CS Paper Radar

GOPR-CAD: Graph-of-Operations Progressive Reasoning for CAD Generation

Yitian Pang, Yifan Li, Xiaowei Yue, Li Zheng

cs.AI ·submitted 2026-11-08 16:07 UTC · v1
benchmark

Abstract

Generating accurate CAD models requires substantial engineering expertise and careful control of geometry, topology, and mechanical constraints. Text-to-CAD aims to simplify this process, but current LLM-based methods often generate CAD programs directly. Language models remain unreliable when producing long code while coordinating coupled geometric, topological, and dimensional constraints. Consequently, executable programs may still produce structurally incorrect models, which execution rate and rendered appearance may fail to reveal. To address these limitations, we propose GOPR-CAD, an agentic Text-to-CAD pipeline based on Graph-of-Operations Progressive Reasoning. A language model acts as a decision agent over encapsulated CAD operations and progressively constructs an executable operation graph, which a deterministic compiler converts into the final CAD model. This separation requires no additional training and supports different language models. To evaluate structural fidelity, we construct MHCAD, a benchmark of 300 standard mechanical part requirements derived from Machinery's Handbook. Their explicit structures enable reference-free STEP/B-rep evaluation. GOPR-CAD achieves 82.7% Structural Yield on MHCAD, and 87.2% Structural Yield on an external CADPrompt subset.

Closest papers

Nearest neighbours by meaning across the whole index.

Automated Assembly Instruction Generation from CAD Models Using Grounded Large Language Models: A Human-in-the-Loop Framework

cs.LG ·2026-10-08 ·Aaron Dsouza, Mohammed Azeez Khan, Ashutosh Mishra, Arshaan Khan, Neha K. Nair +1 more
hot direction similarity 0.77
Abstract · Withdrawal requested as one of the co-authors did not consent to the publication of the manuscript

Assembly documentation is a downstream manufacturing artifact that is still usually authored by interpreting CAD models by hand. Structured product data and large language models are both available, yet studies of CAD interpretation, assembly sequence planning, instruction writing, and human oversight have largely proceeded separately. This paper formulates CAD-grounded assembly instruction generation: the production of natural-language assembly procedures constrained by structured engineering information extracted from CAD models. The proposed framework maps a STEP assembly to a typed ProductGraph intermediate representation, derives a precedence order by deterministic topological sorting, realizes each step as language conditioned only on selected graph context, attaches per-step visual documentation, and applies rule-based and model-assisted checks. PDF export remains disabled until a human reviewer resolves every quality flag. The case study establishes endto-end feasibility on a built-in six-part reference assembly: the pipeline preserves a reported assembly order and carries quantity, material, and torque into an exported manual page. Generalization and geometric validation remain open empirical questions. The contribution is an architecture that separates engineering state, deterministic reasoning, grounded language realization, verification, and human release.

0.21

Assessing the CAD Capabilities of General-Purpose AI Models: A Case Study of GPT-6 Astra

cs.GR ·2026-10-17 ·Qiang Zou, Jiajun Shen, Zhijie Yang, Yuhao Wang, Shitianyi Leng +1 more
code/data similarity 0.76
Abstract · The paper contains 13 pages of contents that summarize the 181 page long full report of CAD Capabilities of General-Purpose AI Models. The p…

Recent advances in general-purpose AI models and agentic systems have enabled them to perform some CAD tasks. A systematic assessment is now needed to establish what these systems can accomplish and how well their outputs meet engineering requirements. This paper presents an empirical study of GPT-6 Astra, a SOTA general-purpose AI model, across four basic CAD tasks: model understanding, generation, editing, and evaluation. We design test cases spanning different levels of complexity and engineering requirements. The results show that GPT-6 Astra can support multiple stages of CAD workflows, with successful outcomes in cases involving nontrivial geometric complexity. This suggests that general-purpose AI is beginning to offer practical value in almost all steps in CAD workflow. However, gaps remain between generating visually plausible geometry and producing valid, functional, and editable CAD models. Recurring errors in freeform geometry, parameter dependencies, and mating relationships between parts limit engineering usefulness. Agentic iterative refinement can improve results but does not consistently resolve critical errors; long completion times further constrain practical use.

