CS Paper Radar

When Are Nearby Experts Composable? Cross-Task Model Merging in Neural Thickets

Suxin Ji, Hungtao Wan, Mingjun Liu, An Zhang

cs.AI cs.CLcs.LG ·submitted 2026-11-08 06:38 UTC · v1
code/data

Abstract

Random perturbations around a shared checkpoint can produce experts for distinct tasks, but shared origin does not ensure that their gains survive composition. We formulate expert-pair selection for joint base-relative retention, measured by strict joint success and worst-task gain with unconditional abstention accounting. An exact finite-difference decomposition and an arbitrarily small orthogonal counterexample show why proximity and orthogonality alone are insufficient. We instantiate this formulation with quality-constrained spectral selection, a fixed-budget framework combining cross-task screening, layerwise pair geometry, separate validation, and Base fallback. Across six checkpoints, 21 task pairs, and five independent perturbation pools, the procedure improves strict joint success over Top-1 averaging throughout and leads the four-method model-scale comparison on four of six checkpoints. For the five models with at least 1.5B parameters, matched quality-only, global-cosine, and spectral ranking attain 49.1%, 50.5%, and 53.1% joint success. Under this matched protocol, the spectral selector also yields the highest worst-task gain and Weak Pareto rate and the lowest regression rate. Mean worst-task gain reaches +0.61 percentage points, while 17.1% regression and 13.0% abstention show that composability remains conditional. Project page: https://anonymous.4open.science/r/Thickets-Merge/.

Closest papers

Nearest neighbours by meaning across the whole index.

Merge++: Universal Merge Refinement Through Data-Free Checkpoint Inversion

cs.LG cs.AI ·2026-09-19 ·Aditya Pola, Vineeth N. Balasubramanian
similarity 0.69
Abstract

Model merging consolidates fine-tuned experts into one multi-task model without retraining. All existing data-free methods approach this problem entirely in weight space. Restricted to arithmetic on parameters, these methods never observe how each expert behaves, a signal that only emerges through forward evaluation. Accessing this behavioral signal requires inputs to evaluate on, which the data-free setting prohibits. We propose Merge++, a post-hoc method that addresses this by inverting the expert checkpoints to synthesize task-representative images, then distilling expert knowledge into the merged model using those images. Merge++ requires no additional data beyond the checkpoints themselves. It applies universally across merging algorithms and operates as a complementary refinement stage independent of the underlying weight-space method. The method consistently improves merging algorithms ranging from simple task arithmetic to state-of-the-art spectral methods, with average gains of +2 to +8 points and up to +25.9 on individual configurations.

0.08

Joint Null-Space Projection for Data-Free Model Merging

cs.CV cs.LG ·2026-11-12 ·Tian Xia
code/datahot direction similarity 0.69
Abstract

Merging independently fine-tuned checkpoints into a single multi-task model requires no data, no labels, and no gradient steps. In practice the task vectors of different tasks interfere, and the standard remedies--averaging, magnitude pruning, sign election--operate entry by entry, ignoring that each delta induces a low-dimensional update on the hidden features it acts upon. We recast merging as a subspace interference problem. For every two-dimensional weight tensor we take the top-r right-singular subspace of each task's delta--the input directions along which that task moves the representation most--and remove from each task vector the component lying in the union of the other tasks' subspaces. The resulting Joint Null-Space Projection (JNSP) is closed-form and order-independent, needs no forward pass, and is defined entirely by the checkpoint set. On eight CLIP image-classification tasks JNSP merges ViT-B/16 experts to 89.45% average accuracy without using a single image, 11.88 points above the strongest parameter-wise training-free baseline (TIES-Merging, 77.57%), 14.22 above Task Arithmetic, and 0.98 above WUDI's data-free consensus merge (88.47%). The gain holds across three backbones on the independently trained TALL release (+10.8, +12.6, +9.1 over TIES for ViT-B/16, ViT-B/32, ViT-L/14) and replicates there at 89.20%; controls confirm the source--a single shared subspace instead of per-task ones loses 2.9 points, and a sequential variant collapses to 69.6%. On RoBERTa-large the same projection underperforms plain task arithmetic, which we report rather than hide. Code is available at https://github.com.

