CS Paper Radar

FP4Quant: Efficient 4-Bit Communication Compression for Model-Parallel LLM Training

Man Liu, Xingchen Liu, Hairui Zhao, Guangming Tan, Dingwen Tao

cs.AI ·submitted 2026-11-03 05:03 UTC · v1
published

Abstract

The rapid scaling of large language models (LLMs) has made communication overhead a critical bottleneck in distributed model-parallel training. Although existing low-precision compression methods can effectively reduce communication costs, further reducing the communication footprint to ultra-low-bit formats such as FP4 introduces new challenges, including limited numerical range, sub-byte storage overhead, and increased computational cost from fine-grained quantization. In this paper, we present \textbf{FP4Quant}, a micro-grouped FP4 compression framework for efficient model-parallel LLM training. FP4Quant integrates a micro-grouped dual-scale FP4 quantization mechanism to preserve local tensor distribution characteristics, a warp-cooperative FP4 packing scheme to enable efficient sub-byte data representation, and a hybrid two-level FWHT pipeline to mitigate quantization errors with GPU-aware execution optimization. Experiments on NVIDIA H100 GPUs with Qwen-7B demonstrate up to 1.56$\times$ end-to-end throughput improvement over BF16, revealing a trade-off between throughput and model quality.

Comment
5 figures, 3 tables, accepted by IFIP NPC 2026

Closest papers

Nearest neighbours by meaning across the whole index.

AlignQuant: Tile-Aligned Mixed-Precision Quantization for Efficient LLM Generation

cs.LG cs.AIcs.CL ·2026-10-05 ·Hanzhi Zhang, Qiao Zhang, Qinglei Cao, Heng Fan, Yan Huang +2 more
code/data similarity 0.74
Abstract

Fine-grained mixed-precision quantization promises efficient large language model inference, but local precision choices can conflict with regular GPU storage and computation units. This precision-boundary mismatch limits the translation of compression into practical acceleration. We introduce AlignQuant, a post-training quantization method that uses GPU-compatible two-dimensional weight tiles as the common unit of precision allocation, compact storage, and execution. This shared partition lets precision follow sensitivity within output channels. Joint prefill/decode calibration scores precision reductions using projection-output perturbations weighted by language-model loss gradients under quantized activations. Phase-normalized scores prioritize higher precision for tiles important to either phase under a model-wide weight-storage budget. Each tile stores one selected representation, while phase-specialized kernels reuse the packed model and expand lower-bit weights for INT8 computation with 8-bit activations. Across four LLMs spanning 3B to 14B parameters, AlignQuant achieves up to $2.50\times$ generation speedup over BF16 while preserving model quality. Evaluations further cover three GPUs and contexts up to 64K tokens. These results show that local precision flexibility and regular GPU execution can coexist through a shared tile unit. The implementation is available at https://github.com/HanzhiZhang-Ulrica/AlignQuant.

0.34

PACT: NVFP4 Data-Flow LoRA Fine-Tuning on Consumer GPUs

cs.LG ·2026-10-18 ·Lei Gao, Hossein Entezari Zarch, Chaoyi Jiang, Murali Annavaram
similarity 0.73
Abstract

Fine-tuning language models on consumer GPUs is constrained by computation and memory. Although LoRA reduces trainable parameters and optimizer state, frozen projections remain expensive, and activations retained for backward can dominate memory usage. We present PACT, a LoRA fine-tuning system that accelerates frozen projections with native NVFP4 GEMMs while reducing quantization and dequantization overhead and limiting quantization error. To reduce activation memory, PACT reuses quantized RMSNorm outputs and saves gate/up activations in NVFP4 for backward. To limit numerical error, it preserves BF16 inputs for forward nonlinear operations and calibrates frozen weights offline using GPTQ adapted to NVFP4 scales and quantized activations. Fused nonlinear kernels and cached forward and backward weight layouts reduce quantization and dequantization overhead. Evaluations across multiple models and tasks on a 16\,GB RTX~5080 show lower memory usage and faster LoRA fine-tuning with competitive accuracy, enabling model adaptation on resource-constrained consumer hardware.

