CS Paper Radar

Action Representation for Spatial Generalization in Robot World Models

Yuhang Sun

cs.RO ·submitted 2026-11-09 04:45 UTC · v1
benchmark

Abstract

Spatial generalization in robot world models depends on whether action representations capture the physical relationships that remain valid across changing spatial configurations. Yet different coordinates can describe the same interaction, whereas similar motions can produce different outcomes when local physical conditions change. How these distinctions affect learned prediction remains insufficiently understood. This study evaluates matched action representations defined in world, object, and surface coordinate frames using a controlled robotic peeling benchmark. Global pose and contact relocation experiments reveal a cost associated with limited training data when equivalent interactions receive different spatial descriptions. Removing information about peel thickness creates an irreducible ambiguity because identical predictive inputs can correspond to different material removal outcomes. Coordinates defined relative to the surface improve consequence prediction and counterfactual action selection under accurate local observations, but learned predictors remain vulnerable to uncertainty in the coordinate frame. Joint centering of the surface and tool removes sensitivity to translation of their common origin, whereas incorrect contact geometry and actual execution deviations introduce different failure mechanisms. These results show that effective spatial generalization depends on preserving the relationships between actions and states that determine physical consequences, rather than simply minimizing coordinate variation. This perspective provides a principled basis for designing robot world models that reuse physical knowledge across spatial configurations while retaining the distinctions essential to prediction and planning.

Closest papers

Nearest neighbours by meaning across the whole index.

Alignment Drives Reuse: Learning Generalizable Robot-Use Agents from Heterogeneous Experience

cs.RO ·2026-11-19 ·Ziyue Wang, Yaopeng Yang, Liyi Zhou
similarity 0.68
Abstract

Vision-language models (VLMs) demonstrate broad generalization across tasks and domains. However, comparable generalization in robot manipulation remains challenging. Heterogeneity in robot embodiments, task formulations, geometric conventions, and action interfaces fragments interaction experience across benchmarks and hardware. We rethink robot skill learning through alignment: Can heterogeneous interactions across benchmarks and embodiments jointly improve one shared skillset for robot manipulation? We propose UniCraft, a framework for learning robot manipulation skills by aligning heterogeneous settings. Specifically, UniCraft represents observed scene geometry using consistent coordinate conventions and aligns sensing and control interfaces across robots. It organizes tasks from different benchmarks in a canonical format, allowing interaction feedback to jointly refine shared skills and the orchestration policy that guides their selection and composition, without any demonstrations or model weight updates. We interleave tasks from 3 benchmarks and 6 embodiments, collecting 2,700 learning rollouts per agent model. During training, UniCraft improves pooled task success on unseen scenarios and tasks by 9-28 percentage points on LIBERO-PRO, 10.8-13.3 on RoboTwin 2.0, and 3.1-14.4 on RoboCasa365 (Epochs 1-3). After training, with the learned skills frozen, UniCraft demonstrates zero-shot transfer across 4 new robot embodiments and 5 additional agent models on robosuite and RoboDojo.

0.17

ComManip: Overfitting Manipulation Policies to Comfortable Regions

cs.RO ·2026-09-29 ·Yidan Lai, Xinyi Chen, Shuquan Man, Huiping Zhuang
similarity 0.68
Abstract

Training robot manipulation policies relies on costly robot demonstrations, making large-scale data collection impractical. Meanwhile, to improve policy generalization, existing approaches seek greater diversity in visual observations by varying object placements, viewpoints, and robot configurations during data collection. However, under a limited demonstration budget, this strategy forces the policy to model diverse visual observations, providing insufficient supervision to learn reliable observation-action correspondences under similar local conditions. Our study reveals that policies trained under this strategy achieve lower task success rates than those trained within a compact, visually and kinematically stable region. We refer to these stable regions as comfortable manipulation regions. To exploit this finding, we propose ComManip, a learning paradigm that specializes manipulation policies to comfortable manipulation regions. During inference, ComManip repositions the mobile base until the detected target center enters the familiar image-space range estimated from comfortable-region demonstrations. It then executes the same manipulation policy, enabling effective manipulation across diverse target locations. We conduct extensive experiments across multiple manipulation tasks, demonstration budgets, and policy families including ACT, $π_{0.5}$, RDT, OpenVLA-OFT, and SmolVLA. The results demonstrate that ComManip improves task success by roughly 20 percentage points or more across different policy architectures in large workspaces under limited demonstration budgets, suggesting that specializing manipulation policies to comfortable regions provides a more data-efficient learning paradigm for manipulation.

