CS Paper Radar

Post-Inference Model Chaining: A Problem Statement and a Model-based Bootstrap for Training End-to-End Digital Twins

Lukas Madenach, Timo Bailer, Tobias Eilert

cs.LG stat.ME ·submitted 2026-11-03 17:11 UTC · v1
unusual

Abstract

End-to-end digital twins can be constructed by fitting separate stage models and connecting them after inference. We investigate the Frequentist prediction properties of a commonly used Monte Carlo simulation scheme that forwards complete predictive draws through such a chain when measured stage outputs contain independent normal errors, but the latent stage means are deterministic. Analytical two-stage examples show persistent asymptotic interval and coverage inflation and, with quadratic propagation, mean bias dependent on the parameters to be estimated. Simulations of four- and eight-stage linear-quadratic univariate chains with 7, 15 or 30 training runs demonstrate pronounced input-dependent distortions. A diagnostic using error-free latent training predictors shows that the effect is mainly not attributable to errors in variables, but to the MCSim approach even showing underestimation of coverage. We propose a model-based bootstrap: an initial chain forwards fitted means, bootstrap chains are refitted on fixed-center bootstrap data while forwarding their mean prediction, and a target-stage future error enters a studentized prediction root. Across the investigated scenarios, relative mean bias is substantially reduced, and coverage is closer to the nominal 90%. At sample size 30, the eight-stage bootstrap has mean width ratios of 1.16-1.42 relative to the known-parameter normal reference, compared with 4.11-4.97 for observed-to-observed MCSim. These results support improved endpoint prediction in the tested setting. Further investigations of the bootstrap scheme in the supplement for a bivariate 6-stage process show similar satisfactory results.

Closest papers

Nearest neighbours by meaning across the whole index.

Learning with Synthetic Data via SGD in High-Dimensional Linear Regression

cs.AI stat.MLcs.LG ·2026-09-09 ·Jichu li, Difan Zou
similarity 0.57
Abstract

Synthetic data has become a promising way to scale model training beyond limited human-generated data but it may also induce strong model collapse (Dohmatob et al., 2024), where any fixed fraction of synthetic data prevents model performance from improving under data scaling, leaving a non-vanishing excess risk floor. In this paper, we study how synthetic data affects the generalization of one-pass SGD in high-dimensional linear regression with model shift. We establish finite-sample risk bounds for mixed and two-stage training, separating standard bias and variance from source-mismatch effects, namely fluctuation and persistent drift under mixing and filtered initialization bias under two-stage. These bounds reveal a sharp contrast: mixed training induces strong model collapse, while two-stage training avoids the floor by using synthetic data only in the first stage, showing that collapse is not inevitable under a simple data curriculum. Under a random sketch model, we further obtain scaling laws for both protocols, with tight results for mixed training in the optimization-saturated regime. These laws show that larger models may amplify synthetic-induced degradation under mixing, and quantify how high-quality synthetic pretraining may reduce bias in two-stage training. Finally, we establish an exact finite-sample necessary-and-sufficient condition for two-stage training to strictly outperform real-only training under the same real-data budget and identical real-stage updates. Overall, our results highlight that synthetic data is neither inherently harmful nor beneficial; its effect depends critically on both its quality and the training protocol used to incorporate it.

0.33

When Can LLM Digital Twins Reduce Human Measurement? From Behavioral Fidelity to Statistical Substitutability

cs.AI stat.AP ·2026-09-07 ·Steven Wang, Kyle Hunt, Shaojie Tang, Kenneth Joseph
similarity 0.56
Abstract

LLM-based digital twins promise to reduce repeated human data collection by generating person- specific responses, yet existing evaluations provide little evidence about whether they can reduce human measurement while preserving valid inference. To address this, we introduce statistical substitutability, an inferential criterion that evaluates the extent to which twin predictions can reduce human measurement for a particular estimand while preserving valid inference. We develop a framework, grounded in mixed-subject and prediction-powered inference, that evaluates statistical substitutability along four dimensions: aggregate fidelity, paired respondent-level signal, finite-sample human-label recovery, and stability across populations. Across two empirical evaluations spanning behavioral experiments, multiple models, and alternative respondent representations, we find that digital twins can reproduce average human effects while providing little information about which individuals differ from those averages. Newer models and richer respondent information improve some dimensions of performance but do not reliably translate into human-data savings. Human calibration can reduce aggregate prediction error, yet limited labeled samples often fail to produce stable precision gains. Importantly, these findings demonstrate that behavioral fidelity is neither necessary nor sufficient for statistical substitutability. More broadly, they suggest that AI-generated evidence should be evaluated based on its ability to support valid scientific inference rather than its ability to reproduce human outcomes alone. Digital twins should therefore be judged for confirmatory use by whether they reduce uncertainty about human quantities, not merely by whether they reproduce human means, distributions, or effects.

