CS Paper Radar

An Empirical Study of Reinforcement Learning for Keypoint Positioning of Deformable Linear Objects

Vinay Rodrigues, Sara Zeynalpour, Gokhan Solak, Sebastian Hjorth, Arash Ajoudani

cs.RO ·submitted 2026-11-05 00:27 UTC · v1

Abstract

Deformable linear object (DLO) manipulation is challenging because high-dimensional configurations, nonlinear contact dynamics, and diverse material and geometric properties produce a broad range of object responses that are both difficult to model and data-intensive to learn. This work studies reinforcement learning for planar manipulation of a one-end-grasped DLO, focusing on training efficiency, observation design, robustness, and zero-shot sim-to-real transfer. We compare three Proximal Policy Optimization training stacks and find that the GPU-parallel MuJoCo Playground stack enables faster convergence and more consistent performance than CPU-based alternatives under the same wall-clock budget. Relative keypoint observations and an asymmetric actor-critic formulation further improve learning efficiency. Policies trained with observation noise, delay, domain randomization, and disturbances achieve simulation success rates of 96.4% for single-point tracking, 98.0% for disturbance recovery, and 88.8% for two-point tracking. Using markerless RGB-D keypoint estimation, the policies transfer without real-world fine-tuning, succeeding in 9/10, 10/10, and 8/10 physical trials, respectively.

Closest papers

Nearest neighbours by meaning across the whole index.

From Prediction to Action: Learning Physical Context for Deformable Linear Object Manipulation

cs.RO ·2026-11-10 ·Chengxiao Dong, Alessio Caporali, Hongyu Lan, Gianluca Palli
similarity 0.79
Abstract · Submitted to ICRA 2027

A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.

0.16

Accelerating Visual Policy Learning with Sampling-Based Model Predictive Control

cs.RO cs.AIcs.LG ·2026-09-17 ·Yilang Liu, Haoxiang You, Qian Wang, Daniel Rakita, Ian Abraham
similarity 0.77
Abstract · 8 pages, 6 figures

Learning visual policies for locomotion and manipulation requires coordinating contact with the environment and can incur substantial computation and GPU memory costs. First-order policy gradients (FoPG) reduce training cost through differentiable simulation, but local optimization can converge to unintended contact patterns. To address this shortfall, we propose Sampling-Guided Policy Search (SGPS), which couples recurring action-target refinement by sampling-based model-predictive control with first-order policy optimization. Behavior cloning initializes the policy from sampled actions; training then alternates sampling-based refinement with short-horizon FoPG updates under perturbed initial states and randomized dynamics. For visual policy training, we use a decoupled FoPG formulation that excludes rendering from the computation graph, enabling direct learning from depth observations without a state-policy teacher. On a single GPU, SGPS learns policies for locomotion, obstacle traversal, crate pushing, and bimanual carrying on simulated Unitree Go2 and G1 robots. Our experiments further show that refinement improves policy learning beyond initialization and tracking alone. For hardware deployment, the distilled policy transfers zero-shot to a real Go2 and uses onboard depth to autonomously trot, crawl, clear hurdles, and switch between these behaviors.

0.22

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.76
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Multimodal MPC via Bayesian Set Optimization for Dynamic Manipulation of Deformable Linear Objects

cs.RO ·2026-10-22 ·Youyuan Long, Gokhan Solak, Arash Ajoudani
code/data similarity 0.73
Abstract

Dynamic manipulation of deformable linear objects (DLOs) remains challenging due to underactuated, high-dimensional dynamics, delayed deformation responses, and the presence of multiple feasible motions under obstacle constraints. This paper presents BM2PC, a Bayesian Multimodal MPC framework for agile manipulation of DLOs. Building on the control-as-inference posterior, BM2PC formulates multimodal planning as a set optimization problem that balances control quality and behavioral diversity. An efficient incremental update maintains multiple promising control modes with low additional computational overhead. For real-world deployment, BM2PC incorporates an execution dynamics model that predicts actual end-effector motion and compensates for execution mismatch during fast manipulation. We evaluate BM2PC on rope tracking and obstacle avoidance in simulation and hardware, and on simulated disturbance rejection. In trajectory tracking, BM2PC generalizes better to unseen trajectories than a learning-based baseline without task-specific policy training or fine-tuning. Real-world experiments demonstrate accurate long-horizon tracking, reducing RMSE by 44.0% on the longest task. In obstacle avoidance, BM2PC achieves comparable performance to existing multimodal MPC methods while reducing planning time by 29% to 66%. These results demonstrate accurate dynamic control and efficient multimodal planning within a unified MPC framework. The core implementation of BM2PC and supplementary videos are available at https://github.com/Longyouyuan/BM2PC.

0.22

DynaForge: Planning-Guided Residual Learning for Dynamic Manipulation Demonstration Generation

cs.RO ·2026-09-22 ·Yiyang Jin, Yu Zheng, Xiao He, Hesheng Wang
similarity 0.72
Abstract · 8 pages, 6 figures. Under review

Dynamic object manipulation is essential for robots operating in real-world environments, yet methods for generating high-quality demonstrations remain limited. Methods designed for static tasks do not readily transfer to dynamic settings. Among dynamic demonstration generators, planning-based methods can fail near contact, while DOMINO-style replay simplifies dynamic interactions and may limit the experience available for policy learning. We present DynaForge, a planning-guided framework that learns residual corrections for dynamic manipulation demonstration generation. DynaForge combines low-frequency global planning with high-frequency object-centric inverse kinematics across task phases, and applies a residual policy to correct actions during dynamic interaction. An implicit curriculum groups rollouts under matched conditions and selects mixed-success groups, focusing residual reinforcement learning on the evolving competence frontier. On Can and Bottle, it uses 0.73x as many optimizer steps as vanilla GRPO at the same nominal environment-step budget, with higher observed final success rates. Across nine simulation tasks, DynaForge increases mean demonstration-generation success from 41.30% of the planning prior to 78.37%. With 800 demonstrations per task, DP3 policies trained on DynaForge data achieve 49.11% mean success, compared with 7.07% for DOMINO data. On three real-world dynamic tasks, DynaForge-trained policies achieve 30-60% success, compared with 0-10% for DOMINO-trained policies, showing the ability of DynaForge for sim-to-real transfer.

