CS Paper Radar

Continuous wavelet-based feature extraction for laser-induced breakdown spectroscopy classification of human plasma samples

Md Mahmudur Rahman, Atqiya Munawara Mahi, Nazim Ahmed Belabbaci, Mohammad Arif Ul Alam

cs.AI ·submitted 2026-11-06 17:17 UTC · v1
unusual

Abstract

Extracting discriminative features from laser-induced breakdown spectroscopy (LIBS) spectra is important for the classification of complex biological samples. This study evaluates continuous wavelet transform (CWT)-based spectral peak extraction for distinguishing human plasma samples labeled as SARS-CoV-2-positive or negative. Plasma specimens from 181 individuals, comprising 53 positive samples and 128 negative controls, were deposited as 5 μL droplets on silicon substrates and dried before analysis. Spectra were acquired using a nanosecond Nd:YAG laser operating at 1064 nm, with 100 single-shot measurements collected per specimen and averaged after intensity-based outlier rejection. CWT-based peak detection was coupled with a support vector machine (SVM) classifier. The reported leave-one-out evaluation yielded an accuracy of 93.00%, sensitivity of 94.67%, and specificity of 91.61%; these estimates remain provisional pending reconciliation with specimen-level predictions. Features identified by the CWT pipeline included emission lines assigned to Ca II, K I, and N I. The workflow provides a basis for examining spectral features associated with the studied plasma groups. Independent validation and assessment of specimen, substrate, and acquisition-related variability are required to establish generalizability and diagnostic relevance.

Closest papers

Nearest neighbours by meaning across the whole index.

SpectralTF-MAE: A Pre-trained Spectral Foundation Model for Tokamak Fusion Plasma Diagnostics

cs.CV ·2026-10-28 ·Xiao Wang, Zhijie Lu, Duoqing Yang, Jiangtao Yu, Jin Tang +5 more
code/data similarity 0.47
Abstract

Spectroscopic diagnostics provide rich information for characterizing plasma states in tokamak fusion experiments, while existing learning-based approaches are often designed for individual tasks and rely heavily on labeled data. In this work, we propose SpectralTF-MAE, a self-supervised spectral foundation model for tokamak plasma diagnostics. The model is pretrained on paired charge-exchange recombination spectroscopy (CXRS) and X-ray crystal spectroscopy (XCS) measurements through masked spectral reconstruction. To better capture diagnostically important spectral structures, we introduce a peak-aware masking strategy together with a peak-enhanced reconstruction objective, encouraging the model to focus on characteristic spectral regions. A shared Transformer encoder is employed to learn transferable representations across different diagnostic modalities. The pretrained model is further adapted to several downstream tasks, including plasma-parameter prediction, cross-diagnostic spectral generation, and spectral peak analysis. Experiments on EAST diagnostic data demonstrate that the proposed framework achieves competitive performance across different tasks and consistently benefits from self-supervised spectral pretraining. These results indicate the potential of SpectralTF-MAE as a general and transferable representation learning framework for plasma spectroscopic diagnostics. The source code and pre-trained models will be released on https://github.com/Event-AHU/OpenFusion/tree/main/SpectralTF-MAE.

0.37

X-LIBS: Interpretable Soil Classification Using Explainable AI and Laser-Induced Breakdown Spectroscopy

eess.SP ·2026-09-19 ·Yingchao Huang, Xin Wang
similarity 0.46
Abstract

Machine learning (ML) has emerged as a powerful tool for soil analysis using Laser-Induced Breakdown Spectroscopy (LIBS). However, traditional black-box models often lack interpretability, limiting their effectiveness in decision-making processes. This study introduced explainable AI (XAI) techniques to enhance both the interpretability and classification performance of Partial Least Squares Discriminant Analysis (PLS-DA) models for soil classification with LIBS. Local Interpretable Model-agnostic Explanations (LIME) was employed to identify the local spectral features associated with soil elements, providing explanations for their contributions to classification outcomes. To improve classification performance on unlabeled spectra, prediction uncertainty was quantified by sequentially removing the top local spectral features identified by LIME as critical to the classification. Higher uncertainty was associated with a smaller number of feature removals needed to change the label. Spectra for which a large number of features had to be removed before the label changed were treated as high-confidence predictions and admitted to a co-training process. Thresholds on this flip count were defined separately for spectrally ambiguous and stable classes to manage uncertainty identification effectively. To address the sensitivity of PLS-DA to class imbalances, equal proportions of pseudo-labels from each class were included in co-training. The proposed method was evaluated on the publicly available EMSLIBS dataset, achieving a test accuracy of 92.69\%, competitive with the best-performing methods in the literature. The XAI results provided insights into the causes of misclassifications and identified the dominant spectral features critical for accurate predictions, advancing interpretable AI solutions for LIBS-based soil analysis.