0.61

How Well Do Prior-Data Fitted Networks Amortize Bayesian Inference?

cs.LG stat.ML ·2026-10-09 ·Manuel Hülskamp, Julius Kobialka, Emanuel Sommer, Thomas Nagler, David Rügamer
hot direction similarity 0.56
Abstract

Prior-data fitted networks (PFNs) are trained to approximate the Bayesian posterior predictive distribution (PPD) of a synthetic prior, yet results about the approximation quality are surprisingly thin. Taking an empirical risk minimization perspective, we decompose the deployment error of PFNs into prior, context, and amortization error, and measure the latter against a reference PPD under a realistic prior. Results show that PFNs generally recover the targeted PPD very well. Nevertheless, we find that parts of the residual amortization error persist, especially in \textit{rare} settings under the prior pretraining distribution, even when scaling the model size, which manifests in disagreement between independently pretrained PFNs and leaves uncertainty about the predictor at inference time. As a remedy, we study multiple types of Bayesian model averages and find that these can consistently reduce this uncertainty and improve predictions up to full-size TabICLv2 models.

0.35

Physics-Guided Inferencer-in-the-Loop Digital-Twin for Real-Time Adaptive Emulation of Nonlinear PMSMs

eess.SY ·2026-10-28 ·Songyang Zhang, Yuzhong Zhang, Venkata Dinavahi
similarity 0.55
Abstract

A real-time digital-twin (RTDT) of a permanent magnet synchronous machine (PMSM) allows drive controllers to be tested in hardware-in-the-loop (HIL) before they meet the real machine. Its machine model rests on identified parameters or flux look-up tables (LUTs) from finite-element analysis (FEA) or characterization tests; the maps are regenerated offline when the machine changes, and online estimators track a few parameters such as resistance and PM flux. This article makes the executed model learnable from reference data. A physics-guided machine learning (PGML) network advances the currents and predicts torque in one step, trained with analytical one-step labels. In the proposed Inferencer-in-the-Loop (IIL) architecture, a GPU retrains the network while a field-programmable gate array (FPGA) executes the last accepted weights. For damper circuits, shifted parameters, and an FEA-calibrated saturated machine, one kernel form reaches average normalized mean absolute errors (NMAEs) of 0.19%-0.67% at measured FPGA kernel latencies of 0.30-0.34 $μ$s, and retraining for a shifted machine nears its final loss within 94 s. On a magnetically linear 200-W drive, a residual form corrects the analytical step and learns its physical parameters from operating data; each step takes under 2.5 $μ$s, 20 times faster than real time and ahead of the physical drive's measurements even at 20-kHz sampling. On six held-out runs (1193 s), its $i_q$ error is 5.9%-9.4% of measured RMS, against 10.4%-13.2% for an independently fitted grey-box model, and over 30 min of loaded heating its online-updated heads track a 4.1% winding-resistance rise with an RMS error of 0.44 m$Ω$.

0.29

Grounding Time-Series Foundation Models in Digital Twin Topology for Predictive Maintenance

eess.SP cs.AI ·2026-09-30 ·Sizhe Ma, Katherine A. Flanigan, Mario Bergés
benchmarkhot direction similarity 0.54
Abstract · Submitted to Reliability Engineering \& System Safety (RESS)

Digital twins increasingly support downstream analytical tasks that depend on time-series data, motivating interest in time-series foundation models (TSFMs) as scalable backbones. However, TSFMs are primarily pretrained for temporal continuation and often underperform on unseen tasks such as regression, and systematic empirical comparisons against state-of-the-art dedicated models in digital twin contexts remain limited. This paper makes three contributions. First, we benchmark five well-known TSFMs with frozen backbones on remaining useful life (RUL) prediction using the C-MAPSS dataset, finding that multivariate architectures substantially outperform univariate ones, particularly under varying operating conditions. This raises a deeper question: when cross-channel dependencies can be modeled through pretrained weights, target-task adaptation, and digital twin-derived representations, how much does each contribute, and are they complementary? Second, we propose a topology-informed fusion approach in which topological constraints, derived from the asset structure the digital twin stores among its information models, explicitly shape cross-attention, so that fused representations respect the physical system's local connectivity rather than relying on unconstrained all-to-all interactions. Third, we conduct an ablation study across C-MAPSS subsets of varying operational complexity that isolates the three sources and their interactions. The sources prove complementary rather than redundant, and topology-constrained attention outperforms unconstrained fusion, though by a small margin, enabling a frozen TSFM informed by digital twin representations to remain competitive or in some cases exceed state-of-the-art performance on this regression task.

