CS Paper Radar

Generative Learning on Manifolds for Probabilistic Seismic Performance Assessment and Structural Identifiability

Dimitris G Giovanis, Ioannis G Kevrekidis, Roger G Ghanem

cs.LG physics.geo-phphysics.data-anstat.ML ·submitted 2026-10-21 03:12 UTC · v1

Abstract

Seismic performance assessment relies on computationally expensive nonlinear simulations, limiting uncertainty quantification and inference of structural properties from observed responses. We develop a manifold-based generative framework that learns the joint distribution of uncertain structural parameters and seismic-response trajectories from limited high-fidelity simulations. Combining Diffusion Maps, score-based Diffusion Modeling, and Geometric Harmonics, the framework enables both forward probabilistic prediction and inverse inference. Applied to a nine-story steel moment-resisting frame, the results reveal which structural properties are identifiable from seismic performance and how uncertainty in these properties influences response. In particular, the learned representation captures post-capping degradation characteristics more effectively than individual strength parameters. Inverse inference identifies distinct structural configurations that produce similar seismic performance, with representative solutions independently validated using nonlinear simulations. These findings demonstrate how generative learning can support uncertainty-aware seismic assessment while revealing structural non-identifiability and alternative mechanisms underlying observed performance

Closest papers

Nearest neighbours by meaning across the whole index.

Structure-aware Bayesian full waveform inversion via diffusion-regularized Stein variational gradient descent

cs.LG stat.MLphysics.geo-ph ·2026-10-13 ·Chao Li, Mrinal K. Sen, Sergey Fomel, Yangkang Chen
similarity 0.68
Abstract

Full waveform inversion (FWI) is a powerful tool for high-resolution subsurface model reconstruction, but it remains highly nonlinear and ill-posed, especially when the initial model is inaccurate or the acquired data are noisy and incomplete. Annealed Stein variational gradient descent (ASVGD) provides a particle-based Bayesian framework for FWI by approximating the posterior distribution with an ensemble of velocity models, thereby enabling uncertainty quantification beyond a single deterministic solution. However, conventional ASVGD-FWI commonly relies on simple handcrafted priors, such as Gaussian or smoothing assumptions, which are often insufficient to represent complex geological structures. To address this limitation, we introduce a learned diffusion model (DM) as an implicit regularization mechanism within the ASVGD-FWI framework. Instead of explicitly evaluating the diffusion prior density, the trained diffusion model acts as a learned geological projection operator that guides updated particles toward the distribution of plausible velocity models. In this way, the proposed method combines data consistency from FWI, posterior diversity from ASVGD, and structural realism from the diffusion prior. Numerical experiments demonstrate that the diffusion-regularized ASVGD-FWI produces more geologically consistent mean models, suppresses nonphysical artifacts, and yields uncertainty estimates that are more concentrated around structurally complex and poorly constrained regions. These results suggest that learned diffusion priors can effectively enhance Bayesian FWI by improving both inversion stability and the interpretability of posterior uncertainty.

0.03

Physical-State-Guided Diffusion Sampling for Full-Waveform Inversion

cs.LG ·2026-09-11 ·Chen Min, Haowen Jiang, Zheng Ma, Xiong-Bin Yan
similarity 0.66
Abstract · 47 pages, 13 figures

Full waveform inversion (FWI) reconstructs subsurface velocity models from seismic mea surements but faces the challenges of ill-posedness and nonlinearity, making accurate inversion dependent on suitable initialization and effective prior constraints. Classical methods stabi lize the inversion and improve convergence by designing hand-crafted regularization terms, yet these terms provide limited descriptions of complex geological structures. Recent diffusion based methods learn more detailed structural priors from data and integrate them into inverse problem solvers. We propose Physical-State-Guided Diffusion Sampling (PSG), which decouples diffusion posterior sampling into two mutually interacting processes: regularized FWI optimiza tion and conditional diffusion sampling with linear guidance. PSG shows overall improvements in reconstruction accuracy, preservation of prior structure, and robustness over classical and diffusion-based baselines across diverse OpenFWI inversion scenarios. Through domain decom position, PSG can generalize without retraining to more complex, realistic velocity fields with structural patterns distinct from those represented by the prior learned from training datasets and larger spatial domains than the training models. Overall, PSG offers a flexible framework for integrating learned priors with physical constraints, with potential for extension to other nonlinear inverse problems.

