CS Paper Radar

GenISys: Integrated Ship Systems Design Using Subsystem-Conditional Tabular Diffussion

Noah J. Bagazinski, Faez Ahmed

cs.LG ·submitted 2026-11-08 21:09 UTC · v1

Abstract

Ship design requires coordinating coupled subsystems to satisfy engineering constraints and balance competing performance and cost objectives. Generative artificial intelligence has supported component design, but integrated ship generation must also account for interactions among hull geometry, structure, propulsion, and operation. This paper presents GenISys, a framework for generating integrated systems, demonstrated through early-stage bulk-carrier design. Its dataset contains 217,999 proposed designs, including 16,247 that satisfy the formulated engineering constraints. The proposed simultaneous conditional denoising diffusion probabilistic model (SCDDPM) generates subsystems together, allowing each subsystem model to respond to changes elsewhere during generation. Experiments compare this approach with monolithic whole-ship generation and sequential subsystem generation across five independent training runs per architecture. In a study targeting lower cost per tonne of cargo transported, designs were generated for a required voyage range of 5,000 nautical miles. SCDDPM produced designs satisfying the formulated engineering constraints and meeting a common low-cost target in 55.70% of generation requests, compared with 51.10% for the monolithic model and 47.54% for the sequential model. These correspond to 9.0% and 17.2% more qualifying designs, respectively, while maintaining similar estimated transport costs. These results show how generative artificial intelligence can coordinate subsystems to generate feasible, high-performing integrated systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Localized Generative Design of Ship Hulls with Diffusion Models and High-Fidelity Assessment

cs.AI math.APmath-ph ·2026-10-09 ·Hadi Keramati, Mohammed A. Hannan, Patrick Kirchen, Sina Tousi, Joonas Riekkinen +2 more
benchmark similarity 0.60
Abstract

Practical ship design requires localized refinement and performance evaluation. This paper presents a reward-directed diffusion framework for localized hull optimization. Parametric masking during dataset generation restricts geometric changes to selected variables, including the bulbous bow and forebody, while preserving full-hull continuity. Surrogate-assisted sequential Monte Carlo sampling targets reduced predicted calm-water resistance, with stability retained through training data and displacement matched during screening. An automated viscous free-surface CFD pipeline, validated against measurements for two benchmark container ships, evaluates a generated variant and GenHull E, a hull refined by a naval architect within the same representation. At matched KRISO Container Ship (KCS) displacement, the generated variant has comparable total resistance at $F_n=0.195$ but 45-50% higher resistance at $F_n=0.250$ and $0.260$, missed by empirical screening. GenHull E achieves 6-8% lower total resistance up to $F_n=0.240$ but higher resistance above $F_n=0.250$ as opposing friction and pressure trends reverse the gains. Aggregating resistance across this crossover can conceal tradeoffs that emerge when friction and pressure components are evaluated separately. The assessment reveals an inability to represent a faired bulbous bow and a reward lacking viscous pressure and stability terms. These findings show how high-fidelity assessment informs improved representations and objectives for physically realizable generative designs.

0.24

Comparative study of global pooling for pre-departure ship fuel consumption prediction: Advantages over per-ship and adaptation-based approaches

cs.LG cs.AI ·2026-11-02 ·Heungjun Im, Bongmin Cha, Agung Nugraha, Donghyun Kim, Seongphil Kang +3 more
similarity 0.53
Abstract · 34 pages, 11 figures, 19 tables

Most fuel oil consumption (FOC) models for voyage planning are per-ship models and thus generalize poorly beyond each vessel's records. Transfer and federated learning have been reported to perform better, but under different protocols that often use inputs unavailable before departure or random data splits. It therefore remains unclear which approach performs best. In this study, we compare 11 per-ship, adaptation-based, and global methods on 21 vessels. To prevent leakage, all methods receive identical inputs known or forecast before departure, excluding engine RPM and shaft power, and are tested on intact voyage legs after all training records of each vessel. Global pooling, in which one model describes each vessel by its ship identity and seven ship specifications, performs best overall in every setting examined. For in-fleet vessels, Global LightGBM reaches an overall MAPE of 8.92%, against 11.14% for Per-Ship LightGBM, and outperforms every per-ship and adaptation-based model. Global models of five architectures, including a Transformer, all outperform the per-ship and federated models. Fine-tuning a global model for each vessel, even by low-rank adaptation of the Transformer, adds no accuracy. Without any records of a vessel, the global model reaches a median MAPE of 11.20% and outperforms a per-ship model trained on that vessel's records for 14 of 21 vessels. Adding its first records to the pooled data is as accurate as vessel-specific adaptation. Ship identity and specifications are largely interchangeable for in-fleet vessels, but only the specifications support zero-shot prediction. Its error grows as a vessel's specifications differ from the fleet's. Per-ship models and vessel-specific adaptation are therefore unnecessary under fair comparison. One global model can serve a whole fleet, including newly delivered vessels with similar specifications.