0.23

Sharpness-Aware Minimization (SAM) Improves Classification Accuracy of Bacterial Raman Spectral Data Enabling Portable Diagnostics

cs.LG q-bio.QMstat.ML ·2026-09-16 ·Kaitlin Zareno, Jarett Dewbury, Siamak K. Sorooshyari, Hossein Mobahi, Loza F. Tadesse
published similarity 0.41
Abstract · Accepted for oral presentation at the ICLR 2024 Workshop on Practical ML for Low Resource Settings (PML4LRS)

Antimicrobial resistance is expected to claim 10 million lives per year by 2050, and resource-limited regions are most affected. Raman spectroscopy is a novel pathogen diagnostic approach promising rapid and portable antibiotic resistance testing within a few hours, compared to days when using gold standard methods. However, current algorithms for Raman spectra analysis 1) are unable to generalize well on limited datasets across diverse patient populations and 2) require increased complexity due to the necessity of non-trivial pre-processing steps, such as feature extraction, which are essential to mitigate the low-quality nature of Raman spectral data. In this work, we address these limitations using Sharpness-Aware Minimization (SAM) to enhance model generalization across a diverse array of hyperparameters in clinical bacterial isolate classification tasks. We demonstrate that SAM achieves accuracy improvements of up to 10.5% on a single split, and an increase in average accuracy of 2.7% across all splits in spectral classification tasks over the traditional optimizer, Adam. These results display the capability of SAM to advance the clinical application of AI-powered Raman spectroscopy tools.

0.64

BAARC: Uncertainty-Driven Adaptive Partial Spectral Measurement to Full Reconstruction for Material Classification

cs.LG ·2026-10-23 ·Adithya Ashok Chalain Valapil, Aishwarya Venkataramanan, Joachim Denzler
similarity 0.40
Abstract

Spectroscopic instruments with limited wavenumber coverage require accurate scan positioning or multiple measurements to complete the material analysis. This often requires prerequisite knowledge about the material under diagnosis to measure the spectral regions with distinguishing peaks. In our study, we simulate a Bayesian Adaptive Acquisition with Reconstruction-driven Classification (BAARC) framework for Raman spectral measurements, using masked training to learn spectral features that dynamically drive laser channel selection until the material is identified. We present a jointly trained two-level framework that takes progressive partial measurements of small wavenumber patches across the complete spectral range and, at each step, first attempts to reconstruct the full spectra until the model uncertainty is low. Secondly, material classification is performed at each reconstruction step until stoppage. Uncertainty quantification during reconstruction steps helps determine the measurement position of our next patch, while combining it with classification uncertainty determines measurement termination. By closing the loop between hardware acquisition and deep probabilistic modeling, the proposed system minimizes physical measurement steps while maintaining both spectral fidelity and diagnostic accuracy. Experimental evaluations demonstrate that our framework achieves high-accuracy sample identification using only a fraction of full-spectrum channels, offering a scalable solution for real-time, high-throughput spectroscopic instruments.

0.24

Interpretable statistical feature engineering for early disruption prediction in the short pulse ADITYA tokamak

cs.LG physics.plasm-phphysics.data-an ·2026-08-23 ·Jyoti Agarwal, Kavit Patel, Bhaskar Chaudhury, Abhishek Sharma, Shrichand Jakhar +1 more
similarity 0.40
Abstract · 27 pages

Reliable early disruption prediction is critical for the safe operation and real-time control of tokamaks. However, machine learning based prediction frameworks have predominantly targeted medium and long pulse devices, with comparatively limited attention given to short pulse tokamaks where available warning time is inherently constrained. In this work, an interpretable machine learning framework is developed for feature engineering and early prediction of disruptions in the ADITYA using the initial plasma evolution information, prior to the activation of the negative converter of the ohmic transformer power supply. Statistical descriptors comprising the mean, variance, skewness, kurtosis and wavelet energy entropy are extracted from routinely available plasma diagnostics over different operation time windows. Decision tree based feature selection is employed to identify physically meaningful disruption precursors and to reduce feature dimensionality. These selected features are used to train a random forest classifier. The proposed framework achieves stable predictive performance across different analysis windows, with a maximum ROC-AUC of 0.87 for 0-35 ms and 0-40 ms windows. Comparable and in some cases improved, performance is obtained using the reduced feature set, demonstrating that the selected statistical descriptors retain the essential information required for disruption prediction. The proposed methodology provides an interpretable and computationally efficient framework for real time disruption prediction in short pulse tokamaks and establishes that carefully engineered statistical descriptors can effectively replace raw time series inputs for early disruption prediction, thereby offering a practical pathway toward real time plasma control in short pulse tokamaks similar to ADITYA and ADITYA-U.

