CS Paper Radar

RaMOD: Moving-Object Detection from Raw mmWave Radar Cubes under Ego Motion

Yuan Fang, Long Zhuang, Lingzi Xing, Xijia Wei, Jingqi Jiang, Fangzhan Shi, Simon Julier, Kevin Chetty

cs.RO cs.CV ·submitted 2026-11-09 21:36 UTC · v1

Abstract

Millimeter-wave (mmWave) radar provides weather-robust sensing and direct Doppler measurements, yet automotive perception pipelines often reduce its output to sparse point clouds or two-dimensional projections, leaving raw range-azimuth-Doppler (RAD) cubes underutilized. Ego motion induces Doppler responses from world-static structures, while Doppler wrapping aliases radial velocities, complicating moving-object detection and velocity estimation. We present RaMOD (Radar-based Moving-Object Detection), a real-time framework for moving-object detection and velocity estimation from raw RAD cubes acquired by a vehicle-mounted single-chip radar. RaMOD explicitly estimates frame-wise ego motion and uses the estimated radar translational velocity to predict the Doppler region of world-static structures and suppress returns within it. It temporally encodes the suppressed cubes into multi-scale features to predict RAD-space boxes with class labels. For each detected object, it predicts radial and forward velocities under raw-Doppler and Doppler-unwrapped hypotheses, together with Doppler-wrapping probabilities. On our BRIDGE-Liv dataset, RaMOD outperforms all compared raw-radar methods across RAD-cube, RA, and RD detection settings, achieving 80.8% cube mAP at IoU 0.30, 15.7 percentage points above the strongest RAD-cube baseline. Velocity MAE is 1.128 m/s, with 99.87% Doppler-wrapping accuracy.

Closest papers

Nearest neighbours by meaning across the whole index.

Do Spinning Radar Doppler Velocity Measurements Improve Vehicle Detection and Tracking?

cs.RO cs.CVeess.SP ·2026-09-17 ·Eric Xie, Daniil Lisus, Timothy D. Barfoot
similarity 0.73
Abstract · 8 pages, 8 figures

Spinning frequency-modulated continuous-wave (FMCW) radars have been gaining popularity in autonomous vehicle perception on account of their robustness to adverse weather conditions and 360° field of view. Recently, scanning radars have also been shown capable of generating per-azimuth Doppler velocity. In this paper, we investigate whether these Doppler velocity measurements improve spinning radar vehicle detection and tracking performance. For detection, we estimate the ego motion and use it to undo the Doppler range distortion of the radar image before passing it to a network. For tracking, we propose a new way to estimate a per-vehicle velocity and use it as a prior for the tracker's motion model. Since Doppler-enabled spinning radar data is not available in any dataset with ground-truth dynamic object labels, our first contribution is an automatic labelling pipeline that uses an ensemble of fine-tuned off-the-shelf lidar detectors to label all 643 km of the Boreas Road Trip dataset. We then transfer detections to radar, and use over 250 km of vehicle-dense sequences as ground-truth training data. By training and evaluating two state-of-the-art detectors, we show that Doppler undistortion can improve detection accuracy by up to $2.37$ points on mean average precision. Furthermore, we show that the Doppler velocity prior can improve tracking accuracy by $13.68$ points on multi-object tracking accuracy (MOTA) versus the zero-velocity initialization baseline, while achieving $99.7\%$ of the MOTA obtained using ground-truth velocities as the prior.

0.23

Doppler-aided Position-Velocity Tracking of Hidden Objects using mmWave Radar

cs.RO cs.CV ·2026-10-25 ·Yerin Cheon, Kush Garg, Akshat Dave
benchmark similarity 0.72
Abstract · 8 pages, 8 figures

Safe indoor operation requires autonomous tracking of objects that are not directly visible to the robot. Optical non-line-of-sight (NLoS) methods depend on ambient lighting and scene geometry or on weak multi-bounce returns that need long acquisitions. Millimeter-wave (mmWave) radar offers an attractive alternative: walls act as reflectors for mmWave signals, and frequency-modulated continuous-wave (FMCW) radars enable fast, practical measurement of range, angle, and velocity. However, the low resolution of these radars leads to spatially ambiguous observations. The Doppler information, although particularly sensitive to target motion, remains underexplored in indoor NLoS localization: existing methods emphasize spatial representations and either collapse or discard the Doppler dimension before learning. To leverage the complete Range-Azimuth-Doppler (RAD) information, we acquire the first indoor NLoS radar dataset that pairs sequential RAD measurements with synchronized position and velocity ground truth under controlled variations in motion: 576 sequences totaling 720,856 frames across 12 trajectories of a mobile robot moving along varying speeds, starting positions, and material configurations. We then formulate NLoS tracking as sequential position-velocity estimation rather than frame-wise localization: a shared 3-D encoder processes the full RAD representation of consecutive frames, separate recurrent branches estimate position and velocity, and post-inference refinement combines the two into a motion-consistent trajectory. Our method achieves 8.95cm position and 1.75cm/s velocity errors on held-out trajectories and generalizes to unseen scenarios involving a moving human target. Together, our dataset and tracker establish a benchmark for tracking hidden moving targets with a low-cost radar.

