CS Paper Radar

Enabling risk and reliability analysis in next-generation computational tools via multifidelity methods

Anirban Chaudhuri, Karen Willcox

cs.CE math.OCstat.CO ·submitted 2026-11-03 15:45 UTC · v1

Abstract

Risk and reliability analysis are fundamental to the design, assessment, and operation of safety-critical complex systems; however, their integration into next-generation computational tools is constrained by the cost of uncertainty quantification with expensive computational models. The computational challenge is particularly prohibitive for tail-sensitive quantities, such as probabilities of failure, conditional values-at-risk, and buffered probabilities of failure, where accurate estimation can require a large number of model evaluations. Multifidelity methods provide a framework for addressing this computational bottleneck by combining information from models of varying accuracy and cost while retaining the predictive accuracy of the high-fidelity model. This review summarizes the state of the art in methods that enable scalable risk and reliability analysis using multifidelity control variates, multifidelity importance sampling, and multifidelity active learning.

Comment
Review article

Closest papers

Nearest neighbours by meaning across the whole index.

Applied bifidelity material response model construction and uncertainty quantification with a sampling hypernetwork

cs.LG ·2026-11-07 ·Reese E. Jones, Cosmin Safta, Dan Bolintineau, Craig M. Hamel, Gianluca Geraci +1 more
similarity 0.61
Abstract · 29 pages, 16 figures

Multifidelity modeling offers a practical route to accurate prediction and uncertainty quantification when high-fidelity data are scarce but lower-fidelity data are comparatively abundant. This work develops a bifidelity Langevin sampling hypernetwork framework that constructs probabilistic neu- ral response models by learning a posterior distribution over model parameters rather than a single deterministic fit. The method combines a flexible shared-latent data representation for low- and high-fidelity responses, enabling parameter sharing and transfer learning between the fidelities. We introduce several methodological enhancements to improve the robustness and efficiency of this ap- proach, including stability-promoting drift models, staged and conditional training strategies, adap- tive initialization of Langevin trajectories, and training procedures designed to better exploit corre- lations between fidelity levels. These additions improve convergence behavior, reduce the sampling effort required to obtain representative posterior ensembles, and provide more reliable predictive uncertainty in data-limited regimes. The resulting framework makes more effective use of available multifidelity data while preserving interpretability through the learned posterior structure, yielding improved predictive performance, better uncertainty characterization, and a more stable workflow for constructing uncertainty-aware surrogate models. The method is demonstrated on experimental, high-fidelity simulation and illustrative synthetic data.

0.34

Multifidelity Operator Inference for Non-intrusive Model Reduction under Data Scarcity

cs.LG math.NAstat.CO ·2026-11-10 ·Vivian Zhang, Tomoki Koike, Atticus Rex, Elizabeth Qian
similarity 0.61
Abstract · 21 pages, AIAA SciTech Forum 2027

Many-query analyses, in which a computational model is repeatedly evaluated, play an important role in uncertainty quantification and optimization for engineering design. However, many-query analyses can be prohibitively expensive when considering high-fidelity numerical models, especially those governed by partial differential equations (PDEs). Surrogate modeling replaces costly simulations with cheap approximations, enabling practical uncertainty quantification and design workflows. Machine learning (ML) approaches to surrogate modeling have gained significant traction in the development of surrogate models due to their non-intrusive nature; they do not require access to the underlying simulation code. The Operator Inference (OpInf) approach, in particular, fits reduced operators to state and corresponding time derivative data. However, high-fidelity training data is scarce due to limited computational budgets, and OpInf models trained on such scarce data often exhibit high variance, a critical liability in high-risk engineering design. We propose Multifidelity Operator Inference (MF-OpInf), which reduces this variance by supplementing scarce high-fidelity snapshots with abundant low-fidelity data drawn from coarser discretizations of the same problem. MF-OpInf handles data across varying fidelity levels by utilizing a multifidelity linear regression framework to estimate the reduced operators. Numerical experiments on model PDE problems demonstrate that MF-OpInf predicts PDE solution fields with higher accuracy compared to the high-fidelity-only OpInf with the same computational budget.

