CS Paper Radar

Uncovering the Blind Spots of OKS-mAP: A Unified Protocol for Occlusion, Joint-Angle, and Temporal Evaluation of 2D Pose Estimators

Yifan Fan

cs.CV ·submitted 2026-10-22 11:17 UTC · v1
code/data

Abstract

The dominant metric for 2D human pose estimation, OKS-mAP, has three blind spots: it does not distinguish visible from occluded keypoints, does not measure joint-angle error, and is silent on the temporal stability of tracking-free per-frame inference. We propose a supplementary protocol with three modules: (M1) OKS-mAP stratified by ground-truth visibility, with Delta_occ = mAP(v=1) - mAP(full), quantifying how much the aggregate metric masks occlusion-specific differences; (M2) joint-angle error (RMSE/MAE/P95) plus knee-valgus detection consistency; (M3) frame-to-frame displacement, median-filter residual jitter, and jump rate, before and after OneEuro smoothing. We ran it on four datasets (COCO val2017, CrowdPose, OCHuman, PoseTrack18) and four models from two architecture families (YOLO11s-pose, an occlusion-domain fine-tuned variant, ViTPose-B/L), under a common detector-free oracle protocol and an open-source harness. Delta_occ is negative in every combination (-0.19 to -0.47): aggregate mAP overestimates occluded-scene performance in every tested combination. Joint-angle error is amplified in occluded layers; angle metrics reveal differences mAP cannot localize, e.g., the smaller occlusion-trained model significantly outperforming a larger transformer in occluded elbows. On PoseTrack18 val, raw jitter matched between the two YOLO models; pixel-domain OneEuro smoothing cut jump rates 9-10% at no matched-scope AP cost; residual jitter persists after detector removal; the transformer pair's jump rate is significantly lower; smoothing benefits replicate across architectures. Stratified mAP tracks full mAP closely (sign-consistency 1.0, 12/12), serving magnitude diagnosis rather than re-ranking; angle-metric difference vectors (especially knee) partially diverge, suggesting independent information. The protocol and harness are open-sourced, complementing rather than replacing OKS-mAP.

Comment
15 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

CJRR-Net: A Candidate-Joint Reprojection Ranking for Future-View Selection in Human Pose Estimation

cs.CV ·2026-11-10 ·Huiting Xi, Marsha Mariya Kappan, Eduardo Benitez Sandoval, Francisco Cruz
top venue similarity 0.66
Abstract · 10pages, 4 figures, 4 tables. Accepted for oral presentation at the Australasian Conference on Robotics and Automation (ACRA 2026)

Multi-camera systems support performance recording, sports and human-movement analysis, where selecting an informative viewpoint is important for reliable human pose estimation. We propose the Candidate-Joint Reprojection Ranking Network (CJRR-Net) for future-view selection among eight calibrated cameras in MPI-INF-3DHP. The model combines current-view pose observations, camera configuration, and candidate-specific geometric features obtained by reprojecting the estimated 3D pose and its uncertainty into each candidate view. CJRR-Net achieves a selected-view 2D mean per-joint position error (MPJPE) of 105.18 pixels, compared with 114.64 pixels for the shared-input MLP and 117.56 pixels for adapted PoseErrNet. It also achieves the lowest mean error among the listed policies in each evaluated occlusion group. A blender rollout illustrates repeated camera selection. These findings support candidate-specific geometry for single-view selection in the evaluated fixed eight-camera setting.

0.35

Hand Visibility Detector: Per-Keypoint Visibility Estimation for Hands

cs.CV ·2026-08-12 ·Ryosei Hara, Masashi Hatano, Rintaro Yanagi, Atsushi Hashimoto, Takuma Yagi +1 more
code/data similarity 0.66
Abstract · Code: https://github.com/ryhara/hand_visibility_detector

Hand Pose Estimation (HPE) is a fundamental technology for various applications such as AR/VR and robotics. In these applications, the visibility of each hand joint in the image is crucial for assessing the reliability of estimation results under occlusion. However, most existing HPE methods output joint positions without explicitly indicating their visibility. Although some methods account for occlusion or visibility, visibility estimation has mainly been used as an auxiliary signal for improving pose estimation. To our knowledge, per-joint hand visibility estimation has not been systematically studied as a standalone task. In this work, we propose Hand Visibility Detector, a model for estimating the visibility of individual hand joints, and present the first systematic investigation of visibility estimation as an independent task. We show that leveraging the prior knowledge of HPE models pretrained on large-scale data as a backbone yields high performance in this task. We further demonstrate the utility of Hand Visibility Detector on a downstream task of 3D hand pose annotation via multi-view triangulation of 2D keypoints, showing that visibility-weighted triangulation reduces reprojection error. Our method is released as a ready-to-use package, and the code and demo are available at https://github.com/ryhara/hand_visibility_detector .

