CS Paper Radar

What Sets the Serving Speed of Looped Language Models? Measurements and Optimizations Graded by Exactness

Dezhen Lu, Runguo Li, Zixiang Ni, Yuchen Tang, Xingquan Kong, Jiaxing Yang, Jiarui Guo, Lingxiang Gao

cs.DC ·submitted 2026-11-03 16:25 UTC · v1
code/data

Abstract

Looped language models apply one block of layers many times per token, so a serving engine pays every per-layer overhead once per loop; we measure serving for Ouro and Huginn-0125 in an open-source looped-model engine and grade our optimizations from bitwise-identical changes to those that require an accuracy check. At batch 1, fusing all loop submissions leaves Ouro throughput at 0.99x; the 5689 small kernels per token are the real cost, and fusing them behind rounding fences raises throughput 1.11-1.59x while 1014/1014 requests remain identical. An approximate fusion is no faster and misses a one-point GSM8K rule on 87 questions (61 and 62 correct versus 64), so we do not ship it. Huginn's released defaults avoid dead KV slots, reuse prefix-cache pages, and serve 1.77-3.16x faster than the base engine; Ouro reaches 1.65-2.15x and agent sessions 1.91-3.21x, while Huginn's noise and prefix-reuse changes stay within one point on all 1319 Huginn test questions; Huginn's packed prefill, -0.61 points on the same questions, meets that rule only on its point estimate. Position-keyed noise makes CPU cache reuse exact but still leaves 20 of 128 GPU full hits different, while loop fusion delays prefill admission and a 64-graph cache prevents eager fallbacks. Under prefill-decode disaggregation ExactLoop reaches up to 3.3x the base throughput with peer error handling disabled, and 3.1x in two of three runs with it enabled. Its transfer budget, sized to hold one request's KV in flight, cuts the commit tail from about one second under the earlier budget to 16 ms (base: 2.8 s), removing the polling rounds that the engine's interval would otherwise impose.

Comment
16 pages, 3 figures, 10 tables. Appendix included

Closest papers

Nearest neighbours by meaning across the whole index.

Where KV-Cache Error Lives in Looped Language Models: A Diagnostic Study of Ouro and Huginn

cs.DC ·2026-10-30 ·Dezhen Lu, Runguo Li, Zixiang Ni, Yuchen Tang, Xingquan Kong +3 more
similarity 0.67
Abstract · 11 pages of main text (37 pages including appendix), 5 figures, 37 tables

A looped language model applies one block of layers 4 times per token and keeps a key/value (KV) plane for each loop. We study where storage error changes the next-token distribution and how shared-weight error accumulates, using Ouro-1.4B (4 loops) on GSM8K and MATH and Huginn-0125 (32 loops) on GSM8K-derived chains, with dense, simulated quantization. Per unit of error, values carry 94% of the diagonal Fisher mass, but measured KL is dominated by keys with larger quantization errors. Local second-order prediction follows the measured KL of typical sequences, including 136 held-out chains, but misses a few confident rows, and a local second-order factor for shared weights at 32 loops ranges from 1.65 (INT8) to 4.09 (INT4), so it depends on the error direction. A cell-level allocator lowers one-step KL at 25-48% of BF16 bytes, while paired task-accuracy comparisons depend on budget and the 25% gap against K4V2 shrinks to near zero under a post hoc answer-extraction check. A later Ouro-2.6B test retains the key/value split but falsifies measured-cost allocation's advantage over Fisher at 31%; across all 21 ledger registrations, 60 of 176 criteria failed.

0.17

The Inference Engineering Pareto Atlas: Which Optimizations Dominate the Cost, Quality, and Latency Frontier?

cs.AI ·2026-09-15 ·Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar +1 more
similarity 0.65
Abstract

LLM inference optimizations report speedups on different models, GPUs, prompts, and quality metrics, making them hard to compare or combine. We build a cost, quality, and latency Pareto atlas to identify the best configurations for different deployment constraints. Since exhaustive testing is impractical, we measure 54 configurations of Qwen2.5-7B-Instruct running on vLLM 0.12 across L4, A100, and H100 GPUs and use these anchors to calibrate a simulator. It reproduces measurements at anchored batch sizes, with cross campaign drift below 1.5 percent. A separate quality evaluation tests FP16, AWQ 4bit, FP8 weights, and FP8 KV cache on 200 GSM8K questions with five examples per prompt. Sparse attention is evaluated only in simulation. On the calibrated grid, 18 of 36 configurations reach the Pareto frontier. Combined methods reach it more often than individual methods, with 9 of 15 combinations versus 9 of 21 single methods. Quality testing changes the winners. AWQ 4bit reduces per token latency to 0.34 times baseline on L4 but loses 5.9 percent of strict GSM8K accuracy, narrowly missing the 95 percent quality floor within sampling uncertainty. Flexible answer extraction matches FP16 accuracy, suggesting the loss comes from formatting rather than arithmetic. FP8 weights retain 99.4 percent of baseline accuracy at 0.61 to 0.65 times baseline latency across all three GPUs and appear in three of four regime winners. A naive FP8 KV cache maintains normal throughput but answers none of the 200 questions correctly, showing why speed alone is insufficient. Under two prompt designs, n gram speculative decoding measures at 0.90 to 0.98 times baseline and adds no benefit on this stack. The best choice depends on the constraint and GPU: H100 wins for tight latency, while A100 wins for throughput and low cost at 0.106 dollars per million tokens.

