CS Paper Radar

LoopQ: Fair, Closed-Loop Evaluation of Quantized Vision-Language-Action Models

Syed Umer Bukhari, Magnus Almgren, Ahmed Ali-Eldin

cs.RO ·submitted 2026-11-03 15:51 UTC · v1
benchmark

Abstract

Post-training quantization (PTQ) for vision-language-action (VLA) models promises smaller and faster VLA deployments. However, when analyzing existing VLA quantization works, we realised that it is hard to reason about the performance of the suggested quantization method compared to existing, similar, or in many cases, simpler PTQ methods. We present LoopQ, a closed-loop benchmark that compares multiple quantization policies on the same checkpoint, layers and engine, varying only the method and the kernels. We evaluate RTN, AWQ, GPTQ, ActQuant and QuantVLA on four VLAs with more than 180,000 episodes of LIBERO and LIBERO-plus, compare against QVLA's reported results on the same layers, and benchmark whether the four public VLA-quantization releases can be reproduced. We benchmark the methods on an NVIDIA H100, an L4, and a Jetson AGX Thor. Our results show that while quantization reliably saves memory, 2-3x for real low-bit models, VLA-specific PTQ methods underperform compared to simpler generic baselines. At 4 bits, RTN, AWQ and GPTQ match or exceed ActQuant and QuantVLA, plain RTN matches the calibrated methods, and plain AWQ matches the success QVLA reports for itself. Standard LIBERO hides the losses that do exist: configurations with no significant LIBERO loss lose 1.5-4.3 points under paired LIBERO-plus perturbations. Speed is a weaker story. At batch 1 on the H100, no quantized pi0.5 or OpenVLA-OFT configuration is faster than its 16-bit model (1.06-1.58x slower on library kernels); only the L4 with int8 kernels gains (4-14%), the Thor is slower on every 4-bit configuration, and the engine alone changes latency by 2.1x. Profiling explains why: pi0.5's quantized backbone is compute-bound, while its memory-bound action expert, 63% of GPU time and 13% of the parameters, stays in 16 bits.

Closest papers

Nearest neighbours by meaning across the whole index.

VLAQuantBench: Closed-Loop Evaluation of Post-Training Quantization for Vision-Language-Action Models

cs.RO cs.AI ·2026-09-21 ·Jiuyi Xu, Qing Jin, Meida Chen, Song Wang, Yang Sui +1 more
benchmarkcode/datahighly cited similarity 0.79
Abstract · 28 pages, 35 tables, 4 figures

Post-training quantization reduces the memory requirements of vision-language-action (VLA) models, but precision selection must account for the interaction between layer scope, numerical format, and calibration. We introduce \textbf{VLAQuantBench}, a controlled evaluation with 409 runs and 94,574 simulation episodes: four models on LIBERO, with X-VLA additionally evaluated on three simulation benchmark families. Under uncalibrated W4A4 round-to-nearest quantization, expanding a $π_{0.5}$ action-head subset from 126 to 167 layers raises success from 7.0\% to 70.5\%. Fixed-observation replay confirms a corresponding numerical recovery. Two-episode calibration removes the severe joint failures in the tested subsets, whereas the same smoothing-and-clipping recipe lowers $π_0$ success and does not recover OpenVLA-OFT end-to-end. For OpenVLA-OFT, protecting one 28,672-parameter output projection instead restores near-baseline success: the remaining 441 eligible linear layers retain W3 on LIBERO-Long or eight-bit activations across all four suites. Task-clustered intervals support the large failure and recovery contrasts. These results establish recipe-dependent interactions and identify concrete precision assignments, rather than universal layer-sensitivity rules. Real-kernel and physical-robot measurements complement the accuracy analysis. Code, configurations, and episode records are publicly available at https://github.com/jiuyixu25/VLAQuantBench.

