CS Paper Radar

Reconciling European Electricity Data with Diffusion Priors Learned from Observations Alone

Matthias Pirlet, Adrien Bolland, Gilles Louppe, Damien Ernst

eess.SY cs.LG ·submitted 2026-11-06 10:22 UTC · v1

Abstract

The ENTSO-E Transparency Platform publishes generation, load, and cross-border power flows for European bidding zones. The values carry undocumented errors and violate energy conservation, and data reconciliation consists in correcting them to satisfy that balance. In this work, we formulate data reconciliation as Bayesian inference. Classical methods implicitly take a uniform prior, which we replace with a diffusion model estimated from the observations alone by empirical-Bayes expectation-maximization. The resulting posterior is sampled with a guided process whose projection step makes every sample satisfy the balance exactly. On synthetic systems of six to thirty-five bidding zones, built from ENTSO-E resource-adequacy data, the diffusion prior gives the most accurate reconciliation, increasingly so as the system grows. Its credible intervals are calibrated or conservative, and it remains the most accurate under a misspecified noise covariance. Finally, when the generation of entire zones goes unreported, the classical methods fail while the learned prior recovers it from cross-zone structure.

Closest papers

Nearest neighbours by meaning across the whole index.

Bayesian Distribution System State Estimation with Flow Matching

cs.LG cs.AIeess.SP ·2026-10-29 ·Nan Lin, Peter Palensky, Pedro Vergara Barrios
similarity 0.56
Abstract · 10 pages

Medium-voltage feeders have few real-time measurements, so distribution system state estimation (DSSE) rests on pseudo-measurements of the secondary substations, a prior in Bayesian terms. Weighted least squares keeps the power flow exact but reduces this prior to a mean and variance, while supervised deep learning estimators also learn the power flow and are tied to one measurement set. We propose PoSE (posterior sampling for state estimation), which keeps the Bayesian structure of DSSE and learns only what the distribution system operator does not know, namely the distribution of substation injections, modelled by a neural network trained with flow matching on historical data. The power flow equations, grid topology and measurements enter only at sampling, through a noise-aware Kalman-type correction. The neural network therefore never approximates the power flow, but every posterior sample is a physically consistent operating point, and one trained prior serves any measurement set, noise level and topology. On the IEEE 33-bus feeder, PoSE lowers the probabilistic injection error (CRPS) by 6.7-7.5% against a full-covariance Gaussian prior in all 12 tested settings. It provides reliable uncertainty: the 90% intervals contain the true injection almost exactly as often as exact posterior samples would, whereas those of supervised estimators contain it in only 37-78% of cases. On the 240-bus unbalanced three-phase Iowa feeder, it gives the lowest injection, voltage and branch-current errors of all estimators. A fast variant matches this accuracy at 0.2-0.6s per snapshot and, without retraining, beats Gaussian priors and retrained supervised estimators on seven reconfigured topologies.

0.17

Probabilistic Forecasting of Electric Vehicle Charging in a Time-varying Hierarchical Infrastructure

cs.LG stat.APstat.ML ·2026-10-09 ·Guillaume Principato, Yvenn Amara-Ouali, Yannig Goude, Bachir Hamrouche, Jean-Michel Poggi
similarity 0.56
Abstract · 34 pages, 11 figures, 6 tables

Uncertainty quantification for electric vehicle (EV) charging demand is essential to turn the increasing pressure of EV adoption on power systems into a source of flexibility. We study a large-scale dataset of public charging stations in Scotland, where demand exhibits a hierarchical structure, organized across multiple aggregation levels, from individual charging points to regional and national scales. The charging infrastructure is continuously evolving, with new stations deployed and existing ones occasionally removed, which calls for forecasting and uncertainty quantification methods tailored to this evolving structure. To address these challenges, we combine hierarchical forecasting with recent advances in conformal prediction with missing data. The conformal procedures considered produce valid prediction intervals at every node of the hierarchy and the algorithm CP-MNR-Nested successfully accounts for the time-varying hierarchical structure of the data.

