CS Paper Radar

From hydrological laws to catchment models: A process-based model matches deep-learning accuracy on three continents

Xilin Xia

cs.LG cs.AImath.DSphysics.geo-ph ·submitted 2026-11-04 11:45 UTC · v1

Abstract

Dooge asked whether hydrology has laws at the catchment scale. We ask whether a low-dimensional system built under physical laws can match the accuracy of neural networks that outperform process-based models on the same inputs. Three laws constrain a lumped catchment model. Conservation makes it a flux-connected storage network, dissipation fixes the sign of every flux and aggregation determines how the unresolved composition enters the fluxes, through effective laws over threshold distributions and a memory of the forcing. These laws admit four kinds of refinement. A parsimonious model under them, CaRT (11 parameters per catchment), is refined in a loop assisted by AI agents. Each refinement addresses an observed deficit through a hypothesis from the literature. The result, CaRT+, has fourteen states, 35 parameters per catchment and no daily neural network. Most refinements follow from aggregation over thresholds or from variables that carry no water but modulate fluxes. On 602 British and 593 US gauged catchments, single CaRT+ models reach median Nash-Sutcliffe efficiencies of 0.863 and 0.765 in held-out years. A stateful LSTM reaches 0.869 and 0.751 and an entity-aware LSTM 0.862 and 0.754, while three-seed LSTM ensembles remain ahead of the CaRT+ ensemble by 0.003-0.012 in median paired NSE. On 505 drier Australian gauged catchments unused in development, single CaRT+ models reach 0.778 against 0.762 and 0.753 for the two LSTMs. The results suggest that catchment-scale laws exist as laws of form, with the constitutive families shared and only their parameters learned.

Comment
61 pages, 12 figures, 13 tables, plus 19 pages of Supporting Information

Closest papers

Nearest neighbours by meaning across the whole index.

A Gated Catchment Hydrology Model (GCHM) for Physically-Interpretable Rainfall-Evapotranspiration-Runoff Simulation Across Diverse Hydroclimatic Regimes

cs.LG ·2026-10-10 ·M Jawad, HV Gupta, MA Farmani, A Behrangi, GY Niu
similarity 0.71
Abstract

Recent advances in machine learning have improved rainfall-runoff prediction, yet most data-driven models remain difficult to interpret and do not explicitly enforce physical conservation laws. We present the Gated Catchment Hydrology Model (GCHM), a mass-conserving architecture based on the Mass-Conserving Perceptron (MCP). GCHM uses five storage states representing canopy interception, snow, soil moisture, groundwater, and streamflow generation. Constrained gates govern precipitation partitioning, evapotranspiration, infiltration, seepage, runoff, and baseflow while learning context-dependent process relationships. We evaluate GCHM across 50 CAMELS catchments spanning snowmelt-dominated, recent-rainfall, historical-rainfall, and arid regimes, using NOAA AORC meteorological forcing and remotely sensed vegetation and land-surface data. Performance is assessed using the Jawad-Kling-Gupta Efficiency (JKGE) metric, which accounts for stationary and non-stationary hydrologic behavior. We compare the full architecture with ablated variants and recurrent neural network benchmarks. GCHM reproduces streamflow dynamics across diverse hydroclimatic regimes, including arid catchments, while maintaining interpretable states and fluxes. Ablation experiments show that simplified architectures may perform adequately under wet conditions but struggle to represent flow persistence and recession during dry periods, when groundwater storage sustains low flows. Learned gates recover hydrologically plausible relationships governing snowmelt, runoff, seepage, and evapotranspiration. GCHM combines competitive predictive performance with mass conservation and interpretability, providing a foundation for hydrologic modeling and counterfactual analysis.

0.21

RiverScan: Learning to Accumulate on River Networks

cs.LG ·2026-11-13 ·He Zhu, Zhiyi Gao, Youhuan Yang, Han Quan, Ming Li
similarity 0.67
Abstract · 17 pages including references and appendices; 6 figures, 5 tables

Accurate runoff prediction across large river basins requires models to capture heterogeneous local hydrological responses and their accumulation downstream. River-network connectivity provides a natural structure for this task, but using it effectively requires learning how to combine contributions from subcatchments of different sizes. We frame this challenge as learning to accumulate and introduce RiverScan, a spatial operator based on area-weighted selective state-space recurrence. RiverScan recursively combines local temporal representations with accumulated upstream states in topological order. Contributing-area fractions account for subcatchment size, while learned retention controls how upstream information persists downstream. Experiments on 608 stations in the Danube basin show that RiverScan outperforms the evaluated temporal and graph baselines in overall predictive performance. Structural controls and ablations demonstrate that composing heterogeneous subcatchment representations in a manner aligned with hydrological accumulation substantially improves runoff prediction, with the benefits of correct topology growing along the river-network hierarchy. These findings establish physically structured accumulation as an effective inductive bias for hydrological modeling and motivate finer-grained, fully distributed AI-based hydrological models.

