CS Paper Radar

SimpFlow: Transferable Pretraining for Fluid Dynamics via Simplified Physics

Ruijie Li, Tianbai Xiao

cs.CE ·submitted 2026-11-09 12:06 UTC · v1
benchmark

Abstract

Neural surrogates enable rapid fluid simulation, but learning across diverse three-dimensional (3D) geometries requires costly computational fluid dynamics (CFD) labels. We introduce SimpFlow, a pretraining approach that generates supervision from simplified physics on unlabeled geometry libraries. A source-panel potential-flow solver generates velocity and pressure fields for approximately 9,000 3D geometries, capturing geometry-induced acceleration, stagnation, and suction while omitting viscosity and separated wakes. The solver imports only a surface mesh and reuses precomputed velocity fields across inflow directions, enabling inexpensive label generation. In our benchmark, amortized labeling takes 0.111 s per example using four CPU threads. We pretrain a neural surrogate on these labels and fine-tune it on independent CFD datasets. Across five flow tasks, SimpFlow improves over training from scratch in all 24 task-budget settings. With fine-tuning fixed at 200 epochs, interpolation indicates that SimpFlow requires 35-68% fewer CFD training cases to match the error of scratch models trained at each task's largest data budget. These results demonstrate that simplified physical solutions can provide transferable supervision, offering a practical way to reduce the high-fidelity data requirements of fluid surrogates.

Comment
29 pages, 20 figures, 19 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Domain Pretraining for Steady-State Neural CFD Surrogates

cs.LG ·2026-10-07 ·Anthony Zhou, Amir Barati Farimani, Shirley Ho, Rudy Morel
dataset similarity 0.78
Abstract · 43 pages, 25 figures

Neural surrogates for computational fluid dynamics (CFD) have the potential to greatly enhance engineering innovation through accelerating simulation. However, the primary limitation for neural surrogates is the lack of generalization to geometries and applications beyond the training set, which is significant given the diversity of engineering scenarios. Currently, this is addressed by generating a new dataset for a specific application; however, this requires running costly numerical solvers. In this work, we take a step toward addressing this by studying neural surrogates trained across different geometries, boundary conditions, and fidelities. We find that cross-domain pretraining improves zero- and few-shot performance on held-out datasets relative to both training from scratch and transferring from domain-specific experts. In particular, finetuning a pretrained, cross-domain model can achieve 2-3x lower errors at the same sample size and use 8x fewer samples to achieve the same error, compared to training from scratch. This benefit is architecture agnostic and improves with model size and pretraining dataset diversity. Furthermore, we study how and why cross-domain pretraining works in CFD surrogates, and find that simply pooling steady-state datasets is both sufficient and effective. Given the high cost of generating CFD data, leveraging existing datasets through cross-domain pretraining will likely be a valuable strategy as future surrogates expand to tackle new problems and use cases.

0.43

Measuring and Improving Transfer of Neural Surrogates for Vehicle Aerodynamics

cs.LG physics.flu-dyn ·2026-11-18 ·Favour Nerrise, Julian Busch, Gurpreet Singh Hora, Martin Sipka, Danielle C. Maddix +1 more
theory similarity 0.71
Abstract · 23 pages, 5 figures, 13 tables

Neural surrogates for external vehicle aerodynamics are fast alternatives to physics-based computational fluid dynamics (CFD) simulations. Their foundational limitation is a lack of zero-shot generalization across vehicle classes, which results in an expensive, custom training campaign for each new vehicle design. Similar to pretrained models in other fields, a pretrained surrogate should adapt to a new vehicle class using only a few simulations and stay accurate on its pretraining domain. No prior study has systematically tested this transfer behavior. We conduct a large-scale, controlled benchmarking study on five DrivAerML-pretrained surrogates across four independent target datasets. These datasets differ from the source in geometry, CFD solver, turbulence model, and flow conditions. We find that fine-tuning these surrogates outperforms training from scratch in fewer than half of the comparisons and lowers the accuracy of the surrogate on its source dataset. We introduce GeoReplay, a geometry- and gradient-aligned source replay that keeps source simulations resembling the target in training and applies their updates only when they agree with the target gradient. A risk bound separates geometric coverage from differences in the simulated physics, and we prove that every sufficiently small GeoReplay step decreases the target training objective. GeoReplay lowers the source error of fine-tuning in 77 of 80 settings and matches its target accuracy.

0.15

FG-ConvNO: A Geometry-Aware Neural Operator for Propeller CFD Prediction

cs.LG ·2026-10-24 ·Yichen Di, Valentin Duruisseaux, Di Zhou, Xinyi Li, Daniel Leibovici +2 more
publishedhot direction similarity 0.68
Abstract · 18 pages, 5 figures. Presented at the AAAI 2026 AI2ASE Workshop (non-archival)

Computational Fluid Dynamics (CFD) is essential in contemporary engineering design, yet it remains expensive to compute and can take thousands of CPU/GPU hours or more for a single high-fidelity simulation. Recent developments in machine learning for scientific modeling have led to powerful surrogate frameworks that can approximate flow fields and physical quantities by using a fraction of the computational cost. However, most of these methods require largescale homogeneous datasets or simple geometries, exhibiting severe generalization gaps when applied to complex and data-scarce configurations. To address this, we propose the Factorized Geometry Convolutional Neural Operator (FG-ConvNO) for robust geometry-aware propeller pressure prediction under limited training data. We introduce geometryaware encoding, efficient interpolation-based decoding, and auxiliary global quantity supervision. In addition, we incorporate DISCO blocks that use discrete continuous convolutions to make the model discretization agnostic. In our experiments, FG-ConvNO achieves the highest accuracy for both surface pressure and global thrust prediction on a procedurally generated propeller CFD dataset. Geometry-aware encoding and architectural simplification improve stability, while random vertex subsampling enhances robustness. Overall, adding geometric priors to grid-based convolutional operators reduces overfitting on complex propeller geometries and improves generalization in low-data regimes.