0.25

LoaDiff: Conditional Generation of Electricity Consumption Time Series for Energy Analytics

cs.LG cs.AIeess.SP ·2026-09-10 ·Mariia Baranova, Adrien Petralia, Etienne Le Naour, Nathan Etourneau, Guillaume Hofmann +1 more
top venue similarity 0.56
Abstract · 10 pages, 5 figures. This paper appeared in IEEE ICDM 2026

The energy transition is reshaping residential electricity consumption through the increasing adoption of distributed generation, electrified appliances, and demand-response programs. Understanding these evolving behaviors requires access to granular smart-meter data for applications such as load forecasting, appliance detection, and demand-side flexibility analysis. However, such data are subject to strict access restrictions and data-protection regulations. Thus, realistic synthetic alternatives are necessary. In this paper, we introduce LoaDiff, a diffusion-based generative model for year-long, sub-hourly smart-meter load curves. LoaDiff supports flexible conditioning on static household attributes, such as appliance ownership, and dynamic contextual variables, including calendar information and outdoor temperature. We evaluate the model against multiple generative baselines on three residential electricity-consumption datasets. Our experiments assess four complementary dimensions: fidelity and diversity, training-record memorization risk, downstream utility for load forecasting and appliance detection, and conditional controllability under alternative temperature conditions. The results show that LoaDiff generates realistic and diverse load profiles, achieves a favorable trade-off between generation quality and limited evidence of memorization, preserves information useful for downstream energy applications, and responds coherently to changes in conditioning variables.

0.44

Accelerating posterior sampling in Bayesian inverse problems with diffusion models: an online-offline perspective

cs.LG math.NAmath.STstat.ML ·2026-10-31 ·Duc-Lam Duong
similarity 0.55
Abstract

Bayesian inverse problems require both informative prior models and computationally feasible posterior inference. Score-based diffusion models provide expressive learned priors, but their use for inversion introduces a conditioning problem: the score of a noised posterior is generally unavailable from a prior score alone. This selective survey reviews the principal approaches to that problem, including likelihood guidance, spectral and projection methods, sequential Monte Carlo corrections, and amortized conditional training. We organize methods by how they split cost between offline preparation and online inference, and compare their assumptions, advantages and limitations, with emphasis on computational speedups. Some ongoing directions and open questions are gathered at the end.

0.05

PhysDEM: Physics-Defined Energy-Matching Diffusion for Spatiotemporal Field Generation under Scarce Measurements

cs.CV ·2026-10-01 ·Zhenyu Liang, Yining Huang, Yubo Zhao, Jack C. P. Cheng
similarity 0.54
Abstract

Generating and predicting spatiotemporal physical fields from scarce measurements is challenging, as observations are insufficient to characterize a distribution over complete fields. This limits conventional data-driven diffusion models that rely on full-field datasets. We introduce PhysDEM, a physics-defined diffusion framework that combines governing equations with spatially sparse observations to generate multiple plausible fields. First, we construct a Gibbs target by reweighting a measurement-conditioned Gaussian reference with PDE residual energy. Second, we derive an exact conditional-mean identity that reduces denoising to supervised learning of the standardized energy-induced mean correction. Third, a physics-displacement probability flow cancels Gaussian reference terms and enables amortized sampling with changing measurements through Gaussian conditioning, without retraining. Experiments on synthetic PDE systems and real-world-informed applications demonstrate that PhysDEM supports coherent field recovery and efficient sampling while maintaining stable diagnostics under tested noise levels, illustrating its practical value for field assessment. To our knowledge, PhysDEM is the first physics-defined diffusion model enabling amortized spatiotemporal field inference without preassembled full-field datasets.