0.24

NL2Hull: A Natural Language-Driven Constrained Ship Design Decision Framework

cs.AI ·2026-10-07 ·Wenhua Huo, Fenglei Han, Wangyuan Zhao, Jialin Wu, Jiayi Han
benchmarkdatasetcode/data similarity 0.52
Abstract · 23 pages, 8 figures, 10 tables

Ship-form design combines smooth geometric representation, local shape editing, and constraints on the resulting hull. We present the Natural-Language-to-Hull Framework (NL2Hull Framework), which formulates ship-form editing as a typed discrete decision problem and connects language decisions to numerical geometry. Its Constrained Free-Form Deformation Engine (CFFD Engine) represents hull waterlines with non-uniform rational B-splines (NURBS), applies free-form deformation (FFD) to their control points, reconstructs the hull, and checks geometric constraints. We construct the Ship Design Decision Dataset (SDD Dataset) with 134,558 cleaned records and evaluate compared models on its subset Ship Design Decision Benchmark (SDDBench), containing 5,000 records and 43,496 typed questions. We propose Chip, a constrained ship-design decision model for processing natural-language requests. Chip reaches 95.90\% question accuracy and 99.32\% FFD exact match, with a negative log-likelihood of 0.0951, an expected calibration error of 0.0032, and a Brier score of 0.0551. The NL2Hull Framework provides a reproducible interface for evaluating language-based ship-form decisions while identifying the geometry and continuous-control components that require further development. Our code and dataset is available at https://github.com/wenhuahuo/NL2Hull.

0.39

Marine Autonomous Vehicle Fleet Scheduling to Maximise Scientific Impact

cs.RO math.OC ·2026-08-27 ·Mehdi El Krari, Jonathan Smith, Maria Fox
similarity 0.52
Abstract

The marine science community increasingly relies on Marine Autonomous Vehicles (MAVs) to collect the critical environmental data required to understand global ocean systems. However, as these operations scale, manually routing and planning large autonomous fleets becomes exponentially complex and time-consuming. To address this, we propose a mixed-integer linear programming (MILP) model designed to automate and optimise MAV deployment schedules. The model accounts for strict operational constraints, including battery capacities and time windows for data collection, while aiming to maximise total data collection and minimise both the number of deployed vehicles and their energy consumption. A key novelty of this framework is integrating conventional ship itineraries, allowing MAVs to support vessels with mid-mission battery swapping or accelerated transit between waypoints. Computational experiments demonstrate that the model is highly scalable, solving routing problems for fleets of dozens of MAVs in seconds, and scaling to hundreds of vehicles in only a few minutes. Beyond operational scheduling, the framework serves as a robust simulation tool for evaluating 'what-if' scenarios and analysing the impact of varying parameters on deployment strategies. Finally, the solution generates a suite of visualisations designed to enhance explainability and support strategic decision-making for stakeholders.

0.16

Generative AI-Driven Parametric Design Optimization Framework for Vehicle Closure Systems

cs.LG ·2026-11-16 ·Dongeon Lee, Yurim Lee, Jiyong Kim, Sanghyeon Kim, Sanghyun Lee +3 more
similarity 0.51
Abstract · 26 pages, 15 figures

This study presents a generative AI-driven parametric design optimization framework integrating performance-oriented generation with editable computer-aided design (CAD) and downstream computer-aided engineering (CAE) analysis for industrial vehicle closure systems. The framework is demonstrated on an automotive tailgate assembly with complex geometry, coupled components, and competing performance and feasibility requirements. A production-oriented CATIA model is restructured into a reference-based parametric template with a 13-dimensional design representation. An automated CAD/CAE workflow generates parametric models, performs structural analysis, and constructs a database of mass, maximum displacement, and maximum von Mises stress. Gaussian process regression surrogates predict performance, while diffusion and flow matching models generate design candidates. The design problem minimizes mass and maximum displacement, with stress assessed as an engineering feasibility constraint. Performance-guided generation using surrogate guidance and performance-aware training using a performance-aware loss incorporate engineering objectives, with sensitivity to guidance scale and loss weight evaluated. Generative search is compared with NSGA-II under matched evaluation budgets using a common surrogate model. Selected Pareto-region candidates are reconstructed in CATIA and re-evaluated through native CAE; all verified candidates are successfully regenerated and analyzed. Relative to the baseline, the knee-point design reduces mass by 7.1% and maximum displacement by 29.4%, while extreme verified solutions achieve maximum reductions of 10.3% and 37.3%, respectively. The results demonstrate performance-oriented multi-objective design exploration compatible with editable industrial CAD and native engineering verification.