0.29

Self-Supervised Representation Learning: From Spectral Foundation Models to Auroral Emission Spectra

cs.LG physics.space-ph ·2026-09-25 ·Matthieu Le Lain, Gaël Cessateur, Sébastien Lefèvre
benchmarkunusual similarity 0.40
Abstract · 5 pages, 1 figure, 3 tables. Submitted to IEEE ICASSP 2027

Auroral spectrographs such as the Auroral Spectrograph In Skibotn (ASIS) record hundreds of thousands of emission spectra, but only a few hundred can be labelled by an expert. To exploit the rest, we pretrain a 1D Vision Transformer with a masked autoencoder on 223,000 unlabelled spectra. Without labels, its representation recovers the emission-line intensity ratios that physicists use to diagnose the precipitating particles (R^2 0.91 vs. 0.77 for an untrained control) and, under one linear probe, classifies as well as 13 features designed by experts. Fine-tuned, the model outperforms the previous supervised auroral classifier on its own benchmark (macro-AP 88.5 vs. 77.8), reaches 0.870 mAP, and exceeds the same architecture trained from scratch by +0.159 with 10% of the labels; attribution shows that it uses both N2+ bands. Could an existing pretrained model replace it? Two astronomical spectral foundation models and a time-series model transfer according to their spectral window: SpectraFM, trained in the infrared, falls below the untrained control, whereas SpecFormer, trained in the optical, approaches in-domain pretraining without reaching it.

0.28

Hybrid Machine Learning-Assisted Raman Spectroscopy with Generative Feature Augmentation for Pharmaceutical Identification

cs.LG cond-mat.mtrl-sci ·2026-09-18 ·Quach Thi Thai Binh, Ton Nu Quynh Trang, Thang B. Phan, Vu Thi Hanh Thu, Nguyen Tuan Hung
similarity 0.39
Abstract · 12 pages, 7 figures, 2 tables

Rapid and reliable identification of pharmaceutical residues is important for safeguarding public health, ensuring food safety, and enabling practical Raman-based screening. In this study, we propose HyMLRaman, a hybrid Raman spectroscopy framework that combines deep spectral feature extraction, generative models, and classical machine-learning classifiers to identify six pharmaceutical compounds, including amoxicillin, chloramphenicol, ciprofloxacin, tetracycline, ibuprofen, and paracetamol. Raman spectra are converted into spectral images and encoded with several deep neural-network backbones, among which EfficientNet-B3 yields the most effective representation. The resulting 1536-dimensional embeddings are then used to train downstream classifiers, including SVM, KNN, logistic regression, random forest, XGBoost, and ANN, using stratified 10-fold cross-validation. The hybrid EfficientNet-B3--SVM configuration achieves the strongest baseline performance, reaching 96.31% accuracy and a macro-F1 score of 96.36%, outperforming the standalone CNN baseline. To address limited-data conditions, a generative model, a DDPM-based feature augmentation, is introduced in a PCA-reduced EfficientNet-B3 latent space. The low-data ablation results show that DDPM augmentation provides selective benefits, particularly for KNN with reduced training fractions, and that its effect remains classifier-dependent. Finally, an application-level Raman Pharmaceutical Analyzer demonstrates the feasibility of embedding the trained model into an interactive Raman analysis workflow. These results suggest that HyMLRaman provides a practical and interpretable route for rapid Raman-based pharmaceutical screening.

0.19

A Proof-of-Concept Study of Wi-Fi Channel State Information-Based Fall Detection Using ESP32 Devices

eess.SP ·2026-11-11 ·Amritha S. S., Anhajul S. Rahman, Mohammed Bin Saleem, Vaishnav Sankar, Jerrin Thomas Panachakel
similarity 0.39
Abstract

This paper reports a small-scale proof-of-concept study of contactless fall detection using Wi-Fi channel state information (CSI) collected with two ESP32 devices. One device acts as the transmitter and the other as the receiver, with a separation of 3.5~m. The evaluated signal-processing pipeline uses CSI amplitude, second-level discrete wavelet transform (DWT) denoising with a Symlet-10 wavelet, z-score normalization, and fixed-length segmentation. Wavelet-scattering coefficients are used as features, and MATLAB's automated classifier-selection workflow identifies a LogitBoost ensemble with a minimum leaf size of four and a learning rate of 0.022052. The proposed classifier achieved an accuracy of 93.10%, with a precision of 100%, recall of 87.50%, and F1-score of 93.33%. These results demonstrate the potential of Wi-Fi CSI-based sensing for contactless fall detection using low-cost ESP32 hardware.

0.28