0.57

Bias-Aware Adjoint Calibration and Optimal Control of Stochastic Multiscale Bioprocess Digital Twins

cs.LG stat.ML ·2026-10-07 ·Keilung Choy, Wei Xie
similarity 0.54
Abstract · 35 pages, 8 figures

We develop a bias-aware digital-twin calibration and control framework for multiscale bioprocess models within a biological systems-of-systems (Bio-SoS) paradigm. The digital twin is represented by a stochastic differential equation (SDE) model and calibrated from sparse observations using quasi-likelihood estimation and adjoint sensitivity analysis. SDE generator-based moment expansions characterize truncation-induced parameter bias, while forward-backward adjoints quantify how calibration uncertainty propagates to value functions and policy performance. The resulting parameter-error distribution supports both policy-directed data acquisition and uncertainty-aware policy optimization through a second-order Gaussian-averaged objective. We characterize the asymptotic behavior of the resulting exploration criterion and derive a physical-system performance under the optimized policy. To implement these ideas, we develop an Actor-Simulator algorithm that jointly updates model parameters, selects informative experiments, and optimizes control policies. Numerical studies demonstrate improved calibration accuracy, sample efficiency, and control performance relative to state-of-the-art baselines.

0.29

Rolling Conformal Prediction in Sequential Model Training

cs.LG math.STstat.MEstat.ML ·2026-09-22 ·Chen Cheng, Ruiting Liang, Rina Foygel Barber
similarity 0.54
Abstract · 42 pages, 5 figures

We introduce Rolling Conformal Prediction (rolling-CP), a distribution-free predictive inference method for the setting of sequential model training. Specifically, given a data stream $(X_1,Y_1),(X_2,Y_2),\dots$, at each time $n$ the trained model may depend on the observed history $\{(X_i,Y_i)\}_{i<n}$. This setting arises naturally in modern sequential training, including one-pass training over massive datasets and continual fine-tuning or test-time adaptation of language models during deployment. Rolling-CP first calibrates each incoming observation against the current predictor and then rolls it into future training. In this way, we avoid the need for data splitting. Remarkably, although the models at times $n=1,2,\dots$ may have entirely different properties and accuracy levels, for exchangeable data it is nonetheless possible to establish a guarantee of marginal coverage, with a familiar universal factor-two guarantee (a worst case guarantee of $1-2α$ coverage, as compared to the target level $1-α$), without any assumptions of stability or any restrictions on the model training process. For i.i.d. data streams, we further prove high-probability training-conditional validity uniformly over time; under stability conditions, coverage guarantees sharpen towards $1-α$. Numerical experiments on sequential regression, multiclass SGD, and one-pass neural-network training further demonstrate the practical effectiveness of rolling-CP.

0.33

Decision-Making in Digital Twins: Optimization, Control, and Learning

eess.SY math.OC ·2026-10-12 ·Enlu Zhou
similarity 0.53
Abstract

A digital twin is a virtual representation of a physical system, continuously updated with data from the physical system, enabling dynamic information exchange and decision-making. This bidirectional interaction, which distinguishes digital twins from conventional simulation models, introduces new challenges to simulation-based optimization, control, and learning. This paper reviews recent developments in decision-making methodologies motivated by digital twins. We focus on three interconnected areas: simulation optimization, sequential decision making, and risk-aware decision making. For simulation optimization, we discuss data-driven simulation optimization under input uncertainty, streaming input data, decision-dependent observations, and limited computational and data-collection resources. For sequential decision making, we review the connections among digital twins, stochastic optimal control, and reinforcement learning, with emphasis on Bayesian approaches that update models and policies as new information becomes available. For risk-aware decision making, we discuss distributionally robust and Bayesian risk formulations as alternative approaches for addressing model uncertainty. Throughout the paper, we emphasize the common problem of making decisions while the underlying model is being updated. We conclude by identifying research challenges and opportunities.

0.27