CS Paper Radar

PENSA: A Spatial Accelerator for BitNet b1.58 Inference on an HBM-equipped AMD Alveo FPGA

Karthikeyan B. Kalyanasundaram, Ivan S. Maksymov, Philip H. W. Leong

cs.AR eess.SP ·submitted 2026-11-07 10:45 UTC · v2

Abstract

Ternary large language models (tLLMs) replace general multiplication in dominant linear layers with sign-controlled accumulation, shifting hardware bottlenecks toward packed-weight delivery, reduction, and operator occupancy. PENSA is an end-to-end FPGA accelerator for the BitNet b1.58 2B4T model on an AMD Alveo U50. Two row-partitioned ternary matrix engines consume packed TQ1_0 weights from eight independent high-bandwidth memory (HBM) pseudo-channels, each processing 1,280 ternary weights per cycle through sign selection and integer reduction. The sequencer, attention, and vocabulary-projection units remain resident on the FPGA, while two-stream interleaved scheduling overlaps sequences across the persistent pipeline to form the Penta-Unit. At 104.1~MHz, PENSA achieves 58.09 tok/s at context 128 and 24.60 tok/s at context 2048, corresponding to 2.14-3.14$\times$ the throughput of a same-model Xeon E-2356G baseline. The resulting system demonstrates end-to-end FPGA execution of 2B-scale BitNet topology without modifying its model structure.

Closest papers

Nearest neighbours by meaning across the whole index.

Implementation and Evaluation of BitNet Inference on a CGLA by Signed-Int4 Instructions

cs.AR ·2026-09-23 ·Takuto Ando, Yasuhiko Nakashima
similarity 0.70
Abstract · Accepted as a Regular Paper for the CSA Workshop at CANDAR 2026

Large language model (LLM) inference transfers model weights and activations for every generated token, making memory traffic and its energy cost part of the decode path. BitNet b1.58 represents its low-bit weights by ternary values and uses integer activations. However, this arithmetic does not match conventional int8 or floating-point general matrix multiplication, and existing BitNet accelerators implement it in specialized datapaths. We instead map this operation to a CPU-Grounded Linear Array (CGLA), a programmable ASIC with explicit direct memory access, local memories, and reusable compiler-visible integer lanes. The mapping adds OP_SMA4 as a reusable signed-int4 multiply-accumulate instruction rather than a BitNet-only datapath. Each ternary weight occupies one signed 4-bit lane. Each int8 activation is split into two signed-int4 fragments and reconstructed by shift-and-add. Frequency scaling of the 145 MHz FPGA measurement to an 840 MHz 28 nm CGLA achieved 0.390 ns per signed-int4 product. We showed that CGLA-offloaded BitNet C++ execution measures 2.52 tokens/s.

0.35

The State Is Not the Bottleneck: A Paged-State Gated-DeltaNet Tile on a Tri-Mode Multicast Mesh, Bit-Exact from RTL to Silicon

cs.RO cs.ARcs.LG ·2026-11-13 ·Cong Xu, Ravi Sankar
similarity 0.68
Abstract · 12 pages, 5 figures, 6 tables. The technical supplement is included as an ancillary file. This work has been submitted to the IEEE for possi…

Linear-attention language models replace a growing key-value cache with a recurrent state of fixed size. On an edge FPGA, this state can exceed the on-chip memory and must be paged to external memory. This paper asks whether such paging dominates the cost of decoding (generating tokens). We built a hardware tile that computes one complete layer of a custom 369-million-parameter hybrid Gated DeltaNet model on an Agilex 5 FPGA and pages its recurrent state. The model state needs 6.2 MiB, whereas the device has 0.87 MiB of block memory. Paging adds 26.0 MB of memory traffic per decoded token, at most 11.2 percent of the calculated total. On the board at 75 MHz, with synthetic weights, one token takes 11.15 ms in this layer. The matrix-vector products with the weights take about 62 percent of this time and the state phase, including the paging, 13 percent. The tile is one node of a multicast mesh of tri-mode processing elements. We measure the error of the fixed-point arithmetic against floating point and check that the hardware agrees bit for bit with a fixed-point reference. In simulation, the state logic agrees with the reference on all 18 recurrent layers. On the board, six builds pass all 30 runs of 64 tokens and two runs of 1,024 tokens. For this model and memory interface, the delivery of the weights limits the decoding performance, and the recurrent state does not. State paging is therefore practical for such a model on an edge FPGA.