0.28

From Checkpoint Variation to Selection Gains in Supervised Fine-Tuning

cs.LG cs.AI ·2026-09-29 ·Yupeng Chang, Wenxuan Zhang, Yuan Wu
similarity 0.66
Abstract

Checkpoint selection is a routine decision in supervised fine-tuning (SFT): training produces multiple checkpoints, but only one is retained. Yet fixed-budget comparisons do not by themselves distinguish three empirical claims: whether more validation data improve checkpoint selection, whether a selection rule outperforms validation-loss selection, and whether it improves over simply retaining the final checkpoint. We therefore treat checkpoint selection as a finite-information decision problem. Holding completed training trajectories, candidate checkpoints, and independent test items fixed, we vary the validation budget and separately measure improvement from additional validation data, gain over negative log-likelihood (NLL) selection, and gain over the final checkpoint. Across 60 mathematical SFT trajectories and 19 configurations, increasing the validation budget from 32 to 305-313 examples raises independent-test accuracy by 0.32 percentage points (pp) for generated-accuracy selection and 0.29 pp for checkpoint agreement, with 95% configuration-bootstrap CIs of [0.10, 0.56] and [0.11, 0.50], respectively. At the full validation budget, the two generation-based rules outperform matched NLL selection by 0.71 and 0.85 pp, respectively, while their gains over the final checkpoint remain unresolved. A cross-domain replication on 12 newly trained Commonsense trajectories shows the same qualitative separation: increasing the validation budget from 32 to 1,024 questions improves generated-accuracy and checkpoint-agreement selection by 0.87 and 0.27 pp, while gains over the final checkpoint again remain unresolved. Together, these results show that benefiting from more validation data, outperforming NLL selection, and outperforming the final checkpoint are distinct empirical claims that require separate evidence.

0.21

Reliability-Aware Checkpoint Selection for Domain Generalization

cs.LG cs.CV ·2026-09-30 ·Jinshi Liu, Jiahao Li, Pan Liu, Yanfeng Li, Rui Qian +3 more
code/data similarity 0.63
Abstract · 28 pages, 5 figures. Project page: https://github.com/Jjjjjjh666/Reliability-Aware-DG

Checkpoint selection in domain generalization often relies on source-validation accuracy, yet the selected checkpoint need not provide reliable probabilities on unseen target domains. Source-target distribution shifts can alter accuracy rankings, while accuracy alone does not measure predictive probability quality. We identify an empirical selection opportunity within fixed training trajectories: reselecting among checkpoints with near-optimal source accuracy can improve mean target probability quality with small observed changes in mean target accuracy. We study accuracy-constrained reliability selection (AC), which retains checkpoints within a tolerance of the best source-validation accuracy and ranks them by source reliability. Our reference rule aggregates within-set normalized negative log-likelihood (NLL) and class-wise calibration error (CwECE) using $D_\infty$. AC uses no target data and requires neither additional training nor weight averaging. We evaluate five domain generalization training algorithms on three benchmarks, using PACS to develop the objectives and a 0.5-percentage-point tolerance. In exploratory aggregation comparisons on 360 OfficeHome and TerraIncognita runs, the reference rule reduces mean target soft-bin squared-gap ECE and CwECE by 0.240% and 0.182%, respectively, and NLL by 0.030 relative to Source-Acc. Mean target accuracy changes by +0.213 percentage points. These results identify opportunities for reliability-aware reselection, while the additional benefit of joint over single-objective ranking remains unresolved.

0.28

QAM: Quadratic-Accurate Checkpoint Merging via Sequential Consistency

cs.LG cs.AI ·2026-09-28 ·Shihao Wang, Rui Kong, Xinran Chen, Hui Wu, Qipeng Qian +5 more
theory similarity 0.63
Abstract

