CS Paper Radar

Bidirectional Modeling of mmWave Human Signals for Enhancement & Synthesis

Shuntian Zheng, Hoang Hai Pham, Jiaqi Li, Xiaoman Lu, Shuai He, Yu Guan

cs.HC ·submitted 2026-11-06 01:53 UTC · v1

Abstract

Millimeter-wave (mmWave) is attractive for human-centered robotics in smoke, darkness, and privacy-sensitive indoor spaces: it measures reflections rather than visually identifiable imagery and remains usable without light. Deployed systems, however, face two complementary needs that run in opposite directions. Enhancement starts from a raw range-angle-Doppler (RAD) heatmap, where human returns coexist with nonhuman structure, and aims to isolate the human signal by removing nonhuman returns, yielding a clean RAD input for downstream perception. Synthesis starts from denser human geometry and aims to synthesize natural RAD observations, including environmental and hardware features, thereby expanding scarce supervision data. Although the two tasks reverse direction, both require modeling how human and nonhuman reflections coexist in the same measurement. Among RAD axes, Doppler provides motion information native to the modality, with the potential to support this modeling. We therefore cast both tasks on the dual-domain RAD heatmap and propose HeatWave, which injects Doppler when it is locally reliable, and routes Doppler asymmetrically for enhancement and synthesis within one shared backbone. This design improves both tasks: enhanced observations reduce mean per-joint position error by 11.4% relative to the raw recording, and synthesized samples that replace half of the real radar labels recover most of the activity accuracy lost to the reduced budget. Relative to an unspecialized dual-task heatmap baseline, the enhancement improves motion-critical samples under metallic clutter by 2.3times more than when geometry already suffices, and synthesis follows the same ordering with a narrower spread, providing the community with a research direction more closely aligned with the signal's characteristics.

Closest papers

Nearest neighbours by meaning across the whole index.

Doppler-aided Position-Velocity Tracking of Hidden Objects using mmWave Radar

cs.RO cs.CV ·2026-10-25 ·Yerin Cheon, Kush Garg, Akshat Dave
benchmark similarity 0.64
Abstract · 8 pages, 8 figures

Safe indoor operation requires autonomous tracking of objects that are not directly visible to the robot. Optical non-line-of-sight (NLoS) methods depend on ambient lighting and scene geometry or on weak multi-bounce returns that need long acquisitions. Millimeter-wave (mmWave) radar offers an attractive alternative: walls act as reflectors for mmWave signals, and frequency-modulated continuous-wave (FMCW) radars enable fast, practical measurement of range, angle, and velocity. However, the low resolution of these radars leads to spatially ambiguous observations. The Doppler information, although particularly sensitive to target motion, remains underexplored in indoor NLoS localization: existing methods emphasize spatial representations and either collapse or discard the Doppler dimension before learning. To leverage the complete Range-Azimuth-Doppler (RAD) information, we acquire the first indoor NLoS radar dataset that pairs sequential RAD measurements with synchronized position and velocity ground truth under controlled variations in motion: 576 sequences totaling 720,856 frames across 12 trajectories of a mobile robot moving along varying speeds, starting positions, and material configurations. We then formulate NLoS tracking as sequential position-velocity estimation rather than frame-wise localization: a shared 3-D encoder processes the full RAD representation of consecutive frames, separate recurrent branches estimate position and velocity, and post-inference refinement combines the two into a motion-consistent trajectory. Our method achieves 8.95cm position and 1.75cm/s velocity errors on held-out trajectories and generalizes to unseen scenarios involving a moving human target. Together, our dataset and tracker establish a benchmark for tracking hidden moving targets with a low-cost radar.

