CS Paper Radar

Training-Independent Validation of a Learning-Based Controller for Stunt Maneuvers

Kiruthiga Chandra Shekar, Aliasghar Arab, Jingang Yi

cs.RO eess.SY ·submitted 2026-11-05 06:25 UTC · v1
position

Abstract

Learned controllers for vehicle maneuvers are usually validated under the conditions and objective used to train them, where they appear highly reliable, yet the parameters that change on real roads are often not those the model was trained on. We argue that validation must be independent of training: it should vary physical parameters that training kept fixed and use acceptance criteria absent from the training objective. A learning-based control policy, G-Maneuver, with 90.11% success is tested for stunt-level maneuvers. A looser terminal-heading score ranked the worst setting as the best. Because real stunt tests are safety-critical, a simulation-to-reality-to-simulation (Sim2Real2Sim) loop uses the simulation to select safe zones for real-vehicle trials with 16.9% acceptance. Automotive safety analysis frameworks are used to identify parameters for validation using coverage tests. We demonstrated that the kinematic stunt-driving indicators, namely heading change, sideslip, and speed-normalized yaw rate, match between simulation and the real world, while force and roll indicators do not, which identifies the indicators that can support safe deployment. A video of the experiments is available at https://youtu.be/dN1Oes8pNIo.

Comment
9 pages, 7 figures, 2 tables. Video: https://youtu.be/dN1Oes8pNIo

Closest papers

Nearest neighbours by meaning across the whole index.

SCAPE: Scenario-Conditioned Simulation-Augmented Policy Evaluation

cs.RO cs.AIcs.LG ·2026-08-19 ·Dijie Zhu, Seunghun Oh, Ruopeng Huang, Zhiyu Huang, Jiaqi Ma +1 more
similarity 0.66
Abstract · 22 pages

Reliable performance evaluation is a central bottleneck for deploying robot-learning policies in real-world conditions. Real-world testing is faithful but costly and difficult to scale, whereas simulation-based testing scales easily but is inevitably biased by the sim-to-real gap. Existing simulation-augmented methods combine limited real-world rollouts with abundant simulation proxies, but focus on performance averaged over initial conditions and deployment settings. Such population-level averages obscure scenario-specific variation and provide limited guidance about when and where a policy can be safely deployed. We propose SCAPE, a scenario-conditioned simulation-augmented policy evaluation framework that predicts scenario-conditioned real-world policy performance using limited paired sim-and-real samples and large-scale simulation rollouts. SCAPE corrects sim-to-real bias in simulation labels before training the prediction model and calibrates prediction uncertainty through conformal prediction. We validate SCAPE on autonomous driving and quadruped velocity tracking. In sim-to-sim studies, SCAPE reduces scenario-level prediction error by 4.9%/34.7% (driving) and 14.5%/27.7% (quadruped) relative to scene-conditioned neural and aggregate statistical baselines on average. We further evaluate a velocity-tracking policy deployed on a physical Unitree Go2. SCAPE also improves testing sample efficiency, produces narrower calibrated prediction intervals, generalizes better to out-of-distribution scenarios, and enables fine-grained deployment strategies.

0.12

Predictive safety filter enhanced curriculum learning control for efficient vehicle dynamics controller

cs.RO cs.AI ·2026-08-10 ·Baocong Zhang, Siliang Lu, Chenyang Li
similarity 0.66
Abstract

Recent advances in learning-based control have enabled impressive achievements in solving complex control problems in various domains. However, since learning-based control may not be able to realize safety-guaranties, it is of great importance to enhance safety and robustness while maintaining good performances. Take vehicle motion \& dynamics control as an example, in order to overcome the pain points of traditional methods such as heavy parameter calibration effort and learning-based control to bring better performance and efficiency in stability \& agility over prior work for state-based vehicle control tasks, in this work, our method aims to develop a curriculum learning controller enhanced with physics-based predictive safety filter. The validation is conducted with the Python-CarSim platform, demonstrating better improvements and scalability under various maneuvers.

0.04

A Differentiable Chassis Safety Layer for Intelligent Vehicle Motion Control

cs.RO ·2026-10-24 ·Lu Xiong, Xuge Hu, Yufei Song, Weidong Liu, Chen Tang
similarity 0.63
Abstract

Learning-based vehicle motion control requires coordination between diverse task objectives and state-dependent chassis safety constraints. Conventional cascaded architectures may compromise task performance when safety filters modify nominal commands independently of policy learning. This article proposes a differentiable chassis safety layer that modularly integrates task-oriented control with explicit physical constraints. Actuator limits, individual-tire force constraints, and vehicle handling envelopes are incorporated into sequential quadratic programs. Each projected command propagates the predicted vehicle dynamics and updates subsequent constraints, enabling temporal gradient coupling through implicit differentiation. A two-stage learning strategy combines expert imitation with risk-guided supervision and conditional intervention guidance to coordinate nominal control decisions with chassis safety constraints. Closed-loop evaluations under unseen scenarios, emergency maneuvers, and ablation studies demonstrate that the proposed method improves safety-performance coordination and exploits vehicle dynamic potential while maintaining handling stability.

