CS Paper Radar

Spectrally Routed Diffusion Policy for Multi-Task Robotic Manipulation

Mingcong Li, Yihan Zhou, Jiayu Qu, Xueyang Guo, Yilin Mo

cs.RO ·submitted 2026-11-03 08:09 UTC · v1
top venue

Abstract

Diffusion-based policies have achieved strong performance on single-task robotic manipulation. However, a single model trained jointly on multiple tasks consistently underperforms the per-task specialists trained on the same demonstrations. We focus on two challenges. First, the convolutional encoders commonly used in diffusion-based policies produce visual conditions that are not discriminative enough. Second, gradients from incompatible action modes update the shared denoiser's dense parameters along the same directions, causing destructive interference during joint training. To address both, we propose SR-DP (Spectrally Routed Diffusion Policy). A frozen VGGT encoder with a spatial-compression adapter produces compact multi-scale semantic-geometric tokens, a task-discriminative visual condition for tasks that share a workspace. We first train the denoiser as a standard diffusion policy, then decompose selected linear layers by SVD into a frozen basis of orthogonal rank-one experts, adapted through spectral routing and Householder input rotations. On six RoboTwin tasks, SR-DP averages a 68.4% success rate, surpassing multi-task VO-DP by 21.8 points and the strongest per-task baseline by 3.8 points. On four real-world bimanual tasks, Stage 2 reaches a 43.0% average success rate and improves over Stage 1 by 19.0 points.

Comment
8 pages. Accepted for publication in IEEE Robotics and Automation Letters (RA-L)

Closest papers

Nearest neighbours by meaning across the whole index.

TAPESTRY: A Single Backbone for Video Generation and Robot Control

cs.RO cs.AIcs.CVcs.LG ·2026-10-27 ·Jeremy A. Collins, Seungjae Lee, Rachanon Wachakorn, Krishnan Srinivasan, Animesh Garg +2 more
published similarity 0.73
Abstract · Accepted to Conference on Robot Learning (CoRL) 2026

Pretrained video generation models encode rich priors about physical interactions, but leveraging them for robot control typically requires either resource-intensive video generation at test time or action heads trained from scratch that do not fully utilize the pretrained backbone. We introduce Tokenizing Actions as Video Patches in a Shared Transformer Policy (TAPESTRY), a world action model that repurposes a pretrained video diffusion transformer into a robotic policy without requiring video generation at inference. Our key idea is to treat robot actions as single-patch tokens in the video model's latent space. A lightweight linear projection maps each action timestep to the patch dimensions of the pretrained VAE, and the resulting tokens are processed by the same patchifying layers and transformer backbone used for video. The shared backbone is optimized through three diffusion objectives sampled per minibatch element: Video diffusion uses VAE latents from robot and human videos to establish dynamics priors. Joint video+action diffusion trains on robot demonstrations using a coupled diffusion timestep and an asymmetric attention mask. Action-only diffusion denoises actions conditioned on clean image latents. At test time, the model generates a compact action token sequence in a single DDIM step from pure noise, producing smooth action chunks at 84 ms per action chunk on consumer hardware and avoiding the cost of full video generation. Across simulation benchmarks and real-robot experiments, TAPESTRY achieves strong performance with substantially lower inference cost than comparable joint video--action policies. More information can be found at https://tapestry-wam.github.io.

0.22

JAMB: Joint Action-Motion Diffusion for Bimanual Manipulation

cs.RO ·2026-09-21 ·Chuyang Xiao, Peilin Meng, David Held
similarity 0.72
Abstract

Coordinated bimanual manipulation is challenging because the motion of either arm can alter the shared 3D scene and thereby affect the other arm. Yet most diffusion policies generate actions without explicitly modeling these future geometric consequences, while predictive variants typically use future state only as auxiliary supervision or fixed conditioning. We address this limitation by proposing JAMB, a diffusion policy that jointly denoises bimanual actions and future 3D point tracks. By allowing action and track hypotheses to evolve together within a shared Transformer, each can inform and refine the other throughout denoising. We further ground multimodal representations in a shared spatiotemporal coordinate system to facilitate geometry-aware interaction during joint denoising. We evaluate JAMB on diverse bimanual manipulation tasks in RoboTwin 2.0 and on a real-world robot, comparing it with action-only policies and alternative future-prediction approaches spanning different state representations and learning objectives. Across 16 simulation tasks, JAMB achieves an average success rate of 83.4%, outperforming the strongest baseline by 23.9 percentage points. On three real-world tasks, it outperforms the action-only and auxiliary geometry prediction methods by 50.0 and 21.2 percentage points, respectively. Beyond these performance gains, JAMB shows stronger generalization to cluttered scenes and out-of-distribution backgrounds than the evaluated baselines. Together, these results demonstrate the effectiveness of our joint action-motion modeling framework for coordinated bimanual manipulation. Our project website is available at https://jam-bimanual.github.io/

