CS Paper Radar

Predictive Neuromorphic Control of a Scanning Mirror System: An Event-Centric Framework

Changrui Liu, Robin Wroblowski, Anil Alan, Shengling Shi, Rodolphe Sepulchre, Bart De Schutter

eess.SY math.OC ·submitted 2026-11-08 21:36 UTC · v2

Abstract

Organizing control around events can reduce sensing and actuation demands while directly linking control decisions to the occurrence and timing of desired system behaviors. This paper proposes a novel event-centric model predictive control (MPC) framework that unifies event sensing, event prediction, and event regulation. Events define the feedback information, prediction horizon, and event-timing objectives, placing them at the center of predictive control design. The framework is developed for a scanning mirror system equipped with a baseline neuromorphic controller composed of spiking neurons that supports sparse actuation. The control objective is to achieve prescribed zero-crossing times and a desired scanning range while minimizing the mechanical energy transferred between the actuator and the mirror. A sampling-based algorithm is presented to obtain suboptimal solutions of the event-centric MPC optimization problem without requiring an explicit event-to-event prediction model. By grounding predictive optimization in events, the proposed framework opens a new direction for MPC design and its integration with neuromorphic control.

Comment
8 pages, submitted to ECC27, this work is the first, foundational work that proposes Event-Centric Model Predictive Control (EC-MPC), a framework that combines model predictive control and neuromorphic control. Philosophy: predicting events but not trajectories; regulation without calibration

Closest papers

Nearest neighbours by meaning across the whole index.

Switch-Time-Aware Hybrid Model Predictive Control Using the Hybrid Minimum Principle

cs.RO eess.SY ·2026-10-16 ·Valentin Gaucher, Wenlong Zhang
similarity 0.58
Abstract · 8 pages; 4 figures, 2 tables

This article presents a time-aware hybrid model predictive control (MPC) framework that simultaneously optimizes the objective with respect to both continuous control inputs and event switching times. Rather than relying on a fixed time grid, the switching instant is lifted into the decision vector and treated as an explicit optimization variable. The resulting transcription is a smooth nonlinear program whose Karush-Kuhn-Tucker (KKT) conditions are consistent with the Hybrid Minimum Principle (HMP) event-time stationarity condition, so first-order hybrid sensitivities are recovered implicitly through the KKT system rather than by evaluating saltation matrices. Each MPC step solves a single sparse Quadratic Program (QP), jointly optimizing control inputs and impact timing in real time. On a bouncing mass landing on an oscillating platform, the method attaches in half the time of fixed-grid saltation MPC, reduces cumulative control effort by 30%, and removes the post-impact rebounds, at a 15% increase in per-cycle solve time. It matches the cumulative effort of offline time-aware solvers to within 4% while running at 2.4 ms per cycle against 281 ms for a complementarity-based formulation of the same problem, of which a 10.6x reduction is attributable to the transcription alone at a fixed solver.

0.34

Sparsity in control problems: Recent trends and open challenges

eess.SP math.OCeess.SY ·2026-10-07 ·Luca Ballotta, Geethu Joseph, Waseem Abbas, Sophie M. Fosson, Chandra R. Murthy +4 more
survey similarity 0.57
Abstract · Submitted to Annual Reviews in Control. FIx author name

As in all fields of engineering, control engineers constantly face a dichotomy between achieving high performance and the limited availability of resources for sensing, actuation, and control. This tension often translates into formalizing design problems with sparsity constraints; that is, the design involves decision variables whose number, spatial reach, temporal spread, or other physical expressions are much smaller than in the ideal scenario of unconstrained optimization of a task-related performance metric. Even though this fundamental limitation underlines a plethora of methodological approaches and application domains, the control literature is fragmented into several lines of work tailored to specific scenarios. This survey fills the gap by bringing together several lines of work on handling sparsity in relevant control problems such as actuator scheduling, minimal-energy controllability, maximum hands-off control, and online convex optimization, and weaving a red thread through theoretical foundations and algorithms. Beyond establishing a coherent, structured narrative of problems and solutions for handling sparsity in control scenarios, we discuss open areas and relevant directions for future research, motivated by the growing complexity of control systems and their relations with key domains such as pervasive computing, distributed learning, cyberphysical security, and ecological footprint.