0.18

BitDecoding-FP4: Native FP4 KV Cache Decoding via Algorithm-System Co-Design

cs.AI cs.ARcs.CLcs.PF ·2026-11-06 ·Dayou Du, Woon Yee Ng, Guangming Sheng, Nick Lau, Jianyi Cheng +1 more
code/data similarity 0.73
Abstract

The key-value (KV) cache dominates memory capacity and bandwidth in long-context LLM serving. While 4-bit microscaling formats (NVFP4, MXFP4) shrink the cache and run attention on FP4 Tensor Cores, a fundamental gap remains between algorithmic quantization and system-aware acceleration: existing FP4 KV systems use vanilla quantization that causes severe accuracy drops, whereas accuracy-oriented 4-bit algorithms rely on vector codebooks whose lookup overhead degrades decoding throughput. We present BitDecoding-FP4, an algorithm--system co-design for accurate and efficient native FP4 KV decoding. We mitigate three error sources: Dual-Residual Query Quantization splits queries into two FP4 tensors, cutting query logit error from 60% to 1%; Underflow-Aware Probability Scaling prevents E4M3 scales from rounding long-context probabilities to zero; and Outlier-Aware Key Quantization combines static smoothing, Hadamard rotation, and scale search to suppress key outliers under token-wise scaling. At the system level, we remove the softmax bottleneck via transposed softmax with fused probability quantization and stacked query MMA on paged KV caches. Across dense and MoE models with GQA and MLA, BitDecoding-FP4 stays within 0.5 points of BF16 KV accuracy with NVFP4 (1 point with MXFP4), and tracks BF16 KV in RL training rollouts. In end-to-end serving on NVIDIA B300 with Qwen3-4B and Qwen3-30B-A3B, it delivers 2.4-3.0$\times$ higher peak serving throughput than BF16 KV. The implementation is available at https://github.com/OpenBitSys/BitDecoding-FP4.

0.43

Training an MoE LLM in MXFP4: How We Closed the Gap to BF16

cs.AI ·2026-10-23 ·Han Wang, Zhitao Wang, Natalia Frumkin, Xuanwu Yin, Alireza Khodamoradi +2 more
benchmarkcode/data similarity 0.73
Abstract

Training large language models (LLMs) in sub-8-bit arithmetic promises substantial gains in memory bandwidth and compute throughput, yet FP4 formats introduce quantization error severe enough to destabilize optimization if left unaddressed. We present ALTO, an open-source training recipe for GPT-OSS-20B, a 20-billion-parameter mixture-of-experts (MoE) model, on the MLPerf Small MoE Training benchmark under the MXFP4 microscaling format. The recipe combines established techniques from Abecassis, Felix et al. [arXiv:2509.25149] (hybrid 1D/2D block quantization, randomized Hadamard transforms, and stochastic rounding) with a simplified weight de-oscillation scheme adapted from TetraJet-v2 [arXiv:2510.27527]. On C4 validation at global batch size 16, MXFP4 + RHT + SR + de-oscillation reaches a validation loss of 3.3350 at 16,128 steps, only 0.007 above the BF16 baseline (3.3283), closing roughly 50% of the gap left by MXFP4 without de-oscillation (3.3418). Measured by steps to reach the MLPerf quality target (validation loss 3.34), de-oscillation cuts the FP4 convergence overhead relative to BF16 from +20.0% to +5.0%. We also report negative end-to-end results from differential gradient estimation, outlier clipping, and macro-block scaling, despite each showing operator-level SNR gains. All experiments use simulated MXFP4 kernels on AMD MI300X hardware and wall-clock speed has not been optimized.

0.26

MXCode: Vector Quantization for MX-Native Inference at Scale

cs.LG ·2026-10-30 ·Gaurav Kolhe, Cansu Demirkiran, Shubhi Tyagi, Sulaiman Sadiq, Boyao Wang +6 more
similarity 0.72
Abstract

Memory capacity and bandwidth are major bottlenecks in LLM inference, motivating weight compression beyond conventional 4-bit quantization. Vector quantization (VQ) enables approximately 2-bit weight storage but often relies on codebooks incompatible with native FP4 computation. We introduce MXCode (MX-Native Codebook Quantization), a framework bridging ultra-low-bit VQ compression with MicroXcaling (MX)-native FP4 computation. MXCode proposes three strategies: PostScale, which quantizes learned codebooks to MXFP4; PreScale, which extracts MX scales before codebook learning; and PreScale+, which further compresses these scales using VQ. These strategies explore tradeoffs among quantization quality, scale overhead, and codebook granularity. All reconstruct MX-native W4A4 operands without materializing intermediate high-precision weights. We evaluate MXCode on Qwen3 (235B), DeepSeek-R1 (671B), and GLM-5.2 (753B) using the Microsoft MX Emulation Library. MXCode achieves approximately 2 bits per weight with competitive, workload-dependent model quality. On GB300 hardware, experiments with Qwen3 (235B) show approximately 50% lower model-load memory than Native FP4 while maintaining near-Native-FP4 serving throughput. Under memory-constrained prefix reuse, P90 TTFT improves by up to 94.5%. These results demonstrate software-based reconstruction on existing FP4 hardware and inform the development of future MX-native inference systems.