0.59

STA-TFM: Spatio-Temporal Aggregation Across Views TransForMer for Pose Estimation

cs.CV ·2026-09-21 ·Mena Kamel, Natalie Won, Amrut Sarangi, Sven Jager, Albert Pla Planas
publishedcode/data similarity 0.66
Abstract

Monocular 3D human pose estimation (HPE) remains challenging due to depth ambiguity, occlu- sions, and the need for temporal consistency. While multi-view methods provide superior accuracy over monocular approaches, they often require complex setups. We introduce STA-TFM, a transformer-based architecture that combines spatial and temporal information for multi-view pose estimation. The approach leverages DSTformer, a monocular feature extractor, to capture long-range pose dependencies within each view. A fusion transformer then aggregates information across views to produce coherent 3D estimates. To address training data scarcity, we use a data generation pipeline that transforms any existing 3D pose dataset into multi-view setups with controllable parameters. Experiments on various datasets demonstrate that STA-TFM outperforms existing camera-parameter-free multi-view methods. STA-TFM achieves 50.9% and 49.5% reductions in mean per joint position error (MPJPE) and mean per joint velocity error (MPJVE) on the DHP19 dataset. Furthermore, it achieves 6.7% and 7.7% respective reductions on HAA4D, and a 15.2% MPJPE reduction on TotalCapture. STA-TFM handles noisy and missing 2D inputs, supporting potential deployment in healthcare monitoring, athletic assessment, and immersive technologies. Code, training checkpoints, and data are available at https://zenodo.org/records/22832620.

0.37

Tracking the Unseen: An Occlusion-Robust Framework for Target Tracking Under Full and Long-Term Occlusion

cs.CV cs.AI ·2026-09-15 ·Mais Mohammed, Sharifa Mohammed, Hanan Awadh, Haneen Bamaas, Raghad Bawazeer +1 more
similarity 0.64
Abstract · 25 pages, 10 figures, 7 tables

Real-time multi-object tracking systems remain highly vulnerable to full and long-term occlusion, where targets temporarily or completely disappear from the camera's field of view. Conventional trackers may terminate trajectories prematurely, resulting in identity loss and reduced situational awareness in applications such as defense and surveillance. This work proposes an occlusion-robust target tracking framework that maintains target identity and trajectory continuity through the integration of YOLOv11n object detection, Kalman Filter motion prediction, and occlusion-aware appearance-based re-identification. The framework consists of three stages: object detection, position estimation during occlusion, and identity recovery after target reappearance. Six Re-Identification (Re-ID) architectures were evaluated within the same tracking framework under identical conditions, with the Occlusion-Aware Mask Network (OAMN) achieving the best overall performance and therefore selected for the final pipeline. The framework was benchmarked against OccluTrack on the public OVIS dataset, achieving relative improvements of 18.1 percent in Multiple Object Tracking Accuracy (MOTA) and 25.1 percent in Identity F1 Score (IDF1), while reducing identity switches by 12.8 percent. On a custom military dataset simulating surveillance and battlefield-like environments with long-term occlusion, the framework achieved a MOTA of 0.734 and an IDF1 of 0.729, corresponding to relative improvements of 14.2 percent and 5.8 percent over OccluTrack. The system demonstrated strong tracking continuity, robust identity preservation, and reliable trajectory estimation under challenging occlusion conditions, highlighting its effectiveness for defense-related surveillance applications requiring continuous target tracking during visibility loss.