0.25

An Integrated Architecture for Data-Efficient Real-Time Neural Imitation of Nonlinear Time-Optimal Model Predictive Control

eess.SY cs.LGcs.RO ·2026-11-12 ·Maarten De Baecke, Flavia Sofia Acerbo, Andrea Giusti, Wilm Decré
similarity 0.55
Abstract · Submitted to European Control Conference 2027 (Brussels)

Nonlinear time-optimal model predictive control (TOMPC) enables highly performant control of constrained systems, but its computational cost prohibits real-time use on fast dynamical systems. Neural network imitation of the TOMPC control law can reduce online computational costs, yet existing work mostly targets quadratic cost formulations in simulation and addresses the challenges of neural controllers in isolation. This work imitates a long-horizon nonconvex TOMPC with hard terminal constraints, whose high computational cost limits training-data generation. We present (i) \emph{self-informed sampling (SIFS)}, a data-efficient expert-sampling strategy that uses a learned time-to-go to query the expert only where the policy deviates from time-optimal behavior, (ii) a complete training and control architecture that jointly addresses dataset correlation, suboptimal expert labels, covariate shift, constraint satisfaction and model mismatch, and (iii) real-world validation on a Furuta pendulum. SIFS matches standard dataset aggregation performance in roughly one-third of the training time and with less than half the training data. The resulting controller matches the region of attraction of the expert TOMPC while raising the control frequency from 1.4~Hz to 1~kHz. On hardware, the controller swings up and stabilizes the pendulum along trajectories closely matching the expert TOMPC solution.

0.23

A Unified Framework for Empowerment and Predictive Control

cs.RO ·2026-10-02 ·Wooyoung Chung, Tristan Shah, Volodymyr Makarenko, Stas Tiomkin
similarity 0.53
Abstract

Sampling-based model predictive control (MPC) is a powerful approach to trajectory optimization, but its performance depends on an informative cost function that often requires substantial domain knowledge to design. An alternative is to derive objectives directly from the system dynamics. Empowerment, defined as the channel capacity between an agent's inputs and its future state, provides such a goal-agnostic objective and has been shown to produce useful behaviors across a range of domains. However, existing empowerment-based controllers have two key limitations: empowerment is estimated using a virtual probing policy distinct from the executed control policy, obscuring its connection to the resulting behavior; and its computation typically requires second-order derivatives of the dynamics, limiting compatibility with standard MPC methods. We formulate empowerment using a single policy for both probing and acting, directly linking the empowerment objective to the executed behavior. The resulting objective requires only first-order derivatives and can be optimized with standard MPC solvers, either alone or in combination with a task-specific cost. We evaluate the proposed approach on classical control tasks and show that combining empowerment with task costs matches or exceeds the success rate achieved by either objective alone. Our formulation provides a practical bridge between standard MPC and intrinsically motivated control.

0.21

Hybrid Feedback Sampling for Sample-Efficient Model Predictive Control

cs.RO eess.SY ·2026-08-19 ·Chaoyi Pan, Zeji Yi, John Zhang, Zachary Manchester, Guannan Qu +1 more
similarity 0.53
Abstract · 15 pages, 6 figures

Thanks to its parallelizability and flexibility, sampling-based Model Predictive Control (MPC) has become widely popular for controlling real-world robotic systems. However, for high-dimensional and open-loop unstable dynamical systems, the required number of samples to improve the control sequence will grow exponentially with the horizon, leading to poor sample efficiency and numerical instability. This paper investigates the instability of shooting methods in sampling-based MPC and shows that the optimal sampling proposal distribution can be realized by sampling with an optimized feedback policy. We refer to this algorithm as Feedback Sampling MPC (FS-MPC). FS-MPC involves a hybrid sampling design which balances local and global search based on the system stability and the available computation budget. Our theoretical analysis shows that our hybrid sampling approach achieves faster convergence than standard MPPI and better optimality than standard feedback sampling. Empirically, in diverse contact-rich control tasks like humanoid loco-manipulation and dexterous manipulation, we show that FS-MPC successfully tackles dynamically unstable tasks where standard sample-based approaches struggle, and strictly outperforms feedback policies alone. Finally, we validate our method on humanoid robot locomotion and manipulation tasks in the real world.