0.28

ReliCAD: From Uncertain LLM Generation to Reliable Parametric CAD Modeling

cs.RO ·2026-09-16 ·Peng Zheng, Xintong Dong, Chuanyang Li, Jiaxin Jing, Chuqi Han +3 more
similarity 0.75
Abstract

Large language models have shown considerable potential for natural-language-driven parametric CAD modeling. However, a fundamental contradiction exists between their probabilistic generation and the deterministic requirements of CAD modeling, resulting in limitations in reliability, design-intent preservation, and geometric validity. Existing methods typically rely on large-scale annotated datasets, lack explicit modeling of design intent, and underutilize the deterministic capabilities of CAD kernels. To address these limitations, we propose ReliCAD, a unified framework that transforms uncertain LLM generation into reliable parametric CAD modeling. Through explicit design-intent modeling, ReliCAD converts user requirements into structured design specifications and explicitly models geometric relations, topological dependencies, and feature construction order. It then generates constraint-aware parametric instructions and invokes the CAD kernel through an Agent-ready API to perform geometric construction and constraint solving. ReliCAD further records runtime evidence and employs a verification-feedback mechanism to assess consistency between the generated model and the design specifications, enabling error localization and iterative repair. Experiments on the public HistCAD generation dataset and our multi-granularity CAD editing dataset demonstrate that ReliCAD significantly outperforms baseline methods, achieving 99.8\% validity rate and 0.8753 IoU. ReliCAD provides a verifiable, repairable, and generalizable approach to natural-language-interactive CAD modeling.

0.12

Parametric CAD Bench v3: Evaluating Agentic Parametric CAD Authoring from Text and Engineering Drawings

cs.AI cs.CVcs.GRcs.LG ·2026-11-02 ·Mei Chen, Yu Xia, Haipeng Mao
benchmarkcode/data similarity 0.73
Abstract · 31 pages, 12 figures, 11 tables. Benchmark: https://cadbench.ai/ ; tasks and leaderboard: https://hub.harborframework.com/datasets/gnucleus-…

Producing an executable CAD script is not sufficient to establish that an agent has satisfied an engineering design request. Evaluation must also consider the resulting geometry, specified dimensions, and native CAD modeling history. We present Parametric CAD Bench v3, a 100-task benchmark comprising 30 text-to-CAD creation tasks, 30 text-to-CAD create-and-edit tasks, and 40 tasks that reconstruct mechanical parts from engineering drawings. Agents operate in a pinned FreeCAD environment and submit native CAD artifacts to a separate programmatic verifier. The primary metric is mean continuous task reward, combining geometry similarity and specification consistency rather than binary task success. A September 24, 2026 snapshot covers 13 model-agent systems; Claude Code with Claude Opus 5.5 achieves the highest overall point estimate, 61.03%, and an image-to-CAD mean reward of 84.66%. These measurements describe complete systems, not isolated model capabilities. We release versioned tasks, evaluation configurations, and inspectable result artifacts.

0.31

CIT-CAD: Constraint Intent Tree-based CAD Code Generation and Verification

cs.AI cs.SE ·2026-09-07 ·Yali Du, Hui Sun, San-Zhuo Xi, Ming Li
similarity 0.72
Abstract

Natural-language Computer-Aided Design (CAD) code generation aims to turn design intent into executable and editable parametric programs. Large language models (LLMs) make this goal increasingly practical, but useful systems must preserve the construction process behind the rendered geometry. Existing benchmarks and methods mostly focus on how closely the generated CAD model matches the reference geometry, often using metrics such as Intersection over Union (IoU). Such metrics can miss errors in part decomposition, construction hierarchy, Boolean operations, sketch structure, and geometric relations. This gap calls for a representation that makes design intent explicit and lets a system check generated code against that intent. We propose CIT-CAD, a framework that infers a Constraint Intent Tree (CIT) from the input description to represent the intended entities, hierarchy, operations, and relations. The tree has two roles: it guides CAD code generation and defines expected constraints for verification. The framework extracts actual constraints from the generated program, compares them with the expected constraints, and uses mismatches to localize and repair design violations. Experiments show that the framework improves CAD generation performance, with larger gains on more complex multi-entity designs. By turning design intent into an explicit and checkable object, this work is the first attempt to move text-to-CAD generation beyond rendered-geometry matching toward construction-aware synthesis, verification, and repair.