0.19

mmTherm: Absolute 3D Human Pose Estimation from Low-Resolution Thermal Images and mmWave Radar

cs.CV ·2026-11-17 ·Zhaoxin Chang, Badii Jouaber, Daqing Zhang
similarity 0.63
Abstract

Absolute 3D human pose estimation (HPE) aims to recover both a person's body pose and their global position in 3D space. Privacy-preserving millimeter-wave (mmWave) radar provides distance and direction measurement capabilities, but its sparse point clouds make HPE under-constrained. Low-resolution thermal imaging can provide complementary observations of body direction and structure. However, our evaluation shows that a strong feature-level fusion baseline loses much of its localization and HPE advantage when generalizing to unseen subjects, with radial localization becoming less accurate than a radar-only baseline. Motivated by this finding, we introduce mmTherm, a lightweight framework that explicitly incorporates the complementary geometric properties of thermal imaging and mmWave radar. It combines body structure and joint directions estimated from thermal images with range information from radar to localize the body and reconstruct its 3D pose. Experiments on OctoNet show that mmTherm reduces cross-user absolute joint error by 33% and root localization error by 38% relative to the strongest corresponding baselines, while requiring substantially fewer parameters and less computation at inference.

0.09

What Limits mmWave Human-State Sensing for Robot Perception?

cs.RO cs.HC ·2026-11-06 ·Shuntian Zheng, Guangming Wang, Hongyang He, Shuai He, Yu Guan
similarity 0.61
Abstract

Assistive robots and search-and-rescue platforms require reliable human state sensing in smoke, darkness, and privacy-sensitive environments, where cameras and LiDAR may be unreliable Millimeter-wave radar offers an alternative that works without ambient light, penetrates smoke, and does not capture visual appearance. However, the compact arrays that fit robot size, power, and cost budgets have limited apertures, producing joint-localization errors on the order of decimeters at a few meters, large enough to compromise the safety margins and tracking accuracy a robot depends on. Existing pipelines reduce pose error through frame fusion, multiple viewpoints, return selection, or stronger estimators, but examine one technique at a time, without relating its effect to a shared measurement limit or separating gains from added information from gains from estimator completion. We address this gap with a framework that models the human and environment as one time-varying scattering field and states a Cramer-Rao type error floor for joint localization as a function of bandwidth, aperture, signal-to-noise ratio, fused frame count, phase coherence, and visibility of retained returns. We then use existing frame fusion, multi viewpoint, return selection, and pose estimation methods as matched probes of this floor rather than as competing pipelines. Under the evaluated conditions, experiments on three datasets and a live deployment show these strategies move joint localization error in the predicted directions, for example lowering mean per-joint position error from about 97 to 65 mm with a second viewpoint, while a stronger estimator mainly lowers overall error by completing joints the measurement cannot resolve. These results give the robotics community a principled basis for deciding whether to prioritize observation design or estimator capacity when deploying reliable mmWave human sensing.

0.28

RadPose: ISAC-based RF 3D Human Pose Estimation

cs.CV cs.NI ·2026-11-01 ·Geo Jie Zhou, Kunzhe Song, Ruxin Lin, Huacheng Zeng
publishedcode/data similarity 0.59
Abstract · Accepted to WACV 2027

Human pose estimation under adverse lighting and occlusion conditions remains challenging for camera- and LiDAR-based systems. Although mmWave radars provide robustness to illumination and occlusion, they rely on dedicated hardware and licensed spectrum, limiting scalability. In this paper, we present RadPose, a learning-based monostatic integrated sensing and communication (ISAC) framework that enables mmWave communication devices to perform 3D human pose estimation. Unlike specialized radars, RadPose leverages monostatic full-duplex operation to extract channel impulse responses (CIRs) directly from standard OFDM communication signals, generating 3D radio point clouds without additional sensing hardware. To address the sparsity and noise of RF observations, RadPose employs a cross-frame transformer-based pose inference network with semantic-guided spatial attention and target-driven temporal attention for robust spatio-temporal aggregation. It further adopts a joint-aware inverse kinematics refinement module based on graph convolution to enforce skeletal topology, bone-length consistency, and anatomical plausibility. Extensive experiments demonstrate RadPose achieves competitive accuracy compared to state-of-the-art radar-based approaches while maintaining robust performance in unseen and occluded scenarios. The dataset and source code are available at https://github.com/Geo-Chou/RadPose.