0.28

MOSAIC: Mode- and Support-Aware Inference-Time Control of Robot Diffusion Models

cs.RO ·2026-10-12 ·Sabrina Bodmer, Rahel Rickenbach, René Zurbrügg, Melanie N. Zeilinger, Colin Jones
similarity 0.72
Abstract

Generative policies such as diffusion models provide expressive data-driven priors for robot behavior, yet the situations a robot faces at execution time rarely match its training data and impose constraints and objectives the policy never learned. Existing inference-time guidance methods either rely on gradients that can push samples away from the learned prior, or on sampling procedures that can be inefficient, collapse modes, or average them into out-of-distribution predictions. We introduce MOSAIC, a mode- and support-aware framework for gradient-free inference-time control of robotic diffusion models. MOSAIC treats the initial noise and all stochastic reverse-step perturbations as a joint input to the pretrained denoising process and adapts a distribution over this input using importance weights computed from fully denoised outputs. Physical feasibility and consistency with the learned support are balanced using adaptive penalties, while mode-wise importance-weighted updates preserve modes and avoid destructive averaging. The same formulation can jointly steer multiple independently trained diffusion models through shared coupling costs, enabling coordinated behavior without requiring a joint model. We evaluate MOSAIC on navigation, dexterous grasping, motion planning with unseen geometry, and collaborative box manipulation with independently trained robot priors. Across these settings, MOSAIC adapts and composes frozen diffusion priors under new deployment constraints without retraining.

0.39

Vision-Language Models Are Joint Denoisers in Robotic Action Generation

cs.RO cs.AIcs.CV ·2026-10-31 ·Xicheng Gong, Wenxuan Song, Chengze Liu, Qiwei Li, Qize Yu +3 more
similarity 0.71
Abstract · formatting error

Diffusion-based vision-language-action (VLA) models cascade pretrained vision-language models (VLMs) with diffusion action experts, but typically restrict the VLM to providing static conditioning. This separation limits how much pretrained perception and reasoning can guide action generation, especially in out-of-distribution settings. We introduce JADE, a Joint Action DEnoiser that enables the VLM and action expert to jointly refine actions. Our key insight is that structured action latents allow the VLM to read the current noisy action together with visual observations and language instructions. At every denoising step, the VLM contextualizes the noisy action and guides the action expert through gated cross-attention, so that its guidance evolves with the action being generated. We further supervise the VLM to recover clean action latents from noisy ones, which gives it a direct action-learning signal and couples perception with control. Additionally, joint denoising enables JADE to generate actions with fewer sampling steps, helping offset the additional cost of VLM participation. An adaptive step-size schedule further balances task performance and inference latency. On RoboDojo, JADE achieves an average success rate of 12.67%, the highest among the evaluated $π_{0.5}$-based methods, and is competitive with recent VLA and WAM foundation models pretrained at scale. It also improves performance on RoboTwin 2.0 and raises the average success rate across four real-world bimanual tasks by 20.8 percentage points compared with $π_{0.5}$.

0.05

eRLT: Efficient VLA Reinforcement Learning via Action-Relevant Token Routing

cs.RO ·2026-10-01 ·Dehao Huang, Jianbang Liu, Jianpan Gao, Chao Tang, Zilang Cen +5 more
code/data similarity 0.71
Abstract · 21 pages, 9 figures, 8 tables

Vision-Language-Action (VLA) models provide strong behavioral priors for robotic manipulation, yet efficiently adapting them to downstream tasks remains challenging. Recent work addresses this challenge by adapting frozen VLAs through online reinforcement learning (RL), whose sample efficiency depends on the quality of the state representation used by the actor and critic. Existing methods construct such representations either with VLA-independent visual encoders or through fixed compression of internal VLA representations. Neither design explicitly extracts the task-specific action-relevant VLA features most useful for downstream action refinement and action-value estimation, therefore limiting sample efficiency. To address this limitation, we introduce eRLT, which constructs an effective state representation by routing task-specific action-relevant information across both tokens and layers of the frozen VLA. Specifically, learned routing tokens dynamically aggregate visual-language features at multiple depths, while a lightweight layer router combines these summaries into a fixed-dimensional RL token. The routing module is initialized using expert demonstrations to capture features predictive of expert actions and then refined using critic feedback from online interactions for action-value estimation. Across seven LIBERO and RoboTwin tasks, eRLT improves mean normalized learning-curve AUC by up to 23.7% over representative baselines. Real-robot experiments on USB connector insertion and motherboard ribbon-cable insertion further show AUC improvements of 108.9% and 46.7%, respectively, over the strongest baseline. Project page: https://red0orange.github.io/eRLT_site/.

