CS Paper Radar

Replica-Aware Split Inference for Edge IoT Systems

Zied Jenhani, Nasrin Razmi, Admela Jukan

cs.DC cs.AIcs.SE ·submitted 2026-11-03 12:18 UTC · v1

Abstract

Split Inference (SI) addresses the hardware resource limitations of Internet of Things (IoT) devices by distributing tiny Machine Learning (TinyML) model segments across multiple IoT devices. However, a device failure can interrupt the inference pipeline. This paper proposes a replica-aware recovery approach that deploys replicas of TinyML model segments originally hosted on failed devices onto surviving devices. We formulate the joint selection of replica hosts and communication protocols as a mixed-integer linear programming (MILP) problem that minimizes post-reconfiguration inference latency, accounting for computation and transmission latencies, under flash memory and runtime memory constraints. Simulations using MobileNetV2 on heterogeneous IoT networks compare the proposed approach with four baselines. We implement the model in a network of 15 IoT devices with a maximum link-rate reduction of 75%, and show that MILP approach achieves an average modeled end-to-end inference latency that is 6.8% lower than that of Computation Greedy and 18.3% lower than that of Random. Index Terms TinyML, split inference, Internet of Things, fault tolerance, replica placement.

Closest papers

Nearest neighbours by meaning across the whole index.

EdgeCraft: Automated Model Crafting for Edge IoT

cs.LG cs.DC ·2026-09-28 ·Genglin Wang, Kaiwei Liu, Liekang Zeng, Wangsong Yin, Shangcheng Jin +2 more
similarity 0.66
Abstract · 20 pages, 15 figures, 5 tables

Machine learning (ML) increasingly powers Internet of Things (IoT) applications at the edge. Yet producing a deployable edge ML artifact for a specific scenario requires navigating a huge search space spanning data representation, model design, training on domain-specific data, and runtime customization. This workflow is fragmented and difficult to scale across diverse edge applications. We present EdgeCraft, an LLM-driven system that turns high-level intent into deployable edge ML artifacts. Building such a system raises two challenges: (1) How can an LLM be guided to find high-quality solutions that meet dynamic SLOs for task quality, latency, and energy? (2) How can trustworthy target-device verification be obtained at low cost? EdgeCraft addresses these challenges with two designs. (1) A constraint-aware synthesis tree explores alternative candidates and uses measured SLO gaps to guide each improvement. (2) A multi-fidelity verifier progressively combines low-cost checks with full target-device verification to reduce verification cost while preserving reliable verification results. It also records verified failures for reuse, avoiding repeated device work. To support concurrency, EdgeCraft provides a multi-tenant runtime that runs cloud training and target-device verification in parallel while isolating requests. Across 50 public tasks, EdgeCraft exceeds the task-specific Reference in best-observed quality on 40 tasks and finds an SLO-feasible artifact on 45, with the two outcomes overlapping on 38 tasks. Moreover, EdgeCraft achieves competitive performance on our self-collected SEN dataset, suggesting its generalizability to real-world IoT sensing tasks.

0.18

Seamless Deployment of Machine Learning Inference at the Far Edge: An Empirical AWS IoT Greengrass Architecture for Industrial Predictive Maintenance

cs.DC cs.AI ·2026-10-10 ·Prince Kwabena Appiah Boadu, Jeffery Baafi Kyei, Enoch Kofi Koranteng, Griffth Selorm Klogo
top venuehot direction similarity 0.64
Abstract · Conference paper draft in IEEE format, with code appendices. Already accepted in AiBThings - IEEE 4th International Conference on Artificial…

Industrial IoT sensors produce continuous, high-volume data streams that predictive maintenance needs to analyse in real time. Cloud-centric architectures send all raw telemetry to central servers, which costs latency, bandwidth and resilience. This paper presents a hybrid cloud-edge architecture for manufacturing predictive maintenance built on AWS IoT Core and AWS IoT Greengrass v2, with local machine learning inference at the edge and selective cloud synchronization. We deploy two configurations on real AWS infrastructure and compare them: a cloud-only baseline (Configuration A) and the proposed hybrid edge architecture (Configuration B). We measure end-to-end inference latency, bandwidth consumption and inference accuracy. Configuration B cuts cloud-bound bandwidth by 86.8% (63.6 KB to 7.2 KB per 200-reading window) and decision latency by 256x (23.1 ms cloud round trip to 0.09 ms local inference). At the edge, with no cloud involvement, it keeps an anomaly-class F1 score of 0.84 and 91% recall. The evaluation also instruments system uptime and Stream Manager queuing under cloud disconnection; the quantitative disconnection experiment is left as planned work. Our review of the literature points to four gaps that this work addresses: the lack of empirically validated Greengrass v2 deployments for predictive maintenance, unquantified bandwidth savings from selective edge synchronization, unmeasured resilience under cloud disconnection, and the open MLOps feedback loop at the edge.