0.23

ExtremeDrive: A Real-World Dataset and Benchmark for Critical Driving

cs.RO eess.SY ·2026-11-16 ·Xinhan Li, Yuhong Jiang, Shiyue Zhao, Junzhi Zhang, Chengkun He +5 more
benchmarkdataset similarity 0.63
Abstract

Existing autonomous driving datasets and benchmarks provide extensive resources for routine driving, yet real-world data covering safety-critical scenarios and extreme environmental conditions remain limited. To address this gap, we present ExtremeDrive, a real-world dataset and benchmark covering emergency maneuvers, complex traffic interactions, and adverse conditions such as slippery or snow-covered roads, alongside routine driving. The dataset comprises 589 driving scenes curated from a larger pool of real-world driving recordings, with calibrated and aligned multisensor data and reviewed annotations of road structure and traffic participants. We further establish a benchmark to evaluate planned trajectories through simulated vehicle execution, measuring safety-related metrics and driving performance. Experiments at equal training set sizes show that incorporating critical driving data reduces trajectory prediction errors and improves mean critical-success rates in critical scenarios. ExtremeDrive provides a unified resource for learning and evaluating autonomous driving in safety-critical scenarios and extreme environmental conditions.

0.29

Sim-to-Real Aware End-to-End Learning Environment for Micromobility

cs.RO ·2026-09-24 ·Shouma Amano, Takuya Azumi
similarity 0.63
Abstract

While end-to-end autonomous driving systems show promise, their application to micromobility vehicles is hindered by simulators failing to capture specific kinematics, such as differential drives and omni-wheels. This paper pro- poses a sim-to-real-aware, vehicle-specific end-to-end learning environment for the WHILL Model CR on AWSIM and ROS 2. To minimize the sim-to-real gap, physical parameters are optimized via Bayesian optimization using real-world data, reducing trajectory errors across various driving scenarios. Additionally, this study introduces a synchronized architecture tailored for the stable training of world model-based agents. An end-to-end policy trained with DreamerV3 exhibited learning progress and achieved task completion in a simulated obstacle avoidance setting. Furthermore, this policy demonstrated direct sim-to-real transfer to the physical vehicle, enabling the vehicle to navigate around a cardboard box in a real-world corridor replica without fine-tuning. This paper provides a practical foundation for sim-to-real micromobility policy studies.

0.16

Comfort by Construction: Adaptive, Comfort-Bounded Action Spaces for Learned Driving Policies

cs.RO cs.AI ·2026-09-11 ·Anna Rothenhäusler, Daniel Jost, Raghu Rajan, Faris Janjos, Oliver Scheel +2 more
similarity 0.62
Abstract

Data-driven driving simulators command accelerations and steering rates from a fixed grid without constraining the realized accelerations and jerks. As a result, reinforcement-learning policies inflate safety metrics through abrupt, last-second maneuvers that lie far outside the range of human driving and would be unacceptable to occupants of a real vehicle, so the metrics measure simulator permissiveness rather than policy quality. Enforcing comfort bounds naively is not enough: lateral limits shrink quadratically with speed, so clamping a static grid saturates it and destroys fine-grained control ("grid collapse"). We propose an adaptive action parameterization that rediscretizes the grid at every step to span exactly the per-step feasible control set, via closed-form inversion of the lateral-jerk constraint. We further present PufferDrive-Editor, a browser-based tool to audit realized kinematics and author kinematically challenging scenes. On the Waymo Open Motion Dataset and a hand-authored slalom, our adaptive model holds comfort violations below 1% while outperforming clipped-grid and direct-jerk baselines in navigability.

0.20

DriveReferee: Geometric Safety Verdicts Need Not Be Learned for Driving World-Action Models

cs.CV ·2026-09-19 ·Fengcheng Yu, Dhruv Parikh, Junjie Ye, Maulik Bhatt, Thang Vu +3 more
hot direction similarity 0.62
Abstract

Generative world-action models (WAMs) jointly generate future video and vehicle actions, while their action branches remain primarily optimized by expert imitation. Yet imitation provides no explicit closed-loop geometric verdict for generated trajectories, making verification important during both training and deployment. Closed-loop evaluators can check collision and drivable-area violations, but require privileged scene state unavailable at deployment. Existing approaches often close this gap by learning a verifier from sensor features. For these geometric checks, the rule itself is explicit. For example, collision is determined by whether the rolled-out ego footprint overlaps occupied vehicle space. What is unavailable at deployment is the scene state needed to apply the rule. We introduce DriveReferee, which uses a learned geometry readout to predict the scene representation from camera observations and executes the geometric safety rule directly rather than learning it. The resulting analytic referee evaluates collision and drivable-area safety from a scene state and candidate trajectory. During training, it scores self-sampled trajectories on ground-truth state and distills the resulting preferences into the WAM policy. At deployment, the same referee evaluates generated trajectories on this predicted state and selects a safer alternative when needed. The analytic referee requires no verdict-specific training, and its decisions follow an explicit geometric rule. Under matched candidates and inference budgets, it matches or outperforms all learned-verifier and heuristic baselines. Given the same predicted state and trajectory, learning the verdict provides no measurable downstream gain despite requiring tens of thousands of evaluator-labeled training examples. On the full NAVSIM navtest, DriveReferee reaches 92.02 PDMS with single-camera visual input and no external training data.

0.43

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.62
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32