0.33

RTPolicy: Real-Time (32.9 Hz) Multi-View Visuomotor Policy for Robotic Manipulation on Edge Devices

cs.RO ·2026-10-30 ·Xianbao Hou, Zehao Ni, Yonghao He, Lingfeng Qian, Xin Shi +3 more
benchmarkcode/data similarity 0.71
Abstract

Low inference latency is critical for closed-loop robotic manipulation, especially under asynchronous inference, where action chunks must be updated promptly to correct accumulated deviations. However, existing visuomotor policies rely on computationally expensive visual backbones, resulting in high inference latency and deployment overhead. In this paper, we propose RTPolicy, a multi-view visuomotor policy that attains accurate manipulation with high inference efficiency. Its core design combines view-aware feature fusion with visual compression to aggregate complementary information across camera views into a compact token representation. The representation conditions a flow-matching action generator with the robot state and flow time, reducing the cost of action generation. Extensive experiments demonstrate that this design reduces the computational cost of visual representation and action generation while preserving visual information required for manipulation. On the RoboTwin~2.0 single-task clean evaluation across 50 tasks, RTPolicy attains a mean success rate of 52.26\%, outperforming the strongest leaderboard baseline $π_0$ (46.4\%). We further evaluate RTPolicy under asynchronous streaming inference on a real bimanual platform, where RTPolicy attains a mean success rate of 72.0\% and sustains real-time inference at 30.35 ms (32.9 Hz) on the RDK S600 and 149.72 ms (6.7 Hz) on the RDK S100, both in INT16. Project Page: https://d-robotics-ai-lab.github.io/RTPolicy.project.

0.17

SLA: Scaling Spatial-Language-Action Model via Continual Pre-training

cs.RO ·2026-11-05 ·Fuhao Li, Wenxuan Song, Qizhou Huang, Ziyang Zhou, Jingbo Wang +5 more
code/datacommunity pick similarity 0.71
Abstract · Project page: https://SLA.github.io/ ; Github: https://github.com/OpenHelix-Team/Spatial-Forcing/tree/master/SLA

Reliable robotic manipulation requires both semantic understanding and precise control in three-dimensional space. However, vision-language-action (VLA) foundations largely inherit visual representations from 2D vision-language pre-training, while spatial supervision is often introduced only during task-specific adaptation. Developing spatial understanding as a transferable foundation-model capability therefore calls for learning from broader robot experience. We present SLA, a Spatial-Language-Action Model that scales implicit spatial alignment to continual pre-training and maintains it during downstream post-training. Initialized from a pretrained pi05 policy, SLA jointly optimizes action prediction and alignment between intermediate visual embeddings and spatial representations from a frozen 3D perception model. We curate and unify heterogeneous robot datasets to support spatial learning across diverse embodiments, tasks, and scenes. To accommodate this diversity, we introduce feature-dependent gates that adaptively aggregate visual embeddings from multiple VLA layers for spatial supervision. The teacher further exploits partially available depth and camera calibration alongside RGB observations, enabling effective use of heterogeneous geometric annotations. Probabilistic state dropout encourages reliance on visual cues and mitigates overfitting to demonstration trajectories. All auxiliary components are used only during training, allowing direct reuse of pretrained VLA weights and preserving the original inference architecture.

0.26

Catch Me If You Can: Real-Time Feedback Denoising for Responsive VLAs

cs.RO ·2026-09-17 ·Yiheng Ji, Xingru Zhou, Luis Sentis, Mingyo Seo
code/data similarity 0.71
Abstract · 10th Conference on Robot Learning (CoRL 2026), Austin TX, USA

Vision-Language-Action (VLA) models have shown strong generalization in robotic manipulation by combining semantic knowledge from pretrained vision-language models with expressive action-generation policies. Diffusion-based action generators are particularly effective for modeling temporally coherent action chunks, but these chunks are typically executed open-loop after inference. This limits responsiveness when objects move, contacts change, or the scene evolves during execution. We propose VLA-Feedback, a two-timescale architecture that combines low-frequency diffusion planning with high-frequency visual feedback. Rather than fully denoising an action chunk before execution, VLA-Feedback retains its final denoising step as a lightweight feedback interface, allowing each action to be corrected using the latest observation before it is executed. This design preserves the expressiveness of the diffusion planner while enabling real-time action correction without rerunning the full vision-language diffusion model. VLA-Feedback matched GR00T on static LIBERO tasks while improving average success on dynamic simulation tasks from 27.5% to 85.0%. On real-robot tasks, it improved average success from 51% to 73%. Additional materials can be found on our project page: https://vla-feedback.github.io.

0.30