0.19

On the Utility of Pre-Trained Visual Representations for Policy Learning of Contact-Rich Insertion Tasks

cs.RO ·2026-11-13 ·Leon Kim, Dinesh Jayaraman, Michael Posa
similarity 0.68
Abstract

Visuomotor imitation learning has become a predominant paradigm for real-world robotic manipulation, yet it remains data-inefficient and brittle to task-irrelevant visual shifts. Pre-trained visual representations promise to ease this burden by distilling priors from internet-scale data, but the ``right'' representation for robotics remains unresolved: existing studies span broad but sparse task distributions and reach conclusions that vary and even conflict, pointing to strong task and setting dependence. We examine this question by bringing a magnifying glass to a common contact-rich manipulation task: insertion. We compare representations from widely used vision foundation models against an explicit contact-centric representation on two closely related insertion tasks, perturb each along controlled axes of occlusion and physical tolerance, and test whether conclusions transfer to the real world. Task dependence proves to be more subtle than previous, broadly scoped evaluations revealed: the best representation differs even between our near-identical tasks, and small changes shift trends in unpredictable ways. Despite this variability, results across simulation and real-world experiments demonstrate the distinct value of spatially-grounded, and in particular, contact-centric information for contact-rich policy learning, while underscoring how difficult it is to estimate such cues reliably under realistic visual complexity and sensor noise. We hope these findings motivate further study of representations in contact-rich manipulation, along with advances in contact perception and its integration into visuomotor policy learning.

0.09

DexForesight: Grounding Dexterous Policies with Implicit Spatial Foresight

cs.RO ·2026-11-08 ·Zhongxi Chen, Yi Yang, Xinyi Chen, Mingzhe Ye, Yaping Li +4 more
code/datacommunity pick similarity 0.67
Abstract · 13 pages, 4 figures

Dexterous manipulation requires rich spatial foresight over both the surrounding scene and the robot hand. Existing world-action models often acquire such predictive knowledge through explicit future prediction. We introduce DexForesight, a framework that learns spatial foresight implicitly by injecting dynamics-aware world representations into the latent space of a dexterous policy. During training, DexForesight learns an action-conditioned spatial world model from offline scene depth, kinematic hand geometry, and demonstration trajectories. The world model predicts 3D hand-point motion and visual feature changes, capturing both articulated hand dynamics and scene changes under demonstrated actions, including the motion of fingers occluded from the cameras. We then freeze the world model and align policy queries with its predictive world queries, transferring the learned spatial dynamics into policy latents and using them to condition action generation. At deployment, only the policy is retained, operating on RGB observations, language, and robot state without depth input or explicit future prediction. On 11 DexJoCo simulation tasks, DexForesight improves the overall success rate of the base policy from 49.4% to 60.5%. On three real-robot dexterous manipulation tasks, DexForesight achieves 58.3% success, compared with 50.0% for the strongest baseline. Project page https://dexforesight.github.io/

0.21

PointWAM: 3D World Action Modeling for Dexterous Robotic Manipulation

cs.RO cs.CV ·2026-10-02 ·Chunghyun Park, Beomjun Kim, Seungcheol Park, Heeseung Kwon, Yashu Shukla +3 more
code/data similarity 0.67
Abstract · Preprint. Project page: https://chrockey.github.io/PointWAM

World action models jointly learn to forecast world dynamics and predict robot actions, such that the learned internal world dynamics guide accurate actions. Existing approaches typically represent the world as RGB frames or latent counterparts while predicting actions as end-effector poses or joint angles, but they often struggle to capture the 3D spatial structure and contact geometry central to dexterous manipulation. We introduce Point World Action Model (PointWAM), a 3D world action model that decomposes the world into a scene (i.e., environment) and hands (i.e., actor), and jointly forecasts both as 3D point trajectories within a shared space-time coordinate frame. This explicit, disentangled representation enables effective pre-training on large-scale human demonstration videos without requiring any task-specific object or keypoint selection. Given a colored point cloud and a language instruction, PointWAM predicts how the scene and hands co-evolve in 3D space over time, then retargets the forecast hand motion to robot actions. Pre-training on human videos improves average DexJoCo success by 56.9 percentage points, and scene-trajectory supervision adds 10.9 points over forecasting the hands alone. With both, PointWAM surpasses the prior state of the art on ten DexJoCo tasks by 11.7 points and outperforms strong VLAs on a real robot.

