CS Paper Radar

Faster Planar Diameter using Pseudoline Envelopes

Da Wei Zheng, Daniel Prigan

cs.DS cs.CG ·submitted 2026-11-03 14:59 UTC · v1

Abstract

We give an improved algorithm for weighted directed planar diameter that runs in $\widetilde{O}(n^{3/2})$ time. This improves upon the $\widetilde{O}(n^{5/3})$ time algorithm for weighted directed planar diameter of Gawrychowski, Kaplan, Mozes, Sharir, and Weimann [SIAM J. Comput. 2021] and the recent $\widetilde{O}(n^{8/5})$ time algorithm for unweighted undirected planar diameter of Fredslund-Hansen, Mozes, and Weimann [SOSA 2027]. The main new result is an improved data structure for computing the farthest vertex when given feasible planar distances to the vertices on the outer face. The critical insight is the fact that normalized distances to the vertices of a face behave like pseudolines, for which we can leverage range searching and upper envelope data structures. Using the farthest vertex data structure, we are able to compute all vertex eccentricities and diameter in $\widetilde{O}(n^{3/2})$.

Closest papers

Nearest neighbours by meaning across the whole index.

$\tilde{\text{O}}$ptimal Distributed Maximum Flow Approximation in Undirected Planar Graphs

cs.DC cs.DS ·2026-08-10 ·Yaseen Abd-Elhaleem, Michal Dory, Oren Weimann
published similarity 0.65
Abstract · 62 pages. 25 figures. A shortened version is to appear in DISC 2026

Persistent efforts in recent years have been devoted to devising distributed algorithms for fundamental optimization problems in planar graphs. In particular, for Single-Source Shortest-Paths, there is an $\tilde O(D^2)$-rounds exact algorithm [Li, Parter STOC'19] for directed planar graphs, and an $\tilde {O}(D)$-rounds $(1+o(1))$-approximation algorithm [Rozhon, Grunau, Haeupler, Zuzic, Li STOC'22] for undirected planar graphs (where $D$ is the graph's hop-diameter). Recently [Abd-Elhaleem, Dory, Parter, Weimann PODC'25], a matching bound for the exact case was obtained for the Maximum $st$-Flow problem. Namely, an $\tilde O(D^2)$-rounds exact algorithm for directed planar graphs. However, for the approximate case, they give a $D\cdot n^{o(1)}$-rounds $(1-o(1))$-approximation algorithm for undirected planar graphs that works only for the special case where both $s$ and $t$ lie on the same face. In this paper, we remove the restriction that both $s$ and $t$ must lie on the same face (we also eliminate the $n^{o(1)}$ factor). Namely, we present the first distributed near-optimal $\tilde{O}(D)$-rounds $(1-o(1))$-approximation algorithm for Maximum $st$-Flow in general undirected planar graphs. Our main technical contribution is a distributed implementation of the classical Reif's [SICOMP'83] centralized algorithm. This is achieved by a careful recursive incision procedure on the planar dual $G^*$ of the graph $G$. It is challenging, because we need to simulate dynamic changes (incisions) over the dual graph $G^*$, while we can only communicate over the input graph $G$.

0.33

Õptimal Facial Distance Labeling in Planar Graph

cs.DS ·2026-11-08 ·Noy Rotbart, Oren Weimann
theoryhot direction similarity 0.64
Abstract

We show how to assign labels of size $\tilde O(n^{1/3})$ to the vertices of a face $F$ in an $n$-vertex unweighted undirected planar graph $G$ s.t one can deduce the distance between any two vertices of $F$ given their labels alone. This matches (up to log factors) the $Ω(n^{1/3})$ lower bound of Gavoille, Peleg, Pérennes, Raz from 2004. Prior to our work, the smallest labels were of size $O(n^{1/2})$.

0.28

Breaking Two Barriers for Dynamic Planar Reachability

cs.DS ·2026-10-09 ·Adam Karczmarz, Michał Włodarczyk
top venuetheory similarity 0.61
Abstract · To appear at SODA 2027

