CS Paper Radar

Neural Network-Assisted CLEAN for Efficient Multipath Parameter Estimation in MIMO Systems

Chaofan Deng, Linyu Sun, Jaeho Lee, Zishen Wan, Arijit Raychowdhury

cs.LG ·submitted 2026-11-09 22:05 UTC · v1

Abstract

High-resolution multipath estimation in wideband multiple-input multiple-output (MIMO) channels requires repeated searches over angle of arrival, angle of departure, and propagation distance. This paper presents neural network-assisted CLEAN (NN-CLEAN), which replaces the multidimensional search at each extraction step with a multi-head classifier while retaining least-squares (LS) estimation of the complex path gain, parametric reconstruction, and residual cancellation. The same classifier is applied to successive residuals, allowing the extraction depth to vary without changing its output structure. With the number of iterations prescribed by the reference multipath-component (MPC) count, off-grid synthetic tests show that NN-CLEAN slightly exceeds grid-search CLEAN (GS-CLEAN) in path accuracy for one and two MPCs, although its accuracy declines more rapidly at larger path counts. For complete three-MPC extraction at a batch size of eight, NN-CLEAN achieves an approximately $27\times$ speedup and a $52$-fold reduction in peak GPU memory relative to GS-CLEAN. Applied without retraining to two-MPC line-of-sight (LOS) and non-line-of-sight (NLOS) Sionna ray-tracing channels within a coded MIMO link, NN-CLEAN substantially reduces channel-reconstruction mean-squared error (MSE) and bit error rate (BER) relative to interpolated LS channel estimation. GS-CLEAN retains an accuracy advantage on these channels, indicating the estimation cost associated with the computational savings.

Closest papers

Nearest neighbours by meaning across the whole index.

MPSi: Neural Extraction of Site-Specific Multipath Propagation Properties for Massive MIMO

eess.SP ·2026-11-07 ·Maryam Rezvani, Raviraj Adve, Amr El-Keyi, Akram bin Sediq
similarity 0.61
Abstract · Submitted to IEEE for possible publication

Accurate extraction of site-specific multipath propagation properties enables a wide range of wireless applications, including initial access, wideband channel reconstruction, and the generation of channel datasets for learning-based and continual-learning systems. Classical parametric channel-sounding algorithms such as RIMAX provide physically interpretable estimates, but their data-dependent model-order selection and iterative nonlinear refinement introduce substantial delay and computational cost. This paper proposes MPSi, a physics-guided neural framework that replaces these costly stages with a compact path-count network and a fixed-depth, deep-unfolded Levenberg-Marquardt refinement. MPSi estimates the complex gain, angle of arrival, and propagation delay of each multipath component while preserving the underlying physical channel model. We evaluate MPSi in two site-specific ray-traced environments, a small cell and a dense urban area, and show that it achieves initial-access and full-channel-estimation performance comparable to an enhanced RIMAX baseline while requiring significantly fewer optimization iterations. The reconstructed channels also yield bit-error-rate performance close to the perfect-channel knowledge reference. These results position MPSi as a promising low-overhead framework for extracting multipath propagation properties in massive-MIMO systems and for generating cell-specific channel pseudo-labels for training when direct ground-truth measurements are unavailable.

0.31

Consistency Learning and Distillation for One-Step MIMO-OFDM Channel Estimation

cs.LG eess.SP ·2026-11-04 ·Fredrik Nguyen, Qiwen Wang
similarity 0.53
Abstract · 6 pages, 3 figures, 4 tables

Iterative neural channel estimators can improve recovery under pilot contamination, but repeated network evaluations increase inference cost. This paper develops observation-anchored consistency and Consistency Mid-Training (CMT) estimators for one-step channel estimation in multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems. Both estimators refine pilot-derived least-squares channel estimates in the delay-beam domain. Consistency learning couples endpoint predictions along noisy-to-clean paths. CMT then refines a compact consistency-trained student to predict a flow-matching teacher's endpoint from intermediate trajectory states. Across the evaluated SNR range, the compact CMT student reduces uncoded symbol error rate (SER) by 9.6-20.2% relative to the one-step flow-matching baseline (0.44-0.98 dB in logarithmic SER reduction), while using 74.5% fewer parameters and 73.0% fewer network multiply-accumulates.

