CS Paper Radar

Agentic discrete-event simulation for manufacturing system design: an open 3D simulator, a benchmark and an industrial case

Javier Pernas-Álvarez, Diego Crespo-Pereira

cs.AI ·submitted 2026-11-07 09:12 UTC · v2
benchmarkcode/data

Abstract

The design of manufacturing systems relies on discrete-event simulation (DES) models that experts still build in tool-specific interfaces. AI agents can now write simulation code, but every model they write from scratch is new, unverified software. We present SimuLean, an open-source 3D DES simulator on the Unity engine designed to be programmed by AI agents: its modelling semantics are verified once, in the platform, and the agent builds and studies one model through domain-level commands, in the 3D scene or headless; physically simulated durations are calibrated for fast headless studies. We evaluated it on 18 manufacturing modelling tasks, from single machines to published production lines. A frontier agent built valid models in 93 of 108 attempts (86%), in about two minutes each; on the benchmark's interface version, two frontier agents built 105 of 108 models through domain commands alone, so that each comes with a record of how it was built. Every residual failure was silent - a model that builds and runs but answers wrongly - and only comparison with reference models revealed them all. In an industrial case, one agent working alone rebuilt, verified and studied a robotised welding workshop from a published study, in SimuLean and in SimPy. Comparing them with the published, expert-built model exposed an error in it; against the corrected model, the agent-built models agree within 1%. One agent can already build complete, realistic and traceable models for the design of manufacturing systems; independent reference models are what make them trustworthy.

Comment
55 pages, 15 figures, 8 tables. Software: https://github.com/simulean/SimuLean (doi:10.5281/zenodo.23565564)

Closest papers

Nearest neighbours by meaning across the whole index.

WorldSolver: Can LLM Agents Simulate the Physical Dynamics via Solver Generation?

cs.AI ·2026-10-06 ·Siru Jiang, Yongzhe Lyu, Shuo Lu, Yubin Wang, Yuxiang Zhang +4 more
benchmarkcode/data similarity 0.64
Abstract

LLM-based agents are increasingly advancing scientific and engineering problem solving, with physics simulation emerging as a challenging yet practical testbed for reproducing complex physical phenomena with application in embodied AI, games and films. As the workhorse of such simulation, a solver computes how the state of a dynamic system evolves over time. Building such solvers requires physical understanding to identify appropriate models, mathematical reasoning to formulate the underlying dynamics, and software engineering to implement them as executable code, yet this capability of LLM agents remains underexplored. To this end, we introduce WorldSolver, a benchmark of 168 simulation tasks derived from physical phenomena in 61 classic computer graphics papers, spanning 7 physical domains. Each task contains a code scaffold that provides a fixed simulation environment for the scene, with the solver implementation left for the agent to complete. Specifically, we evaluate them along three dimensions: Execution Checks for successful execution, Visual Fidelity for reproducing the intended dynamic behavior in the rendered simulation, and Physical Plausibility for physics-grounded verification of the generated dynamics. Experiments on frontier agents reveal that producing executable solvers is difficult itself, and satisfying visual and physical correctness is even harder. GPT-5.6-Sol and Claude-Opus-5 perform comparatively better than the other evaluated agents, yet achieve overall scores of only 48.7% and 46.7%, respectively. WorldSolver is an early step toward agentic solver generation, and we hope it helps drive progress toward agents that can faithfully simulate the dynamic physical world. Code is available at https://github.com/sirujiang/WorldSolver.

0.27

CADWorld: Computer-Use Benchmark for Long-Horizon Computer-Aided Design

cs.AI ·2026-09-14 ·Zihan Dong, Yuanzhe Liu, Zhiyuan Ma, Qishi Zhan, Dehan Kong +2 more
benchmark similarity 0.63
Abstract

Computer-use agents are increasingly evaluated in realistic desktop environments, but existing benchmarks provide limited coverage of professional engineering workflows whose outputs are persistent, structured artifacts. Mechanical computer-aided design (CAD) is a particularly demanding setting: an agent must manipulate geometry and constraints over long interaction horizons while producing a native project whose dimensions, construction structure, and downstream engineering state remain valid. We introduce \textbf{CADWorld}, a benchmark for long-horizon computer use in FreeCAD. CADWorld contains 200 tasks spanning 11 mechanical-CAD workflow categories, including sketching, part modeling, assembly, CAM, FEM, measurement, mesh processing, and technical drawing. Agents operate through screenshots and GUI actions, while success is determined by task-specific executable checks over saved FreeCAD artifacts and auxiliary outputs, covering geometric properties, parametric structure, constraints, manufacturing state, and simulation results. Across seven current agents on the full benchmark, the strongest agent achieves 17.5\% success, compared with an 87.0\% expert reference pass. We find that weaker agents often fail before producing a valid artifact, whereas stronger agents increasingly fail on structural, geometric, and construction-process requirements. CADWorld therefore exposes a gap between general GUI competence and reliable execution of persistent, verifiable engineering workflows. Project accessible at https://cad-world.github.io.