0.46

Physics-Bounded mmWave Sensing for Schedulable, Privacy-Preserving Human Pose Estimation

cs.HC ·2026-08-14 ·Shuntian Zheng, Hongyang He, Jiaqi Li, Xiaoman Lu, Doeon Kim +4 more
similarity 0.58
Abstract

Millimeter-wave (mmWave) is a promising modality for human pose estimation (HPE) in mobile deployments with strong privacy requirements and limited resources, such as fall detection in bathrooms or activity monitoring in bedrooms, where cameras are inadmissible and computationally demanding processing is infeasible. Although mmWave signals naturally confine human reflections to compact, physically bounded regions, the algorithmic foundations of existing systems fail to provide deterministic execution and accuracy guarantees. They either process the full spectrum uniformly, resulting in unpredictable latency that varies across different scenes, or apply lossy compression that discards vital pose structures. To address this, we present PRISM, a framework that exploits the spatial concentration of RF reflections to achieve schedulable edge HPE. PRISM introduces three core components: 1) Physics-Bounded Integral Processing (PBIP), which restricts computation via constant-time integral queries; 2) Physics-Adaptive Instance Proposal (PAIP), which decomposes scenes involving multiple people into bounded local subproblems; and 3) Deadline-Aware Operation Profiles (DAOP), which provide offline-verified worst-case bounds for runtime quality-latency trade-offs. We evaluate PRISM on four public datasets spanning diverse radar configurations, reporting physical-bound and pose-accuracy measurements across this suite and examining deadline-aware scheduling on multi-person recordings together with an additional single-person set. Under single-threaded isolated execution, PRISM reduces 99th-percentile latency by 24\%--58\% relative to baselines that miss the deadline, records a 0.0\% miss rate on the evaluated traces, and attains the highest pose accuracy among deadline-feasible configurations, providing a practical route toward schedulable mmWave sensing on mobile edge hardware.

0.04

mmHRI: Towards Privacy-Preserving Human-Robot Interaction with Millimeter-Wave Radar

cs.RO cs.CV ·2026-09-28 ·Junqiao Fan, Yuxuan Hu, Bofan Lyu, Yanshuo Lu, Pengfei Liu +5 more
similarity 0.57
Abstract

Assistive robots increasingly operate in many human-centered environments and perform various human-robot interaction (HRI) tasks, such as object delivery. However, most existing HRI systems rely on RGB cameras that continuously observe humans to respond to non-verbal commands, such as hand gestures. This raises privacy concerns in privacy- critical environments, such as hospital wards or restaurants, where direct camera observation of humans is restricted. To develop privacy-preserving HRI, we leverage millimeter-wave (mmWave) radar, which can sense human motion through privacy barriers without identifiable imagery. We propose mmHRI, the first multi-modal robot manipulation framework that achieves mmWave radar-guided privacy-preserving HRI. mmHRI introduces two key designs to mitigate the sparsity and temporal inconsistency of radar data in cluttered robot manipulation environments. First, we propose a dual-stream architecture that jointly learns from unfiltered raw radar tensors and radar point clouds to estimate both human actions and 3D poses. To mitigate signal inconsistency, mmHRI further incorporates a memory-based state-space model (MSSM) that retains historical radar features to reduce abrupt changes in pose/action. These estimated human states are then converted into structured textual robot instructions, which control a vision-language-action (VLA) policy for closed-loop robot manipulation and human-aware reactions. Our evaluation covers human action recognition and closed-loop delivery and retrieval. In the privacy-preserving curtain setting, mmHRI achieves 85.09% action-recognition accuracy, outperforming existing radar-based alternatives. Robot trials further demonstrate successful delivery and retrieval under visual occlusion, with stable task performance across unseen subjects, clutter configurations, and environments.

