CS Paper Radar

Incorporating World Models in Decision Making for Next Best View Selection in Active Sensing

Nikita Sarawgi, Omey M. Manyar, Satyandra K. Gupta

cs.RO ·submitted 2026-11-09 20:56 UTC · v1

Abstract

Efficient robotic 3D reconstruction requires selecting views that contribute new surface measurements with few physical captures. Pretrained world models can guide this choice, but a predicted surface may not produce valid depth measurements under the operating conditions of the deployed sensor. We present a deployment adaptation methodology for next-best-view selection that learns a sensor-return adapter from limited local calibration data while keeping the pretrained predictor fixed. The adapter estimates measurement dropout over each predicted surface, allowing the selection method to favor views likely to fill gaps in the measured reconstruction. In a real-robot experiment with a structured-light sensor, the adapted method achieves higher measured surface coverage with 60% fewer captures than nominal selection. The adapted method recovers a surface region that the nominal method repeatedly targets but fails to measure. These results suggest that robots can reuse pretrained predictive models while adapting their decisions to local operating conditions in data-scarce environments.

Comment
Accepted to CoRL 2026 Workshop "Do Robots Need World Models?"

Closest papers

Nearest neighbours by meaning across the whole index.

Sensor-Layout-Agnostic Navigation via Geometric Observation Canonicalization

cs.RO ·2026-10-06 ·Welf Rehberg, Kostas Alexis
similarity 0.68
Abstract

Existing visual navigation policies are inherently bound to fixed camera configurations, creating a fundamental barrier to zero-shot deployment across heterogeneous robot sensor layouts. To overcome this limitation, we present an embodiment-informed navigation policy capable of generalizing across diverse depth sensor configurations on a specific aerial platform. Instead of implicitly learning spatial alignments, our approach explicitly unprojects depth measurements from arbitrary depth sensor payloads, varying in sensor count, mounting extrinsics, and intrinsics, into a shared robot-centric frame, stitching them into a unified spherical range image and a binary validity mask. This mask allows the downstream policy to explicitly distinguish covered space from unobserved blind spots. Trained via reinforcement learning with aggressive camera randomization, our policy generalizes zero-shot to unseen layouts featuring up to seven cameras, scaling success rates from 78% to 95% as total spatial sensing coverage increases. Finally, real-world flight trials on a physical quadrotor, conducted in an obstacle-filled corridor and an outdoor forest, validate the policy's zero-shot transfer across camera configurations and its resilience to sudden online sensor dropouts.

0.19

Receding-Horizon Next-Best-View Planning for Highly Occluded Target Perception

cs.RO ·2026-10-13 ·Ayse Gul Yildiz, Rekha Raja
similarity 0.68
Abstract · 9 pages, 10 figures, 4 tables

Robotic systems that must acquire information about a specific target often face severe occlusion from sur- rounding structures or from the target itself, such that a single camera viewpoint provides only partial information. Active perception must therefore select viewpoints that progressively reveal unobserved regions. However, conventional local next- best-view (NBV) methods typically select viewpoints according to their immediate utility, which can overlook views that provide limited information initially but enable more informative obser- vations from subsequent viewpoints. We formulated local target perception as a short-horizon sequential view-planning problem and proposed a Receding-Horizon Next-Best-View (RH-NBV) planner that evaluates candidate sequences of future viewpoints rather than isolated views. RH-NBV is evaluated on a UR5e manipulator with an eye-in-hand RGB-D camera in simulation as well as on physical robot against a gradient-based NBV planner, and random search, using a coffee mug and Stanford bunny under controlled occlusion and a tomato plant with natural self-occlusion. Under heavy occlusion, RH-NBV achieves substantially higher target information recovery, reaching 63.8% ROI coverage versus 34.2% and 85.5% occluded-surface recall versus 7.4% for the single-step NBV baselines on the most occluded mug configuration. A controlled horizon ablation shows that this improvement arises from multi-step reasoning rather than additional computation. RH-NBV provides the greatest benefit for strongly occluded targets, while myopic NBV remains competitive and substantially cheaper when visibility is less constrained.

