CS Paper Radar

AI-Driven Repair of Missing Automotive Components

Kazim Abbas, Zheng Liu

cs.CV ·submitted 2026-11-06 23:34 UTC · v1

Abstract

Due to supply constraints, replacing damaged automotive components can be expensive and time-consuming, while replacing the entire component can be wasteful when much of it remains usable. This paper presents a pipeline to investigate whether missing geometry can be reconstructed as a repair patch using paired observations of the intact models and synthetically damaged components. Noise-free color, depth, and silhouette images were produced using the camera viewpoints. Depth differences were then used to identify the potential missing regions, while multi-view voxel reconstruction was used to estimate the missing portion. A pretrained DINOv2 model was also added to validate missing candidates and determine whether pretrained visual features could improve reconstruction. We tested the pipeline on 20 automotive CAD models, each with a synthetically removed portion. Each model was tested under four different conditions using two reconstruction methods for a total of 160 trials. The predictions were compared with the missing geometry of the unchanged ground-truth using predefined thresholds of the voxel intersection-over-union over 0.85 and the absolute relative volume error less than 15%. Of the 160 experimental trials, 109 of them satisfied both thresholds. Geometry-only reconstruction passed 16 of 20 components with eight views but only 10 of 20 with four adjacent views. Further analysis showed that 24 out of the 37 failed reconstructions could be categorized as unsuccessful because extra material was incorrectly added to areas that should have been empty. The implementation of DINOv2 into the pipeline did not improve the overall reconstruction accuracy and made prediction generation slower. For 13 verified tests, printing only the repaired sections instead of the entire parts reduced filament use by 93.08% and printing time by 89.39% based on the median results.

Comment
6 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

CADFather: Autonomous CAD Reconstruction through Coordinated Tool Use

cs.AI cs.LG ·2026-10-06 ·Gennadiy Savrasov, Maksim Elistratov, Nikita Gavrilov, Albert Garifullin, Oleg Pavlov +5 more
similarity 0.63
Abstract · 17 pages, 7 figures, 6 tables

Reconstructing an editable CAD model from a 3D shape remains a challenging engineering task. Existing methods can propose CAD operations, but no single source of proposals works equally well across different part geometries and stages of reconstruction. We introduce CADFather, an autonomous agentic system that coordinates complementary tools to recover parametric CAD programs from 3D meshes. A vision-language assistant inspects renders of the target and intermediate reconstructions, then decides which candidate CAD programs to extend, which tools to invoke, how many proposals to generate, and when to finish. Learned and algorithmic tools propose CAD operations, while numerical optimization refines the parameters of existing programs. Proposed or refined programs are executed and evaluated to provide feedback for subsequent decisions. The agent maintains alternative candidate programs for each target part and preserves the best valid result throughout reconstruction. CADFather uses pretrained generation and assistant models without additional training. We evaluate reconstruction quality and execution validity on the full DeepCAD, Fusion360, and MCB test sets, as well as on CADENA-Bench, CADBench, and BenchCAD. We additionally analyze computational cost and the trade-off between cost and reconstruction quality.

0.42

CADForge: Agentic Single-View CAD Reconstruction with Explicit Geometry Reasoning

cs.AI ·2026-10-03 ·Keyang Lu, Zhifei Yang, Tianao Dong, Mingzhe Xing, Zhen Xiao +1 more
similarity 0.61
Abstract

Reconstructing editable parametric CAD models from a single-view image is of great practical value for modern manufacturing, yet remains challenging due to incomplete geometric observations and complex inter-part relationships. To address it, we propose CADForge, an agentic framework that progressively converts a single image into CadQuery programs. CADForge decomposes an object into CAD-meaningful components and performs explicit geometric reasoning for each component, a process that first identifies CAD-relevant constraints and then translates them into precise modeling parameters through mathematical code. The inferred parameters then drive component-wise synthesis of executable CadQuery programs, with a review agent evaluating the resulting geometry and providing targeted feedback for iterative refinement. To further improve robustness and efficiency, CADForge incorporates a failure-guided toolkit construction mechanism to distill accumulated experience into tools, and maintains a compact parametric CAD memory for retrieving modeling context on demand. Experiments on diverse single- and multi-part objects show that CADForge consistently outperforms existing baselines in reconstruction fidelity and perceptual quality, demonstrating an effective approach to accurate single-view CAD reconstruction.