We consider the reachability problem in fully dynamic directed planar graphs: the graph undergoes edge updates (insertions and deletions) and we receive queries asking if one vertex is reachable from another. The current-best online algorithm for dynamic planar reachability spends worst-case time $\widetilde{O}(n^{2/3})$ per query/update [Subramanian, ESA '93]. This can be improved to $\widetilde{O}(n^{1/2})$ in the offline setting or when the embedding is fixed [Diks and Sankowski, ESA '07]. Our contribution is twofold: 1. We present the first algorithm that breaks the square-root barrier for dynamic planar reachability in the offline setting, obtaining time ${O}(n^{0.49})$ per query/update. This shows that the problem is easier than answering distance queries in a dynamic undirected planar graph, for which a conditional lower bound of $n^{1/2 - o(1)}$ is known [Abboud and Dahlgaard, FOCS '16]. Notably, this lower bound applies to both online and offline algorithms. 2. Second, in the general online setting we design a randomized data structure with amortized update and query time ${O}(n^{0.664})$. This is the first improvement upon the exponent $2/3$ in over three decades. The main engine behind our theorems is a new sparsification framework aimed at maintaining information about reachability. Specifically, we study digraphs through the lens of VC dimensionality of certain set systems. First, we design sparse reachability emulators for planar digraphs that preserve the VC dimension. Second, we utilize orderings with a low ``stabbing number'' [Chazelle and Welzl, Discrete Comput. Geom. '89] to compute subquadratic reachability emulators in subquadratic time whenever the VC dimension is bounded.

0.40

When Shall We $k$ Meet Again? Tight Algorithms for Diameter and Radius under the Meet Distance

cs.DS ·2026-09-18 ·Yael Kirkpatrick, John Kuszmaul, Merey Temirzinova, Virginia Vassilevska Williams
theory similarity 0.60
Abstract · 20 pages

Finding an optimal meeting point for a collection of agents on a directed graph is a classical problem studied in the context of network analysis, operations research and computational geometry. In this work, we use the two objectives of optimal meeting points examined in the literature to study two notions of meet-distance: $d^{\max}(u,v)$, the minimum over all meeting points $w$ of $\max(d(u,w), d(v,w))$; and $d^+(u,v)$, the minimum over all meeting points of $d(u,w) + d(v,w)$. These values measure the minimum time and minimum total distance required for two agents to meet. We initiate the fine-grained study of fundamental graph parameters under the two notions of meet-distance, namely the diameter, radius and eccentricities. For general directed graphs, we give an $\tilde{O}(m\sqrt{n})$ time algorithm for computing a 2-approximation to both notions of meet-diameter and show that this result is optimal under SETH. In contrast, we show that such a result is unattainable for the meet-radius as any finite approximation requires quadratic time under the Hitting Set Conjecture. For directed acyclic graphs, we obtain stronger results. We compute the meet$^{\max}$-diameter exactly in linear time and give a linear-time $2$-approximation for the meet$^{+}$-diameter. We complement the latter with a quadratic-time lower bound for any $(3/2-\varepsilon)$-approximation under SETH, yielding a separation between the two meet-distance objectives. Finally, we study the generalized meet-distance of $k$-tuples of vertices. For every positive integer $\ell$, we reduce the problem of $\ell$-approximating the $k$-point meet-diameter to computing an exact meet-diameter on smaller tuples, obtaining an $\ell$-approximation in time \[ O\!\left( mn+ \ell \left\lceil k^{1/\ell}\right\rceil n^{\left\lceil k^{1/\ell}\right\rceil+1} \right). \]

0.28

A Sublinear Approximation Algorithm for Minimum Dilation Trees in the Plane

cs.CG ·2026-09-08 ·Sarita de Berg, Jacobus Conradi, Peter Kramer, André Nusser, Sampson Wong
similarity 0.60
Abstract · 46 pages, 18 figures

The dilation of a geometric graph measures how much longer the path between pairs of points becomes when restricted to graph edges, rather than following the direct path through the ambient space. The minimum dilation tree of a point set is the spanning tree with minimum dilation, where edge lengths in the tree are given by distances in the ambient space. In the Euclidean plane, computing the minimum dilation tree is NP-hard, but no hardness of approximation result is known. On the other hand, the minimum spanning tree is an $(n-1)$-approximation to the minimum dilation tree, but no asymptotically-better approximation algorithm is known for general point sets in the Euclidean plane. We give the first sublinear approximation algorithm for the minimum dilation tree in the Euclidean plane. Our approximation ratio is $\tilde{O}(n^{14/15})$ and our algorithm runs in polynomial time. This resolves an open problem proposed by Eppstein in 1996.

0.33

On (Directed) Width-Parameters of Geometric Spanners

cs.CG ·2026-09-18 ·Kevin Buchin, Carolin Rehs, Torben Scheele
published similarity 0.60
Abstract · Accepted at ISAAC 2026