0.46

Agentic AI-enabled Semantic Commissioning of a Cognitive Digital Twin for Reconfigurable Manufacturing

cs.RO cs.MA ·2026-09-08 ·Yangyang Liu, Xun Xu, Jan Polzer
published similarity 0.62
Abstract

Rapid bespoke commissioning of the Cognitive Digital Twin (CDT) is a major challenge in reconfigurable manufacturing. Traditional digital twin (DT) construction methods primarily focus on geometric reconstruction, often neglecting the deep semantic integration and functional interoperability necessary for autonomous reasoning. This paper proposes an agent-based, AI-driven workflow to automate end-to-end CDT debugging. The system utilises LangGraph as a multi-agent orchestration engine to achieve dual-path synthesis: the semantic path extracts technical specifications from unstructured documents using Retrieval Augmented Generation (RAG), while the functional path autonomously discovers and binds to real-time industrial telemetry data using Model Context Protocol (MCP). Experimental validation in a robotic machining cell demonstrates that the system achieves a mean average accuracy (mAP) of 97.2% in perception and reduces the deployment cycle from several weeks to an average of 2 hours, marking a paradigm shift from manual scripting to autonomous orchestration.

0.27

SimEX: Simulation-Integrated Robotics AutoResearch

cs.RO cs.AIcs.LG ·2026-09-30 ·Jiaheng Hu, Roberto Martin-Martin, Peter Stone, Rocky Duan, Zhenyu Jiang +1 more
highly cited similarity 0.62
Abstract

Coding agents powered by large language models (LLMs) have shown remarkable abilities to autonomously reason about and achieve goals in the digital world. However, bringing this success to the physical world remains challenging. On the one hand, direct generation methods (e.g., Code as Policies) often suffer from the LLMs' insufficient understanding of robots and physical environments. On the other hand, iterative trial-and-error tuning in the physical world (e.g., physical autoresearch) induces significant experimental cost and safety concerns. We introduce SimEX: Simulation-Integrated Robotics AutoResearch, an autoresearch framework that tightly integrates simulated experimentation, enabling coding agents to efficiently acquire physical capabilities for controlling real robots. SimEX operates in two stages. First, the agent conducts open-ended probe-and-optimize iterations in simulation, developing a robot toolbox with robust and generalizable capabilities. Second, the agent adapts the toolbox and the simulator together through only a few physical trials: each trial corrects the simulator, and the corrected simulator is used to diagnose failures and screen candidate repairs. We evaluate SimEX extensively in sim-to-sim settings and on physical robots. On challenging real-world manipulation tasks including towel folding, barcode scanning, and plate manipulation, SimEX enables coding agents to efficiently acquire robot skills without any demonstration and with only 10 minutes of real-robot interaction. These results suggest that simulation can be a critical component in achieving physical intelligence, not only as a source of training data that must closely replicate the real world, but also as a roughly correct laboratory where a coding agent develops the knowledge and procedures needed to act on the robot. More details and robot videos at https://robo-simex.github.io/

0.59

Assessing the CAD Capabilities of General-Purpose AI Models: A Case Study of GPT-6 Astra

cs.GR ·2026-10-17 ·Qiang Zou, Jiajun Shen, Zhijie Yang, Yuhao Wang, Shitianyi Leng +1 more
code/data similarity 0.62
Abstract · The paper contains 13 pages of contents that summarize the 181 page long full report of CAD Capabilities of General-Purpose AI Models. The p…

Recent advances in general-purpose AI models and agentic systems have enabled them to perform some CAD tasks. A systematic assessment is now needed to establish what these systems can accomplish and how well their outputs meet engineering requirements. This paper presents an empirical study of GPT-6 Astra, a SOTA general-purpose AI model, across four basic CAD tasks: model understanding, generation, editing, and evaluation. We design test cases spanning different levels of complexity and engineering requirements. The results show that GPT-6 Astra can support multiple stages of CAD workflows, with successful outcomes in cases involving nontrivial geometric complexity. This suggests that general-purpose AI is beginning to offer practical value in almost all steps in CAD workflow. However, gaps remain between generating visually plausible geometry and producing valid, functional, and editable CAD models. Recurring errors in freeform geometry, parameter dependencies, and mating relationships between parts limit engineering usefulness. Agentic iterative refinement can improve results but does not consistently resolve critical errors; long completion times further constrain practical use.