0.14

SoScale: Second-Order Scale Search for FP4 Quantization

cs.LG cs.AI ·2026-11-12 ·Pengxiang Zhao, Xing Li, Hui-Ling Zhen, Weizhe Lin, Xianzhi Yu +1 more
similarity 0.71
Abstract

Low-bit quantization reduces the memory footprint and inference cost of large language models (LLMs), yet accurate FP4 quantization remains challenging. Practical formats such as MXFP4, NVFP4, and HiF4 pair a 4-bit floating-point payload with block-wise or hierarchical scale codes, making accuracy highly sensitive to how each local distribution is scaled. Default maximum-absolute-value scaling preserves dynamic range, but can spend scarce FP4 levels on rarely occupied outlier regions and leave dense tensor values poorly resolved. Existing scale-search methods minimize local element-wise reconstruction error, optimizing tensor fidelity rather than layer-output fidelity. We propose SoScale, a second-order weight scale-code search method for hierarchical FP4 quantization. SoScale searches hardware-valid scale codes under a Hessian-aware layer reconstruction objective and couples this search with GPTQ-style error recovery, selecting scales by their impact on layer outputs. Across Qwen3 models, SoScale consistently reduces downstream quantization degradation under MXFP4, NVFP4, and HiF4.

0.04

ResServe: Accurate and Efficient FP4 LLM Inference with Residue Compensation

cs.DC ·2026-11-05 ·Shuo Rong, Ruibo Fan, Jiawen Wen, Xiaowen Chu
code/data similarity 0.70
Abstract · 26 pages, 20 figures, 9 tables, including appendices. Code: https://github.com/ShawRong/resserve

Block-scaled 4-bit floating-point (FP4) quantization reduces large language model inference costs but can degrade task quality. Higher-precision computation can mitigate this loss at the expense of some of the efficiency gains from FP4 inference. Narrow matrix computations common in decoding often leave spare hardware capacity for low-cost precision recovery. ResServe combines an FP4 activation base with an FP4-quantized residue representing information lost during quantization. It uses this spare capacity to compute the residue's contribution and combines results on-chip, avoiding extra result transfers. We apply this principle to linear layers and decode attention, while selective compensation limits added work when processing input prompts. On NVIDIA B200, compensated linear kernels using the NVFP4 format improve numerical precision while retaining latency close to uncompensated execution for the evaluated operations with few rows. In the evaluated NVFP4 inference configurations, ResServe adds at most 3.4% request-latency overhead over W4A4 and reduces request latency by 22.4-53.3% relative to W4A8. Across five models, code-generation accuracy improves over same-format uncompensated inference, with mean relative gains of 15.04% for NVFP4 and 53.57% for MXFP4.

0.39

OSFP4: Joint Optimization of Diagonal Smoothing and Block Scales for NVFP4 Quantization

cs.AI cs.IT ·2026-10-06 ·Neriah Ben David, Ori Meir, Or Ordentlich
code/data similarity 0.70
Abstract

NVFP4 is an attractive datatype for large language model (LLM) inference, offering compact storage and native tensor-core acceleration. However, preserving accuracy using NVFP4 requires careful quantization. In this work we develop a novel quantization scheme called Optimized Smoothing and Scaling for NVFP4 (OSFP4). For each linear projection it uses a diagonal smoothing matrix whose entries are optimized to minimize the squared matrix-product quantization error under NVFP4, taking into account the rounding procedure that is used (either round-to-nearest, or GPTQ-style successive interference cancellation). This requires performing joint optimization on the smoothing entries as well as the block scales, which is facilitated by analyzing a multiplicative-dither FP4 quantizer instead of the fixed deterministic one. Experiments show that OSFP4 achieves the highest average accuracy among the evaluated competitors in the corresponding quantization settings, while retaining approximately 94-97\% of vendor NVFP4 prefill throughput on the measured workloads. Our code is available in https://github.com/neriahbd/OSFP4

0.42