on the critical path of every round. Parallel speculative decoding (PSD) overlaps drafting with verification, yet existing methods must guess the accepted prefix and bonus token in advance: a wrong guess reverts the whole batch to serial drafting. We present DPara, a PSD framework that reuses effective parallel drafters yet guarantees backbone--verification overlap in every round, thereby eliminating this probabilistic fallback altogether. While the target verifies, DPara's diffusion backbone precomputes draft representations for every acceptance boundary with the bonus left unspecified; a lightweight autoregressive head then combines the revealed verification outcome with the matching precomputed representation to emit the next round's draft tokens almost instantly---fully parallelizing the dominant backbone forward with verification and leaving only the negligible head cost serial. Experiments on Qwen3-8B and Qwen3-14B across seven math, coding, and chat benchmarks show that DPara achieves average speedups of $3.21\times$ and $3.52\times$ over autoregressive decoding, surpassing the strongest serial and parallel speculative decoding baselines alike.

0.44

SpecFit: Not All Draft Tokens Cost the Same in Offloaded MoE Inference

cs.AI ·2026-10-11 ·Hongliang Cao, Xiuyu Li, Siqi Wang, Ziming Wang, Jingmin Zhu +1 more
code/datahighly cited similarity 0.74
Abstract

Mixture-of-experts (MoE) models activate only a few experts per token, but when their expert weights are offloaded to host memory, host-to-device (H2D) expert transfers enter the critical path of decoding. Speculative decoding verifies several draft tokens in one forward pass, yet in an MoE model each verified token activates its own experts, so a larger draft tree transfers more experts. Because of this H2D cost, speculative decoding commits several tokens per verification cycle yet is sometimes even slower than autoregressive decoding. Based on this observation, we propose SpecFit, which chooses the verified draft subtree to maximize predicted throughput rather than acceptance length. SpecFit estimates the expected number of committed tokens from draft path probabilities and predicts cycle time from the node count and the per-layer union of the experts the subtree activates; this union is a monotone submodular coverage function, so each node pays only for the experts it adds. An exact search over ancestor-closed subtrees returns the subtree with the highest predicted throughput; run after each draft level, the same search also decides when to stop drafting, and the unmodified target verifies the result. On CNN/DailyMail summarization and a GSM8K subset with Qwen3-30B-A3B, SpecFit decodes 21.6% and 7.0% faster than EAGLE-3 with the same expert cache and 1.97x and 1.72x as fast as vanilla EAGLE-3. Code is available at https://github.com/Chlience/SpecFit.

0.53

NarrowSpec: Draft Hidden Width Need Not Match the Target in Speculative Decoding

cs.CL cs.LGcs.PF ·2026-11-18 ·Alagappan Valliappan, Ankit More, Dheevatsa Mudigere, Jatin Mitra
similarity 0.74
Abstract · 29 pages, 6 figures, 33 tables

Speculative decoding is widely used to speed up generation in large language models (LLMs), with a small draft model proposing tokens that one forward pass of the target model verifies. Draft models that read the target's hidden states, such as DFlash and EAGLE-3, typically inherit the target's hidden width. We show that the draft's whole residual stream can run at half or a quarter of that width while largely preserving acceptance. For DFlash, which borrows the target's vocabulary projection, the trained output adapter folds into it, giving one narrower projection with logits unchanged up to floating-point rounding. We test two drafter families, DFlash and EAGLE-3, on two targets, Qwen3-8B (NVFP4) and GPT-OSS-20B (MXFP4), in SGLang on a B200 and a DGX Spark (GB10). At batch size 1 and temperature 0, narrowing the draft to half or a quarter width speeds up end-to-end decoding by 1.06-1.12x on B200 and 1.13-1.44x on GB10. The speedup holds at larger batch sizes. From batch 32 to the largest batch each GPU fits, narrowing reaches up to 1.21x on both GPUs, and no narrow draft is slower than full width.

0.17

Reciprocal Guidance: Orchestrating Draft and Verify Budgets for Advancing the Diffusion-AR Self-Speculation Frontier

cs.CL ·2026-09-28 ·Linye Wei, Shutian Zheng, Haoyu Zeng, Meng Li
similarity 0.73
Abstract

Diffusion drafting with autoregressive (AR) verification has emerged as a promising paradigm for efficient speculative decoding. Recent self-speculation models, represented by Nemotron-Labs-Diffusion, further simplify the speculative pipeline by unifying drafting and verification within a shared backbone, while enabling longer acceptance lengths. However, the Pareto frontier between aggregate and per-request throughput remains underexplored. At low concurrency, sequential draft-verify execution requires two model forward passes per round, limiting the effective tokens per forward (TPF). By contrast, at high concurrency, longer drafts incur increasingly expensive computation, forcing individual requests to operate under constrained speculation budgets and preventing full exploitation of the full-backbone drafter. Our key observation indicates that drafting and verification exhibit reciprocal predictability. Draft logits can anticipate likely verification mismatches, while recent verification outcomes predict future drafting utility and suitable block sizes. Building on this observation, we introduce Reciprocal Guidance (RecGuide), a runtime draft-verify orchestration framework that adapts speculative decoding to varying serving loads. RecGuide exploits spare compute capacity through verification-overlapped drafting at low concurrency, while dynamically allocating request-specific draft block sizes as the workload becomes increasingly compute-intensive. Experiments across a wide range of concurrency levels demonstrate consistent throughput improvements over vanilla self-speculation, achieving up to $1.8\times$ speedup.

0.15

APEX: Speculate smarter, not deeper

cs.CL cs.LG ·2026-10-06 ·Manvi Jha, Zach Zhang, Zhichao Xu, Linbo Liu, Sai Muralidhar Jayanthi +1 more
similarity 0.73
Abstract

Speculative decoding reduces large language model inference latency by drafting multiple tokens before target-model verification, but its effectiveness depends on both the proposal mechanism and draft depth. Fixed configurations cannot respond to changes in predictability, repetition, and acceptance during generation, so deeper drafting can increase wasted computation without proportional speedup. We introduce APEX, a learned controller that balances decoding speed and draft-token waste through request-level expert selection and block-level depth adaptation. APEX-Router selects among EAGLE-3, n-gram, and draft-model speculation for each request, while APEX-Depth adjusts draft length at each verification block using causal decoding signals and recent verifier feedback. APEX models accepted draft length as censored survival feedback, learning position-wise rejection hazards, block execution costs, and an action utility that balances throughput, accepted progress, and wasted tokens. This allows the controller to adapt speculation while retaining the target model's verification procedure. We integrate APEX into vLLM and evaluate it with Qwen3-8B across six workloads, achieving up to 5.24X speedup over autoregressive decoding. Across the aggregate evaluation, APEX-S achieves 4.27X speedup, while APEX-B achieves 3.27X speedup with a 41.0% relative reduction in wasted-token percentage compared with fixed n-gram speculation at k=16, providing distinct operating points for balancing acceleration and draft-token utilization.

0.13