0.19

SPARTA: A Sparse Ternary LLM Accelerator with Adaptive Attention and Unified Datapath for Long-Context Edge Inference

cs.AR cs.AI ·2026-10-26 ·Yanzhen Zhou, Zhengyu Han, Qunyou Liu, Zheyu Yan, Weihong Xu +1 more
top venue similarity 0.66
Abstract

LLMs on edge devices are constrained by limited memory and bandwidth. Although 1.58-bit ternary weights greatly reduce model storage, long-context inference is increasingly bottlenecked by KV-cache traffic and attention. Existing accelerators also use separate datapaths for ternary linear layers and attention, incurring hardware and execution overhead. We present SPARTA, a sparse ternary LLM accelerator for efficient long-context edge inference. SPARTA integrates: (1) a phase-aware sparse dataflow exploiting heterogeneous sparsity across compute-bound prefill and memory-bound decode; (2) a unified compute fabric mapping ternary SpMM/SpMV and bit-serial attention onto shared processing elements to exploit zero-weight and zero-bit sparsity; and (3) an adaptive two-stage attention engine combining page-level Top-k selection to reduce K-cache accesses with token-level Top-p pruning to reduce V-cache traffic. SPARTA reduces KV traffic by 4.1-4.8x over full attention and 1.3-1.5x over a state-of-the-art sparse-attention scheme, with task-dependent quality loss. Compared with NVIDIA Jetson AGX Orin, SPARTA achieves 3.9x higher generation throughput and 8.3x higher end-to-end energy efficiency on average; versus AMD Ryzen 7 9700X, the gains are 5.0x and 81.7x. It also delivers 1.6-12.0x higher throughput, 2.0-4.2x higher energy efficiency, and 1.3-51.4x higher area efficiency than FIGLUT, TeLLMe, and MCBP.

0.45

FOSCAR: Accelerating Decode Attention over 2- and 4-Bit KV Caches through Affine Folding

cs.AI ·2026-11-06 ·Donglin Zhuang, Pragaash Ponnusamy, Xiaoxia Wu, Shuaiwen Leon Song, Zhongzhu Zhou
benchmarkcode/datahot direction similarity 0.65
Abstract

Large-language-model decode attention streams the key-value (KV) cache for every generated token. Packing that cache into 2-bit or 4-bit quantized integers reduces memory traffic but does not automatically translate into latency saving. Existing 2-bit fused kernels reach under 31%/15% of peak HBM throughput on H100/B200. Converting each value and applying its scale and offset before feeding Tensor Cores is a major bottleneck because instruction-issue throughput is scarce on modern GPUs. Instead of applying scale and offset to each KV value, FOSCAR uses affine folding to apply them to the other operand or the output of decode-attention matrix products, depending on the quantization scheme (token-wise or channel-wise). This reduces scale-and-offset operations by up to two orders of magnitude while preserving the dequantized attention output in exact arithmetic. FOSCAR also uses bit manipulation to feed KV operands to Tensor Cores efficiently, requiring only 1 and 0.19 ALU instructions per INT2 element on H100 and B200, respectively. Finally, FOSCAR builds warp-specialized GPU pipelines for Hopper (H100) and Blackwell (B200) using wgmma and tcgen05. On H100, FOSCAR INT2 and INT4 kernels achieve geo-mean speedups of $3.36\times$ and $2.83\times$ over FlashInfer BF16, and $2.03\times$ and $1.71\times$ over TensorRT-LLM FP8. On B200, the corresponding INT2 and INT4 speedups are $2.67\times$ and $2.30\times$ over FlashInfer BF16, $1.48\times$ and $1.28\times$ over TensorRT-LLM FP8, and $1.16\times$ and $1.00\times$ over TensorRT-LLM NVFP4. We integrate FOSCAR into SGLang to benchmark serving efficiency. On long-context serving workloads, FOSCAR increases peak aggregate throughput by up to 170% and 341% over 2-bit and 16-bit baselines, respectively. We open-source FOSCAR as a kernel library at https://github.com/FutureMLS-Lab/FOSCAR.

0.38

Hardware Acceleration of Block-Diffusion LLM for Edge Devices

cs.AR ·2026-09-01 ·Wei-Hsing Huang, Kiseok Lee, Ming-Yen Lee, Weiyu Sun, Cheng-Jhih Shih +5 more
benchmark similarity 0.65
Abstract

Single-stream (batch-one) edge inference cannot amortize weight traffic across requests. Full-attention diffusion LLMs recompute the entire sequence at every step; native block diffusion makes completed blocks immutable and exactly cacheable, yet refinement still streams prefix KV and FFN weights. We co-design WIFiV-LPDDR, a wide-I/O LPDDR system for precision-tagged reads, BRQ-KV for a canonical low-rank-plus-INT8-residual prefix with query-dependent per-entry precision, and DAT-FFN for drift-mapped canonical replacement, adjacent-stage-corrected low-bit delta, or cached-state carry while keeping live activations unquantized. Both map to an input-stationary mixed-precision systolic array. For the evaluated 1.5B/7B models on modeled Jetson-class platforms, the full stack provides arithmetic-mean energy-reduction factors of 3.79x/3.96x and arithmetic-mean latency speedups of 2.88x/4.44x at the reported DAT-FFN settings; every corresponding compressed model-benchmark score drops by less than one absolute percentage point from its baseline.