0.33

SceneAnything: Agentic Reconstruction of Large-Scale Mesh Scenes from a Single Video

cs.CV cs.GR ·2026-11-19 ·Bowen Xue, Saeed Hadadan, Fabrice Rousselle, Zahra Montazeri, Ravi Ramamoorthi +1 more
similarity 0.60
Abstract

Reconstructing an editable 3D scene from video requires matching visible structure while plausibly completing unseen surfaces. Agents can write scene-construction programs, but direct reconstruction attempts often produce errors in layout, scale, and lighting. We introduce SceneAnything, an automated system for reconstructing mesh scenes from real and generated videos, enabling text-to-scene construction when paired with video generation. A software harness coordinates agents, pretrained vision models, and graphics tools through an explicit reconstruction protocol. Shared camera, depth, and segmentation estimates ground component construction: a scene-owner agent plans the environment and briefs authors, who write parameterized Blender programs. A visibility- and fit-based level-of-detail rule selects the construction level, while unseen regions are completed and marked as inferred. Assembled scenes use fitted lighting and supported motion, and revisions undergo programmatic checks and independent visual comparisons. Accepted programs and lessons are reused across scenes. We evaluate on 100 scenes; subset comparisons show improved original-view fidelity over direct-agent reconstruction and higher novel-view content similarity than the compared video-to-3D methods. We will release the harness, agent instructions, reusable libraries, and scenes.

0.19

CODA: Depth-Aligned Scene Completion and Object Decomposition from a Single RGB-D Image

cs.RO cs.CVcs.LG ·2026-09-22 ·Dongwon Son, Junhyek Han, Yoontae Cho, Minseok Lee, Hong-seok Choi +3 more
code/data similarity 0.60
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://dongwon-son.github.io/coda-project-page/

Robots operating safely in cluttered everyday environments often need to infer scene geometry from partial observations. Methods that detect objects in 2D and reconstruct them independently struggle in such scenes: a missed object is never reconstructed, a merged detection can fuse two objects, and separately reconstructed meshes may overlap or fail to touch their supporting surfaces. We introduce CODA (Complete Once, Decompose Afterward), a generative model that instead reconstructs the complete scene geometry from a single unsegmented RGB-D image, then separates the surface into the surrounding environment and movable objects. Still, generated scene geometry can drift from the observed partial point cloud. To reduce this drift, CODA uses two explicit 3D grounding mechanisms to keep reconstructed geometry consistent with observed surfaces while completing unseen regions. Experiments on HomebrewedDB and our custom cluttered-scene dataset show more accurate reconstructions and a higher fraction of objects remaining in place under simulated gravity than both object-first and scene-first baselines.

0.27

3D-VITAL: Visibility-aware Identity Training from Artificial Liftings of 3D Reconstruction model for Cross-View Object Re-Identification

cs.CV ·2026-10-12 ·William Grolleau, Astrid Sabourin, Guillaume Lapouge, Catherine Achard
publishedcode/data similarity 0.59
Abstract · Accepted to NeurIPS 2026 (poster)

We address the Cross-View Object Re-Identification (ReID) task, aiming to match identities across drastically different viewpoints. We focus on Single-View Aerial-Ground ReID (SV AG-ReID), where models train on one viewpoint and must generalize to another at inference. To bridge this viewpoint gap, related work employs generative models to synthesize novel views from source images as additional training data. We leverage recent advances in large-scale single-view 3D mesh reconstruction to lift source images into textured meshes and to render them from new viewpoints. However, this pipeline produces unreliable data in two distinct ways. First, the reconstruction may fail and produce geometrically incorrect meshes, resulting in severe corruption in rendered novel views. Second, even when the geometry is correct, the rendered novel views contain hallucinated textures in regions not visible in the source image. The reconstructed mesh carries a per-pixel partition between regions visible from the source view and regions that the reconstruction model had to hallucinate, available as a deterministic byproduct of rendering. We introduce this per-pixel visibility map and exploit it in a two-stage design. Cross-View Consistency Filtering (CVCF) discards geometrically incorrect meshes by ensuring multi-view consistency between source and novel views over visible patches. Visibility-Aware Attention Supervision (VAAS) leverages the visibility map to guide the model's attention toward reliable regions of the rendered view during training. Combined, these two components enable our method, 3D-VITAL, to better leverage the synthetic signal from single-view 3D mesh reconstruction. 3D-VITAL sets a new state-of-the-art on three SV AG-ReID benchmarks. Code and data will be released at https://github.com/TurtleSmoke/3D-VITAL.