0.37

ReliableNet: A Chance-Constrained Approach to Trustworthy Classification in Deep Learning

cs.LG ·2026-08-10 ·Ange-Clément Akazan, Ineza Remy Mugenga, Abebe Geletu, Jean Medard Ngnotchouye, Issa Karambal
benchmark similarity 0.58
Abstract

A prediction that is both confident and wrong is a critical reliability failure because it can bypass abstention and human review precisely when the model is mistaken. Empirical risk minimization (ERM) controls average loss but not this failure directly, while calibration, uncertainty estimation, conformal risk control, and selective prediction methods target related reliability properties rather than bounding the joint failure event during training. We propose ReliableNet, which constrains the Joint Confident-Wrong (JCW) probability, the probability that a prediction is simultaneously confident and incorrect, below a user-specified risk budget $α\in(0,1)$. We formulate this as a chance-constrained ERM problem, use a conservative smooth inner approximation whose population feasibility implies the original JCW constraint. Across four tabular and two image datasets, ReliableNet is the only method certified within the JCW budget for every dataset and seed in distribution, when compared against baselines spanning ERM, post-hoc calibration, conformal risk control, and selective prediction. Under demographic, ambiguity, spurious-correlation, novel-class, and covariate shifts, it achieves the lowest empirical JCW among the compared methods while remaining very competitive in accuracy, coverage, calibration, and selective prediction. Risk-coverage results further indicate that ReliableNet achieves better selective ranking than the benchmark methods on most datasets. Overall, ReliableNet provides a principled approach to trustworthy classification.

0.04

A Hierarchy of Entropy-Shapley Games for Multivariate Predictive Uncertainty

cs.LG stat.ML ·2026-09-28 ·Niklas Koenen, Claudia Battistin, Jeriek Van den Abeele, Martin Jullum
similarity 0.57
Abstract

Modern probabilistic machine learning models increasingly produce multivariate outputs with complex dependence structure, from multi-step time-series forecasts to sample path predictions. Understanding which input features drive the predictive uncertainty is important for risk-aware decisions, model diagnostics, and deciding whether the uncertainty should be mitigated or hedged against. This attribution problem requires a choice of how dependencies between output components are treated. Existing approaches reduce the output to a scalar through aggregation or projection before attribution, thereby obscuring whether features affect marginal uncertainty, dependence structure, or both, while component-wise analyses can miss dependence effects entirely. We close this gap by introducing a hierarchy of three entropy-based Shapley games that make this output-side choice explicit for any ordered multivariate outcome, ranging from per-component marginal entropy to fully joint entropy. The hierarchy isolates a cross-component attribution term that captures how each feature shifts the dependence between output components, a quantity invisible to component-wise methods. We establish a chain-rule decomposition of the joint attribution and characterize the cross-component term through conditional total correlation, providing both closed-form and sample-based estimators. Finally, we demonstrate how the framework captures differences in learned joint structure across probabilistic models from distributional regression to a zero-shot time series foundation model.

0.21

Robust Active Learning for More Efficient and Reliable Paths to Optimal Design

cs.CE cs.LG ·2026-10-28 ·Hayriye Pehlivan Solak, Francesco Di Fiore, Jeroen Wackers, Riccardo Pellegrini, Andrea Serani +2 more
similarity 0.57
Abstract · Global Conference on Naval Architecture and Ocean Engineering (G-NAOE) 2026

Simulation-driven design optimization requires active learning strategies that efficiently combine models with different computational costs and levels of fidelity. We introduce Multifidelity Cost-Aware Screening (MF-CAS), which enables the joint selection of sampling location and fidelity using a surrogate that provides decomposed uncertainty intervals rather than a complete predictive probability distribution. MF-CAS exploits the contribution of each fidelity to the high-fidelity uncertainty together with its computational cost to determine whether a candidate should first be evaluated at low fidelity or directly progressed towards high fidelity. The method is assessed on the constrained 14-dimensional hydrodynamic optimization of the DTMB 5415 hull under a deliberately limited computational budget. MF-CAS achieves an approximately 9.0% resistance reduction, compared with 6.7% for the best baseline optimisation method, demonstrating that incorporating fidelity-resolved uncertainty directly into the joint location-fidelity decision can substantially improve multifidelity active learning efficiency.