0.16

Twice as Fast, Until It Isn't: Quantized Serving of Mid-Size Open LLMs

cs.AI ·2026-11-03 ·Smit Kadvani, Kriti Faujdar, Spurthi Tallam
benchmark similarity 0.65
Abstract

A team serving a 9B-20B open-weight language model on vLLM or SGLang must choose a quantization recipe, and needs two numbers: the speedup over BF16 and the accuracy given up. We assemble every public measurement of these numbers that we could verify and find that the record supplies them only in pieces. Only two checkpoints, both INT4 builds of Gemma 3 12B, have both a vLLM timing and an accuracy score, and that score covers a single MMLU subject, one that the AWQ build was calibrated on. The batch-1 timings predate current engine releases, AMD and Intel Gaudi have no timing in this band at all, and FP4 has none against BF16. The timings that do exist follow one rule. Decoding a small batch is limited by memory bandwidth, so 4-bit weights roughly double speed (2.12x for Qwen2.5-14B on an A100), but the gain vanishes once a large batch makes the GPU compute-bound (1.02x for Gemma 3 12B at batch size 256), where FP8 is the recipe that can still help. Many published accuracy deltas, including every HumanEval delta, lie within benchmark sampling noise. We close with a seven-item reporting checklist for future measurements.

0.29

What Does a Token Cost? A Mixture-of-Agents Measurement of Sufficient Per-Token Compute

cs.AI ·2026-10-01 ·Zhixu Du, Weijia Han, Hai Helen Li, Yiran Chen
similarity 0.64
Abstract

Large language models spend the same amount of computation on every token they generate, regardless of how difficult each token is to produce. Methods such as speculative decoding and model routing are built on the premise that much of this computation is unnecessary, yet the computation an individual token actually requires has not been measured. We measure it through a Mixture-of-Agents (MoA) lens: a panel of fifteen language models of increasing capacity, drawn from three families, in which every agent attempts to reproduce a reference sequence token by token, conditioned on the correct preceding tokens. We define the inference cost of the smallest agent that succeeds as the token's sufficient compute, which upper-bounds what the token requires. On three core benchmarks, a 0.5B agent reproduces 92--95\% of reference tokens. Across Qwen, OLMo, and R1-distilled panels, the most expensive 10\% account for 64--80\% of estimated FLOPs. On all 500 MATH-500 problems, the MoA-derived map helps model routing reduce projected latency from 7.59 to 5.12 seconds while slightly improving accuracy, relative to the best confidence-routing baseline. The MoA-map helps drafting use 32.6\% fewer draft tokens and approximately 20\% lower projected latency than fixed-window drafting at similar accuracy. These comparisons reveal remaining allocation headroom, motivating controllers that exploit sufficient-compute structure.

0.18

Green Code or Costly Code? Evaluating the Energy Costs of Iterative LLM-Based Code Optimizations

cs.SE cs.AI ·2026-10-23 ·Sadra Emami, Benjamin Weigell, Mohammad Reza Mousavi, Gunel Jahangirova, Hugo Araujo +1 more
top venuebenchmarkcode/data similarity 0.63
Abstract · Accepted at the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027)

Large Language Models (LLMs) are increasingly used to optimize code for performance. This practice often assumes that improvements in execution speed naturally translate into overall lower energy consumption. We challenge this assumption empirically by measuring whether performance-optimized code produced by LLM self-refinement pipelines is also energy-efficient relative to canonical human reference solutions, and whether the energy cost of the optimization process can be offset by subsequent execution-time savings. We evaluate 11 open-source models across four decoding configurations on all 1,000 problems of EffiBench, a state-of-the-art performance benchmark, while collecting per-process, hardware-level energy measurements throughout. Inference energy spans 0.79 to 8.68 MJ across model-variant pairs, which is roughly equivalent to the energy of 250 to 2800 GPT-4.1 queries. Limiting the maximum number of output tokens has the largest impact, reducing energy use by up to 69% compared to the default configuration. On the execution side, 42 of 44 configurations produce code that consumes more energy per problem than the canonical human reference, with overheads ranging from +4% to +886%. The two exceptions achieve only marginal gains, with break-even points on the order of 10^6 to 10^7 executions. Mixture-of-Experts architectures consume substantially less inference energy than equivalently-sized dense models without sacrificing correctness, making architectural choice a more consequential sustainability lever than decoding parameters. Performance optimization and energy efficiency are not always aligned goals: LLM self-refinement consistently produces faster-seeking but energy-heavier code relative to what a human engineer would write. All artifacts are available at https://doi.org/10.5281/zenodo.23598170.