0.37

Look Where You Can: Active View Selection for CAD Reconstruction under Occlusion

cs.CV ·2026-10-08 ·Kartik Bali, Mahish Guru, Yiderigun Borjigin, Alexandra Starostina, Christian J. Cyron +1 more
benchmark similarity 0.59
Abstract

CAD reconstruction methods assume a luxury reality rarely grants: unrestricted visual access to the object, photographed from any desired angle. Real objects, however, are scene-embedded, bolted against walls, wedged into corners, resting on floors, where the scene renders much of the view sphere unreachable and the remaining views unequally informative. We introduce \textbf{SightCAD}, a framework for parametric CAD reconstruction that treats view feasibility as a first-class constraint. In this work we consider objects from standard CAD benchmarks embedded in realistic indoor scenes with physically derived visibility constraints over a discrete view sphere. A learned view selector must choose $K$ feasible views for a vision--language model (VLM) that generates executable CadQuery code, scored by geometric fidelity of the executed solid. Because reward arrives only after discrete view selection, autoregressive generation, and CAD-kernel execution, we propose a joint training paradigm in which the view selector and the CAD-generation VLM are trained together against this reward. The learned selection policy departs sharply from random, uniform, and coverage-greedy alternatives, outperforming surface-area maximization (SA-max) by up to $6.4$ Intersection-over-Union (IoU) points across budgets $K\in\{1,\dots,5\}$. The full system surpasses strong external baselines on scene-embedded, occluded multi-view renders of DeepCAD and Fusion360 objects ($+21$ and $+17$ effective-mIoU points over the best baseline, respectively), as well as on test-time domain-canonicalized real images from the industrial T-LESS benchmark and on both synthetic and real images from the MP6D industrial metal-parts benchmark, while producing the highest rate of executable programs of any method compared (invalid-code rate ${\leq}1.5\%$).

0.39

Quo Vadis, Driving Scene Reconstruction? Occlusion-Aware Gaussian Densification

cs.CV cs.AI ·2026-11-04 ·Dung Do Tien, Kien Nguyen Do Trung, Kiet Dang Vu, Trung Thai Tran, Duc Dung Nguyen
publishedbenchmark similarity 0.59
Abstract · Accepted at the Workshop on Computer Vision for Developing Countries (CV4DC), ACCV 2026 (Proceedings Track)

While recent feed-forward 3D Gaussian Splatting methods enable efficient driving-scene reconstruction from surround-view images, their reliance on a single observation fundamentally hinders novel-view synthesis. Regions occluded in the input can become visible from novel viewpoints, leaving the reconstructed Gaussians under-constrained and incomplete. Moving beyond image-space inpainting for rendered views, we introduce OccSplat, a feed-forward framework whose core contribution is Occlusion-Aware Gaussian Densification, explicitly targeting missing scene geometry rather than missing pixels. By predicting new Gaussian primitives for unsupported regions, OccSplat completes the scene directly in the 3D representation. Specifically, OccSplat first identifies occluded regions that lack Gaussian support through Gaussian Occlusion Mapping. Gaussian Occlusion Completion then generates new primitives for these regions. The predicted primitives are integrated into the original representation to improve novel-view synthesis while retaining feed-forward inference without per-scene optimization. Experiments on the nuScenes benchmark demonstrate that OccSplat improves on the compared methods and yields particularly large gains in occluded regions, leading to more accurate and visually coherent driving-scene reconstruction.

0.19

VGGT-CAD: Reconstructing Parametric CAD 3D Model with Geometric Grounding

cs.CV ·2026-09-18 ·Chunan Yu, Tianrun Chen, Fu Shen, Cheng Chen, Lanyun Zhu +1 more
benchmark similarity 0.58
Abstract

Parametric CAD reconstruction requires recovering both precise geometry and editable modeling operations from visual observations, making it challenging under limited and ambiguous views. Existing methods mainly rely on 2D appearance cues and lack strong multi-view geometric priors. In this work, we present VGGT-CAD, a geometry-aware framework for parametric CAD reconstruction from single- and multi-view observations. We transfer pretrained 3D geometric priors into CAD reconstruction by encoding camera parameters as condition tokens and jointly modeling them with image tokens. To handle varying numbers of viewpoints, we introduce a variable-view cross-view context aggregation module that adaptively fuses multi-view features. We further develop a training-free geometry-aware view selection strategy to select complementary and reliable frames during inference. The resulting representation is decoded into CAD command sequences using a non-autoregressive decoder. We also develop VideoCAD, a large-scale multi-view video benchmark derived from existing CAD data through multi-view re-rendering. Extensive experiments demonstrate the effectiveness of VGGT-CAD for visual CAD reconstruction under different observation configurations.

0.21