0.14

Budget-aware Correspondence-driven View Selection for Real-time 3D Perception of Mobile Robots

cs.RO cs.CV ·2026-11-09 ·Vaishnav Ramesh, Jacob Carter, Shivali J. Patel, Sanjeev J. Koppal, Md Jahidul Islam
benchmark similarity 0.68
Abstract · 12 pages

3D visual perception and scene reconstruction are critical for autonomous robots and intelligent transportation, yet real-world deployments often generate long, redundant image sequences that hinder downstream processing. This report investigates BCVS (budget-aware correspondence-driven view sampling), a pose-free view selection algorithm that offers 22+ FPS on a CPU, enabling online filtering for efficient 3D perception by mobile robots. Unlike existing approaches that rely on full structure-from-motion (SfM) pipelines or camera pose estimation, BCVS employs a purely correspondence-based scoring strategy that prioritizes view novelty while maintaining sufficient overlap for geometric stability. Given a user-specified budget, BCVS iteratively selects the most distinct frames and suppresses near-duplicates, producing compact subsets that preserve connectivity and minimize reconstruction loss. Extensive experiments on benchmark show that BCVS outperforms CPU-friendly baselines at tight budgets and remains competitive as budgets scale. Field trials with large aerial and marine robotics data further validate its practicality and scalability: BCVS reduces redundancy up to 16% while sustaining robust SfM registration and high-quality 3D reconstructions.

0.24

Rethinking Learned Occupancy in Autonomous Active Mapping with Observation-Gated Filtering

cs.RO cs.CV ·2026-09-08 ·Jiahui Zhang, Bonian Han, Gongbo Liang, Yu Zhang
publishedbenchmark similarity 0.66
Abstract · Accepted to IROS 2026 Space Robotics Workshop (oral)

Autonomous 3D active mapping requires a space robot to choose where to sense while building the geometry needed for navigation. Learned occupancy completion extends spatial context beyond the current field of view, but one predicted map often serves two planning roles: it scores expected surface gain and constrains collision-free motion. Unsupported occupancy can therefore distort both where the robot looks and where it believes it can travel. We study this coupled interface in a controlled closed-loop benchmark by holding the active-mapping system fixed and varying only its planner-facing occupancy across observation-only, learned, oracle-corrected, and ground-truth conditions. Improving occupancy accuracy does not monotonically improve closed-loop coverage: across 25 starts, planning with ground-truth occupancy reaches 70% of the learned baseline's final coverage 12.7 steps earlier on average, while increasing final coverage by only 0.031. Guided by this diagnosis, we introduce an observation-gated filter that retains completion in insufficiently observed regions and suppresses predictions only after repeated frustum exposure without nearby RGB-D support. The filter improves both targeted failure-prone starts without retraining or ground truth. These results motivate online revision of planner-facing geometry during autonomous intervals between communication windows. The current study assumes benchmark RGB-D observations and sufficiently accurate pose estimates; planetary sensing conditions and accumulated localization drift remain to be evaluated.

0.26

Diagnosing and Dynamically Filtering Occupancy World Models for Active Mapping

cs.RO cs.CV ·2026-09-06 ·Jiahui Zhang, Gongbo Liang, Yu Zhang
published similarity 0.66
Abstract · Accepted by IEEE IROS 2026 Workshop on WORLDS: World Models and Spatial Intelligence for Physical AI

Active mapping requires a robot to select camera viewpoints that efficiently reconstruct an unknown 3D scene. To reason about unobserved regions, recent systems use pretrained occupancy networks as world models that complete missing geometry. The predicted structure contributes to expected coverage gain and constrains feasible robot motion. Consequently, occupancy errors can change both what the robot chooses to explore and where it is able to move. We diagnose these effects by holding the planner fixed and varying only the occupancy representation provided to it. We consider planning without completion, with learned occupancy, with false positives removed by a ground truth oracle, with false negatives restored by an oracle, and with ground truth occupancy. Our experiments show that correcting false positives or false negatives alone does not consistently improve final coverage. This finding reveals a gap between occupancy accuracy and downstream planning performance. Ground truth occupancy provides a much larger improvement in coverage efficiency than in endpoint coverage, suggesting that planning and reachability remain important bottlenecks even when the geometric world model is accurate. Based on these findings, we introduce a dynamic filtering strategy that preserves predictions in unexplored space while suppressing repeatedly unsupported occupancy using online observations. Preliminary examples show that this strategy can redirect viewpoint selection toward reachable surfaces that would otherwise remain unobserved.