To speed up algorithms on geometric graphs, it is common to approximate the complete Euclidean graph while maintaining certain geometric properties. A (directed) $t$-spanner $G$ for a point set $P$ in the Euclidean space is a (directed) graph such that for every pair of points, the shortest path in $G$ is at most a factor $t$ longer than the Euclidean distance between those points. In this paper, we investigate $t$-spanners that are bounded by certain graph parameters. Let $κ$ be a graph parameter. We show that for path-width, branch-width and cut-width there is an $\mathcal{O}(n/k^{d/(d-1)})$-spanner $G$ on $P$ with $κ(G)=k$ and that this is asymptotically worst-case optimal. In $\mathbb{R}^2$ we show the same bounds for planar graphs of clique-width or rank-width $k$. In contrast, for tree-depth, we show that there are sets of points for which the dilation cannot be bounded. Therefore, we investigate computing a spanner with tree-depth $k$ and minimum dilation. We show that already for tree-depth $3$ this problem is NP-hard to approximate within any factor strictly less than $\sqrt{2}$, and present an XP-algorithm to compute for a given tree-depth $k$ a graph with dilation at most $2t^*$, where $t^*$ is the minimum dilation. We further extend these results to obtain directed $\mathcal{O}(n/k^{d/(d-1)})$-spanners $G$ with $κ(G)=k$ for $κ$ being directed tree-width, directed path-width or DAG-width and show that also in the directed case, this is asymptotically worst-case optimal.

0.29

The Cost of Changing Edges for Diameter Computation and More

cs.DS ·2026-08-12 ·Sam Hiken, Yael Kirkpatrick, Jakob Nogler, Virginia Vassilevska Williams
top venue similarity 0.59
Abstract · Corrected some errors and added an appendix with some (slight) improvement found by ChatGPT Astra for the reduction from decremental (exact)…

The sensitivity setting is a restricted setting for dynamic algorithms, particularly practical for scenarios where extensive preprocessing is feasible but responses to real-time modifications must be near-instantaneous before the data structure is eventually rebuilt. For graph problems, a sensitivity data structure is constructed with a preprocessing time P so that the following queries can be answered quickly, preferably in $O(1)$ time: given an edge $e$, return the answer to the problem on either $G \setminus e$ (decremental) or $G \cup e$ (incremental). We almost entirely settle the decremental setting for the diameter and eccentricities problems in a variety of approximation regimes by matching P to the static runtime while supporting $O(1)$-time queries, thereby improving upon all previous single-failure results [Biló, Cohen, Friedrich, Schirneck, MFCS 2021; Biló, Choudhary, Cohen, Friedrich, Krogmann, Schirneck, ICALP 2023, Algorithmica 2026]. More precisely: (1) We provide a tight reduction demonstrating that any exact distance sensitivity oracle can be used to efficiently solve decremental exact diameter and all-node eccentricities; (2) For the approximate setting, we match the runtime of all known static diameter algorithms across all sparsity settings, up to an additional $1+o(1)$ factor in approximation. Conversely, for the previously unexplored incremental setting of these problems: (3) We develop new lower bounds, demonstrating that no incremental algorithm can efficiently approximate diameter, radius, or eccentricity beyond a $5/3$ factor in undirected graphs or a $2$ factor in directed graphs; (4) We introduce two new instructive techniques and demonstrate how to utilize them to construct several new algorithms. Most notably, we develop incremental single-node eccentricity approximations for both directed and undirected graphs that match our new lower bounds.

0.31

Finding the Farthest in High Dimensions: Dynamic Diameter and Farthest-Neighbor Search

cs.DS ·2026-11-12 ·Mohammad Hajiaghayi, Morteza Monemizadeh
similarity 0.59
Abstract

We give algorithms for maintaining diameter in the dynamic model, and for answering farthest-neighbor queries on a fixed point set, in high-dimensional Euclidean space. For every fixed $1<c<\sqrt2$, update horizon $t$, and error probability $δ$, we maintain an actual factor-$c$ diameter pair with worst-case update time $n^{2/c^2-1}\text{poly}_c(d,\log(2nt/δ))$ and space $n^{2/c^2}\text{poly}_c(d,\log(2nt/δ))$. Here $n$ bounds the number of active point identities. The update exponent improves Indyk's SODA~2003 bound from $1/c^2$ to $2/c^2-1$, while the space exponent improves from $1+1/c^2$ to $2/c^2$. At $c=\sqrt{3/2}$, the update exponent decreases from $2/3$ to $1/3$. A separate construction achieves approximation exactly $\sqrt2$ with update time polynomial in $d$ and $\log(2nt/δ)$. With probability at least $1-δ$, every maintained answer during the first $t$ updates is correct, even when updates depend on all previous answers and random choices. A second construction improves the update exponent when the space exponent is close to one. On rational inputs, it has an always-correct variant with expected amortized update bounds over every fixed finite prefix of an adaptive execution, without an advance update horizon. The dynamic structures store a current answer, so reporting its two point identifiers takes constant time. The geometric method also gives static diameter algorithms and a farthest-neighbor structure for a fixed set that answers arbitrary adaptive queries. At approximation $\sqrt2-\varepsilon$, the diameter time is $n^{1+O(\varepsilon)}$, and the query time is $n^{O(\varepsilon)+o(1)}$ with near-linear preprocessing and space, up to polynomial input-parameter factors.

0.25