0.30

Hierarchical Bayesian optimization of an aircraft-based multi-agent system-of-systems

cs.LG cs.MAmath.OC ·2026-08-23 ·Paul Saves, Thierry Lefebvre, Nathalie Bartoli, Jasper Bussemaker, Nikolaos Kalliatakis +2 more
published similarity 0.51
Abstract

Developing innovative system architectures increasingly relies on advanced modeling and optimization techniques to frame the architecting process and define the corresponding computational problems. For complex System-of-Systems (SoS), high-fidelity multiphysics and multidisciplinary simulations are essential for capturing detailed behaviors. However, their computational expense and the risk of evaluation failures make direct optimization challenging. To overcome these limitations, surrogate-based approaches, like Bayesian optimization, have emerged as effective tools for managing expensive, black-box simulation tasks. This work introduces a hierarchical Bayesian optimization framework that leverages Gaussian process meta-modeling to handle discrete architectural choices, conditional dependencies, and heterogeneous design variables inherent to SoS problems. Results show that the hierarchical formulation improves search efficiency and robustness compared to conventional surrogate-based methods, enabling the exploration of large and structurally diverse design spaces with limited simulation budgets. We apply the approach to an aircraft-based multi-agent system for wildfire suppression, a use case developed within the EU-funded COLOSSUS project that illustrates how SoS principles can coordinate heterogeneous aerial platforms with complementary roles, supporting both sustainable mobility and emergency response missions. Our framework provides a scalable methodology for SoS architecting and model exploration, offering transferable insights for applications in aviation, sustainable mobility, and resilience-oriented system design. By combining hierarchical representations with surrogate-based optimization, this work is among the first practical demonstrations of hierarchical Bayesian optimization applied to real-world SoS problems, advancing both methodology and practice.

0.51

Procedural Generation of Conceptual 3D Ship Internal Arrangements for Design-Space Exploration

cs.CE ·2026-10-07 ·Kirsten Odendaal, Roy de Winter
code/data similarity 0.50
Abstract · 17 pages, 7 figures, 5 appendices

Ship internal arrangement is a complex spatial design problem in which competing functions within a fixed volume affect spatial relationships, mass distribution, trim, and stability. Exploring these trade-offs requires many layouts in a common format, yet public general-arrangement drawings are scarce, inconsistent, and two-dimensional. This study develops a common framework for generating conceptual 3D internal arrangements across six vessel families: bulk carriers, tankers, container vessels, offshore support vessels, patrol vessels, and yachts. Each arrangement uses paired voxel grids and topological graphs for spatial and connectivity analysis. The framework is evaluated through three experiments: (i) comparison of 50,000 generated arrangements with 23 reconstructed real references, (ii) envelope-constrained reconstruction of one reference per family, and (iii) response of generated layouts to requested function volumes. Generated design spaces broadly align with references within each family's sampling range. Searching alternative spatial subdivisions improves reconstruction across all families, with voxel accuracy reaching 75.5%. Fuel and ballast allocations respond near-proportionally to requested volume, while other functions depend on subdivision capacity, compartment eligibility, and discrete assignment. A fixed-hull offshore support vessel application shows that the same hull and requested programme can produce different adjacency and trim outcomes, with five nondominated concepts among 119 of 500 alternatives meeting stability and programme criteria. The results support layout design-space exploration across vessel families and changing requirements, with spatial organisation remaining important beyond volume compliance. The generator and conceptual general arrangement dataset are released publicly for reproducible analysis, benchmarking, and learning-based design studies.

0.41

A Constraint-Aware Generative Framework for Synthetic Origin-Destination Demand in Logistics Networks

eess.SY cs.LGstat.ML ·2026-09-03 ·Leian Chen
similarity 0.50
Abstract · 13 pages

Large-scale logistics networks require synthetic data generation capabilities to support scenario-based planning under novel conditions-such as network reconfiguration and demand shocks. Existing approaches, which rely primarily on historical observations, lack the ability to generate demand patterns that adapt to changes in network topology while respecting operational constraints. We propose a constraint-aware conditional generative framework for synthetic origin-destination demand generation in hierarchical logistics networks. The framework models demand as a conditional distribution over destinations given each origin, enabling topology-aware synthesis that is both topologically realistic and operationally feasible. Operational guidance is incorporated directly into the generative objective via differentiable constraints, while a flexible conditioning mechanism supports various operational contexts and adaptation to evolving network configurations. We instantiate the proposed framework based on a conditional generative model. Experimental validation on industrial real fulfillment and transportation network demonstrates 16% improvement over graph neural network baselines, 87% operational compliance, and efficient cold-start adaptation, enabling applications in capacity planning, network design evaluation, and routing optimization.

0.15