0.70

Where Is VLA Inference Time Spent? Bottlenecks and Optimization Interactions Across GPUs

cs.RO ·2026-11-04 ·Muhammad Danish Waseem, Ahmed Ali-Eldin Hassan
similarity 0.75
Abstract

Vision-language-action (VLA) models map camera observations and language instructions to robot actions. However, their large backbones and repeated action generation can make inference take longer than the robot's real-time requirements for its next action. To reduce the load of VLA computations, researchers have proposed multiple optimization approaches, including quantization and pruning. These optimizations can be combined with other general optimizations such as better kernel compilation or using CUDA graphs instead of the eager mode. However, most of these optimization results are usually reported on a single GPU type, typically for a few VLA models, with no analysis of what the real bottlenecks are for a model on a particular hardware or how these optimizations would generalize beyond the reported results. In this paper, we provide a comprehensive measurement study of seven families of inference optimization methods, from CUDA graphs and compilation to token pruning and quantization, on seven state-of-the-art VLAs evaluated on four GPU families ranging from a datacenter H100 to an embedded Jetson Thor. We analyse how CPU launch overhead, memory bandwidth, and kernel efficiency jointly shape optimization gains, and how applying one method changes the benefit of another. From this analysis, we derive VLA-Triage, guidelines for stacking optimizations under latency budgets. The guidelines identify which stages can provide the required savings and which combinations need testing in the deployed execution mode.

0.20

Towards Green AI: Evaluating Energy Efficiency for Quantized LLM Inference

cs.LG cs.AIcs.CY ·2026-10-13 ·Petar Basta
similarity 0.71
Abstract

While it is known that quantization of large language models (LLMs) reduces memory usage via lower-bit weights, studies quantifying the resulting impact on energy usage and carbon intensity are scarce. We present the first unified evaluation of weight-only quantization strategies for LLM inference across varying input/output lengths and GPUs, highlighting differences in energy efficiency in addition to accuracy degradation and runtime. We study quantized inference on Llama 2 7B, Phi 3.5 Mini Instruct, OLMo 1B, Qwen 2.5 7B, and Qwen 2.5 14B across GLUE MNLI, MMLU, HumanEval, and GSM8K datasets, evaluating 10 post-training quantization (PTQ) strategies on NVIDIA H100, A6000, A100, and L4 GPUs. We identify a novel trend showing that quantization techniques tend to exhibit peak energy efficiency relative to full-precision baselines when inputs are sufficiently long and outputs are short. Furthermore, we show that quantization strategies become marginally more energy-efficient relative to full-precision models as batch sizes increase, though gains are modest. Notably, fused-kernel implementations such as EETQ int8 and Bitsandbytes int8 offer the highest energy savings, up to 4x compared to FP32 on short text generation, with negligible accuracy loss. Finally, we observe that energy usage closely tracks runtime on our evaluated benchmarks, indicating that, in practice, latency optimization can serve as a reliable proxy for reducing the environmental footprint of LLM services. We conclude with suggested directions for strategically selecting low-carbon quantization strategies based on specific inference requirements.

0.10

FoldQuantVLA: Native Low-Bit Quantization of Vision-Language-Action Models via Consistent Folding

cs.RO cs.AIeess.SY ·2026-09-21 ·Hung T. Ho, Khanh D. Nguyen, Quang D. Nguyen, Thanh Q. Duong, Ngan Le +3 more
code/data similarity 0.71
Abstract · 8 pages, 5 figures, 7 tables. Code: https://github.com/cair-vinuni/FoldQuantVLA