0.31

Low-Complexity Neural Pursuit for Line Spectral Estimation

eess.SP ·2026-09-19 ·Chenchen Liu, Wenjun Jiang, Xiaojun Yuan
top venuetheory similarity 0.52
Abstract

In this paper, we propose a high-precision yet low-complexity framework, termed Neural Pursuit for Line Spectral Estimation (NeuPLSE), for off-grid line spectral estimation from a single snapshot. The proposed framework systematically integrates model-driven signal structures with data-driven adaptability, enabling continuous-domain spectral representation together with adaptive parameter learning. Within this framework, model order detection and spectral parameter estimation are jointly achieved through residual analysis, with coordinated use of global and generalized component-wise residual information to ensure robust and accurate estimation performance. Moreover, NeuPLSE supports a unified extension from one-dimensional (1D) to multi-dimensional (MD) scenarios while maintaining low computational complexity. Extensive simulations in representative integrated sensing and communication (ISAC) scenarios demonstrate that NeuPLSE achieves accurate model order detection and high-precision spectral estimation. In sparse-path settings, it approaches the Cramér-Rao lower bound, while in dense-path settings, it attains competitive reconstruction performance with significantly lower computational complexity than state-of-the-art methods.

0.36

On the Impact of Site-Specific Training for a Real-World 5G NR System

cs.IT eess.SP ·2026-09-03 ·Reinhard Wiesmayr, Nuri Berke Baytekin, Chris Dick, Christoph Studer
publishedcode/data similarity 0.48
Abstract · This work has been accepted for presentation at the 60th Asilomar Conference on Signals, Systems, and Computers 2026

Site-specific training can improve wireless receiver performance without increasing computational complexity. However, real-world results have so far focused on fully trainable neural receivers and single-layer transmissions. We study site-specific finetuning of three receiver architectures: fully trainable neural, model-driven neural, and model-based. We train and evaluate these receivers using new measurements from a standard-compliant 5G NR testbed at ETH Zurich with dual-layer uplink transmission, including measurement campaigns conducted more than six months apart. Our results show that site-specific finetuning (i) substantially improves fully trainable and model-driven neural receivers, while resulting in only marginal gains for the less tunable model-based receiver; (ii) enables a single neural receiver jointly finetuned for single- and dual-layer transmission to closely match receivers finetuned separately for each configuration; and (iii) remains effective across measurement campaigns separated by more than six months. We also investigate site-specific linear minimum mean-square error channel estimation using covariance matrices estimated from either synthetic channels or site-specific measurements. When combined with iterative detection and decoding, site-specific channel estimation achieves the lowest error rate observed in our datasets. Our finetuning code and measurement datasets are publicly available at https://github.com/IIP-Group/site_specific_training

0.47

GLCR: Global-Local Collaborative Routing for Multi-Task Electromagnetic Signal Processing

cs.LG ·2026-11-11 ·Fang Lu, Yao Lu, Zhuangzhi Chen, Sicheng Zhang, Shanqing Yu +3 more
benchmarkcode/data similarity 0.48
Abstract · 13 pages, 9 figures, 4 tables. Code available at https://github.com/Dawn-try/GLCR

Deep neural networks for electromagnetic signal processing are typically developed as single-task experts with fixed inputs and objectives, limiting cross-task transferability. Electromagnetic foundation models offer broader task coverage but incur substantial pretraining and inference costs. To balance accuracy and efficiency, we adopt model routing to dynamically dispatch unknown signals to matched experts within a heterogeneous pool. We construct HeteroSignal-7, a multi-task routing benchmark with 140,000 samples from seven datasets covering six task types, paired with seven classification and waveform-recovery experts and a unified evaluation protocol. We then propose GLCR, a two-stage routing method combining global dispatch with local discrimination of similar tasks. First, a lightweight one-dimensional convolutional neural network (CNN) with an additive-margin head predicts one of seven routing classes. Second, a gradient-boosted-tree specialist uses four physical statistics to re-evaluate samples whose top two candidates match a confusion pair automatically identified from validation errors. The pipeline is trained across the full signal-to-noise ratio (SNR) range and requires neither SNR labels nor noise estimation at inference time. GLCR outperforms all 19 baselines, achieving 96.16% routing accuracy and a 76.30% system score, exceeding the respective second-best baselines by 1.16% and 1.14%. It achieves the lowest routing latency among the compared methods at 1.43 ms per sample and reduces expected overall system FLOPs by 5.9 times compared with executing all experts. This work provides a public evaluation platform and an efficient, reproducible baseline for heterogeneous expert routing in electromagnetic signal processing.