0.12

Systolic Linear Attention: Co-Designing Tile-Grouped Gated Delta Attention for TPUs

cs.LG ·2026-11-04 ·Gagik Amirkhanyan, Nuojin Cheng
code/data similarity 0.65
Abstract

Gated-delta linear attention layers such as Gated DeltaNet (GDN), Kimi Delta Attention (KDA), and GDN-2 are tuned for GPUs, where small tensor-core tiles and fast vector registers make per-channel decay rescaling and sequential in-block solves cheap. On Google TPUs, which concentrate compute in wide $256 \times 256$ systolic matrix units backed by a slower vector unit, porting these layers directly leaves half of each matrix tile empty and bottlenecks on vector operations. We present \textbf{Systolic Linear Attention (SLA)}, which reshapes gated delta attention around the matrix unit by widening keys to $256$ with grouped value heads, grouping decay gates into four $64$-channel tiles, and computing the chunk solve entirely with block matrix products in a single fused kernel. On TPU v7x, a full \texttt{SLA-R4} layer runs $1.6\times$--$2.5\times$ faster than the open-source Tokamax KDA kernel ($1.4\times$--$2.4\times$ with exact chunk inversion), driven primarily by head sharing and kernel fusion. Across a $2{,}048$-chip TPU v7x pre-training study of sparse Mixture-of-Experts (MoE) models from $6.5\text{B}$ to $63.1\text{B}$ parameters, SLA trains $11\%$--$24\%$ faster than KDA at similar perplexity, and reaches slightly lower perplexity than KDA in smaller matched-seed runs.

0.31

SymbolicLight V2: Hybrid Neuromorphic Architecture and Sparse Execution for Low-Energy Language Inference

cs.CL ·2026-09-09 ·Ting Liu
similarity 0.64
Abstract · 22 pages, 8 figures, 11 tables

SymbolicLight V2 combines sparse event computation with continuous-state processing in a hybrid neuromorphic language architecture. Extending V1's spike-gated dual paths, it adds graded signed events at further projections and softmax-free local attention. We implement the 194M-parameter model on an Alveo U50C FPGA using digital fixed-point arithmetic and on an ARM CPU using sparse integer execution. Across three same-checkpoint FPGA implementations at 175 MHz, active-row weight gathering and valid-state KV loading raise decode throughput from 474.6 to 643.2 tokens/s for a 32-token prefix and 128 outputs. Estimated gross card energy falls from 0.06087 to 0.04407 J per generated token, a 27.6% reduction. Complete-request energy, including prefill, falls by 24.4-27.7% across three prefix lengths. An independent idle split attributes 82.8% of gross card energy to loaded idle, explaining the benefit of shorter token latency. Against the recorded RTX 5090 compiled-FP32 baseline, integer FPGA execution uses 89.1% less estimated card energy during short-context decode; arithmetic precisions differ, and the GPU baseline is not the lowest-energy tested configuration. On four Cortex-A76 cores of a ROCK 5T, complete requests reach 65.4 tokens/s at 9.80 W and 0.151 J per generated token at the adapter's AC input. These results connect event sparsity to omitted computation and data movement. The mechanisms also support other dedicated V2 implementations: increasing throughput by a greater factor than active power lowers energy per generated token. Evaluation holds the deployed checkpoint fixed; its quality trails a same-budget dense control, so the results do not establish equal-quality efficiency.

0.28

A Pipelined FPGA Architecture for Banded Sparse Matrix Dense Matrix Multiplication in Longformer

cs.AR ·2026-10-05 ·Phillip Pramberger, Athanasios Tziouvaras, Shreejith Shanker, George Floros
published similarity 0.64
Abstract · Accepted at ICECS 2026

Sparse attention mechanisms have become increasingly important for transformer models processing long input sequences due to their lower computational and memory complexity compared to full self-attention. Longformer achieves this through a sliding-window attention mechanism that produces a structured banded sparse attention matrix. However, existing sparse transformer accelerators primarily target attention generation or unstructured sparsity, leaving sparse matrix--dense matrix multiplication (SpMM) for structured sparse attention largely unexplored. This paper presents a pipelined FPGA architecture for accelerating banded SpMM in Longformer. The proposed design exploits the predictable sparsity pattern of Longformer's attention matrix through a custom row-wise storage scheme with implicit indexing, eliminating the overhead of conventional sparse matrix formats while enabling regular memory accesses. The architecture employs parallel processing elements, pipelined adder trees, and a dual-path computation strategy to maximize throughput and hardware utilization. Implemented in Verilog and evaluated on an RFSoC platform using Vivado 2024.2, the accelerator sustains one complete dot-product result per clock cycle after an initial latency of 11 cycles while maintaining power consumption below 2.9 W. Operating at 100 MHz, the design achieves over 100 million dot-product outputs per second, demonstrating the effectiveness of directly exploiting structured sparsity for sparse transformer acceleration.

0.25