Low-bit vision-language-action inference must reduce observation-to-action latency while preserving robot behavior. We present FoldQuantVLA, a post-training quantization framework that carries a consistent activation representation through calibration, weight rounding, and native integer execution. It combines channel scaling and block Hadamard transforms with dynamic per-token quantization, without policy retraining. Custom TensorRT plugins execute projections in both the language backbone and iterative action expert with four-bit weights and activations (W4A4) on Ada GPUs and Jetson AGX Orin. Evaluation spans LIBERO, SimplerEnv, and two robot platforms. Across three GR00T checkpoints and $π_{0.5}$, W4A4 achieves $1.20$ to $1.33\times$ speedups over floating-point TensorRT on Orin and $1.25$ to $1.52\times$ on desktop. Retaining language attention-output and feed-forward down projections at eight bits (W8A8) improves held-out action fidelity on all four checkpoints. Across four real-robot tasks, this configuration raises observed GR00T N1.7 success from $80.0\%$ with uniform W4A4 to $92.5\%$ over 80 trials per configuration, with a measured additional Orin latency of 1 ms.

0.63

Quantize by Doing: Task-Guided Mixed-Precision Quantization of Vision-Language-Action Models

cs.RO ·2026-10-28 ·Jiuyi Xu, Xiao Hu, Meida Chen, Song Wang, Yang Ye +1 more
code/data similarity 0.69
Abstract · 13 pages, 3 figures, 8 tables

Post-training quantization (PTQ) reduces the memory footprint of vision-language-action (VLA) models, but lowering bit widths while maintaining task performance remains challenging. Existing work has used sensitivity estimates from calibration data to assign bit widths to different model components. However, using task success directly to guide mixed-precision allocation is underexplored because closed-loop evaluations are costly and the effect of quantizing one component depends on the precision of other components. To this end, we propose \textbf{QbD-VLA}, a task-guided mixed-precision quantization method that uses task success from short closed-loop evaluations to assign weight and activation bit widths while accounting for interactions between model components. Experiments covering four VLA models and all four LIBERO suites show strong task performance at average precisions of approximately 4 bits for weights and fewer than 6 bits for activations. On SIMPLER, the gain over uniform quantization is small. On a Franka Research 3 robot arm, simulation-selected allocations show no detected success-rate loss on X-VLA but fail on $π_{0.5}$. These findings support using task success to guide mixed-precision VLA quantization, while highlighting the need for real-world evaluation before deployment. Code is available at \href{https://github.com/jiuyixu25/QbD-VLA}{\texttt{github.com/jiuyixu25/QbD-VLA}}.

0.26

QATFactory: A Versatile, Deployment-Aligned Framework for Quantization-aware Training and Distillation of LLMs

cs.LG ·2026-09-30 ·Weili Xu, Jisen Li, Yuqing Jian, Chenxi Li, Zhizhou Sha +6 more
benchmarkcode/data similarity 0.69
Abstract · Preprint, code at https://github.com/QATFactory/QATFactory

Large language model (LLM) inference is increasingly moving toward lower precision to realize the throughput of hardware accelerators, but aggressive post-training quantization (PTQ) can degrade model quality. We present QATFactory, an open-source framework for deployment-aligned quantization-aware distillation (QAD) and reinforcement learning (QARL). QATFactory simulates deployment-time quantization while performing matrix multiplications in BF16, allowing models to adapt to quantization noise without requiring training hardware that natively supports the target format; for example, it supports NVFP4 training on H100 GPUs, which lack FP4 Tensor Cores. The framework supports NVFP4, MXFP4, and $\text{llama}.\text{cpp}$'s Q4_K format; dense and mixture-of-experts models; and both full-parameter and LoRA-based training. It exports checkpoints directly to vLLM and $\text{llama}.\text{cpp}$ without an additional lossy conversion step or added inference overhead. With QATFactory, we conduct extensive experiments on models ranging from 8B to 230B parameters and evaluate exported checkpoints in production inference engines. Across models and formats, QAD consistently improves deployed-model quality over strong PTQ baselines. On Qwen3.5-9B, QAD achieves average benchmark accuracies of 68.9% under NVFP4 and 66.0% under MXFP4, outperforming the best PTQ results of 65.4% and 56.4%, respectively. Through our experiments, we found that although both FP4 formats quantize weights and activations at deployment, the best training strategy is format-dependent: NVFP4 generally performs better when only weights are quantized during training, whereas MXFP4 benefits from quantizing both weights and activations. At a fixed training token budget, training on fewer 32K sequences improves average accuracy by 1.9 points over training on more 4K sequences.