0.20

Advancing Mass-Conserving Deep Learning for Distributed Hydrologic Modeling: A Case Study in a Snow-Dominated Watershed

cs.LG physics.geo-ph ·2026-11-09 ·Yihan Wang, Lujun Zhang, N. Benjamin Erichson, Yang Hong, Tiantian Yang
benchmarkhot direction similarity 0.65
Abstract

Recent progress in physics-aware deep learning (DL) has embedded mass conservation within Long Short-Term Memory (LSTM) architecture for hydrologic modeling, improving physical consistency and enabling diagnostics of internal states. However, existing mass-conserving neural networks are primarily developed in lumped formulations. Consequently, previous studies provide only fragmented and often indirect evidence of when and why imposed physical constraints may lead to unrealistic hydrologic behavior. To address this limitation, we propose Physics-Enhanced Conservation-Augmented Net (PECAN), a mass-conserving convolutional LSTM-based framework for distributed hydrologic modeling and diagnosing structural limitations of physics-aware DL models. PECAN is implemented in two variants: (1) PECAN-MC with a strict precipitation-based conservation constraint and (2) PECAN-MCR with a relaxed conservation constraint allowing additional water inputs beyond precipitation. Both variants are trained solely on gauge streamflow and evaluated in a snow-dominated watershed in Colorado. We benchmark PECAN against lumped DL baselines and the distributed process-based Variable Infiltration Capacity (VIC) model. Results show that PECAN achieves competitive outlet streamflow simulation accuracy while producing spatially explicit latent states for interpretation. Comparisons with reference soil moisture indicate that PECAN cell states resemble meaningful temporal soil moisture dynamics. However, analyses also reveal that PECAN misrepresents snow processes by prematurely removing winter snow water storage from the system rather than retaining it for spring release. PECAN demonstrates accurate streamflow simulation at gauges and shows diagnostic potential to expose structural limitations in hydrologic process representation, thereby informing future physics-aware neural network development for hydrology.

0.25

EvoBench: An Evolving, Diagnostic Benchmark Framework for Environmental Modeling

cs.AI cs.LG ·2026-10-26 ·Yiming Sun, Yuan Zhang, Qi Cheng, Yingda Fan, Runlong Yu +2 more
benchmark similarity 0.64
Abstract

Machine learning models are now widely used to predict environmental variable dynamics in domains like hydrology, climate science, agriculture, and ecology. These models are usually compared on fixed benchmark datasets using a single average accuracy score. As models improve, their scores become very close when averaged over large regions and long time periods, so the benchmark can no longer tell them apart, and a single number hides \emph{where} and \emph{when} a model fails. Three failures are common across environmental domains: models get worse as the climate shifts (non-stationarity), models fail at unmonitored sites (spatial extrapolation), and models miss rare but important regimes such as floods and droughts. We present \textbf{EvoBench}, a benchmark framework that shows where a model fails, tracks failures over time, and evolves to focus on model capability gaps. We apply EvoBench to daily streamflow prediction as a case study (\textbf{CAMELS-Evolve}, about 9{,}000 U.S. basins, 1985--2024) and compare an operational physical model (NWM), a conceptual reference (HBV), and several data-driven models. No model wins on every testing scenarios (e.g., in terms of average accuracy, performance at low flows and unmonitored basins). Also we observe that all data-driven models under-predict floods. Additionally, we show that targeted fix based on the reported failures could mitigate weaknesses the benchmark identified in certain scenarios. EvoBench turns model evaluation from a saturated ranking into a moving map of model limitations.

0.21

A Geometry-Informed Neural Operator surrogate of LISFLOOD-FP for rapid pluvial-fluvial flood forecasting: the case of Forlì, Italy

cs.LG physics.geo-ph ·2026-11-02 ·Samuele Maria Garofalo, Fabio Limardo, Simonetta Bodojra, Mohammad Amin Nabian, Mehdi Taghizadeh
similarity 0.62
Abstract · 16 pages, 12 figures, 3 tables

Physically based two-dimensional hydraulic models are too slow for real-time inundation forecasting and large ensembles. We present a time-dependent geometry-informed neural operator (GINO) surrogate of LISFLOOD-FP for the municipality of Forlì (Italy), severely affected by the May 2023 Emilia-Romagna floods. The surrogate is designed for an operational setting in which only river stage gauges and rain gauges are available. A reproducible pipeline turns public regional observations into a physically based training set: each river inflow is driven by the first stage gauge downstream of it through a calibrated water-surface boundary condition, and rain enters as SCS-CN effective rainfall. The surrogate is an autoregressive GINO trained on 216 simulations of 24 observed events with scaled forcing. It predicts volume-conserving polygon-mean depths on an exposure-based Voronoi mesh of 659 nodes, with a 20 min step over 72 h. The surrogate is tested on 38 independent observed events that it never saw during training. On these events it reaches a critical success index (CSI) of 0.934 at 0.05m and 0.844 at 0.3 m, a depth RMSE of 0.008m and an $R^2$ of 0.984 for maximum-depth maps. On one NVIDIA A10G GPU a 72-h forecast takes 1.7 s instead of 55 s with LISFLOOD-FP, and a 50-member ensemble, computed in a single batched rollout, takes 6.2 s instead of about 46 min, which makes probabilistic flood forecasting practical. These results show that neural-operator surrogates can deliver accurate pluvial-fluvial flood forecasts driven by river stage for operational early warning.