0.27

Flow Matching for Fast Posterior Sampling in Bayesian Inverse Problems

cs.LG math.NAstat.CO ·2026-10-01 ·Jan Blechschmidt, Oliver G. Ernst, Moritz Poguntke, Björn Sprungk
similarity 0.53
Abstract · 38 pages, 18 figures

Sampling from the posterior is the central task of computational Bayesian inverse problems. The standard workhorse in Bayesian inference---Markov chain Monte Carlo (MCMC)---is sequential, yields correlated samples, and must be rerun for each new observation. Conditional flow matching offers an amortized alternative: a transport map, trained once on joint samples of parameter and data, that yields independent approximate posterior samples for any observation at negligible online cost, without new likelihood evaluations. We give a careful, MCMC-literate assessment of flow matching for PDE-based inverse problems with function-valued parameters. Exploiting the flow's tractable density, we derive computable accuracy estimates for the learned posterior in total variation distance and Kullback--Leibler divergence and, moreover, propose a hybrid sampler that is made asymptotically exact by Metropolization. We validate the accuracy estimates and demonstrate amortization in several numerical examples, including electrical impedance tomography and a likelihood-free Lotka--Volterra model. Flow matching reproduces posterior means and credible bands closely at a fraction of the forward solves required by MCMC, but its accuracy degrades for concentrated posteriors and for observations that are atypical under the prior.

0.26

Probabilistic electrical power demand forecasting with uncertainty quantification

cs.LG cs.AI ·2026-09-28 ·Mahesh Neupane, Pragya Dhungana, Pradip Khatri, Swechhya Baskota, Hariom Dhungana
similarity 0.53
Abstract

The majority of research on electricity consumption forecasting has focused on deterministic approaches, which generate a single point estimate for each time step in the forecasting horizon. However, the increasing penetration of renewable energy sources and the growing complexity of modern smart grids have introduced greater variability and uncertainty into power-system demand and operation. Consequently, probabilistic forecasting, which quantifies the uncertainty and variability associated with future electricity demand, is becoming increasingly important for reliable power-system planning and operation. This study presents an empirical comparison of four contemporary probabilistic forecasting models for electricity consumption, highlighting their respective strengths and limitations. We have performed comparision on real-world power systems related datasets. Across all power-consumption zones, NGBoost demonstrates superior probabilistic forecasting performance, achieving the lowest MAE and RMSE while providing well-calibrated uncertainty estimates with high prediction-interval coverage and reasonably narrow intervals. These results indicate that NGBoost offers a more accurate and reliable forecasting framework than Bayesian, Monte Carlo (MC) Dropout, and Gaussian Process Regression (GPR) models for the considered electricity consumption data.

0.16

Conditional Diffusion Models for Amortized Bayesian System Identification

cs.LG eess.SY ·2026-11-16 ·Mike Hänseroth, Niklas Wahlström, Thomas B. Schön, Thomas Seel, Jan-Hendrik Ewering
benchmark similarity 0.52
Abstract · 8 pages, 7 figures

Generative diffusion models rapidly solve Bayesian inverse problems, such as image restoration and inpainting, with a single trained model and without retraining for each new observation or task. Bayesian system identification, which typically involves inferring the hidden states and parameters of a dynamical system from measurements, poses a closely related inverse problem. Yet it is often addressed with computationally heavy Monte Carlo methods that must be rerun for every new measurement record. Moreover, these methods are restricted to a single inference task, and their cost grows with the state dimension and the record length. To alleviate these restrictions, we interpret Bayesian system identification in hiddem Markov models (HMMs) as a general Bayesian inverse problem, taking advantage of conditional diffusion models. Specifically, a transformer-based diffusion model is trained once on short segments of simulated trajectories to approximate the joint posterior of states and parameters. Through an attention mask induced by the Markov property and a relative time encoding, it can then be deployed on any new measurement record of custom length. At inference time, the same model can flexibly and rapidly be conditioned for joint state and parameter inference, state smoothing, parameter inference, or reconstructing missing measurements, without retraining. We demonstrate these capabilities on four benchmark systems and examine how the length of the training segments affects state and parameter inference. On records five times longer than the training segments, the model maintains its state accuracy, whereas comparison methods either show a more than tenfold error increase or require ten times as much sampling time.

0.25