0.44

DySCo: Dynamic Sharding for Collaborative Edge-Cloud LLM Inference with Depth-Synchronized Batching

cs.DC cs.AIcs.LGeess.SY ·2026-10-06 ·Jingpo Xu, Paul Joe Maliakel, Ivona Brandic, Shashikant Ilager
code/data similarity 0.60
Abstract · article under submission

Pervasive intelligent applications are increasingly deployed on mobile and Internet of Things (IoT) edge devices. Consequently, Large Language Models (LLMs) are increasingly used to support these applications. Yet, due to their high resource demands, LLMs are mostly deployed in the cloud. Layer-wise edge-cloud inference lets resource-constrained edge devices contribute computation to LLMs they cannot host in full. However, heterogeneous split points introduce two coupled inefficiencies. First, edge execution and communication create idle gaps between cloud invocations. Second, requests arriving at different model depths cannot be conventionally batched. We present DySCo, a collaborative runtime that keeps KV caches local and introduces dyForward, a model-aware layer-range executor that runs configurable contiguous layer ranges from resident model shards without reloading weights. For multi-edge serving settings, we introduce depth-synchronized batching (DSB), which advances heterogeneous requests to the deepest cut and batches their common suffix. Experiments across heterogeneous devices, two model families, and local and wide-area links show that idle gaps increase the latency of subsequent GPU forward calls even when waiting time is excluded, adding up to 25 ms of additional cloud-side suffix latency per decoding step in our measurements. At an average concurrency of eight, DSB improves throughput by 275% over FIFO, 48% over exact-match batching, and 79% over round-robin interleaving while reducing mean per-session latency. Together, these results show that requests with different edge-cloud splits can reuse resident cloud weights and share batched suffix computation. The artifact repository for this work is publicly available at: https://github.com/Large-scale-Sustainable-Computing-LSC/dysco-artifact

0.26

Energy Measurement and Optimization of TinyML in Resource-Constrained Embedded Systems: A Systematic Mapping Study

cs.LG cs.ARcs.ET ·2026-11-05 ·Clariele Almeida, Renan Beserra, Rafael Moura, Danilo Araújo, Bruno Nogueira +2 more
survey similarity 0.60
Abstract · 40 pages, 10 figures, 8 tables

The rapid expansion of the Internet of Things (IoT) has increased the volume of data generated at the network edge, where many devices operate under severe memory, processing, and energy constraints. In this context, Tiny Machine Learning (TinyML) enables machine learning (ML) tasks to be executed on microcontrollers, smart sensors, and other resource-constrained platforms. However, the literature remains heterogeneous regarding the algorithms evaluated, energy-measurement methods, reported metrics, influencing factors, and optimization strategies. This study presents a systematic mapping of energy-aware TinyML research. It identifies the main models and learning approaches, classifies energy-evaluation methodologies and metrics, examines the technical factors affecting energy consumption, and organizes the reported optimization techniques into a structured taxonomy. The findings highlight the frequent use of convolutional and lightweight architectures, direct measurements and analytical estimations, and factors related to model architecture, hardware, communication, numerical precision, and input characteristics. The optimization strategies were grouped into model compression, hardware-aware design, system and communication optimization, and data and processing optimization. The results also reveal limited standardization in experimental platforms, measurement procedures, and reporting practices, limiting reproducibility and direct comparison across studies. This mapping provides an updated overview of the field and guidance for developing and evaluating more energy-efficient TinyML solutions.

0.25

EV-JEPA: Elastic V-JEPA for Any Device and Cross-Device Inference

cs.CV cs.AIcs.LG ·2026-10-09 ·Anxhelo Diko, Jieyu Lin, Stefano Ambrogio, Ziyun Li, Mahmoud Assran +3 more
similarity 0.60
Abstract

Foundation models like V-JEPA are increasingly deployed across a heterogeneous edge-cloud continuum spanning smart glasses, phones, robots, and servers. Yet, they are typically trained as rigid, fixed-capacity networks bound to one device, supporting neither reconfigurable compute budgets nor collaborative execution. Existing approaches address only one axis at a time: slimmable and NAS-based methods provide width elasticity but assume single-device inference, whereas split-computing methods enable cross-device collaboration only for fixed partitions and static capacities. We introduce Elastic V-JEPA (EV-JEPA), a single model trained once and deployable everywhere along the continuum. Its width is reconfigurable, and it is natively partitionable across heterogeneous devices. At its core is Transition-Aware Triplet Training (T3). At each step we pick a narrow and a wide width, and train three paths: each width alone, plus a hybrid path that runs the early layers narrow and the rest wide. The hybrid switch point is where one device hands off to another, so the same weights learn both single-device and cross-device execution. Across various benchmarks, EV-JEPA falls within 1 accuracy point of independently trained baselines while improving over previous elastic training approaches by up to 11 accuracy points. Narrow-to-wide cross-device hybrid execution recovers to within 1.1 points of the highest-capacity standalone model and supports many-to-one, any-to-any, and variable-split configurations. Finally, we show that the elastic principle extends beyond the backbone to an elastic token compression mechanism that exposes controllable trade-offs among on-device computation, latency, and accuracy.