0.21

OmniPoser: Flexible Human Motion Recovery in the Wild with Masked Flow Matching

cs.CV ·2026-10-14 ·Minghao Liu, Tutian Tang
top venuecode/data similarity 0.64
Abstract · Accepted as a poster at the European Conference on Computer Vision (ECCV) 2026

Recovering 3D human motion from sparse wearable sensors is challenging due to the inherent noise, occlusion, and instability of real-world tracking signals. Existing approaches are restricted to fixed sensor configurations and, when built on diffusion models, are computationally prohibitive for real-time deployment. We propose OmniPoser, a universal framework that recovers full-body SMPL motion from a flexible combination of heterogeneous inputs, such as 3D keypoints, sparse IMU rotations, head-mounted 6-DoF poses, or any subset thereof, within a single model. OmniPoser introduces a cross-modal masking mechanism paired with a Masked Conditioning Encoder, enabling one architecture to incorporate diverse sensor configurations through a masked design. A decoupled dual-stream generative backbone generates complete motion via Conditional Flow Matching, requiring only a single ODE integration step at inference. Across three settings and seven benchmarks, including in-the-wild Nymeria and Ego-Exo4D datasets, OmniPoser performs on par with state-of-the-art methods while running at over 700 FPS. The project page is available at https://jamesbridgewater51.github.io/omniposer-eccv/.

0.57

Impact of Patient Orientation in Single- and Multi-View Camera Environments for AI-based Rehabilitation Monitoring

cs.CV ·2026-09-28 ·Miriama Jánošová, Andreas Lang, Petra Budikova, Jan Sedmidubsky
dataset similarity 0.64
Abstract

Automated quality assessment of rehabilitation exercises relies heavily on accurate human pose estimation from video data. Although numerous RGB-based pose estimation methods have been proposed, the impact of camera placement on detecting clinically relevant movement errors remains insufficiently explored. To address this gap, we introduce REHAB26-ViewAngles, a dataset comprising correct and incorrect rehabilitation exercise executions captured from a wide range of camera angles. Furthermore, we propose a novel separability metric to quantify an algorithm's ability to distinguish between valid and faulty exercise repetitions. Using these tools, we analyze how various RGB-based pose-estimation strategies are suitable for exercise quality assessment under varying camera placements. In particular, we analyze single-camera 2D and 3D pose estimation and four multi-camera strategies: a combination of two orthogonal 2D views, 3D triangulation, weighted 3D fusion, and an AI-based pose-estimation transformer model specifically trained from two synchronized cameras. Our findings reveal that an optimally placed 2D camera can improve the separability by 16.9% over the commonly used 0° frontal view and frequently outperforms single-camera 3D estimation, while combining two views can further improve accuracy by up to 13.1%. These results offer practical guidance for deploying rehabilitation monitoring in both home and clinical settings.

0.09

Occlusion for Free: Detecting Occlusion from the Disagreement Between Two Monocular Distance Cues

cs.CV cs.AI ·2026-11-04 ·Chibueze Praise Onyenweaku, Toyibat Adele, Sikirulahi Opeyemi Abdulkareem, Obed Honour Eje
published similarity 0.63
Abstract · Accepted at the NeurIPS 2026 GlobalSouthAI Workshop

Knowing that a pedestrian is occluded is useful to a robot even when the detector cannot recover the hidden pixels, but occlusion estimators are normally trained on occlusion annotations that deployment settings rarely have. We show that occlusion can be read off two distance estimates a camera-only pipeline already computes. Apparent height is largely unchanged by occlusion, because the detected box still spans the whole person; monocular metric depth is pulled toward the occluder, because the nearest surface inside the box is what a depth map reports. Only their ordering matters, so no focal length, stature, or depth scale is needed, provided the depth model's error is close to a pure gain, a condition that can be checked without labels. The score detects heavy occlusion on KITTI with AUC 0.909 (0.888 over all annotated pedestrians, including those the detector misses), requires no training and no occlusion labels, and is not a proxy for range: within fixed distance bands it holds AUC 0.894-0.925 while true distance alone sits near chance. On synthetic CARLA scenes with measured visibility it reaches 0.819, against 0.644 for distance alone. We arrived here after measuring three standard architectural responses to occlusion, depth fusion, occlusion-simulating augmentation, and attention, none of which improved detection outside its training distribution in the configurations we tested, and after finding that a detector trained on German roads loses half its accuracy on self-annotated street scenes in Lagos, Nigeria. Signals that need no local annotation are worth more in settings that benchmarks do not represent.

0.27

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.63
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50