0.16

Depth-progressive 3D seismic velocity model building via 2D generative diffusion models

cs.AI physics.geo-ph ·2026-10-10 ·Shijun Cheng, Randy Harsuko, Mohammad H. Taufik, Tariq Alkhalifah
benchmark similarity 0.64
Abstract

Three-dimensional (3D) velocity model building (VMB) remains computationally challenging with conventional approaches and native 3D neural networks, largely due to the prohibitive memory and training cost of full 3D formulations. Therefore, we introduce a depth-progressive framework that achieves 3D VMB using 2D generative diffusion models through a depth-as-channel formulation, in which the depth dimension of each 3D velocity patch is mapped to the channel dimension of a 2D U-Net. This allows the model to synthesize overlapping depth patches sequentially from shallow to deep while conditioning the prediction of the deeper patch on the shallower one, as well as on any available geophysical constraints, including well logs and structural attributes. During training, paired shallow-deep patch pairs with randomized overlaps are used to teach the network how deeper velocity structures relate to shallower information, and a classifier-free guidance strategy enables the model to handle missing constraints gracefully. At inference, starting from a shallow velocity prior, the model recursively generates deeper patches in a top-down manner, and a depth-attenuated Gaussian blending scheme merges overlapping predictions into spatially coherent 3D volumes while accounting for the progressive accumulation of uncertainty at greater depths. Numerical experiments on both in-distribution benchmark models, including Overthrust, SEAM Arid, and SEG/EAGE, and the out-of-distribution Marmousi model demonstrate that the method effectively propagates shallow velocity priors downward and produces high-quality 3D velocity volumes across a range of geological settings and conditioning scenarios. Compared to a 3D benchmark of equivalent architecture, the proposed method significantly reduces parameter count, training cost, and inference cost, while maintaining superior VMB accuracy.

0.18

From Idle to Urgent: A Resource-Harvested HPC Workflow for High-Fidelity Seismic Estimation

cs.DC cs.CE ·2026-09-19 ·Tsuyoshi Ichimura, Kohei Fujita, Hideaki Ito, Wataru Sakurai, Muneo Hori +1 more
similarity 0.61
Abstract · 26 pages, 4 figures, accepted for Eighth Workshop on Interactive and Urgent High-Performance Computing

We propose an Urgent Interactive HPC workflow that dynamically integrates high-fidelity 3D nonlinear analysis with surrogate neural networks (NNs) to enable rapid decision-making during large-scale earthquakes. This approach achieves both "Resource Harvesting", which utilizes idle computing capacity during non-emergency periods, and immediate response during crises. By developing two specialized HPC kernels, the proposed method reduces energy-to-solution by 76% and improves throughput by 3.7-fold during normal operations to efficiently construct training datasets, while during emergencies, it couples NN-based inverse analysis with physics-based simulations and dynamic refinement to reduce conventional computational costs by over 97.9%, enabling the generation of highly reliable spatial time-history ground motion distributions within 30 minutes post-earthquake.

0.38

Generative adversarial networks with Monte Carlo dropout uncertainty quantification for structural health monitoring: Fibre Bragg grating data augmentation comparison in Hawk T1A aircraft

cs.LG eess.SP ·2026-10-15 ·Alvaro Peiro, Marios Impraimakis
publishedbenchmark similarity 0.61
Abstract · 18 pages; 18 figures, published paper

The signal generation capabilities of a novel data augmentation framework are examined in aerospace structures. First, the framework learns class-conditional temporal and spectral characteristics of the measured structural responses. It uses conditional generative adversarial network training and Monte Carlo dropout uncertainty quantification as a Bayesian approximation. This step enables stochastic signal synthesis and uncertainty quantification. Second, the generated responses are rigorously compared against experimental measurements across time, frequency, uncertainty, variability, and feature domains to assess physical realism, statistical consistency, and distributional fidelity. Finally, the synthetic data are evaluated to determine whether they should be incorporated into a supervised damage classification workflow. The framework is validated on the full-scale benchmark dataset from a BAE Systems Hawk T1A aircraft tested at the University of Sheffield's Structural Dynamics Laboratory for Verification and Validation. The test involves acceleration, fibre Bragg grating strain, and nonlinear dynamic response measurements. The results demonstrate that the model accurately captures dominant structural dynamics, it guides on signal use for classification improvement based on uncertainty characteristics, and it provides meaningful uncertainty estimates linked to signal complexity and excitation characteristics. Importantly, the framework offers a realistic generative modelling plan as a robust digital twin component for data-driven structural health monitoring, supporting resilient decision-making for condition assessment in safety-critical aerospace systems.