0.34

OccamView: Object-Conditioned View Selection for Frame-Budgeted Active 3D Gaussian Reconstruction

cs.RO cs.CV ·2026-08-17 ·Hongbo Gao, Wei Zhang, Zeyu Ni, Dihao Zhu, Ruifeng Li +2 more
similarity 0.65
Abstract · The research method need to be further polished to keep pace with current research

Active 3D Gaussian reconstruction fundamentally relies on selecting informative next-best views under limited sensing budgets. Existing active 3DGS methods primarily plan viewpoints according to geometric information gain, treating object-induced hidden regions in the same manner as general unexplored space. Under tight frame budgets, such geometry-driven strategies may prioritize global scene coverage while leaving partially observed objects incompletely reconstructed. To address this limitation, we propose OccamView, an object-conditioned view-selection framework for frame-budgeted active 3D Gaussian reconstruction. Rather than predicting unseen object geometry or performing shape completion, OccamView maintains an online object memory from open-vocabulary detections grounded in measured RGB-D observations and represents unresolved local occupancy around detected objects as conservative hidden-region proxies. Candidate viewpoints are then evaluated using an occlusion-aware proxy-coverage score. Furthermore, we introduce a Geo-Floor mechanism that restricts object-conditioned re-ranking to geometrically competitive candidates, allowing object-conditioned cues to guide complementary observations while preserving the geometry-driven exploration behavior of the underlying planner. Experiments on Replica and Matterport3D under a unified frame-budgeted protocol show that OccamView consistently reduces Completion and improves Completion Ratio across five frame budgets, with particularly pronounced gains under limited frame budgets. These results demonstrate that lightweight object-conditioned cues effectively complement geometry-driven active view planning.

0.36

Low-Resolution Perception for Robotic Packing

cs.RO ·2026-08-26 ·Giuseppe Fabio Preziosa, Federico Vignoni, Chiara Castellano, Marco Faroni, Andrea Maria Zanchettin +1 more
published similarity 0.65
Abstract · 6 pages, 5 figures. Accepted to IFAC World Congress 2026

This work tackles the problem of scalable perception for robotic packing with low-cost, low-resolution depth sensing. We propose a framework where reconstruction cues drive next-view selection and grasp evidence updates a per-object stability estimate, jointly deciding what to acquire next and when to grasp. During the reconstruction, a low-resolution Next Best View (NBV) strategy explicitly avoids redundant views while preserving task-relevant geometry. We validate the approach in two steps: (i) an ablation study of the utility function under very low resolution, and (ii) a full end-to-end evaluation across policies, showing how low-resolution perception is a practical, scalable option for robotic packing.

0.35

LEAP-NBV: Lightweight Edge Active-Perception for Foundation-Model Next-Best-View Planning

cs.AI ·2026-09-21 ·Boxun Hu, Jiawei Ge, Axel Krieger, Peng Wang, Tinoosh Mohsenin
benchmark similarity 0.65
Abstract

Foundation models are endowing autonomous systems with greater intelligence, enabling a more comprehensive understanding of the environment through visual perception. A representative example is Human Mesh Recovery (HMR), which provides useful estimates of a target's 3D pose and shape that can benefit tactical missions. However, the size and power demands of such models make them difficult to run on edge platforms and limit their real-time performance, undermining the requirements of tactical edge deployment - especially for active perception, where a mobile robot must plan its next-best view on-board and cannot offload computation under contested communications. We present LEAP-NBV, a lightweight active-perception framework that runs foundation-model-driven Next-Best-View (NBV) planning on-board an edge device. To this end, we distill a family of large HMR teachers, each into a compact 32M student, with an offline mesh objective, then quantize the vision encoder to FP16 and characterize its on-device accuracy and latency. Within an occlusion-aware active perception loop, we evaluate all configurations on the same held-out benchmark and deploy the end-to-end pipeline on an NVIDIA Jetson Xavier NX, reporting measured on-device latency and energy. Distillation recovers 6-7 mm of Procrustes-aligned mean per-vertex position error (PA-MPVPE) over the undistilled student on the test set. Selecting the edge-optimal compression model brings the HMR engine to ~12 ms at a small accuracy cost and runs the full closed loop at 3.6 FPS and 2.6 J per frame, achieving a 2.0x speedup and 3.0x lower energy than the uncompressed model while nearly matching downstream task quality.

0.27