0.28

SimuVerity: Benchmarking Agents for Engineering-Grade Simulink Model Generation

cs.SE cs.AIcs.LG ·2026-10-01 ·Ruiqi Zhang, Jiahao Wang, Mingxuan Li, Haichen Luo, Chaoting Wang +7 more
benchmarkcode/data similarity 0.61
Abstract · 26 pages, 12 figures. Code and data are available at https://github.com/SimuVerity/SimuVerity

Existing Simulink benchmarks mainly evaluate whether generated models compile, execute, or resemble a reference model. These criteria do not establish whether a model satisfies its engineering requirements. We introduce SimuVerity, a benchmark of 101 text-to-executable Simulink model-generation tasks across ten engineering domains. For each task, executable-system profiles ground the engineering specification and four families of native simulation scenarios. A hierarchical evaluator first checks artifact delivery, native executability, and engineering qualification, then scores qualified models across six dimensions covering accuracy, output quality, mechanistic fidelity, control and causal integrity, operating-domain robustness, and dynamic response. We evaluate six agent systems with SimuVerity. The best system achieves an overall score of only 42.86. The results show that structural similarity is a poor proxy for engineering performance: capability bottlenecks arise both in producing qualified implementations and in satisfying multidimensional requirements after qualification. Meanwhile, some high-scoring models still exhibit severe visual-layout disorder. SimuVerity provides a systematic basis for assessing agents' engineering capabilities and diagnosing failures in executable Simulink model generation.

0.67

Beyond Executable Models: The Pufibara Agent Harness and the Modelica Agent Workflow Benchmark for Physical System Modeling

cs.SE cs.AI ·2026-08-24 ·Zizhe Wang
benchmark similarity 0.61
Abstract

AI agents are increasingly used for simulation-driven engineering. Physical system modeling presents different requirements from general-purpose code generation in software engineering, because correctness depends not only on syntax and executability but also on physical consistency and scenario-dependent behavior. We study this challenge in Modelica, an equation-based modeling language in which a model may compile and simulate while still violating its intended physics or engineering requirements. Across successive revisions, an agent may lose track of requirements or rely on simulation evidence produced by an outdated candidate. To address this challenge, we present Pufibara, an agent harness that maintains persistent engineering state across revisions, associates execution and simulation evidence with the candidate that produced it, and makes submission an explicit agent action. To evaluate end-to-end Modelica agent workflows, we also propose a source-grounded method for constructing realistic and independently evaluable tasks. We use this method to build the 232-task Modelica Agent Workflow Benchmark, spanning Model Repair, Model Generation, and Model Tuning. Each submitted candidate is scored by a benchmark-owned evaluator outside the agent loop. We compare Pufibara with Claude Code as complete harnesses under two matched large language model (LLM) backends. With DeepSeek v4 Flash, Pufibara passes 202 tasks, compared with 185 for Claude Code. With Claude Sonnet 5, Pufibara passes 202 tasks, compared with 187 for Claude Code. Under the repository-reported token accounting, Pufibara records 76.4%-82.5% lower logical-token totals. Its sequential runtime is 6.1%-58.4% lower. These findings show that, even under matched LLM backends, complete agent harnesses can differ substantially in both task success and resource use for physical system modeling.

0.16

AgenticCADedit: A Stateful, Tool-Mediated Agentic Approach to Multimodal 3D CAD Editing

cs.CV cs.GR ·2026-08-28 ·Saptarshi Neil Sinha, Mika Silvan Goschke, Paul Julius Kühn, Arjan Kuijper, Michael Weinmann
similarity 0.61
Abstract

Computer-aided design is central to industrial manufacturing, and much of a designer's daily work consists of editing existing models from multimodal requests involving speech, sketches, and model interaction. Existing neural CAD approaches focus predominantly on unconditional or text-conditioned generation. The neuralCAD-Edit approach formalizes expert multimodal editing requests, but its iterative baseline refines a complete CAD program across attempts, executing each attempt from the original model in a stateless CAD environment. Every attempt must therefore reconstruct the entire edit from scratch, so partially correct progress is discarded rather than accumulated, and the model can neither inspect the geometry it has just produced nor selectively revert a single faulty operation. We present AgenticCADedit, which turns editing into a sequence of small, verifiable actions on a persistent CAD state instead of a single regenerated program. Rather than emitting one complete program, it applies incremental code steps that each commit to the session, inspects the resulting faces and edges, renders highlighted selections to verify that the intended region was addressed, and reverts individual operations when it was not. Subsequent actions therefore build on the geometry produced by earlier ones. Our approach improves on all metrics for all three evaluated LLMs (open-weight: qwen3.6-27b, gemma4-31b; proprietary: gpt-5.6-luna), with the largest gains for the weakest baseline model, qwen3.6-27b, whose validity rises from 51.0% to 94.8% and acceptance from 1.6% to 12.0%. A token-cost analysis with gpt-5.6-luna further shows $66.7$% fewer output tokens than neuralCAD-Edit, while $94.8$% of input tokens are served from the prompt cache.

0.16