0.41

Where Activation Sparsity and KV-Cache Sparsity Cross in LLM Decoding

cs.LG cs.CLcs.PF ·2026-09-27 ·Jungseob Lee, Seungyoon Lee, Seongtae Hong, Sugyeong Eo, Heuiseok Lim
code/datahighly cited similarity 0.63
Abstract · 22 pages, 6 figures, 17 tables

At each step, decoding one sequence with a large language model rereads the projection weights, whose traffic is fixed, and the key-value (KV) cache, whose traffic grows with context. Activation sparsity trims the first term and KV-cache sparsity the second, yet their reported speedups are hard to compare because each depends on context length and on the dense attention kernel it is measured against. We derive a byte crossover, the context length at which the two savings are equal, together with ideal speedup bounds for each branch and for their composition, from model dimensions and keep ratios alone. We then time both branches and their composition from 2K to 128K tokens on two GPUs after a dense prefill of real text, with dense and sparse modes reading the cache through the same split-K attention kernel. The projection branch leads at short context and the KV branch at long context, with speedups that follow their byte bounds up to fixed kernel costs. Adding these costs, measured in separate sweeps, lets the byte account predict the measured crossings of three keep-ratio pairs, a second model, and a second GPU to within 4.1K tokens. Timing the dense baseline with masked instead of split-K attention inflates the apparent speedup of the same KV policy about fivefold. An attention-scored KV selection answers the same passkey and multi-key placements as dense decoding up to 127K tokens, whereas a KV window misses most of them. Under matched perplexity budgets, activation sparsity composed with this selection decodes 14 to 26% faster than the best single branch on both GPUs. Code is available at https://github.com/js-lee-AI/ByteCross.

0.57

Running Fewer Loops Removes Refusal Behaviour in Recurrent-Depth Language Models

cs.AI ·2026-10-10 ·Seyedarmin Azizi, Erfan Baghaei Potraghloo, Arya Fayyazi, Saeid Shokoufa, Massoud Pedram
similarity 0.63
Abstract

A recurrent-depth language model reuses one block of weights several times in a row. The number of repetitions, which we call loops, is chosen when the model runs, not when it is trained, and running fewer is cheaper and faster, so a deployment may choose to do it. Running fewer loops also makes these models less safe, and the loss of safety is larger than the loss of anything else we measured. We study four released Ouro checkpoints and Huginn-0125. At half of its trained depth, Ouro-1.4B-Thinking still solves 0.692 of the GSM8K maths problems, against 0.775 at full depth, keeping 89% of its accuracy. Over the same reduction, the rate at which it helps with harmful requests rises from 0.038 to 0.205, 5.3 times higher. The information is not lost: a linear classifier reads whether a request is harmful from the model's internal state after a single loop, with an ROC AUC of 0.967 against 0.986 at full depth. What the missing loops remove is the refusal that should follow. We measure the effect with four instruments, one generating no text at all, and reproduce it on a second model family. Removing a single direction from Ouro-1.4B's internal state at full depth drops its refusal rate on harmful prompts from 0.950 to 0.130, identifying what the shallow model is missing. Two run-time repairs do not help: the models' early-exit rules do not spend more loops on harmful requests, and choosing a depth per request does not recover the loss. Changing the training does. Standard safety training makes the shallow model safe only by refusing 0.865 of harmless requests, while training at randomly chosen depths reaches a separation of +0.399 between harmful and harmless refusal at one loop, against +0.118. On Huginn-0125 it keeps harmful help at or below 0.040 at every depth from 1 to 32 loops, where standard training reaches 0.194, and it costs no accuracy at full depth.

0.25

TableTune: Measured, Self-Correcting Draft-Length Tables for Dynamic Speculative Decoding

cs.ET cs.AI ·2026-10-28 ·Abhishek Malvankar, Paul Castro, Nick Mitchell
similarity 0.63
Abstract

Speculative decoding speeds up large language model (LLM) serving only while the GPU has spare compute, so the best draft length, the number of tokens a small drafter guesses per step, shrinks as the batch grows. vLLM lets operators set the draft length for each batch size with a hand-written table, but nothing measures or corrects that table. We present TableTune. Its tuner times the decoding step for every batch size and draft length on vLLM's own serving path and computes, in minutes, the table that maximizes throughput. Its controller, a vLLM plugin, tracks how many guesses are accepted in live traffic and rebuilds the table while serving. We measure TableTune only against other ways to speculate. On an H100, the tuned table delivers at least 94% of the throughput of the best fixed draft length at every load in four of five drafter settings (88% in the fifth) without the operator having to know which length that is. Against reimplementations of TurboSpec- and Nightjar-style control on the same engine, its worst-case loss is never higher than theirs, and with the EAGLE-3 drafter it is 3% against 9% and 12%. On a mixture-of-experts model, vLLM's documented table loses up to 18% and the tuned table at most 3%. Starting from mistuned tables, the controller raises throughput by up to 58% (up to 45% on vLLM's default runner), and after a workload switch with the DFlash drafter it recovers 96% of a stale table's loss. In llm-d's optimized-baseline deployment as shipped, two Qwen3-32B replicas on four GPUs, the tuned table is up to 32% faster than a fixed draft length of 3 and up to 25% faster than vLLM's documented table at high load, and the controller raises the documented table's throughput by up to 29%.

0.31