Saved checkpoints record states along a training trajectory, but generally do not determine the updates at states that would be visited under a different schedule. We study how accurately these checkpoints can reconstruct the endpoint of a sequential reference with prescribed update strengths. Under a common local transition model, two checkpoint-index moment conditions characterize all convex merges that agree with this reference through second order. We then prove an information limit that for nondegenerate profiles, no algorithm using only a fixed-length gradient-descent (GD) history with step size $h$ can achieve $o(h^3)$ endpoint error uniformly over a fixed class of smooth, strongly convex losses. The lower bound follows from two losses with identical GD checkpoint histories but sequential reference endpoints separated by $Ω(h^3)$. \textbf{Quadratic-Accurate Merging} (QAM) achieves a matching uniform $O(h^3)$ endpoint error bound. Its explicit coefficients also define the unique profile-dependent merge that exactly matches the sequential GD reference across all fixed quadratic objectives. Across two public Adam checkpoint trajectories (SmolLM3-3B and OpenEuroLLM-Prelude-9B), three windows and three profiles per model, and 15 tasks, QAM shows mixed results for short windows and broader advantages over \textbf{Warmup-Stable and Merge} (WSM) for longer windows. Matched-moment GSM8K diagnostics further show that local consistency alone does not fully determine downstream scores. These results characterize the reconstruction limits of saved histories, provide a coefficient rule that attains the optimal rate, and assess its practical utility.

0.27

Good Pretraining, Bad SFT: Checkpoint Quality Across the Training Stack

cs.AI cs.CL ·2026-09-08 ·Sohir Maskey, Philipp Scholl, Jonas Knupp, Pit Neitemeier, Sascha Wirges
benchmark similarity 0.62
Abstract

Language-model checkpoints are commonly selected by pretraining loss or benchmark scores, assuming that the highest-scoring checkpoint will remain the best starting point for subsequent training. We show that this assumption can fail in a full 30B mixture-of-experts training pipeline. The checkpoints that perform better after the full downstream training stack also have higher solution density, i.e., retain downstream performance under local weight perturbations.

0.09

Reach or Solve? Deep Diving into Agentic RL Gains with Checkpoint Handoffs

cs.AI ·2026-09-17 ·Xuan Liu, Jingbin Qian
code/data similarity 0.60
Abstract

Reinforcement learning (RL) is widely used to improve language-model agents, and its gains are usually measured by final task success. However, an agent's earlier actions shape the states in which its later decisions are made, so final task success conflates the ability to reach useful states with the ability to complete the task once there. Comparing agents only on the states each one reaches does not separate the two, since each agent is then scored on states selected by its own actions. To address this conflation, we introduce checkpoint handoff, an evaluation protocol that decouples reaching from completing without retraining. One checkpoint acts as a reacher up to a handoff point, and another continues as the solver from the same replayed history. In detail, (1) Reach measures how often a reacher arrives at states that a replayable environment verifies to be a fixed number of actions from success, and (2) Solve measures how often a solver completes the task from identical cloned copies of those states. Crossing supervised fine-tuning (SFT) and RL checkpoints in both roles across two benchmarks and two independently released training pipelines, we find that the gain from switching the solver from SFT to RL is consistently larger when RL is the reacher, at all three model scales on TravelPlanner and on both ALFWorld splits. Further analyses on ALFWorld show that RL improves both Reach and Solve. The solver gain is larger under an RL reacher because RL reaches solvable states more often, and separately measured Reach and Solve gaps recover most of this difference. Because handoff only requires replaying one checkpoint's history under another, agentic RL evaluations can report arrival and completion alongside final success.

0.52

Early Memory Selection for Balanced Adam

cs.LG cs.AIstat.ML ·2026-10-06 ·Alberto Fernández-Hernández, Cristian Pérez-Corral, Jose I. Mestre, Manuel F. Dolz, Enrique S. Quintana-Ortí
code/data similarity 0.60
Abstract · Includes theoretical proofs and reproducibility appendices. Code and data: https://github.com/AlbertoFdezHdez/Adam_beta_rule_cubic

We propose a method for choosing the shared memory parameter $β_1=β_2=β$ in Adam from a short pilot training. The selected $β$ remains fixed during the subsequent full training. A local model of Adam's normalized direction balances sampling variability against the delay introduced by averaging past gradients. This balance gives a cubic memory rule, whose two coefficients are estimated from gradient probes at a few pilot checkpoints. The estimator uses the numerator and denominator jointly, preserving their covariance. With a 200-update pilot and sixteen probe gradients at each of four checkpoints, a seed-matched retrospective evaluation on eleven vision and language workloads reduces mean relative validation gap by 40.7% and worst-quarter mean gap by 44.3% against the grid representative of shared $β=0.95$. The mean gap is also 32.3% lower than that of the best constant $β$ chosen across all eleven workloads.

0.41