0.24

CADWorld: Computer-Use Benchmark for Long-Horizon Computer-Aided Design

cs.AI ·2026-09-14 ·Zihan Dong, Yuanzhe Liu, Zhiyuan Ma, Qishi Zhan, Dehan Kong +2 more
benchmark similarity 0.71
Abstract

Computer-use agents are increasingly evaluated in realistic desktop environments, but existing benchmarks provide limited coverage of professional engineering workflows whose outputs are persistent, structured artifacts. Mechanical computer-aided design (CAD) is a particularly demanding setting: an agent must manipulate geometry and constraints over long interaction horizons while producing a native project whose dimensions, construction structure, and downstream engineering state remain valid. We introduce \textbf{CADWorld}, a benchmark for long-horizon computer use in FreeCAD. CADWorld contains 200 tasks spanning 11 mechanical-CAD workflow categories, including sketching, part modeling, assembly, CAM, FEM, measurement, mesh processing, and technical drawing. Agents operate through screenshots and GUI actions, while success is determined by task-specific executable checks over saved FreeCAD artifacts and auxiliary outputs, covering geometric properties, parametric structure, constraints, manufacturing state, and simulation results. Across seven current agents on the full benchmark, the strongest agent achieves 17.5\% success, compared with an 87.0\% expert reference pass. We find that weaker agents often fail before producing a valid artifact, whereas stronger agents increasingly fail on structural, geometric, and construction-process requirements. CADWorld therefore exposes a gap between general GUI competence and reliable execution of persistent, verifiable engineering workflows. Project accessible at https://cad-world.github.io.

0.46

Composable CAD: Sketch-to-CAD Program Synthesis in Parts

cs.GR ·2026-10-31 ·Yuanbo Li, Vivian Liu, Sean Liu, Justin Matejka
similarity 0.71
Abstract

Designers often build CAD models part by part, and may iterate on individual components throughout the design process. Recent vision-language models (VLMs) can synthesize CAD programs from sketches, but generating parts independently does not ensure that they are composable: components may lose the intended proportions and alignments or fail to join correctly where they meet. We present Composable CAD, a framework that uses off-the-shelf VLMs to synthesize a design space of independently sampled, interchangeable component programs, where any selection composes into a coherent CAD model. We recover design constraints from the sketch and use them to construct a coarse proxy that establishes how the components are sized, aligned, and attached. We then generate each component independently from its proxy and apply a deterministic rewrite to ensure that neighboring components meet at their prescribed interfaces. We evaluate Composable CAD across a range of objects and sketch styles and conduct two user studies. Compared to VLM-only baselines, our method produces more detailed, composable designs.

0.16

StepCAD: Mesh-to-CAD Code Generation via LLM Policy and Geometry-Guided Search

cs.CV cs.LG ·2026-10-01 ·Ghadi Nehme, Faez Ahmed
code/data similarity 0.71
Abstract

Recovering executable CAD programs from 3D meshes is challenging due to the compositional nature of CAD construction and the interaction between discrete modeling choices and continuous parameters. Many learning-based methods predict complete programs in a single pass and rely predominantly on sketch-extrude representations, limiting operation diversity and opportunities to correct geometric errors during reconstruction. We introduce StepCAD, a generative optimization approach that combines a state-conditioned CAD policy with geometry-guided search. Given an input mesh, the policy predicts construction actions conditioned on both target and intermediate geometry, and an IoU-guided tree search refines the resulting program through local edits. We also introduce ARCADE-1.5M, a large-scale dataset of 1.5M executable CAD programs spanning diverse operations, sequences with a maximum length of 150+ counted operations, and 12.5M intermediate state-action transitions. Experiments across multiple CAD reconstruction benchmarks show that StepCAD achieves state-of-the-art geometric reconstruction accuracy with consistently high validity, yielding up to 87.2% relative IoU improvement over the strongest evaluated baseline, with particularly large gains on complex shapes. Project page: https://ghadinehme.com/stepcad.github.io/

0.54