0.47

Real-Time Dynamics-Based Torque-Sampling MPPI for Compliant and Force Aware Manipulation

cs.RO ·2026-09-02 ·Euncheol Im, Taehyun Kim, Yonghwan Oh, Myotaeg Lim, Yisoo Lee
published similarity 0.52
Abstract · 8 pages, 6 figures. Accepted to the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This study proposes a novel Model Predictive Path Integral (MPPI)-based task-space control framework. The proposed framework explicitly solves rigid-body dynamics within a real-time MPC formulation and enforces safety constraints, enabling accurate motion and force control that yields compliant behaviors for safe and effective physical interaction of robotic manipulators in unstructured environments. By leveraging MPPI, the proposed framework efficiently handles nonlinear dynamics that are difficult to solve with conventional MPC approaches in real-time. Furthermore, we develop a torque-sampling-based control architecture that enables efficient exploitation of GPU-based parallelization, resulting in effective compliant and force-aware behaviors. As a result, the proposed framework achieves a solver update rate of over 166 Hz with a 0.18 s prediction horizon, and its performance is validated through real-world experiments on a 7-DoF manipulator.

0.38

Predictive Zonotope Reduction: Precise Runtime Monitoring under Uncertainty

cs.RO cs.LOeess.SY ·2026-09-03 ·Vladimir Krsmanovic, Florian Kohn, Bernd Finkbeiner, Milan Simovic
similarity 0.52
Abstract

Robots operating in physical environments make control decisions based on uncertain sensor measurements, which can lead to unsafe or suboptimal actions. Runtime monitors that check their behavior against safety specifications must represent this uncertainty soundly. Zonotopes are a widely used representation, but continuously incorporating new measurements grows their order unboundedly, so monitors must periodically apply an over-approximating reduction. The choice of the reduction method substantially affects the zonotope's precision, yet existing approaches typically utilize a fixed method throughout the run, even though the optimal choice depends on the current state. This paper presents a Predictive Zonotope Reduction (PZR) approach, which frames reducer selection as an optimal control problem and solves it using beam-search model predictive control. Policy distillation into a small neural policy further provides substantially higher execution speed than model predictive control while maintaining improved performance, enabling uncertainty-aware runtime monitoring on resource-constrained real-time systems. We implement our approach in the RLola runtime monitoring framework and evaluate it on a 5-degree-of-freedom robotic arm simulated in MuJoCo, with sensor uncertainty modeled according to ISO 5725. Experiments on a Raspberry Pi 5 show that dynamic reduction significantly lowers false-positive rates in monitoring compared with static reduction strategies.

0.19

Cognitive behavior emerging in mechanical systems through reservoir encoding and active inference

cs.CE ·2026-09-19 ·Matteo Torzoni, Domenico Maisto, Andrea Manzoni, Francesco Donnarumma, Giovanni Pezzulo +1 more
similarity 0.51
Abstract

Mechanical systems are traditionally designed as passive assets, where sensing, analysis, and control are treated as decoupled and externally prescribed processes. Reliance on predefined mechanistic models and supervised learning with offline optimization further limits their adaptability in changing environments. Drawing inspiration from biological cognition, we introduce a computational framework enabling mechanical systems to learn, adapt, and make decisions through interactions with partially observable environments. Perception, action, and learning are integrated through active inference within a perception-action loop. Sensor data are assimilated through a neural reservoir to support continual belief updating, while actions actively probe and influence the physical system, becoming an integral part of the inference process. Through self-directed interaction, adaptive behavior emerges from the continual refinement of internal representations to explain varying observation patterns while pursuing mechanical objectives. Across simulated case studies involving multiple mechanical systems, static and dynamic sensing, and objectives ranging from deformation maximization to vibration mitigation, we demonstrate the potential of the proposed framework as enabling paradigm for autonomous mechanical systems.

0.29