0.56

4D Point Splatting for mmWave Radar Micro-Doppler Differentiable Rendering

cs.CV cs.GRcs.LGeess.SP ·2026-11-05 ·Adnan Armouti, Guanyue Qian, Rajalakshmi Nandakumar
similarity 0.57
Abstract · Under Review

Millimeter-wave radar resolves the micrometer displacements of a moving body as micro-Doppler, enabling gait, gesture, activity, pose and vital-sign sensing. Each task relies on a downstream model trained on real data, yet radar datasets lag orders of magnitude behind vision and language. Brute-force collection will not close that gap, and existing synthesis methods (forward-only simulators, learned generators and static-scene inverse renderers) cannot fit a real capture of a moving body, leaving a sim2real gap. We present 4D Point Splatting (4DPS), a physics-based differentiable renderer that fits an explicit moving scene to a real capture. Using the synchronized camera to initialize the room and body, we represent the scene as oriented points carrying material, normal and velocity, and splat each point into range and Doppler bins. Our output is the raw complex return a real radar records, so we apply the same signal processing on the rendered data to obtain any representation for training any SOTA downstream model. We fit 235 sequences on HuPR and 100 on RT-Pose, two datasets with different radars. Our reconstructions set the state of the art, with median correlations of 0.940 and 0.830 on range-azimuth, 0.829 and 0.695 on range-Doppler, and 0.988 and 0.966 on micro-Doppler. Our renders also set the state of the art in downstream sim2real gap. On RT-Pose, a pose model trained on them reaches 21.9 cm MPJPE on real data, against 16.7 cm for real training and 127.6 cm for the RF-Genesis baseline, where both the rendered- and real-trained models learn nearly the same features. Our custom CUDA kernels fit a sequence in 5.7 minutes on HuPR and 12.9 on RT-Pose on one H100, making dataset-scale inverse rendering of mmWave radar possible for the first time. This work can enable synthetic data generation for any human-centered downstream task and model, and scene editing for data augmentation.

0.33

mmIR: Frequency-Space Inverse Rendering for 3D Millimeter-Wave Radar ADC Synthesis

cs.CV cs.GRcs.LGeess.SP ·2026-08-28 ·Adnan Armouti, Yixuan Gao, Rajalakshmi Nandakumar
top venuecode/data similarity 0.55
Abstract · Accepted to the European Conference on Computer Vision (ECCV) 2026. Project page: https://mmwave-inverse-rendering.github.io/

High-resolution 3D radar data is scarce. Commodity mmWave sensors use small antenna arrays that limit angular resolution to several degrees, and existing datasets provide only 2D range-azimuth maps or sparse point clouds rather than raw analog-to-digital converter (ADC) signals. Hardware scaling is expensive, synthetic-aperture scanning is impractical at fleet scale, and learned synthesis methods are bottlenecked by the very data shortage they aim to address. We present mmIR, an open-source differentiable frequency-modulated continuous-wave (FMCW) radar inverse renderer that fits a physics-based forward model to real captures and re-renders from dense virtual apertures to synthesize high-resolution 3D radar data. Because radar resolution is too coarse to recover geometry directly, mmIR performs LiDAR-assisted inverse rendering: using LiDAR-derived meshes as a geometric scaffold, mmIR optimizes per-vertex International Telecommunication Union (ITU) physics materials, vertex normals, and antenna beam patterns through end-to-end automatic differentiation of a phase-coherent multiple-input multiple-output (MIMO) forward model with multi-bounce propagation, polarization, and free-space diffraction. On seven outdoor and six indoor ColoRadar scenes, mmIR achieves 0.914 mean Pearson correlation on range-azimuth maps versus 0.307 for Sionna-RT. Scenes trained on a cascaded imaging radar transfer to a co-located single-chip radar without re-training (0.554 correlation), and dense virtual arrays (100x100 elements) produce single-frame 3D occupancy validated against LiDAR. Project page: https://mmwave-inverse-rendering.github.io/

0.75