0.41

Mean Spatial Frequency Decoupling for Learning-Based Uplink-to-Downlink Covariance Conversion in FDD Massive MIMO

eess.SP cs.LG ·2026-09-30 ·Melih Can Zerin
benchmark similarity 0.48
Abstract

In frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems, the uplink (UL)-to-downlink (DL) channel covariance matrix (CCM) conversion problem is studied to relieve the heavy burden of DL training and feedback required for channel estimation. Learning- based methods perform well up to a certain array size, but for a fixed dataset size their accuracy deteriorates with the number of antennas, to the point where simple model-based methods outperform them. This paper identifies a key cause of this behavior and addresses it. The mean angle of arrival (AoA) induces a phase ramp along the lags of the CCM. Since the oscillation rate of this ramp grows with the number of antennas, a dataset of fixed size becomes increasingly sparse relative to the variation that must be captured. We propose estimating the slope of this ramp from the UL CCM separately and mapping it to the DL band in closed form, leaving the learner with a residual that is largely insensitive to the mean AoA, which substantially reduces the performance degradation with an increasing number of antennas. The proposed scheme, termed deramping, is a combination of pre- and post-processing steps that applies to learning-based conversion methods without altering their internal structure, as demonstrated on three structurally different learners. Simulation results show that deramping reduces the covariance estimation error of all three learners under uniform, Laplacian, and Gaussian angular power spectra,keeps the interpolation-based learners ahead of a model-based benchmark at large array sizes, and improves downlink channel estimation.

0.21

RAIL-5G: A Challenging Real-World Dataset and Benchmark for AI-Based 5G Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Jonas Pirkl, Andreas Eidloth, Maximilian Kasparek, Tobias Feigl, Christopher Mutschler
publishedbenchmarkcode/data similarity 0.47
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Reliable radio-based indoor localization is essential for industrial automation, yet existing methods are often evaluated in environments that do not fully reflect the severe multipath and non-line-of-sight (NLOS) conditions encountered in real deployments. This limits our understanding of how AI, i.e., modern geometric, unsupervised, and semi-supervised localization methods generalize to industrial 5G settings. We present RAIL-5G, a public real-world 5G NR channel impulse response (CIR) benchmark recorded in an operational railway maintenance facility. RAIL-5G covers an 811m$^2$ indoor area with eight distributed radio units, robot-mounted user equipment (UE) trajectories, high-accuracy iGPS reference positions, and severe metal-induced multipath caused by train compartments and maintenance infrastructure. We benchmark geometric time-difference of arrival (TDoA), supervised fingerprinting, unsupervised channel charting, and self-supervised wireless pretraining methods. Our results highlight the difficulty of RAIL-5G: on the full dataset, TDoA reaches 7.02m mean average error (MAE), the best unsupervised method reaches 2.46m, and supervised fingerprinting achieves 0.52m. Self-supervised pretraining reduces the labeling effort by up to one order of magnitude, but the remaining gap to supervised learning shows that robust AI-based localization under severe multipath remains an open challenge. The dataset and code are available at https://iis.fraunhofer.de/rail-5g.

0.39

SPOC-Net: Single-Primitive Online Composition Network for GNSS Jamming Set Recognition

cs.CV ·2026-09-28 ·Zhihan Zeng, Kaihe Wang, José A. López-Salcedo, Gonzalo Seco-Granados, Zhongpei Zhang
similarity 0.47
Abstract

Reliable positioning, navigation, and timing support intelligent transportation, autonomous systems, and space-air-ground integrated networks. However, global navigation satellite system (GNSS) jamming recognizers that treat each mixture as a separate class are difficult to extend to new combinations. Therefore, this paper proposes SPOC-Net, which decomposes the recognition problem into identifying a set of basic jamming components. Multi-resolution time-frequency features and learned component queries provide evidence for each component type. A high-resolution branch estimates the number of active types, and a structured decoder combines this estimate with component evidence to select a valid set. For training, measured single-component records are the only physical samples used in gradient optimization. Their associated clean in-phase and quadrature (IQ) sequences are combined on demand during training to produce labeled mixtures with different relative powers and jamming-to-noise ratios. Separate measured mixtures from ten training-listed compositions support model selection and decoder calibration; six other compositions are reserved for final testing. Evaluation on 14,220 independently generated, conductively combined, and recorded radio frequency mixtures yields 80.69% exact-set accuracy and a 92.84% micro-averaged F1 score. On combinations excluded from model development, SPOC-Net achieves 80.89% exact-set accuracy, exceeding the strongest comparison method by 18.77 percentage points under the reported protocols.

0.27