0.45

SACQ: Structure-Aware Codebook Quantization for Ultra-Low-Bit Vision-Language-Action Models

cs.CV cs.LGcs.RO ·2026-10-30 ·Haesung Lee, Insu Han
similarity 0.69
Abstract

Vision-Language-Action (VLA) models enable capable robot behavior, but their large memory footprint limits deployment on resource-constrained robotic platforms. Weight quantization is a natural remedy, yet post-training quantization (PTQ) recipes inherited from large language models degrade when applied to VLAs at ultra-low precision. Existing low-bit PTQ methods often fail to explicitly account for the structure of downstream operations and allocate precision without considering its effect on the policy actions. We introduce SACQ, an ultra- low-bit weight-only vector-codebook quantization framework for VLAs. SACQ combines (1) structure-aware codebook fitting with role-specific quadratic metrics that reflect input statistics and downstream sensitivity; (2) action-aware mixed-bit allocation based on the increase in final-action error as individual layers are compressed; and (3) two-stage post-quantization refinement that reassigns codeword indices with second-order error compensation and calibrates codebooks and row-group scales against the decoded action. Using GR00T N1.7, SACQ achieves 93.85% average success across four LIBERO suites at 1.5 bits per language/action weight while reducing model memory by 4.83x. With INT8 activation quantization and low-precision attention, it retains 93.55% success while running 1.51x faster than BF16. On SimplER, SACQ further achieves 63.76% and 52.27% success under Visual Matching and Variant Aggregation at 2 bits per language/action weight, compared to 58.90% and 53.45% for BF16, respectively.

0.08

EdgeVLN: Runtime-Aware Deployment Ready Quantized Vision Language Navigation Model

cs.RO cs.CV ·2026-09-28 ·Rithvik Jonna, Man Namgung, Aakash Gurram, Tinoosh Mohsenin
similarity 0.69
Abstract

Vision-language navigation (VLN) models perform well but target compute-rich platforms, limiting deployment on memory- and power-constrained robotic edge devices. Compression alone does not establish whether a VLN model fits the memory, latency, and energy budgets of an edge platform while preserving navigation behavior. We introduce EdgeVLN, a runtime-aware, deployment-ready quantized VLN model that closes this gap. EdgeVLN combines a quantized StreamVLN model with Latent Trajectory Termination Extractor (LATTE), a lightweight causal transformer that improves real-time stopping by predicting a Stop Action verifier rank. Both execute through our llama.cpp VLN driver, which reconstructs streaming context and prunes memory tokens on-board. We characterize a pretrained StreamVLN backbone across weight quantization from 8 to 2 bits and multiple inference runtimes to identify a feasible operating point. LATTE reuses backbone hidden states within the budget freed by quantization, requiring neither a second vision encoder nor an additional backbone forward pass. We evaluate six backbone precisions and seven candidate stop heads on BF16 and IQ4 NL across all 1,839 R2R VLN-CE val-unseen episodes. We measure success rate (SR) in simulation and latency, energy, and resident memory on an NVIDIA Jetson Orin NX 16 GB. LATTE achieves our highest SR, 58.02 percent on the deployed 4-bit model, exceeding the BF16 baseline with only 0.013 s additional latency per navigation step. Four-bit formats achieve nearly identical SR, but step energy varies 36.8 times by execution path. Only IQ4 NL under our VLN driver fits the board, using 11.35 GB resident memory while running 20.8 times faster and using 13.3 times less energy than storage-streamed BF16. INT2 collapses. Runtime selection, memory-token pruning, and quantization are essential for efficient edge deployment.

0.24