0.61

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.67
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.42

Rethinking How to Leverage Cheap Physics for Data-Efficient Neural Operators

cs.LG ·2026-11-06 ·Shuo Zhang, Senwei Liang
similarity 0.66
Abstract

Neural operators learn mappings from PDE inputs, such as initial conditions and coefficient fields, to the corresponding solutions. Once trained, they can rapidly predict solutions for new inputs. However, obtaining input-solution pairs for supervised training often requires expensive numerical simulations, whereas PDE inputs and governing equations provide inexpensive physical information. This raises a question: how can cheap physical information reduce the need for labeled solutions? A natural approach is to use physics to select inputs for labeling, but our acquisition experiments show no consistent advantage over random sampling. This observation motivates exploring an alternative: using cheap physics to improve neural operator initialization before supervised training. We propose Physics-Informed Initialization (PI-Init), a simple yet effective method that pretrains neural operators on unlabeled inputs using physics-informed losses and retains the learned parameters for supervised fine-tuning on the labeled dataset. A linearized analysis shows that pretraining can improve downstream prediction accuracy by reducing initialization errors that limited labeled data cannot effectively correct. Experiments across diverse PDE benchmarks and neural operator architectures demonstrate improvements in predictive accuracy, out-of-distribution generalization, and label efficiency. Representative results show error reductions of up to 62.7% at the same label budget and comparable or better accuracy with 90% fewer labels, relative to supervised-only training.

0.18

A Variational Optimal Transport Operator on Incompressible Flow

cs.LG cs.GR ·2026-09-12 ·Jinjin He, Shenyifan Lu, Sinan Wang, Zhiqi Li, Duowen Chen +1 more
similarity 0.66
Abstract

We present the Variational Incompressible Optimal Transport (VIOT) operator, a generative neural operator for amortized incompressible density transport. Given a new source-target density pair, VIOT predicts a divergence-free velocity field and generates the full transport trajectory by feed-forward inference, replacing the hour-scale per-pair optimization used by adjoint fluid solvers and differentiable simulation baselines. The system consists of three components: a stream-function or vector-potential representation that enforces incompressibility by construction, a regularized incompressible transport objective that balances endpoint accuracy and flow smoothness, and a Fourier Neural Operator backbone that amortizes the solve across new pairs and grid resolutions. Together, these components make incompressible transport a reusable neural operator that facilitates various transport processes. Further, the generative capability extends beyond the training distribution, with VIOT producing incompressible transports for user-drawn source-target pairs in a real-time interactive system. We demonstrate VIOT on 2D and 3D density-transport benchmarks. Both 2D and 3D rollouts complete in seconds per pair, while per-instance baselines in our 2D comparisons optimize each new pair from scratch and require on the order of an hour, a roughly $10^4\times$ online speedup.

0.22

Learnable composition for neural operators

cs.LG ·2026-09-02 ·Zituo Chen, Baiming Zhang, Sili Deng
similarity 0.66
Abstract

Neural operators are fast, differentiable surrogates for physical simulation, but their accuracy often degrades when domain geometry, size, or operating conditions differ from training. Supervised adaptation can recover accuracy, but even a small target set requires costly high-fidelity simulations. We therefore ask how pretraining and transfer can be designed together to reduce this deployment cost. LatentDDM first pretrains a neural operator to predict fields on small subdomains. For a new setting, it freezes this operator and trains only a lightweight module that composes the local predictions. We evaluate our method on two complementary problems: steady Darcy flow, where long-range pressure coupling must extend across increasingly large porous domains, and unsteady incompressible flow around a pitching airfoil, where rollout errors compound as target pitching frequencies exceed the training range. Compared with the capacity-matched models that process the full domain at once, LatentDDM's error is 36-56% lower on larger Darcy domains after adaptation with 16 target simulations. It also improves 20-step field rollouts in fast-pitching airfoil flow, both zero-shot and after few-shot calibration. These results identify the co-designed local pretraining and composition-level transfer as a promising design principle for physical foundation models.

0.28

Physical-Field-Bridged Material Parameter Inference from Multi-View Deformation Videos

cs.CV cs.RO ·2026-10-13 ·Linrui Shou, Jie Li, Yu Liu, Tao Huang
similarity 0.65
Abstract

Estimating simulation-ready material parameters from visual observations is crucial for deformable-object manipulation but challenging because material properties are only indirectly revealed through physical responses. We introduce physical-field-bridged material inference, a single-pass framework that uses dense physical responses to connect multi-view RGB deformation videos with constitutive-type classification and continuous parameter regression. Unlike inverse-physics methods requiring per-scene reconstruction, online tuning, or simulation-in-the-loop optimization, our model predicts force/contact masks, projected motion-flow fields, and projected stress-response maps, then conditions material inference on these fields to reduce reliance on appearance or category shortcuts. We construct DeformFieldBench, a 3DGS MPM learning environment comprising 5,000 simulations across 100 object shapes and five mechanically informative loading modes, with dense pixel-aligned physical supervision. Our method achieves the best median errors on all four continuous parameters, improves stress-hotspot recall from 0.0762 to 0.5121, and attains 0.8676 SSIM/36.82 dB PSNR in same-simulator replay on unseen objects. Under a protocol-matched GSO evaluation, inference and future-state prediction take approximately 30 seconds, compared with 15-120 minutes for per-scene optimization. The method also yields measurable replay agreement on five real-world sequences. These results support dense physical fields as an effective bridge for fast material inference, while cross-simulator and real-world tests reveal remaining domain and identifiability gaps.

0.10