0.19

Stereo 4D Radar for 3D Object Detection: Integrating Geometric Alignment and Absolute Velocity Estimation

cs.CV ·2026-09-02 ·Seung-Hyun Song, Dong-Hee Paek, Woong-Chan Byun, Seung-Hyun Kong
similarity 0.71
Abstract

Four-dimensional (4D) Radar is a powerful sensing modality capable of detecting surrounding three-dimensional (3D) objects under diverse weather conditions and providing Doppler-based motion information. However, raw 4D Radar signals contain significant clutter from road surfaces, guardrails, and surrounding vehicles, along with multipath-induced ghost reflections and the receiver's inherent noise floor. Consequently, preprocessing algorithms designed to remove such invalid measurements often make the Radar data excessively sparse. Moreover, the Doppler measurements provided by 4D Radar describe only the radial component of an object's velocity, limiting their ability to recover the full motion state. In this paper, we introduce a stereo 4D Radar-based 3D object detection framework that exploits the geometric disparity between left and right Radars to estimate the absolute velocity of objects and achieve more robust perception through the fusion of their complementary features. The effectiveness of the proposed framework is validated on our in-house stereo 4D Radar dataset, demonstrating performance gains of 8.82 points in AP 3D and 9.0 points in AP BEV over state-of-the-art mono 4D Radar baselines. These results demonstrate that absolute velocity estimation combined with stereo geometry-aware feature fusion leads to substantial improvements in 3D object detection.

0.31

If It Moves, Radar Knows: A Physics-Aware Radar Transformer for Class-Agnostic Moving-Object Detection

cs.CV ·2026-09-02 ·Yinghao Sun, Shuguang Li, Jinliang Shao, Tieshan Li
code/data similarity 0.70
Abstract · 8 pages, 5 figures, 4 tables, submitted to 2027 ICRA

Detectors trained on closed-set annotations can miss rare moving objects outside the training taxonomy. Automotive radar provides category-independent Doppler motion cues and is less affected by adverse illumination and weather, but sparse, noisy returns hinder class-aware 3D box detection. Surface location and velocity remain useful for motion reasoning and collision avoidance when full box geometry is difficult to recover. We present the Physics-Aware Radar Transformer (PART), a fully sparse radar-only detector that predicts existence confidence, a representative surface point, and 2D ground-plane velocity for each moving-object hypothesis. Doppler-Aware Query Initialization (DAQI) replaces scene-independent learned queries with input-dependent proposals by clustering radar returns in position and velocity, easing query-object assignment in sparse scenes. Physics-Guided Cross-Attention (PGCA) incorporates radial-Doppler consistency and radar cross section (RCS) into query-point association. Uncertainty-aware supervision randomly masks ground-truth objects and assigns soft existence targets to ambiguous radar-supported queries, reducing reliance on exhaustive annotations. With only 1.1 million parameters, PART achieves a class-agnostic average precision (CA-AP) of 0.8827, a mean average surface translation error (mASTE) of 0.3188 m, and a mean average velocity error (mAVE) of 0.8084 m/s on nuScenes. It attains 0.9203 recall on rare and safety-relevant categories excluded from the standard evaluation and remains effective at night, in rain, and under severe occlusion. Inspection of apparent false positives shows that some predictions correspond to moving objects absent from the nuScenes annotations. Code and pretrained model weights will be publicly available at https://github.com/sunyinghao-uestc/PART.

0.37

4D Radar Perception Algorithms for Autonomous Driving: A Review

cs.RO cs.CVeess.SP ·2026-09-16 ·Xumin Wu, Jun Zhou, Jilin Mei, Chen Min, Yu Hu
similarity 0.69
Abstract · 12 pages, 9 figures, 5 tables. Submitted to IEEE Sensors Journal

Research on 4D millimeter-wave radar perception algorithms has flourished in recent years, extending from signal processing and object detection to semantic segmentation, motion estimation, occupancy prediction, and dynamic scene reconstruction. This review organizes the field according to the evolution of perception tasks and algorithms. It first introduces radar fundamentals, data representations, and quality-enhancement methods, and then reviews object-level perception, motion and localization, local and dense spatial perception, and dynamic scene understanding. Across these directions, we compare radar-only learning, multimodal fusion, and cross-modal supervision and knowledge distillation. Particular attention is paid to how elevation, Doppler measurements, and radar physical priors are exploited across tasks. We further summarize the task coverage, input data, annotations, and evaluation protocols of existing datasets, clarifying the empirical support for different research directions. Finally, we discuss the common challenges and future directions of 4D radar perception for autonomous driving. This review provides a task-oriented perspective on the transition from sparse object perception to dynamic spatial understanding.