0.22

Distributed Hydrological Modeling in the Feature Space

cs.CV cs.LG ·2026-09-26 ·Mohamad Hakam Shams Eddin, Maria Luisa Taccari, Yikui Zhang, Shijie Jiang, Juergen Gall +1 more
similarity 0.62
Abstract

Accurate forecasting of river discharge and floods is very challenging. River dynamics are affected by storage, meteorological forcing, and flow propagation at different spatial and temporal scales. Forecasting thus requires a framework that considers the upstream-to-downstream flow through river networks across grid cells and catchments. This modeling is known in hydrology as distributed modeling and routing. Existing deep learning approaches either ignore this topology, operate on lumped catchments, or route predicted physical quantities through a separate graph or physical routing model. We instead introduce feature-space routing: a topology-aware state-space operator embedded directly in the forecasting dynamics. At every forecast step, the operator gathers latent states from upstream grid cells and causally updates the downstream state according to the known river network. This preserves the physical connectivity of the river system while allowing the propagated state itself to be learned end-to-end and allows the model to predict river discharge considering both local dynamics and neighboring upstream contributions. To address uncertainty and provide probabilistic forecasts, we minimize the fair continuous ranked probability score (fCRPS) as a training objective. Our experiments on the European Flood Awareness System (EFAS) and observational data for river discharge forecasting demonstrate that encoding the physical structure of river networks explicitly in the feature space substantially improves the forecasting skill, particularly in an ungauged setting. Our approach achieves state-of-the-art results on both reanalysis and observational data and is able to forecast maps of river discharge at 1 arcminute and 6-hourly resolution up to 10 days lead time.

0.25

HydroTuring: A physics probe benchmark testing mass, energy, and momentum conservation in hydrologic models

cs.AI physics.geo-phcs.LGphysics.app-ph ·2026-11-08 ·Zhi Li, Changming Li, Siavash Shams, Han Wang, Qingyi Yang +15 more
benchmark similarity 0.62
Abstract

Hydrologic models, including deep learning systems now deployed for operational flood forecasting, are evaluated primarily by how closely their simulated hydrographs match observed streamflow. However, high hydrograph skill does not guarantee physical consistency: in a synthetic calibration experiment, a conceptual model that loses 15% of its water input to an unreported sink still reaches a Nash-Sutcliffe efficiency of 0.93, and no shared benchmark tests whether models obey fundamental conservation laws. Here we introduce HydroTuring (v0.1.0), a black-box benchmark of 37 physics probes that test mass (24 probes), energy (7) and momentum (6) conservation in hydrologic models. Each probe runs a controlled experiment on forcing generated at run time from a recorded seed and applies binary pass or fail criteria validated against 18 physically exact and 59 deliberately broken reference models. Across 32 evaluated models (3 exact references, 7 AI-based models and 22 process-based models), only the 3 exact references pass every probe among the 28 models scored on 5 or more probes. Process-based and AI-based models pass similar shares of their scored probes (76% and 74%), and a pre-trained flood-forecasting LSTM fails 6 of the 11 runoff-only probes it can be scored on. Furthermore, 49% of all 1,184 model-probe pairs remain unscored because models omit the required state or flux variables, while the scored failures occur in perturbation responses and state bounds rather than long-term water-budget closure. HydroTuring provides a reproducible smoke test for model development, peer review and operational deployment under an open community protocol.

0.26

C-STRIDE: An Observation-Driven AI Digital Twin for Predicting Basin-Wide Flood Fields from Sparse Stream-Gauge Histories

cs.AI ·2026-09-30 ·Yanjie Tong, Phillip Si, Yuan Qiu, Peng Chen
similarity 0.61
Abstract

Emergency managers need to know where floodwater is, how deep it is, and how it will change over the coming hours across an entire river basin. During a flood, however, real-time measurements come from only a handful of stream gauges, and high-resolution hydrodynamic models are too costly to rerun each time new data arrive or to run as large ensembles. We present C-STRIDE, an observation-driven AI digital twin that turns short records from a few stream gauges, together with terrain and rainfall, into basin-wide maps of water depth and extends these predictions up to a day ahead. It is trained on simulations from a calibrated two-dimensional hydrodynamic model and needs no separate data-assimilation step. In the Des Plaines River basin near Chicago, six gauges inform predictions over 4.2 million 30-m grid cells. Terrain improves the predictions most, rainfall keeps errors from growing over longer horizons, and together they reduce errors by about 40% compared with gauge records alone. When future rainfall is known, errors remain near 15% one day ahead, compared with nearly 40% without rainfall. Given real instead of simulated gauge records, the model shifts its predictions toward the observed hydrographs at three of six gauges without retraining, and it runs about 150 times faster than the hydrodynamic model. These results show how sparse gauges, terrain, and rainfall can be combined into fast, continuously updated flood predictions, a step toward operational flood digital twins that still requires testing with real-time data and rainfall forecasts.

0.48