0.29

Reliable Federated TinyML Deployment for IoT Security

cs.CR cs.LG ·2026-09-23 ·Younsoo Park, Seokhyoen Bae, Shasi Kumar Ramachandran Prabhu, Suman Saha, Peilong Li
similarity 0.60
Abstract

The growing deployment of Internet of Things (IoT) devices has increased the need for privacy-preserving intrusion detection systems that operate directly on resource-constrained hardware. Federated Learning enables collaborative model training without sharing raw data, but conventional federated models are often too large and unstable for deployment on microcontroller-class devices. TinyML techniques enable compact neural networks but are typically designed for inference-only workloads. This work investigates combining Federated Learning with TinyML-based model compression for intrusion detection in IoT environments. We evaluate compression strategies including knowledge distillation, structured pruning, and quantization within a federated training pipeline. Preliminary results show that training stability plays a critical role in federated TinyML systems. In particular, server-coordinated cosine learning-rate scheduling improves Attack Recall from 46.7% to 93.85% while enabling substantial model compression and efficient edge deployment. These findings provide insights for designing lightweight and privacy preserving intrusion detection systems for IoT devices.

0.48

MANE: A Multi-Path Adaptive Network for Edge Onloading of Deep Neural Networks

cs.DC cs.AI ·2026-09-13 ·Sokratis Nikolaidis, Stylianos I. Venieris, Leonidas Malachias, Iakovos S. Venieris
similarity 0.57
Abstract · 6 pages, 5 figures, submitted to IEEE UIC 2026

Split computing constitutes a widely used distributed inference approach, where a lightweight head model is onloaded onto the device and a heavier tail model resides on an edge server, leveraging the growing computational capabilities of modern System-on-Chips while alleviating server load. As intelligent indoor environments such as smart offices grow increasingly populated with diverse IoT devices, a single edge server must simultaneously assist multiple devices, each competing for the same shared inference resources. Without a principled mechanism to manage this shared load, the server is quickly overwhelmed, causing latency SLO violations and rendering server-assisted inference ineffective. In this work, we present MANE, a distributed inference framework that equips the server with a multi-path tail architecture, enabling a dynamic accuracy--throughput trade-off at runtime. By introducing a novel multi-path model architecture, a three-stage training scheme featuring a Joint Head Network Distillation loss and a hysteresis-based scheduler with an equitable device-fallback policy, MANE maintains over 80% SLO satisfaction rate where state-of-the-art onloading methods fail completely, while preserving accuracy 6pp higher than on-device alternatives, across up to 40 concurrent devices.

0.13

Communication-Efficient Federated Domain Generalization in Edge Networks via Dynamic Prototype Regulation

cs.LG ·2026-10-19 ·Yuankun Xia, Hui Wang, Ling Yuan, Ziyu Hong, Di Yin +1 more
similarity 0.57
Abstract

Federated learning (FL) is a distributed paradigm for Internet of Things (IoT) edge networks. However, deploying Vision-Language Models (VLMs) over wireless edge networks presents distinct challenges: large model parameters increase uplink transmission latency over bandwidth-constrained fading channels, and non-independent and identically distributed (Non-IID) data exacerbates client drift. Existing feature alignment solutions often introduce auxiliary computations that consume time slots allocated for wireless parameter transmission, increasing the likelihood of straggler dropouts under system delay constraints. To address these issues, we propose DPGR-GCAM, a communication-efficient federated domain generalization framework. By employing a dual-parameter-efficient fine-tuning (PEFT) architecture, we design a channel-aware tiered transmission mechanism that adaptively truncates payloads to maximize node survival rates under fading conditions. To mitigate client drift, we introduce the Gradient-Conflict Aware Modulation (GCAM) mechanism. GCAM operates within the low-dimensional feature manifold to dynamically resolve multi-objective optimization conflicts with minimal edge computation latency, thereby reducing computation-induced network outages. Experiments demonstrate that DPGR-GCAM improves cross-domain generalization and sustains convergence under network fading scenarios with a 10\% client participation rate.

0.13