0.23

CUBICS: Situation-aware performance estimation for safety-relevant ML components

cs.AI ·2026-08-17 ·Benjamin Herd, Jessica Kelly, Mario Trapp
published similarity 0.57
Abstract · To be published in the proceedings for the 37th International Symposium on Software Reliability Engineering (ISSRE 2026)

Machine learning (ML) is a key technology driving innovation today, but ensuring ML safety remains a major challenge for safety-related applications. A promising idea is to build proven-in-use arguments from field data, e.g. by running ML components (MLCs) in shadow mode or within safety envelopes so that their outputs can be monitored as 'safe probes' without affecting safety. These probes can then be used to build a statistical argument about field performance in a Bayesian way. However, many Bayesian field-data approaches in safety engineering model failures as a simple Bernoulli (or binomial) process with a single global failure probability and i.i.d. trials, which is rarely adequate for MLCs whose performance depends strongly on context. Statistical evidence is also about coverage of relevant situations, including edge cases, and building a single integrated statistical model for the entire system is usually not feasible. To address these challenges, this paper introduces CUBICS, a context-modular framework for per-component, situation-aware performance estimation of safety-relevant ML components. CUBICS partitions the operational design domain into situations and, for each safety-relevant component, defines a set of situation-specific assumptions and probabilistic guarantees that are represented and updated in a Bayesian manner using Subjective Logic (SL). By combining these guarantees with beliefs about how often each situation occurs, CUBICS derives an overall risk estimate for each component without requiring a monolithic system-level statistical model, and thus provides a building block for modular, field-data based safety assurance.

0.54

Integrating Prognostics, Maintenance, and Tail Assignment under Remaining Useful Life Uncertainty: A Stochastic Optimisation Approach for Airline Reliability

eess.SY ·2026-08-23 ·Benno Käslin, Marta Ribeiro, Dimitrios Zarouchas, Manuel Arias Chao
similarity 0.55
Abstract

Ensuring reliability, safety, and economic efficiency in airline operations requires maintenance and fleet scheduling strategies that explicitly account for uncertainty in Remaining Useful Life (RUL) predictions. However, the integration of prognostic uncertainty into operational decision-making remains a major challenge. In practice, tail assignment (TA) and maintenance scheduling (MS) are typically optimized separately or sequentially, thereby limiting the effective use of predictive health information despite their strong interdependencies. This paper proposes a unified optimisation framework that jointly integrates TA, MS, and predictive maintenance (PdM) under RUL with confidence intervals. The problem is formulated as a stochastic mixed-integer linear program, and a scalable solution approach is developed by embedding a neural network surrogate to approximate expected disruption costs resulting from RUL uncertainty. The proposed framework is evaluated using operational scenarios derived from real-world airline data. Results show that explicitly incorporating prognostic uncertainty in a joint planning model reduces operational risk, i.e., downstream disruption costs and flight cancellations, compared to deterministic and sequential approaches, at the expense of moderate increases in planning cost. These findings highlight the value of tightly coupling predictive maintenance with operational planning and demonstrate the potential of surrogate-assisted stochastic optimisation for scalable, uncertainty-aware airline decision-making.

0.27

CORE-RL: Confidence-Oriented Reliability Evaluation of Black-Box Reinforcement Learning Policies

cs.AI ·2026-10-03 ·Santhosh GS, Ananya Ravi, Devika Jay, Abhishek Sarkar, Perepu Satheesh Kumar +3 more
theory similarity 0.54
Abstract

The deployment of Reinforcement Learning (RL) agents in critical domains must be preceded with a pipeline to evaluate the alignment of the RL agent with complex multi-objective specifications and robustness under real-world environmental drift. However, to protect intellectual property, the RL agent may be delivered for evaluation as opaque executable or remote API, which makes traditional evaluation techniques based on the internals of the policies infeasible. To address this gap, CORE-RL: Confidence-Oriented Reliability Evaluation of black box RL policy is proposed in this paper. The CORE-RL pipeline introduces a Unified Reliability Metric that formally integrates early task termination and safety constraint violations, preventing unsafe policies from masking failures through premature episode halts. By subjecting the policy to a noise certification envelope of perceptual noise, actuation noise and change in environment dynamics, the pipeline computes the finite-sample Clopper-Pearson bounds on unified reliability metric and Hoeffdings' lower bound on reward and safety cost. The pipeline then defines safe operational design domain to report high-confidence certificates for safety and expected performance. Experiments on continuous control tasks demonstrate the CORE-RL pipeline's ability to automatically reject non-compliant policies and map the safe Operational Design Domain (ODD) of safety-aware policies. Thus CORE-RL provides an evaluation framework towards a quantitative, transparent and reproducible, statistical rationale necessary to safely evaluate, compare, and deploy black box RL solutions.

0.08