0.50

GeoMind: A Benchmark for Spatial Understanding in Robotic Manipulation

cs.RO cs.AI ·2026-11-09 ·Jinghe Wang, Xinrui Cao, Duo Wu, Chenghao Gu, Yong Zhong +3 more
benchmarkcode/data similarity 0.67
Abstract

Robotic manipulation has advanced rapidly in mapping visual observations and language instructions to actions. However, reliable manipulation in open-world environments requires robust spatial understanding: the ability to identify targets in complex layouts (spatial reasoning) and adapt to scenes that continuously evolve through interaction (spatial memory). Yet existing embodied benchmarks fall short in evaluating spatial understanding: they often introduce strong visual cues that bypass spatial reasoning, and focus on static scenes that offer little insight into an agent's capacity for spatial memory. To address this gap, we introduce GeoMind, a systematic benchmark for structured spatial understanding through tabletop manipulation. GeoMind comprises 54 evaluated task variants organized around spatial reasoning and spatial memory. It also incorporates a scalable pipeline that automates the generation and annotation of task instances with verified targets and executable interactions. Extensive evaluations across diverse embodied agents reveal their consistent weaknesses in spatial understanding. Our findings highlight that these agents struggle to track identities after spatial changes and convert relational or geometric constraints into executable actions. We release the GeoMind benchmark at https://github.com/Notfound-JH/GEOMIND-benchmark.git.

0.18

Relational Spatial Alignment for Vision-Language-Action Models

cs.RO ·2026-10-17 ·Chaoran Zhu, Hengyi Wang, Chenglin Cui, Yazhe Wan, Taein Kwon +1 more
benchmark similarity 0.67
Abstract

Spatial understanding is essential for robots to perceive their surrounding environments and execute actions. Existing approaches typically encode 3D awareness into vision-language-action (VLA) models by directly aligning their representations with pre-trained 3D foundation models. However, we observe that such direct geometric feature alignment essentially exploits 3D foundation priors as a form of low-rank regularization in the feature space, resulting in severe rank collapse of the pre-trained VLA representations. In contrast, we shift the focus from enforcing point-wise equality to aligning pair-wise relationships. We propose a representation-alignment method that enables the injection of 3D spatial awareness without compromising the model's original expressivity. Extensive experiments on public benchmarks, our new spatial reasoning benchmark, and real-world manipulation scenarios demonstrate that our approach effectively incorporates 3D spatial representations into VLA reasoning, achieving robust performance and enhanced spatial awareness across diverse manipulation tasks.

0.16

PointPilot: Unified Robotic Manipulation via Object-Centric 3D Point Flow Prediction

cs.RO ·2026-11-02 ·Yihan Fang, Yuxin Tian, Ruixiang Wang, Zhanqi Zhang, Xing Hu +5 more
similarity 0.66
Abstract

Generalization remains a central challenge in robotics, calling for policies that address domain variations from multiple dimensions such as diverse embodiments, camera poses, and/or scene layouts. In order to approach this problem, we introduce PointPilot, a task-focused and 3D aligned manipulation framework built on a 3D space point-flow prediction. Rather than modeling the global scene, PointPilot only represents task-focused objects (robot grippers treated as objects), avoiding the prediction of potentially redundant scene parts unrelated to the manipulation tasks. Moreover, PointPilot aligns 3D spatial representation in one unified coordinate and supports closed-loop and fully automatic action execution across different manipulation modes from object point flow without a separately trained action expert, while existing works typically need an extra action head or are (semi-)automatic and single-arm mode specific. Given sensor observations and language instructions, our model jointly learns subtask planning, task-relevant object grounding, and 3D point flow prediction in an end-to-end way. By processing heterogeneous data in a shared 3D point flow space, PointPilot is able to absorb demonstrations from different embodiments. Extensive simulative and real world experiments validate our method. Notably, we demonstrate zero-shot embodiment generalization with PointPilot. A single trained policy can be deployed on previously unseen embodiments and successfully complete manipulation tasks without any additional fine-tuning.

0.16