0.24

VAMPS: Visual and Motor Policies from Sampling-Based Planning

cs.RO cs.AIcs.LG ·2026-10-04 ·Mohamed Yassine Kabouri, Pietro Noah Crestaz, Quang-Nam Nguyen, Qilong Cheng, Ludovic Righetti +1 more
similarity 0.72
Abstract

Learning robot policies directly on physical systems remains difficult because data collection is costly and policy exploration can be unsafe. We introduce Visual and Motor Policies from Sampling-Based Planning (VAMPS), a framework that uses Model Predictive Path Integral (MPPI) control to train reusable policies without human demonstrations. VAMPS supports two training modes. For one-step proprioceptive policies, it operates iteratively in simulation: the policy warm-starts MPPI, and the refined trajectories provide new supervision as the policy changes. A learned terminal value improves short-horizon planning, while an Implicit Q-Learning (IQL) critic guides the policy update. Iterative refinement outperforms training once on frozen MPPI data, and we transfer the learned locomotion policy to a Unitree Go2. For visuomotor policies, VAMPS operates directly from real-robot data. MPPI uses task-specific state estimates to plan and execute trajectories while recording RGB and sensor observations on a Flexiv Rizon 10S. Action Chunking with Transformers predicts action chunks, reducing the effective prediction horizon, and is trained offline on this fixed dataset. We demonstrate visuomotor pick-and-place and force-aware whiteboard erasing. In the latter task, the policy additionally observes the measured $6$-D wrench and desired normal force. These results show that VAMPS can learn policies either in simulation followed by hardware transfer or directly from autonomously collected real-robot data.

0.18

SpeedTuning: Speeding Up Policy Execution with Lightweight Reinforcement Learning

cs.RO cs.AI ·2026-08-10 ·David D. Yuan, Tony Z. Zhao, Kaylee Burns, Chelsea Finn
top venuecode/datahighly cited similarity 0.71
Abstract · 10 pages, 12 figures. This arXiv version includes an appendix with qualitative simulation rollouts and additional ablations. Published at IC…

While learned robotic policies hold promise for advancing generalizable manipulation, their practical deployment is often hindered by suboptimal execution speeds. Imitation learning policies are inherently limited by hardware constraints and the speed of the operator during data collection. In addition, there are no established methods for accelerating policies learned via imitation, and the empirical relationship between execution speed and task success remains underexplored. To address these issues, we introduce SpeedTuning, a reinforcement learning framework specifically designed to enhance the speed of manipulation policies. SpeedTuning learns to predict the optimal execution speed for actions, thereby complementing a base policy without necessitating additional data collection. We provide empirical evidence that SpeedTuning achieves substantial improvements in execution speed, exceeding 2.4x speed-up, while preserving an adequate success rate compared to both the original task policy and straightforward speed-up methods such as linear interpolation at a fixed speed. We evaluate our approach across a diverse set of dynamic and precise tasks, including pouring, throwing, and picking, demonstrating its effectiveness and robustness in enhancing real-world robotic manipulation. Videos and code are available at https://daivdyuan.github.io/speed-tuning/

0.95

Grasp-TAGS: Task-Aware Grasp Selection via Critic Distillation for Prehensile Loco-Manipulation

cs.RO cs.AIcs.LG ·2026-11-06 ·Xun Tu, Minghao Zou, Karthik Desingh
similarity 0.71
Abstract · 10 pages, 6 figures

Loco-manipulation, which requires mobile manipulators to coordinate locomotion and manipulation over long horizons, is a key capability for large-object rearrangement in applications such as service robotics and warehouse automation. Despite recent progress, reliably executing these tasks remains challenging because performance depends on complex robot-object and object-environment interaction dynamics. Existing approaches address this challenge either through model-based methods, which often require accurate dynamics models, or through learning-based methods, which reduce this requirement but typically assume a fixed or predefined initial grasp. However, different geometrically stable grasps can lead to substantially different downstream manipulation performance. Therefore, we propose Grasp-TAGS, a task-aware grasp selection framework for goal-conditioned large-object rearrangement. We train a unified PPO-based reinforcement learning policy across multiple initial grasp configurations and distill the learned critic into a lightweight grasp utility network that ranks candidate grasps using only the candidate grasp configuration and goal information. At inference time, we select the grasp with the highest predicted downstream utility for the downstream policy to complete the task, before even making a contact. Experiments demonstrate that Grasp-TAGS improves rearrangement success over both fixed single-grasp policies and random grasp selection, achieving an average success rate of 89.84% compared with 79.87% for the best-performing single-grasp policies, an improvement of 9.97 percentage points. Grasp-TAGS also reduces final orientation errors across all evaluated objects. For more qualitative results, refer to the supplementary webpage: https://rpm-lab-umn.github.io/Grasp-TAGS-web-page/

0.17