0.35

Learning structural response operators across varying geometries and loads with global and local geometry encoding

cs.CE ·2026-11-01 ·Xin Liu, Wuwen Yao
benchmark similarity 0.59
Abstract · 27 pages, 20 figures, 7 tables; v2: Removed the template footer; scientific content unchanged

Predicting mechanical responses across complex geometries and varying loading conditions is central to simulation-driven engineering, yet capturing the influence of geometric boundaries remains challenging for data-driven models. Here we propose a Load- and Geometry-adaptive Deep Operator Network (LG-DON) that integrates global geometric representations with local, boundary-aware information to predict structural responses. By distinguishing distances to different boundary categories rather than relying on the nearest boundary alone, the framework captures spatially varying geometric influences that conventional distance-based representations may overlook. Across benchmark problems involving diverse non-convex geometries, LG-DON reduces the mean relative L2 error from 12.17% for a modified MIONet baseline to 7.41%. Controlled ablation studies further demonstrate the advantages of category-resolved boundary distances and show that combining global and local geometric representations outperforms either representation alone in 15 of 18 evaluated configurations. These findings highlight the value of integrating complementary geometric information for accurate operator learning across complex structural domains.

0.34

Solving the Elastic Wave Equation with Physics-Informed Neural Networks: A Robust and Critical Assessment

cs.LG ·2026-09-07 ·Davide Staub, Ben Moseley
similarity 0.59
Abstract · Comments: 154 pages, 44 figures. Based on the Master's thesis of Davide Staub, ETH Zurich, March 2024. Original thesis: https://doi.org/10.3…

Physics-Informed Neural Networks (PINNs) have recently emerged as a promising approach for solving Partial Differential Equations (PDEs), offering a meshfree alternative that integrates physical principles into the learning process. This presents a new paradigm compared to traditional discretization methods and purely data-driven machine learning techniques. While promising, PINNs are not a panacea; they inherit challenges such as spectral bias and unstable convergence. Moreover, their potential in seismology remains largely unexplored. In this work, we provide a robust and critical assessment of PINNs for solving the elastic wave equation in seismology. We investigate the performance of PINNs on problems with varying degrees of complexity across various seismic sources and parameter models, from constant to highly heterogeneous settings. A pivotal aspect of our work involves investigating whether embedding physical principles directly into the network architecture enhances convergence and accuracy. We test an extensive range of neural architecture designs, from unrestricted, uninformed PINNs to highly specialized ones. We find that integrating an understanding of wave physics into the network design significantly improves accuracy. For instance, introducing a custom wavelet or plane wave layer, coupled with encoder and decoder layers, consistently yields a relative $L_2$ error approximately half that of the standard PINN, as evidenced across numerous experiments. We further demonstrate that this novel architecture enhances accuracy when applied to the acoustic wave equation, underlying the versatility of our network. Another key contribution of our research is the successful conditioning of PINNs on seismic source locations. This signifies a considerable advancement towards rapid seismic hazard detection and seismic analysis.

0.51

Livin' on a Prior: Likelihood Score Approximation for Inverse Problems

cs.LG ·2026-09-28 ·Rostislav Makarov, Tal Peer, Danilo de Oliveira, Timo Gerkmann
benchmarkhot direction similarity 0.59
Abstract

Generative models have found great success as data-driven methods of solving inverse problems. Two popular approaches work either by combining a pretrained generative prior with a known degradation model, or by training a conditional generative model directly from paired data. We target a setting that spans both regimes: unknown degradations can be learned from few paired examples, while known degradations can be learned from self-generated samples. We introduce Likelihood Score Approximation (LSA), a generative framework that keeps a pretrained unconditional model fixed and learns an observation-conditioned model that approximates the likelihood score from paired samples. Within a conditional stochastic-interpolant framework, LSA can be trained in either score or velocity coordinates, independently of the unconditional model's native parameterization, and supports both deterministic and stochastic sampling. We further show empirically that the prior model can be swapped post-training while keeping the same LSA model. Across speech and image inverse problems, LSA operates effectively even at roughly 0.01% of the full training dataset. On the ImageNet-256 benchmark it achieves competitive or better restoration quality than strong posterior-sampling baselines while requiring up to several orders of magnitude fewer network evaluations.

0.29