0.18

Image Frame Dynamic Object Segmentation and Ego Motion Estimation using Radar Image Fusion

cs.CV cs.RO ·2026-09-19 ·Astik Srivastava, Suhani Grover, Avinash Sharma, Madhava Krishna
published similarity 0.66
Abstract · Accepted for presentation at IEEE IROS 2026 Workshop LTP

Dynamic object segmentation and ego-motion estimation are closely coupled problems in autonomous driving, as accurate ego-motion estimation typically requires static scene observations, while identifying static observations requires knowledge of the ego motion. We present Radar-Dot, a radar--RGB framework that exploits radar Doppler measurements to address this coupling. Radar returns are first used to estimate ego velocity through a linear Doppler constraint, with residual-based static/dynamic segmentation and robust estimation used to reduce the influence of moving objects. The estimated motion is then combined with metric depth and dense optical flow to identify image regions whose observed motion is inconsistent with the rigid scene motion. Experiments on 10 nuScenes scenes (part of nuscenes-mini) demonstrate that the resulting geometric pipeline achieves 20.24% dynamic IoU and 33.67% F1-score over 394 frame pairs, while radar-based static-point filtering improves ego-velocity estimation compared with using all radar returns. These results demonstrate the potential of radar as a modality for jointly improving ego-motion estimation and dynamic object segmentation.

0.31

Radar Panoptic Transformer: Semantic-Guided Mask Queries for Dynamic Scene Understanding

cs.CV cs.LG ·2026-11-15 ·Mayank Mayank, Bharanidhar Duraisamy, Rohit Mohan, Abhinav Valada
similarity 0.65
Abstract · 9 pages, 4 figures

Automotive radar provides long-range sensing and direct Doppler velocity measurements, but its sparse and non-uniformly sampled point clouds pose significant challenges for panoptic segmentation. Dynamic objects often yield only a few detections amid a dominant static background, providing limiting the geometric cues for separating object instances. We propose \emph{Radar Panoptic Transformer (RPT)}, an end-to-end point-based network that incorporates radar-adaptive feature extraction with semantic-guided mask prediction. Its backbone aggregates pose-aligned temporal context through grouped vector attention and learns per-point neighborhood radii conditioned on range, azimuth, and radar cross section (RCS). Point-wise semantic predictions initialize queries at likely foreground detections and guide masked cross-attention through query-point class agreement, producing instance masks without geometric clustering. An auxiliary RCS-consistency loss matches instance-level statistics between predicted and annotated instances. RPT achieves state-of-the-art performance on RadarScenes with $71.6\%$ mIoU and $82.2\%$ PQ. We further evaluate RPT on MAN TruckScenes, where it outperforms the evaluated baselines in a long-range, full-surround radar setting with sensing ranges up to $230\,\mathrm{m}$. RPT achieves real-time end-to-end inference at $31$\,Hz on RadarScenes, exceeding the sensor frame rate.

0.20

IMM-based Multiple Object Tracking using a State Prediction Neural Network

cs.RO cs.AI ·2026-09-10 ·Chan-Bin Lim, Dong-Hee Paek, Seung-Hyun Kong
similarity 0.65
Abstract · 8 pages, 4 figures

Object tracking is essential for autonomous vehicles to avoid obstacles and plan routes. Radar maintains detection performance even in adverse weather and can measure relative velocity through the Doppler effect, making it well suited for object tracking. In this paper, we propose a data-driven state PRedictor-based Interacting Multiple Model tracking method (PR-IMM) that improves nonlinear object-motion representation while preserving the stability and interpretability of physics-based motion models. The proposed method employs a transformer-based PRediction model (PR) that incorporates radar Doppler measurements to predict object displacement. The PR model is integrated into the IMM as a mode alongside the CV, CA, and CT motion models, and their prior positions are dynamically combined according to the mode probabilities. Experimental results show that PR-IMM reduces position-estimation error by 57.3% over the IMM and by 16.5% over the PR, while reducing ID switches by 25.3% and improving IDF1 by 9.6% over the IMM.

0.33